I find myself frustrated when I need the GPS fuction on my Tilt, but then it takes 2-3 minutes to locate me from a cold start. That can feel like hours when I am late and lost. When it is warm, the GPS fixes in 5-20 seconds.
It seems a program that keeps the GPS in a state of warmness (maybe starting up and getting a fix every hour or two) would really help me out. I don't have a pocket full of batteries, so leaving the GPS on all the time is not an option.
Is there something like this out there, or do I have to try to build it myself?
Thanks for any help,
Will
wasilvers said:
I find myself frustrated when I need the GPS fuction on my Tilt, but then it takes 2-3 minutes to locate me from a cold start. That can feel like hours when I am late and lost. When it is warm, the GPS fixes in 5-20 seconds.
It seems a program that keeps the GPS in a state of warmness (maybe starting up and getting a fix every hour or two) would really help me out. I don't have a pocket full of batteries, so leaving the GPS on all the time is not an option.
Is there something like this out there, or do I have to try to build it myself?
Thanks for any help,
Will
Click to expand...
Click to collapse
I've been thinking of the same thing...
2 things you can do:
1) use network location when possible. It really is better on batteries and much quicker.
2) Use a program like tasker that flips on GPS for an alotted time to get a fix every so often. I'm thinking about using a multiple profile setting that will automatically run a GPS fix when I leave my work or home networks. But it would also run once every hour when I'm away from those networks and only when I'm away.
Related
I've been using my at&t tilt with tomtom flawlessly since I purchased it earlier this year. A few weeks back while visiting the cemetary (paying respect to some past relatives), I tried using tomtom to help plot down where some of the graves were located.
After waiting a few minutes for the gps to acquire a signal, it eventually got 1 bar, but showed my location about 220+ km(~150 miles) off! It would also show my travelling speed to be incredibly fast (like the speed of a plane), but would eventually slow down to drving speed and it would show me driving along a road... I never watched it long enough to see where exactly it was going (or where it was going to end!?)
Keep in mind this is in a cemetary, no where near any obstructing trees or buildings, nothing but blue sky. I tried turning the radio off (airplane mode) and back on a few times, reloading tomtom etc, but everytime it would show the same thing, starting back somewhere flying really fast...
So geez, I thought that was kinda eerie.. so later that day (and away from the cemetary) I tried it again and it seemed to work OK. But lately I've noticed this intermittent behaviour again, and the only resolution I've found was to simply do a soft-reset and everything would appear to work ok. Has anyone else had this similar issue?
Is it simply:
a) a gimped up qualcomm chipset, or
b) a bug in the OS/driver/stack, or
c) or is my phone posessed???!
This is my problem... It finds many satellites in the sky... connects... stay about 5 seconds like this... Then connection gones... Same thing both for TomTom and GPS Tuner program... I've stayed for 15 minutes under sky... always same loop... Any ideas to solve it? Remedies?
Same for me sometimes. Got last SwiftBlade ROM and recommanded .025 radio
I've been using swiftbl 5.5 for a long time and really like his rom... also .25 radio like you did...
ok i'll try to switch to 5.6... I think key parameter is radio rom but anyway... it seems there is not any other remedy...
I'll be happy if someone states another solution...
emre_aachen said:
This is my problem... It finds many satellites in the sky... connects... stay about 5 seconds like this... Then connection gones... Same thing both for TomTom and GPS Tuner program... I've stayed for 15 minutes under sky... always same loop... Any ideas to solve it? Remedies?
Click to expand...
Click to collapse
Yep... same thing was happening to me - turn off A-GPS (Diamond Tweak or Advanced Config can do this)
Use only QuickGPS (this is different to A-GPS)
Does a soft-reset help?
I appreciate this isn't really an acceptable fix, but it might help quantify how severe the cause of the problem is.
Mathew
it seems it is solved by itself now... i don't understand really... So it's all about signal quality i guess... time to time good time to time lousy... so there are not enough satellites on Germany... noone believes this, right?
But I'll keep switching off agps in mind... thanks everyone...
Your symptoms are not indicative of signal quality problems, but as you're sorted that's all that matters.
Mathew
Well, now that most of us have the Fuze GPS working, one thing that would nice is a little app/service that wakes the GPS up several times a day and attempts to get a fix.
Rather than waiting until I need to use the GPS, then turning it on and waiting for a fix, it would be great if it had at least connected sometime during the day.
Thoughts?
ryanrands said:
Well, now that most of us have the Fuze GPS working, one thing that would nice is a little app/service that wakes the GPS up several times a day and attempts to get a fix.
Rather than waiting until I need to use the GPS, then turning it on and waiting for a fix, it would be great if it had at least connected sometime during the day.
Thoughts?
Click to expand...
Click to collapse
I think the software you are looking for is called QuickGPS. If the satellite position information does not expire your device should get a fix within under 10 seconds, so there is no need for any additional software. Just use QuickGPS so that the satellite positions are always up to date and that's it.
http://www.geoterrestrial.com/
I think this is what you are looking for.
Check out their FAQ.
DeepThought said:
I think the software you are looking for is called QuickGPS. If the satellite position information does not expire your device should get a fix within under 10 seconds, so there is no need for any additional software. Just use QuickGPS so that the satellite positions are always up to date and that's it.
Click to expand...
Click to collapse
I think he means more so after a soft / hard reset it can sometimes take several minutes to get a full fix even after running quickGPS.
I have had it take 4 - 5 minutes even after running quickGPS. It started with one satellite and slowly grabbed 1 every 20 - 30 seconds until it had about 7 then it got full lock. Once that was done reacquiring a lock took no time at all.
I wonder if it goes to "sleep" or something as a power saving feature?
That's all well and good if you are in the same spot as you were when QuickGPS ran last. However, my problem with many GPS systems is that I don't use them often enough to maintain a sync.
What would be ideal is if GPS would stay on all the time and/or there was enough battery to keep GPS on all the time.
If you use your GPS to drive to your dentist, for instance, then drive to work without your GPS because you know the way, then need GPS to meet friends for dinner, your GPS cache is based on your dentist, not work.
What I'm asking for is an app that kicks off GPS (presumably) while you are at work. If this happens multiple times a day, it shouldn't take much battery life, but your data would always be up to date.
Alternately, is there an easy way to just run QuickGPS multiple times a day?
Moved to software.
Try Beeline GPS or Visual GPS.
http://www.visualgps.net/VisualGPSce/default.htm
http://www.visualgps.net/BeeLineGPS/default.htm
I use it for the same job.
Hey guys,
Well I have just got the new Hyper Dragon rom on my phone and I am looking for a possible hack...
I am going on holiday in a few days skiing in the Alpes and have a GPS tracking tool called SatSKI, its pretty wicked and tracks your days activities.
Problem is, when it goes into standby or the screen is off then the GPS goes off, even though the program is still running. I had this same issue with TomTOM a while ago.
Any help would be great.
Cheers guys
Mike
Look into TrackMe, it has a boatload of features and has a Screen Off feature which keeps the phone on but turns the screen off for battery savings.
You can also try DeltaLock. But you gotta make sure the phone doesn't turn off, so you'll also have to modify the Power settings.
up
in the same boat, would like to run my satski on the kaiser with the screen off, but obviously keep the program and GPS running?
The above 2 programs are no good, as satski has the piste maps, which is what you want to use it for
You can run Trackme in addition to your ski program in the worst case...
Satski and Switching off
mikeseaman3000 said:
Hey guys,
Well I have just got the new Hyper Dragon rom on my phone and I am looking for a possible hack...
I am going on holiday in a few days skiing in the Alpes and have a GPS tracking tool called SatSKI, its pretty wicked and tracks your days activities.
Problem is, when it goes into standby or the screen is off then the GPS goes off, even though the program is still running. I had this same issue with TomTOM a while ago.
Any help would be great.
Cheers guys
Mike
Click to expand...
Click to collapse
Hi the way to keep your phone on is to change the settings on switing off a program after a period of time , in setting programs normally are set to switch off after 30 min if not used . Also be sure to use the Satski Lock screen in the Satski Menue this will also save your battery.
JC
Hi all.
I hope someone here can help me with some answers or at least help me testing.
My problem is, that when I use my phone when running, the training session isn't registered correctly. It always log my routes between 25 and 30 % shorter then they are.
I've tried using different programs like Runkeeper, Endomondo, Cardiotrainer, My Tracks, and others.
They all show the same short route log.
I've tested all the programs with my old HTC Desire, and here the error is always less then 5%
Anyone else seeing the same problem??
Maybe someone could test it on their phone the next time they're going for a run??
My guess is, that there might be some bug in the software of the phone, that makes it report to short distances between every point that it sends to te training software. (maybe something to do with the accuracy of the GPS, and how this is offset is calculated into the positiondata??)
Anybody got a good Idea where to start??
m_primdahl said:
Anybody got a good Idea where to start??
Click to expand...
Click to collapse
Hdsf
Same here, tried a couple of the running apps. Sometimes it helps to restart the phone before running. Google navigation and offline nav apps (Sygic, TomTom, Navigon) seem to show more accurate GPS data. Speed related?
http://forum.xda-developers.com/showthread.php?t=1886999
man up and get over it
this is how its gonna be