Lost connection with network - Tilt, TyTN II, MDA Vario III General

Hi,
I've got realy problem with my mobile phone - tytn 2. There is no particulary reason of that, becouse i've never whopped it and i heavn't change the software before it started to happend. I've checked on different sim card and every time i've got the same problem. About five minuts since i've switch on my ppc (Vodafone 1615) i've lost network connection. Since now I tried to change software and radio, put sth for better connection with pin. My question is what should I do. I think that hardware is problem, but maybe is software solution for that. Becouse my english is not very well, please ask if sth isn't understandable.

Motherboard/3G
This may or may not help, but I've read several people complaining about the TyTn II/Tilt phones losing data connection and usually the only thing that would fix them is to replace the main board inside. The only workaround I know if is to turn off 3g on your phone which runs only Edge data. This works great for me as I don't lose data or drop any calls. Search the forum for "Kaiser Comm Manager 3g" and update your comm manager if yours already doesn't have the "turn off 3g" function. Then check on your warranty on your phone and see if they will fix it for free under warranty. Good luck.

Related

Why wont my touch diamond come out of standby ?

OK
had the touch diamond about 5 days ago. (no network) stuck my orange sim in it from my e650
In that 5 days it has twice failed to come out of standby. Nothing will get it to come alive apart from taking out the battery. Bit of a problem because i use it for alarm clock in morning.
The only things ive done to it so far are
Installed PHM reg editor
Installed PHM soft reset
Installed cab file to get rid of sms threading/conversation
Installed cab file to enable delivery notifications for SMS
Carried out reg hack to not show sim contacts (although thats now reset due to the battery coming out (I think))
Anyone else had this problem and got a fix? I tried pressing the standby/off button, holding the standby/off button pulling out the stylus etc
Hope I havent got dud hardware
Cheers
JP
same problem here with my mda compact IV from T-Mobile, just have the phone for 2 day's now, and it's 8/10 times now it would not come out his standby mode.
first thing i did when i got my MDA, is flashed it to A.Z.T.O.R. V7 Black Diamond Touch Edition.
So I'm kicking this thread up, hoping for some kind of solution of idea!?!?
hello,
thats not normal. use orig. rom from provider and check it again.
if the same than back to seller.
use reset to start the device again and not the battary put out/in.
iam not expert so see this answer only as a proposing.
okokur
Previous related thread?
Still not very happy with my phone so I might send it back to be checked.
i found another thread http://forum.xda-developers.com/showthread.php?t=436000&highlight=standby+freeze
I've had this exact problem, but the reset button on the back does work when this happens. I'm in the US on T-Mobile in NYC using a European Diamond. I work in a building that has very weak T-Mobile coverage and I've found that I only get the problem when I am at work. On the weekends and at night, the problem never happens because I am usually in an area that has either no coverage or good coverage. I have not eliminated the problem, but I have discovered that setting the network type to "GSM" and the band to "UMTS(850+1900)GSM(850+1900)" reduces the incidence of the problem for me to once every few days. I'd love to hear a good solution to the problem as well.
Click to expand...
Click to collapse
I have the same problem only at my work where I get almost no signal.
before my diamond a had a HTC Elf with the same problem only at my work, this phone is switched for a diamond with the same problem now.
I updated radio now, see what happends
The radio is updated to V. v1.00.25.05
i have much better signal now, and no problems at all.
I had the Standby of Death SOD this is when the phone fails to come out of standby with a power button press. This issue only affects some people on some networks. I'm not sure if its a network problem or a software problem but as only a minority of people have it, I suspect its mainly a network problem there is a software solution.
The solution is to change the phone settings band option from auto 3G/2G to either 3G Only (WCDMA + UTMS 2100 in Europe) or 2G Only (GSM + AUTO) depending on your requirements.
Also read this thread http://forum.xda-developers.com/showthread.php?t=540943&highlight=standby&page=2where the resolution was to get a new SIM.
Obviously this only solves the problem when the crash is because of the sim and/or settings which impact the sim. To rule out a software cause its best to start with a hard reset.

HTC Diamond WiFi issue, help needed

Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked

Help for my father!

Hi guys, I am posting here just to solve one issue of my father's diamond.
I have one raphael, my father got a diamond, and it is different on provider informations.
My raphael automatically detects the provider's configuration, installing it on connections, I tryied it with my father's diamond, and his diamond doesnt take the provider's information, I dont know why. So, I have just configured it by my hand manually, using the necessary informations, all ok, it worked fine, he can work on internet, but the problem is that all times he power on his phone, come the warning that is trying to take provider's information, and automatically goes to the connections on settings tab, its a warning, I think that the cell phone doesnt detect that it is manually typed, and try again with a global icon on hardware's tasks.
Once I have already configured it, I would like to KILL this warning, he is a big disapointed with it, that appears sometimes.
Thanks for now
Hi....first of all...I am not an expert! I think the solution might be to go to 1) Settings......2)Connections and click on the connection setup symbol, (if you have it) this should set it up for you.....hope this helps
It the PDA goes automatically, but always repeat when i power on the phone
the last answer:flash the other rom
I will find it, but I dont know if I is easy to locate the portuguese rom as it is installed on his fone

kaiser sucks with new sim

hi all i have a attt tilt with my own custom rom based in the original htc kaiser spanish rom and the radio 1.71.09 o what ever how it is... i never used this device as phone until one month ago (i change my phone and operator), well when i was using the device as pocket pc never show a problem, but when i install the sim from my new operator Claro Chile, the problem starts, the device some times stuck, its sticky, almost all time it related to the phone part, i mean phone contacts, gprs-edge-3g-h, phone dialer, write text messages (its painfull keyboard eat 50% of the letters)... i can say that happen 95% with the phone things...
any ideas? maybe my brand new sim its not working fine? i set the network to manual, picked ClaroCHL (here are 3 ones, Claro, Movistar, Entel) and even disable otherones that appear in the chip like Claro Brazil, Claro Argentina (i suppose that are for roaming)....
Regards!
I'm not sure what's wrong because I don't know how bad the delays are. On my phone, I had delays too. It seems doubtful that the delays you experience are related to a SIM card: they rather seem to be caused by the standard phone software's being slow in itself.
- Delays in simply calling and finding contacts in your lists might be solved by installing a different program to handle this. Resco Contact Manager, for example, is very fast on my phone. The standard HTC phone program sucks, the one that came with PDACorner's ROM was quite slow as well on my phone.
- The keyboard's eating letters depends on the repeat rate and first repeat values in your phone's registry. They can be altered by going to settings, buttons, up-down buttons (I think that's where it was; I remember it was a funny location). There are many threads on this; find them through Google. They have advice on proper values.
- Sometimes my phone takes a very long time (and I mean 30sec+) to open text messages or e-mail; I haven't been able to fix this. It is weird, as it opens them instantly at other times.
hi there!, my kaiser dosnt have delays, got coma states xDDDD, its dosnt respond the screen and the imput for like 2 minutes, its seems to be related to the Claro signal, i am using GSM to disable 3G/H for the battery life and maybe sometimes the radio cant find a good setup for that and start sucking... i gonna do some tweaks on my rom (or remove some of my tweaks), and start using the phone with 3G, about the keyboard i got working perfect, just when i wrote sms its faild due sms its a program that use the cell phone part, regards!
Ah okay, those freezes sound really weird, I have never experienced anything like that on my phone, but I am far from an expert. I have used different ROMs, and my phone sometimes can't find signals, keeps searching for a long time et cetera - but it never stops responding. Good luck with that... by the way, it seems a waste of your phone's capabilities to not use 3G! I'd rather buy a 1600 mAh than not use 3G. Or even carry a spare battery with me.

Fix the phone radio of WM

Hi all, i got a Kaiser, ATT model, 2 month ago i has been using the device as pocket pc only and was working perfect, now i use as phone with the carrier "CLARO" from Chile... well this its drive me to crazy... when the phone function its on, the device its very sticky, i use it fro 3 or 5 min and then freeze for 30 seconds, some times i just wake up it from sleep and freeze, some times start freezing 15 second every 2 seconds... when i say freeze i mean its dosnt respond from any imput (Screen, Hardkeys, Keyboard, Power)... i was testing kaiser radios like 1.65.xx, 1.70.xx, 1.71.xx and niki, etc. without luck... i hide sim contacts too, i set manual search for networks, i try with automatic too and disable the other country networks that i found on the sim, i switch between GSM and 3g, i even change my custom ROM...
Well i think i am not hte only one in the world with this problem, long time ago i see a guy with a ipaq 6940, WM 5.0, i see the device working and freeze a lot too with the same way, even in XDA i read post responses talking about this, i think the problem its related to the reception, some times when i am on home work very nice, but when i go to the center of my city and enter to mall, the device start freeze a lot, on my girlfriend house too (its a solid structure, my its make in wood lol)...
so, i am very tired of this, its getty a pain to use the device, any one has some similar problem? i think the windows reg can be tweaked for disable some parameters of phone and cause problem, maybe a way to tell the phone "when the signal its low, just lost it", in other post (i dont remeber the link, so please if anyone know it plz post it here) i read that there a reg key to set the priority or some like that the carrier give to the phone (in numbers)... well any info its welcome!!!!!
Regards and thanks!
no body has same or similar issue????

Categories

Resources