hi...i recently hard spl my touch pro 2 by tmobile with a hard spl meant for the sprint and att version of the phone...flash the Energy Rom, and now i cant get the "Toch Pro 2" splahscreen off...its the 1st splashscreen....anybody have any ideas on how to fix my problem? also, i heard if i flashed the hardspl again, it would clear the slashscreen, but i cant find the proper hardspl for the Us Tmobile version
you shouldn't have flashed the HardSPL for Sprint on your T-Mo TP2. Sprint is CDMA, T-Mo is GSM. flash this HardSPL:
http://forum.xda-developers.com/showthread.php?t=550131
sorry about that
oh..im sorry..but that is the hardspl i flashed...i get a startup screen that says "Touch pro 2", which isnt on the tmobile us version
i think its the Energy Rom startup screen that i cant get rid of...i should of never tried 2 flash such an expensive piece of plastic
If you want to replace the initial boot screen (the first one with the red writing on it), find the TMobile splash screen in whatever image format, and follow the directions here. But FYI, it's not bad/harmful or anything to have that different boot screen, that's perfectly normal with most ROMs here. Anyway, hope that helps
The easiest way to return your "stick together" splashscreen is to install the tmo test shipped rom
http://xda.caspersworld.co.uk/Downl...31.2_Radio_Rhodium_3.44.25.17_Signed_Test.exe
that will return the splash screen to normal and the radio will be the closest thing to final shipped rom
then flash cdguider's rom which is a rebuild of the original
http://xda.caspersworld.co.uk/Downloads/Rhodium/cdguider_TMOUS_Shipped_Rom_1.20.531.4.rar
that should return your rom to normal.
thanks! that did the trick, ur awesome
Closed.
Dave
Related
Hey Chaps,
Just thought earlier today i'd have a go at upgrading my phone with the new HTC firmware for my Vodafone Kaiser. First i tried it on it's own only to find the 'vendor' had blocked the upgrade, then i ran the HARDSPL software, when it rebooted my phone to the tri-colour screen i stopped pressing enter on the batch file and ran the HTC upgrade again! ... success - sort of; the upgrade got to 15% and stopped with a connection error (my usb's dodgy i think), then when the phone rebooted to the tri-colour boot loader it'd a) no longer accept the HTC Rom (vendor thing again) and b) become irritatingly broken.
Is it possible to flash an older vodafone rom to the device? if so, where can i find such a beast. Or does anyone know of any devilish ways to put the new rom on using the bog standard bootloader?
Thanks in advance big time to any clever phone experts who can de-brick my... er... brick
Dan.
your supposed to install hardspl before upgrading it if you try it on its own it will brick it at least thats what i heard from the stickies
azazelx, he has hardSPL installed, anyway.
@JimmyJangle: flash via microSD card. [url="http://wiki.xda-developers.com/index.php?pagename=KaiserSDFlash" URL]Read here.[/url]
You need winrar to extract file nbh from the shipped ROM.exe.
Hmm, i don't think i do have HardSPL actually installed,
When i saw the tricolour screen come up with different version information I stopped that batch file that was installing HARDSPL (impatiently) and started the HTC one (which failed at 15%). So now i (think) i have a phone with no firmware and the bootloader says:
KAIS130
SPL-1.56.0000
CPLD=8
I reckon if i can find a vodafone made rom the bootloader'll let me install it.
Any idea where i could find one?
What is ur orginal shipped ROM?
Your solution now is flash back the orginal ROM by using microSD card method I mentioned above, install HardSPL succesfully, then flash whatever ROM you prefer.
Hey Nghiem,
Thanks for the help, that link doesn't go anywhere though.
Also, wouldn't i need the original rom from somewhere in order to do that?
Thanks,
Dan
where did you buy the phone e.g vodafone, orange, etc...so I can tell you the original ROM? Because you phone CID is not unlock, hence you must flash the back the shippied one.
Get the WM 6.1 Vodaphone official here http://forum.xda-developers.com/showthread.php?t=365058
Hi,
I got the phone from Vodafone in the UK.
It had WM5 on it... erm, that's it.
I've just beem trying to load original voda roms back on to it but it's not happy - i don't know if they really are the originals though, one says 'reconstructed'.
Dan
Actually, that was the rom i tried and it came up with the Vendor ID error.
Dan.
Link on post #6 is the official not reconstructed. How about download directly from Vodafone website? It's strange when you have carrier ID block even with its ROM. Also, try reconstructed ROM listed here http://forum.xda-developers.com/showpost.php?p=1586817&postcount=2
Search for mtty, see if it can help you out.
MTTY saved the day!
Only 3 hours of my life lost!
Thanks,
Dan
Cheers. Don't forget to flash HardSPL and read the wiki before doing anything.
ok, im inbetween a newb and a full out destructive force to any type of moddable device and im having a little bit of trouble with my cingular 8125. ive had this phone for a few months and i am having the hardest time dealing with the rom on the phone now. ill give a quick breifing on it:
got it with original cingular rom, not sure what spl or ipl on it but the first thing i did was unlock it by myself, cid and sim unlocked, and then updated to a jaguar wm 6.1 rom which worked fine. decided i was going to unfortunately sell this phone so i decided to upgrade it one more time to see if i really wanted to sell it, i then bought the upgrade to go past my 2.21 ipl and spl. i got my unlocker and followed my instructions and got a brick. but not a full brick. its stuck in the bootloader screen. after reading countless threads, i learned that i should be able to just still update a rom to the phone with no problems which actually works, but as soon as a rom completes it goes right back to my bootloader screen so help me! please cuz now thats its a challenge again, i want the phone! plus all my info is on the phone still back up
Flash the official stock ROM first, then use Button's ROM to downgrade your IPL and SPL before unlocking CID.
post the present IPL/SPL it displays now.Which rom you are trying to flash now ?
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
dimedash12 said:
ok when i try to put the most current 8125 rom on my phone (2.25.blah) it tells me that its not the same phone which is weird but thats preventing me from putting the original rom on the phone. however if i try and put the buton rom on the phone now, it will go through completely and say it put it on the phone, but when it restart, its right back to the bootload screen...
and im running IPL 2.21.0001 and SPL 2.21 with a previous installation of a jaguar rom, dont know exactly which one, but i know it was a jaguar rom. but right before i tried to upgrade the updater, i went back to my default WM5 rom so i guess it was te basic 2.21 rom on the phone with WM5
Click to expand...
Click to collapse
WEIRD !
You got mixed Bootloaders of G3 And G4,IPL 2.21.0001 is G4 and SPL 2.21 is G3,as you posted,well,can't say which was original,only you can tell,but some how its mixed Bootloaders,in this situation no Rom will flash,its a 'Brick'.
If as Zabardast says its bricked then you have three options:
1. Get a new Wizard
2. Get a new Wizard Motherboard
3. Get a Wizard with broken LCD from eBay and replace its LCD with your current one and Enjoy!!! (Cheapest)
lol this is tough! but no worries, ill be back with some other pda at some point and time and then ill try and take this phone apart! but the weird thing about my wizard is that this only happened when i tried to update the phone with the CID unlock program that you have to pay for!
lol it was perfectly fine until i tried to do it! oh well, back to my crappy p168!
May be that CID Unlock program was not meant to be for a G3 and you were updating a G3 so it mixed you IPL/SPL and caused a kinda BRICK. So please be careful before doing flashing things because if you dont be carefull then your PPC may become a heavy paper weight, and a costy one too. LOL. TC
kitty4uhig said:
Farming for eq2 plat isn't easy, but you can buy eq2 plat, guides, accounts & items on sale. We have revolutionized the exchange of money to eq2 plat. Purchase eq2 plat& power up your character ot the next level. Our world class customer service will make sure you are more than satisfied with every purchase. Feel free to contact our 24 hour live support with any questions you may have. Shop now and play as a VIP!
Click to expand...
Click to collapse
Stop this nonsense immediately,otherwise it'll be reported and you'll be banned.Its spam !!!
try this: http://forum.xda-developers.com/showthread.php?t=276963
Cingular 8125 problems
Ok guys i am really pissed i have been looking for three days and cant find it, first off my IPL is at 1.01 and the SPL is at 2.25 and i cant fix it i wanted to install the original 2.25 again and start from scratch but can not find the damn thing so if anyone has it can u just upload it fo me and give me a link that i can get it at please i am sick and tired of waitnin i really like this phone and i dont want to risk bricking it thanks.
Ok, grimgod, aggression is reaaaallly ugly and no freakin one will help with that sh!t attitude (pardon the language, mods). The senior members do everything they can to help the noobs. Have you tried reading the flashing guide, wiki, or tutorial? I'd bet even money you haven't. Have you CID unlocked? Did you flash the button rom twice ( as the guide suggested to get ipl/spl both 2.xx)? Did you flash the official tmo rom (found im the flashing guide)? Have you done anything other than sit on your hands and wait for it to be handed to you? READ AND SEARCH!!!!!!!!!!!!!!!!
http://forum.xda-developers.com/showthread.php?t=310831 <HERE!!!!!!!!!! Should I flash your device, too?
Similar issue... need some Wizard Expertise
I picked up a coworkers old Cingular 8125 that he'd had in a drawer for about a year. Battery was right dead so the phone wouldn't boot. I charged the battery on an external charger for a few minutes, put it back into the phone, and plugged it in to the charger until the LED went green indicating a full charge.
When I power up I see the T-Mobile splash screen (light gray background, some square dots, and the "T-Mobile" logo). And there it stays indefinitely.
Tried a hard reset (Comm Mgr + Voice Cmd + Soft Reset), and it said "Press Send to restore factory default". Pressed the green dialer key (I assume that's send), and it says Format FAT partition, FAT partition complete, and then returns to the same T-Mobile splash screen and hangs there.
So then I tried putting it into Boot Loader manually (Power On + Camera). No problem, shows IPL 2.26 and SPL 2.26. Plug it into the computer USB port (running XP Pro), and then the USB connection shows on the phone. Attempted to flash the Wizard Love ROM to get this thing back to square-one. Error 260. Attempted to flash the T-Mobile stock ROM. Error 260.
Between each flash attempt, I'm pulling the battery out and starting fresh. I think I've followed all the steps I'm finding in multiple threads. But for some reason I'm not able to get this thing to communicate via USB. All RUU's give an Error 260. Am I missing something?
Forgot to mention I'm following the steps outlined in this thread from Dr P. To the letter!
Also did a little reading up on using the MTTY method in this thread by Drug_Store. Thought maybe the existing ROM might be intact, and I might be able get it to a 256MB MiniSD, then write the backup ROM from SD in boot loader. Well, for some reason I don't even see the USB connection option when I use the MTTY - can't ever get to a point where I can issue commands. Again, I think I'm following the instruction. But still no juice.
Nudge, nudge. I'd donate for a solution that works... otherwise I have to keep letting my 10 year old play The Quest on my phone.
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Be strong. I think it's only bricked when you can't power it on.
I have a poor net connection and not time atm. So a suggestion if you haven't already, search the forum for the word bricked. I'm sure this has happened before..
There are several tricks that people know so you might be ok. good luck.
Calihoe said:
Uhh......yea......I was trying to upgrade my Rom to Dutty's Diamond V1 Build 19588. I was using the instructions from Flash-Your-Tilt . I got to Step 4 CID-Unlock it installed 100% rebooted and then nothing. Now the phone will only play the intro with no sound, then go black. It shows in the lower right hand R 1.70.02iNex, G25.65.30, D1.62.00.00. The phone will allow me to do a hard reset but after it it goes through the intro with screen alignment and installs the extra apps, it reboots and then goes black. I did a ton of reading through the wiki's if someone could point me in the right direction or tell me if its toast, it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Flash an OEM Rom/Radio Combo. Also it wont hurt if you already CID unlocked to to go ahead and flash a new SPL to it. Should fix any and all issues as your phone is still actually booting and Not bricked
Installing windows the 6.1 ROM from HTC's site worked. Thank you very much for the great advice. If I wanted to now put Dutty's ROM on my phone can I go straight to that, or do I need to restart the whole ROM flashing process(installing Jump SPL, Hard SPL and CID) ?
If you have unlocked it, just put duttys onto the SD card and rename the .nbh to KAISIMG.nbh
Put the phone into bootloader and install Its the fastest most successful method. No worry about a data cable coming out mid flash ( happened once to me....not fun )
Shouldnt have to install hardspl again ( or use JumpSPL )
Just make sure that if you are installing a WM6.0 rom that you have a WM6.0 radio. If not, the flashing process for the radio is the same ( rename to KAISIMG.nbh )
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Calihoe said:
Is there a way to see if I the hard SPL install and CID unlock worked ? Can I just restart the whole process regardless. Sorry for the noob questions.
Click to expand...
Click to collapse
Go into bootloader. If your screen says hardspl somewhere near the top then you're good to go. Check which version because you can have radio problems if you use a WM6.0 spl with a WM6.1 rom. Most recent roms are WM6.1 so try HardSPL 3.29 or higher.
If you don't have hardspl, get it here for wm6.0 roms or here for wm6.1 roms.
many thanks, your advice with the links were invaluable. I read and read and read, but i guess i did not read enough. This site rocks.
Hi I have placed hard-spl version 1.3 this will not let me do a proper rom flash their for i have a device that can go into boot mode or be placed in a tri color screen I feel i need to find a way of changing the spl to either hard-spl 1.2 or des crash proof no i found out after the fact that 1.3 has issues for some people and also it is protected from being it's self removed Any Help welcomed as i would love my trinity back.
I should not drink while fixing phone I have spl issued solved was trying exploit and not doing the next step of running a ruu program to do the update at least oli 1.30 off now time to try a new rom and get phone back will be a spare as I bought a Touch HD just have to get rid of telstra branding
Where Can I get this program or is part of the unlocker if it is this did not seem to work I am unable to get a connection from a RUU I have to place device in tri colour screen which as far as i can tell mean that hard-spl can not be changed hmm wish i read about hard-spl 1.3 issue before i loaded it any help welcome
Does anyone have this? I'm going to be returning my phone soon to letstalk.com through RMA, and i just wanted to see if i could hopefully get rid of that "test only" screen that appears on the herg dump of the att rom. I already have the stock radio on, and i was thinking about re hardspl locking it, but i think thats the last thing i want to cover before i try returning it
Check out the thread on Herg's fully reconstructed ATT ROM. It includes the stock (without test) splash screen as well as the radio and other necessary components.
you have any idea where the thread is, got a link? the only thread i've seen on xda links to his thread on mobilitydigest. and that just has the rom by itself. and that rom is the one that has the ''test only'' splash screen
its here http://forum.xda-developers.com/showthread.php?t=577492
srsaleenstang said:
its here http://forum.xda-developers.com/showthread.php?t=577492
Click to expand...
Click to collapse
thanx so much man, now i can finally flash stock and ship this phone back