Hello everyone,
Yesterday i disassembled my diamond to solve a problem with the keypad, that was protruding out of his place. I figured out that it was a structural flaw and with the help of my instruments i solved the problem.After that i assembled back all pieces, but when i tried to power on the device it works coz i can hear sounds and other stuff, but lcd screen is not powering up.
So i noticed that the ribbon flex cable was a bit damaged from the aluminium cover placed under the battery. I suppose that the problem is dued to that, but i'm not sure of it. So i need a confirmation that the LCD power is connected to that ribbon cable, so i can purchase the replacement. Thank you. The cable is the one in the attachement.
bump.
anyone??
up, noone knows the function of that piece?
yes, u need to change tat cable
yes, i supposed that. If someone knows the role of that piece i'll be grateful ;P
Related
i recently disassembled my tilt to find out if i could tighten the hinges because the hinge were loose but ended having problems with the keyboard. i hooked up the wire that connects from the keyboard to the motherboard. now the problem is that i could only use half of the character.
do you guys encounter this kind of problem? and did you guys fix it?
thanks
draztik_beast said:
i recently disassembled my tilt to find out if i could tighten the hinges because the hinge were loose but ended having problems with the keyboard. i hooked up the wire that connects from the keyboard to the motherboard. now the problem is that i could only use half of the character.
do you guys encounter this kind of problem? and did you guys fix it?
thanks
Click to expand...
Click to collapse
PM Mike, he will lead you in the right direction.
http://forum.xda-developers.com/member.php?u=335322
Buy a new keyboard with flex cable on ebay.
I replaced my tilt keybard (with silver keys) with the original all black keys.
The keys, the flex cable, the board ~ everything is one solid peace that's soldered and glued together, it's not removable (without damaging). The flex cable is actually sensitive and can break. If you try to mess with the keyboard, putting a lot of pressure on the silver part under they keyboard, or make a dent on the silver part under the keyboard (in the effort of trying to separate the keys and the board, which is impossible) ~ you might end up pressuring the flex board/wires and cause only half of the keys work and half doesn't, and the cap-lock and func light won't turn on.
Remember to get the keyboard with the whole frame and flex wires and not just the plastic keys by itself.
The whole black rim, flex cable/board and the silver bottom piece is all soldered together as one solid piece. The plastic keys are like sticker, lay on top of the board and flex.
(your board and flex seem broken anyway, but...)
If you only buy the keys without the whole board together, you will have to rip out the old plastic keys layer (because it's just a layer of sticker on top of everything) ~ do it carefully, or you might rip out the flex cables/board by accident.
Let me know if you want some pixs that I took when I replaced my keys.
draztik_beast said:
i recently disassembled my tilt to find out if i could tighten the hinges because the hinge were loose but ended having problems with the keyboard. i hooked up the wire that connects from the keyboard to the motherboard. now the problem is that i could only use half of the character.
do you guys encounter this kind of problem? and did you guys fix it?
thanks
Click to expand...
Click to collapse
Wad there possibly a alternative from getting a whole new board as i only replaced the screen mine.............
I had a similar problem when replacing the screen on my wife's Tilt recently. I took it apart a second time and put it together again very carefully, particularly with the small ribbon that connects to the motherboard, as I believe that is the ribbon that connects the keyboard to the motherboard.
Take a look at this video to see the part I am referring to: http://www.youtube.com/watch?v=96iXd5jG2-U#t=2m45s
Hi i have had an x1 since august but within a month its been dropped and then it was unable to show the screen, i opened my device to try and fix my problem but messed with nothing whatsoever, when i put everything back together it wouldnt even turn on anymore! all it did was charge and when it was fully charged there was a red light. can anyone help me? please im desperate to fix my phone. My first paycheck was spent on this and i loved it despite the numerous flaws! also i havent charged it in over 2 - 3 months. Also when i opened it the tape that connect the rear and the front is kind of messed up, would that effect anything?
The tape that connects the front and the rear is the cable for the screen, so if it's messed up, you might need to get a replacement.
here is a pic, the red part where its circled is where i think the problem is, it looks ripped off, i did have a hard time opening and putting it back together the first time also.
Sounds like (Or rather, looks like) you're screwed, as far as I can tell, if it's really ripped. Otherwise attempt to clean the contact points with some cleaning alcohol and Q-Tips - something might have made it's way in when you disassembled the unit and blocked the electrical signals.
ill try it, but if that doesnt work, would i be able to replace the flex ribbon? would acteone work?
got this checked out by my friend, he told me its the flex ribbon cable, thanks for the help btw. Does anyone know the cheapest place to get a flex ribbon cable from?
Still would like confirmation if its my flex ribbon cable before i spend 40 bucks on a new one. thanks!
Hi, I am new to this forum. Sorry for posting here but I think I have similar or same problem with my xperia. Few days ago I drooped my xperia and then I could not turn it ON. I opened unit, the flex cable was detached.
After attaching the flex cable. I could turn the unit and it booted normal but no response on touching screen I even tried to align it but it did not respond. I turned off the unit. After trying turning it back ON only back light of the screen turned on (no sony logo, no xperia logo no winmo).
I tried to turn it on few times but same result. Even tried to soft reset and hard reset it but no difference only back light. Is it because of flex cable or because some thing else? I can`t even go in to 3 color screen. Please help. Sorry for my bad eng. Thanks.
Hey guys,
The USB port of my HD2 broke off and I was forced to replace the motherboard. When I assembled the HD2 again, I could immediately see that there was something wrong with my screen. The screen couldn't display full color (only bright red/orange/white/dark green/cyan accents). Also, the 'hang-up button isn't responding anymore after I replaced the motherboard (and flexcable).
What happened? Is there something wrong with the lcd display or did something go wrong when I (dis)assembled the phone? I took the motherboard and the flexcable from another HD2 that had a broken display.
Thanks in advance.
bilaba70 said:
Hey guys,
The USB port of my HD2 broke off and I was forced to replace the motherboard. When I assembled the HD2 again, I could immediately see that there was something wrong with my screen. The screen couldn't display full color (only bright red/orange/white/dark green/cyan accents). Also, the 'hang-up button isn't responding anymore after I replaced the motherboard (and flexcable).
What happened? Is there something wrong with the lcd display or did something go wrong when I (dis)assembled the phone? I took the motherboard and the flexcable from another HD2 that had a broken display.
Thanks in advance.
Click to expand...
Click to collapse
So you completely voided your warranty through HTC and tried to fix the device yourself, then screwed it up. I'd still say send it to HTC and ask for a repair. I don't know if they'll do it or not, unless you used official parts. I know they do out-of-warranty repairs, but they'll charge you.....
Yep you screwed up the repair, those ribbon cables need a delicate touch & any handfisted moment ends up with what you have got now ...
Another careful strip & inspection of all ribbon connectors is needed ...
I bought it as a second-hand phone. The guy didn't give me a reseat and the HD2 was flashed a WP7 ROM.
For the button problem, how are you turning your phone on without that button? do you hear/feel it click when you press it? If not its just misaligned.the buttons are on a flex ribbon cable with two holes on each side. it fits on the plastic middle frame of the phone which has two small spikes coming out of it... it has to be perfectly placed for your buttons to actually click..
if the flex ribbon is broken however you can buy one off ebay for arround 10$ any will do, mine is not original works fine..
for the screen you could have messed up the lcd, did you separate from the glass-digitizer? if you did you probably screwed it up.. its not a easy thing to do.. also was not necessary for your repairs
the connection to the motherboard might not be all the in and clipped which might cause your problem... (being that two of the little pins provide voltage and ground while all the others provide data information if one of those pins is not in all the way a piece of data might not be displaying for example a color. Never seen that happen its theoretically possible thou)
well I have only opened my phone 3 times and dont claim to be a expert.. but this is my take on it... Good luck!
@pablow Thanks for the detailed response.
The HD2 is only turned on, after I place the battery. Otherwhise it won't start.
I hear a click on the (broken) 'off' button, everytime I press it. I also noticed that the inside of not all of the 'spikes' are empty. I can see a bit of the flexcable in the spike of the broken 'off' button. The spike of the (working) 'call' button is empty.
I think that the flexcable hasn't been connected securely to the motherboard. I'll try connecting everything again tonight.
not that it makes much difference but HTC wouldn't of fixed it through warranty because of usb damage anyway
I thought so, thanks for the heads-up anyways.
[Solved] Display is fixed
Update:
I disassembled the HD2 and reconnected everything (from coax to flexcable). Fortunately it worked! The display is how it should be.
I have another problem now. All of the buttons don't work now, exept for the dial button. Do these buttons break so fast? It's annoying as fuark, because I have to disassemble it another time in the future to fix the buttons.
I also couldn't re-attach the volume control tab when assembling the HD2.
Hi
I tried to replace my battery and after assemble it back i only get a black display when turning my m7 on.
I broke this little plastic thing from the display cable off (look in attachment)
Is this thing essential for a working display? (i thought i can fix it with a drop of glue)
Should the display work when the backcover is off the device? Because there are some connectors on the backcover....
cheers
00Nuclear00 said:
Hi
I tried to replace my battery and after assemble it back i only get a black display when turning my m7 on.
I broke this little plastic thing from the display cable off (look in attachment)
Is this thing essential for a working display? (i thought i can fix it with a drop of glue)
Should the display work when the backcover is off the device? Because there are some connectors on the backcover....
cheers
Click to expand...
Click to collapse
Shouldn't have done that, I think you accidentally broke something. I'd send it to a HTC service center. But that's gonna cost you probably.
nah, official repair isn't worth it. The phone is more than 2 years old...
and yes i think i broke something... thats why im asking
You're gonna have to be good with a solder and a couple of tiny wires if you want to revive your phone.
00Nuclear00 said:
Hi
I tried to replace my battery and after assemble it back i only get a black display when turning my m7 on.
I broke this little plastic thing from the display cable off (look in attachment)
Is this thing essential for a working display? (i thought i can fix it with a drop of glue)
Should the display work when the backcover is off the device? Because there are some connectors on the backcover....
cheers
Click to expand...
Click to collapse
You definitively need this clip to be intact so the flex cable sits firmly in place otherwise you'll have bad contact between the cable and the pins.
If you don't want to send to HTC for repair you'll need at least to send it to your local electronic repair shop so someone skilled with the proper soldering tool (not the standard iron you have at home) can replace the connector. BTW some of these clips must be lifted from the cable side and some other from the opposite side of the cable, so next time use tweezers and apply very light force on each side you'll find from what side it must be lifted.
LCD should work fine with the back cover removed, afaik. Connectors in the back cover are often for antennas but I wouldn't recommend to run the phone with antennas disconnected to avoid damaging the radio chips (reflected power).
If you are from the US, you can easily find this connector on ebay for about 10$. I'm sure it won't be that much expensive to repair if you bring the new connector and the phone already disassembled to your local repair shop.
Btw are you sure its only the LCD? When trying to boot the phone can you here the HTC theme or does it vibrate? Recognized by your computer when connected with usb?
thx for your response
I found an replacement part on ebay but first i have to look for someone who can solder this for me.
When i try to turn it on it only vibrates without a htc theme sound and there is no display reaction.
The other thing i mentioned is that the phone gets very hot in the middle (should be the cpu) where i dont know if it should get that hot.
I have to try the pc connetion again and let you know asap.
00Nuclear00 said:
thx for your response
I found an replacement part on ebay but first i have to look for someone who can solder this for me.
When i try to turn it on it only vibrates without a htc theme sound and there is no display reaction.
The other thing i mentioned is that the phone gets very hot in the middle (should be the cpu) where i dont know if it should get that hot.
I have to try the pc connetion again and let you know asap.
Click to expand...
Click to collapse
I'm not really worried about the absence of HTC sound when booting, if your phone is on silent / vibration mode, it will only vibrate when booting. If your computer does detect it once booted, then I guess the broken connector clip is the problem.
---------- Post added at 09:49 AM ---------- Previous post was at 09:27 AM ----------
Here is a video about the connector replacement, it doesn't look that hard to replace but wouldn't recommend to do it yourself if you never soldered electronics before. Soldering isn't that hard but you need some practices and knowledge to make good joints. I don't think your phone motherboard is a good candidate to practices yourself if you never did it before. You'll also need a really tiny tip for your iron, probably a type "L", 50/50 solder + some flux. Flux must be cleaned after use to avoid corrosion. The most difficult when soldering on motherboard, imo, is to find the right temperature. If your iron is to hot, you'll damage your connector. If its not hot enough, solder will take more time to liquefy and some heat will be absorbed by surrounding components which can cause irreversible damage.
Easy fix mate
You don't need to replace the connector, I've done this before, it is just the connector clip that has come off and it goes back on reasonably easily.
You will need a good magnifier.
You will need a good light source.
The phone held securely on its side with the socket pointing up.
Some masking tape on the loose part because it WILL go "ping" into the distance if you don't and you will not find it.
Look at the other connectors to see the proper orientation for the part, mark it with a permanent marker on top and at one end.
The insertion looks difficult, it isn't too bad, keep the part nice and straight and the motion is kind of like clicking it down on the ribbon.
Forget replacing the connector, that is 100 times harder.
If you do lose the loose part I have one or two laying around.
Good luck.
Hello guys, Yesterday i changed the battery on my phone. After putting everything back together my screen stopped working, with no image and no touch function. The cable on the right bottom is connected but perhaps i damaged it in some way..
The phone is working properly, if I connect it to an HDMI it works.
Any ideas on what I may have done wrong and the solution?
I took it to a shoo and they say I have to replace the whole screen (USD 100 approx) which seems too much..
Check this coil. If it's shorted it's ok, if not make jumper on it. Also check filter (small bricks) under the LCD flex connector and LCD flex itself if it's not teared. Those are common damages which can be done disassembling this phone.
Yup it's the LCD flex that is dammaged.. Is it possible to repair? I'm guessing that on a shop they will want to change the whole LCD screen..
Unfortunately there is no way to change flex only. If it's damaged You have to change whole screen.
Ok, oh well that's life... thanks for the help though!