Hi,
Sorry if this is a basic problem but I'm a newbie and having problems synching. I did post a while ago when my XDA died, but couldn't follow the instructions to resurrect it as it wouldn't sync.
Just had it replaced, and the new one won't synch. So I'm guessing that there must be something wrong with my Outlook or Mobile Device Centre settings.
MDC says that it is synching, but it takes only a split second and nothing gets transfered. I've tried synching only contacts or calendar (only one option) but still the same result.
Any suggestions most gratefully received.
More info needed.....
Howdy™
It would be helpfull to know what version of Windows Vista (32 bit, 64bit, home basic, home premium, etc....) as well as the version of Mobile Device Center you are using.
Now as far as your problem goes, it seems to me that the issue may well lie with the software on your PC as the issue has presented itself with 2 different devices with the same results. A common step for resolving software issues is to uninstall and then reinstall the program(s) in question. You can do this first for MDC and if the problem persists, then try doing the same with active sync as well. You can re-install the programs either from the Getting Started CD that came with your phone or from Microsoft's own website. Doing so should correct your issues with failing to sync.
I'm assuming you have already checked your personal firewall to make sure WMDC and its components are allowed to communicate.
Find scanpst.exe in your MS Office directory and run it against your mail file (you can get the location from the properties in Outlook). Then delete and recreate your partnership. Corruption in your PST or OST file can cause syncs to fail and is often overlooked.
If that doesn't work, post the error code that AS is reporting on the device.
One problem is that I don't get an error code. Active sync and MDC both say successful sync! I can see all the folders on the phone too.
I'm scanning PST files for errors, then will try again. I'll then try to uninstal and reinstal MDC and Active SYnc if there is still no joy.
Oh, and I've tried running with Firewall off and still the same problem.
I had a similar problem to this recently.
Have you checked the settings for the connection. I found that a proxy had been defined but wasn't needed.
Well, still no success guys.
I've reinstalled WMDC. Latest version at 6.1.6965. Active Sync won't load on Vista, replaced by WMDC. I've deleted partnership and re-paired.
I've run scanpst.exe and repaired the few faults.
I've turned firewall off.
Running Vista Home premium 32 bit.
The bloody thing THINKS it's sync'ed so no error codes, but nothing syncs over. Going proper crackers over this.
danhand said:
I had a similar problem to this recently.
Have you checked the settings for the connection. I found that a proxy had been defined but wasn't needed.
Click to expand...
Click to collapse
Where are the settings Dan? On the PC or the XDA?
Sorry; wrong about the codes. Nothing showing on the PC but on the XDA it says "server could not be reached" shows the code 0x80072EFF.
I think this is the same error code i was getting.
The setting is on the device, under settings / connections / connections "manage existing connections. Then choose te proxy settings tab and uncheck " use a proxy".
Dan
Thanks.
But.... Still not bloody working.
It must be something with my Outlook setup. Any ideas how I might test this out?
I don't know if you've flashed a new rom on it. My phone wouldn't synch when I flashed garmins dk2 rom but synched fine with all others. Try it on another Vista machine and see if it works. If it does, maybe reinstall outlook after saving your data.
I’ve had the diamond for approx 1 month and regularly sync it to my work and home pc running XP and Vista respectively. Up until now I’ve never had a problem with activesync to any of my past smartphones or PPC’s.
My diamond has all of a sudden decided that it doesn’t want to sync anymore. It connects ok and I can transfer files back and forth it just won’t sync.
I’ve searched the forum and found similar symptoms but nothing has worked.
I’ve deleted the partnership from the device and both pc’s, created new partnerships which on first connection does actually sync (sometimes) but from then on either says “looking for changes” or “synchronising” until it times out giving the error message “Synchronising cannot be completed successfully. Reconnect your device and try again. If the problem persists, see the Microsoft Activesync Troubleshooter in Microsoft Help on your desktop computer”
I’ve tried the help, I’ve let it do its own diagnostic, I’ve unchecked the “enable advanced network functionality” option in USB to PC. I’ve soft reset, hard reset, the only thing I haven’t done is re-flash a new rom.
Does anybody know if flashing a new rom/radio will solve the problem. I would normally just try it but I spent an hour yesterday after I hard reset putting everything back to the way I like it only to find that it synced the first time but wouldn’t work again.
If anyone has any other suggestions before a re-flash I would welcome them. Otherwise I’ll bite the bullet and hope for the best.
I’m currently running Duttys V1.6 Radio version 1.00.25.07
I Had this problem
Hey fella, i was having this problem and after doing a little research i found the following.. If you constantly activate and deactivate the mobile (pair and unpair) you can corrupt A/S on the system. The only way i got around this was to uninstall active sync and re-install it again.
Hope this helps...!
I've never been able to get activesync to work harmoniously between relationships with two PCs.
Most syncs with a second machine after successful syncs with a first tend to result in errors that require my intervention, especially if an item of data has been changed. Drives me mad sometimes, and I often need to spend more time fixing these errors than it would take to manually update stuff across my three devices. I get the feeling the comparison/processing engine activesync uses is no where near sophisticated or clever enough to carry out the processing, and when it does have errors, the scope for my intervention to help it in its quandary are fairly hopeless.
I'm hoping that as devices like the diamond bring this lets face, it fundamentally great, but nevertheless fundamentally flawed platform to the masses, then Microsoft will have to put more effort into activesync and how it copes with relationships across two (or perhaps even more in future) PCs.
Ps, neomagik, actual connection, which sometimes has hiccups, has never been a big problem for me, (a few minutes in the various settings usually sorts these), but I've been using activesync for about 4 years before my diamond with with my HP4700 and various double PC partnerships along the way, and can confidently say that the problems I describe are not device related, but are the result of activesync inadequacies.
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.
Been there, done that....
Suprised you've not had this issue earlier...I've been suffering with Activesync issues for years
There are lots of ways to diagnose and resolve but perhaps you just might want to get the sledgehammer out...this mostly works for me....(I hope your familiar with Outlook!)
On one PC (I would use the XP "older" Op system one) export your synced data from Outlook to a .pst or .ost file for backup and later import (after delete & tidy stuff you no longer need in Calander/Contacts/Tasks, etc)
then
Delete all your data in Outlook, create a new empty .pst (connect to same), delete old .pst
then
delete partnership with device (to be sure), and remove same data (Contacts/Calander etc) from device
then
You can then check the exported/saved .pst for errors (I can't remember the MS programme...google for it), once satisifed OK import all you info back into Outlook
then
Synchronise with new partnership to device.
Hopefully so far so good
(sometimes I even rename the device-partnersip etc in case something "residual" there stays behind and corrupts something )
Next
Prior to connecting device with WORK PC:
Delete all previously synced data in Outlook and delete partnership there. I then make sure that in Activesync (before establishing new partnership) that I click option for one way data transfer ie replace items on computer with those from device
then
...plug in and establish new partnership, hopefully no problems....data populates computer from device. Once established then put back how you prefer data to be transfered (if there is a conflict etc)
Return home and partnership there still synchronised, Hopefully this works
If you find that there are still issues, you can un-Check and Check each synced area (Contacts, Calander, Tasks, Synced Files) independently to see where the conflict is.....
...I have found conflicts mostly occur with:
i) Calander: Birthdays/Anniversarys (probably as they are extended recurring events)
ii) Calnder: Meetings etc that might be recurring
There are real issues if using old versions of Outlook (2000 for me at work ) syncing with most recent ones!!
Sorry for the mad typing but best I can do for a "Quick" reply....Good luck !!
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
Presume you have done the most obvious, and that is un-install and re-install Activesync and the Vista sync programme on both PC's ?
neomagik said:
Studz, I know what you mean, I often get errors where it asks you to "resolve item" and after a while of playing it usually works. This is different, it won't sync at all.
Click to expand...
Click to collapse
I had this once I think a year or so back. Tried so many things that I can't remember what finally fixed it.
I think a good place to start though, like PJ6363 says, is do a clean sweep... re-install activesync on both machines, and I would also reinitialise your Outlook Account (.pst) on the master PC and delete on all other devices.
Good luck, and tell us how you get on.
neomagik said:
Thanks fyew-jit-tiv but I've tried that already. Also, it wont sync to WMDC in Vista either and it's unlikely that the same fault occured in AS and WMDC at the same time. This is what leads me to believe it's the Diamond and not the PC's.[/QUOT
Neomagik... Sorry i could help any further fella.. As i said in last post i had this problem and i just re-installed A/S... The only other thing i done after i un-installed A/S was to run a registry cleaner.!
P.s i don't think is down to the Diamond. I Was having this problem with the Touch (elf) too...
Click to expand...
Click to collapse
well, i have similar issue w/ sync and finally, i solved the problem by changing the sync cable.
Thanks folks,
I'm going to try all of these.
@ Snufkin, I'm using two different sync cables so I know this is not the problem.
My diamond did funny things when the screen would turn off quickly after connecting because i set it not to charge when connected. Gave all sorts of weird errors.
Now, screen stays on because i want it to charge and sync completes now, still takes a while though.
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
pedmond said:
You guys are aware that WM6.1 has a problem syncing with 2 computers, aren't you?
Some people claim they managed to do it and I believe them, only none of the voodoo worked for me. Never had that problem with WM5 and 6.
Click to expand...
Click to collapse
there is a long thread about this issue somewhere conclusion 100% in wm 6.1 you can not sync with 2 PC. this is a wm 6.1. related problem.
i can sync with 2 pC my athena with wm 6 but i can not do it with the diamond or trinity. don't even try it. it will mes you the whole outlook!
Sync with WM6.1....off course u can!
Been syncing my Kaiser and now Diamond with WM6.1 for well over a year with 2 PC's. Must have done it at least 20 times with various devices and ROM's. Kicker is that my work has W2000 & O2000, and at home I use XP and O2007....still works!!
I'm not saying I don't occasionally have issues...but I do carry more than 1000 contacts and and extended calander with numerous recurring entries
.....like I've posted before (as many others) there are issues, but nothing insurmountable. I'd be lost if I could not sync my work PC, homw PC and PDA
Read around and you'll see........
here u are, i found the thread:
http://forum.xda-developers.com/showthread.php?t=377823
i tried long and hard to sync my diamond with 2 pc. all i got is errors and double tasks and appointments. got tired and gave up! my contacts list is too precious to play with!. i do have over 600 contacts and 1300 numbers (tlf, mobile, fax).
in order to have my diamond sync with 2 pc i syinc it with one, then i sync my athena and sync with the second....lol...this is my way to have 2 pc and 2 htc devices in sync.
I had my Diamond (and previous Trinity) synced with 2 pc's. No major problems until now.
It's dead
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
neomagik said:
OK, I have tried the steps suggested by PJ6363 with no success. It won’t sync to the first pc let alone the second.
I then decided to dig out the old C500. After blowing the dust off I hard reset to clear out any info left on it. Plugged it in and hey presto, immediate sync. Unplugged it and tried again, another sync. Added a contact whilst synced and it updated straight away.
I then deleted all partnerships on pc and diamond and plugged it in. It went through the usual setup and connected to the device as before but surprise surprise, no sync.
Does this not mean that the data on the PC is fine and it is a problem with the Diamond, possibly a hardware problem?
Unless anyone else can suggest anything I’m going to flash a new rom but I have a strong suspicion it will not make a difference.
Click to expand...
Click to collapse
It looks like something other than what I have been pointing out....see here: http://forum.xda-developers.com/showthread.php?t=377823
I think you need to get serious and re-install the actual software itself on the device (hard reset), appears that Activesync on PC's is good...but would re-install there anyway!!
Look at it this way, you have found a sweet excuse to update your ROM withthe latest version and clean up your contacts/calander etc....should not be an issue with a fresh ROM install (try SwiftB 6.0....excellent!!)...let us know how you get on
Ah ha....forgot something critical...if you are syncing using older version of Windows (2000) or Outlook ...or any issues syncing for that matter, then I found that you MUST go to Settings->Connections->USB to PC and turn off Enable Advanced Network Functionality...have you done this?
I wonder if anyone can help me with a somewhat self-made mess. I've been able to sync fine with my Vista desktop using WMDC. However, I had some recent problems with media player trying to sync every god damn usb flash drive that I plugged in and on one forum somewhere I unregistered portabledeviceapi.dll using regsvr32.
I since found another solution to the annoying media player problem and re-registered the dll.
Unfortunately device center seems to have lost all my sync information and when I connected my Kaiser all the pim data disappeared! I managed to restore it as I back up every morning using spb backup. Interestingly the HanDbase sync module worked fine when I connected as I think it works separately from ActiveSync.
Can anyone make any suggestions as to how I can pair my Kaiser again with my PC without losing my contacts and diary? Ideally I'd like an "overwrite PC with data on mobile device" but you can't change these options until you make a connection, by which time everything has disappeared!
I'm afraid I can't speak with too much authority on this one as I only Sync with an XP laptop, I do connect my Kaiser to a Vista machine every now and then but it's only when dumping POI updates to TomTom and similar.
Unless I'm getting the logic wrong, or missing a crucial element, couldn't you set-up the sync between the PC and the PDA (with the PC then 'overwriting the PDA data with nothing'), then define as you mentioned that the PDA's contents have priority. Next restore everything from your spb backup, and then the next time you sync surely the setting made previously to give the PDA priority would mean everything is taken from your (spb-restored) PDA over to your desktop?
It's a bit clumsy and long-winded I know, but could it work?
Regards,
Rob.
Well I had everything backup up just in case. I actually reinstalled device center after downloading from the microsoft website. Everything just worked again after going through a long sync the first time. There were maybe a couple of duplicated calendar entries, not much to get upset about.
Will try not to go breaking things in future! Thanks for your suggestion.
Hi, not sure if this is the correct forum for this, so apologies if not.
I'm trying to get my Kaiser to synce with my pc, i've set up a partnership and it connects and starts to sync but always gets an error which is only ever described as "network error or internal desktop error" which isn't very clear as to the problem or possible solution.
I'm running Vista, with Mobile Centre 6.1, and Windows Mobile 6 Pro. I used to be using Outlook 2002 on the PC, but having recently rebuilt it am now using Outlook 2007, with the same .pst files and email. My phone won't sync the email anymore, it does everything else fine as long as i remove the email from the sync settings. I've tried setting up a nw partnership, and deleted the old partnerships from both the phone and PC but it doesn't make any difference.
It used to work fine before i had to reinstall my OS and everything on the PC, which is quite frustrating !
Can anyone shed any further light on this for me please ?
Hi guys,
I tried to sync the X1 with my PC (on XP thus only active sync 4.5 works) but it causes the phone to hang.
I have tried hard-reformating and strangely it works on the default panel but not on other panels. It hangs up.
Anyone has encountered this problem before and has any solutions?
Thanks.
I also have the problem but nobody here obviously cannot help,
although it's impossible that no one makes sync here!
I get error 0x86000107 and I'm stuck with it.
Reinstalling WMdevice center didn't change anything.
Well at least u have an error code.
Mine jus get hung up!
doministry said:
I also have the problem but nobody here obviously cannot help,
although it's impossible that no one makes sync here!
I get error 0x86000107 and I'm stuck with it.
Reinstalling WMdevice center didn't change anything.
Click to expand...
Click to collapse
doministry said:
I also have the problem but nobody here obviously cannot help,
although it's impossible that no one makes sync here!
I get error 0x86000107 and I'm stuck with it.
Reinstalling WMdevice center didn't change anything.
Click to expand...
Click to collapse
That error is usually associated with a lot, >100, of changes to contact information to be synch'd in one go.
There are various solutions on offer, the one that has worked for me is to remove the partnership with the PC and re-establish it. Make sure you have a backup of all your PIM data first as deleting the partnership deletes the data on next connection.
deedee said:
That error is usually associated with a lot, >100, of changes to contact information to be synch'd in one go.
There are various solutions on offer, the one that has worked for me is to remove the partnership with the PC and re-establish it. Make sure you have a backup of all your PIM data first as deleting the partnership deletes the data on next connection.
Click to expand...
Click to collapse
I will try that.
How to remove partnership?
PPCPim backup is perfect for that backup so no worries here...
Delete it from WMDC/AS on the PC. Got XP this end so not totally sure where it is in WMDC.