How to downgrade to wm6.1? - XPERIA X1 ROM Development

hi guys, i've been using wm6.5 for some times, but i think there's some problem with my x1, and i need to install back to it's original wm6.1 before i take it to the service centre.
could anyone help me on how to downgrade my phone to wm6.1? i appreciate much for sharing some information

Hi,
I have not tested it myself, but my first suggest would be to use the offical upgrade tool from sony Erricson.
Would be greate if you could tell us if it worked.

cannot. it says that my phone already has the latest version.
anyone please help?

kavacz said:
cannot. it says that my phone already has the latest version.
anyone please help?
Click to expand...
Click to collapse
download this:http://rapidshare.com/files/238466530/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe then 2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction

mmmm ... i think he also need to restore original SPL ?

deepthroat said:
mmmm ... i think he also need to restore original SPL ?
Click to expand...
Click to collapse
not narrow this makes everything!
just flashing on the manner written down and ready. tested.

thanks guys. downloading now

oliolioli said:
not narrow this makes everything!
just flashing on the manner written down and ready. tested.
Click to expand...
Click to collapse
yeah, but when he wants to bring it to the service center he schould restore original spl. so flash an original rom then flash stock spl and then flash again an original rom. that should do the trick.

kavacz said:
thanks guys. downloading now
Click to expand...
Click to collapse
your feedback would be highly appreciated

i already flash it with stock .72, should i flash it with original rom again?
and where can i download it?

update success! using the file from oliolioli. thank u so much guys!

kavacz said:
update success! using the file from oliolioli. thank u so much guys!
Click to expand...
Click to collapse
I am glad that he succeeded and how I may have helped!I put up the original software from a card next first it stock spl and like this perfectly factory state!

hey guys.. i try to recover my x1 from 6.5 back to 6.1 but i need an german rom and the original hard spl... any idea where i can get it from?
greetz =)

Related

can not sync after new rom

Hello, I installed a new rom, a greek rom, and after that, i can not connect with the pc. I used to synch it until i installed this rom. What can i do now please?
thanks
Try in ROM section...
It's difficult to tell what the issue is here. The best thing to do is read the threads from where you got the ROM from, someone may well have had the same issue and know how to resolve it. If not, post in that thread and ask the ROM cooker for help. If you've got an issue with it, perhaps other people are suffering the same fate!
grahamkdt said:
It's difficult to tell what the issue is here. The best thing to do is read the threads from where you got the ROM from, someone may well have had the same issue and know how to resolve it. If not, post in that thread and ask the ROM cooker for help. If you've got an issue with it, perhaps other people are suffering the same fate!
Click to expand...
Click to collapse
Thank you for your answer!
I went there and posted a thread but got no answer i am afraid. And nobody seems to mention that problem. If no one answers, then what are my next steps? Can i use a bluetooth to make the connection? Is it the same with the activesync? I believe it is the roms fault... So i might install my previous one, which was ok..
Hi did you do a hard reset after you flashed the rom?
cobbs said:
Hi did you do a hard reset after you flashed the rom?
Click to expand...
Click to collapse
In the beginning no, but it was an option and i did one yesterday, but nothintg happened I am afraid...
have a look here it may help http://forum.xda-developers.com/showpost.php?p=3315240&postcount=5325
cobbs said:
have a look here it may help http://forum.xda-developers.com/showpost.php?p=3315240&postcount=5325
Click to expand...
Click to collapse
I am so sorry to say that nothing happened again!!!!1
kerko said:
I am so sorry to say that nothing happened again!!!!1
Click to expand...
Click to collapse
Ι wonder if i can install a new rom from within the device, because i can transmit it there. The pc recognises it as a storage card. Can it be done?
kerko said:
Ι wonder if i can install a new rom from within the device, because i can transmit it there. The pc recognises it as a storage card. Can it be done?
Click to expand...
Click to collapse
If you copy the ROMs .NBH file to the storage card and rename it DAIMIMG.NBH, soft reset your device and then hold down the Volume Down key together with the back key <-- you should be presented with the option to load the file from there.
Hope this helps
Please post back the outcome.
R3PUBL1K said:
If you copy the ROMs .NBH file to the storage card and rename it DAIMIMG.NBH, soft reset your device and then hold down the Volume Down key together with the back key <-- you should be presented with the option to load the file from there.
Hope this helps
Please post back the outcome.
Click to expand...
Click to collapse
Good morning!
I so much thank you for your help!!
I managed to install a new rom and overcome the synch problem. Now everything has come back to normal. I hope my mind too
Thanks again
Can you flash radio like this as well?
kerko said:
Good morning!
I so much thank you for your help!!
I managed to install a new rom and overcome the synch problem. Now everything has come back to normal. I hope my mind too
Thanks again
Click to expand...
Click to collapse
I'm glad to of helped you.
sakul84 said:
Can you flash radio like this as well?
Click to expand...
Click to collapse
Yes, as long as you change the name
R3PUBL1K said:
I'm glad to of helped you.
Yes, as long as you change the name
Click to expand...
Click to collapse
Just to make clear:
If I rename the .nbh radio file to DIAMIMG.NBH I will flash a new radio exactly as I did with the ROM?
sakul84 said:
Just to make clear:
If I rename the .nbh radio file to DIAMIMG.NBH I will flash a new radio exactly as I did with the ROM?
Click to expand...
Click to collapse
Yes! thats it exactly

restoring a bricked phone

any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Was restoring the stockspl succesfull?
What info do you get in bootloader?
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
pls dont wast threads
hi
a humble request Kindly dont was threads i have created a specific thread for Q& A on Jade why not post it their pls see below link
i see u have wasted 3 thread which could have been used for a much more usefull purpose this is just my humble request to you i hope u will do the neeful thanks
Note : kindly read the first page u would understand why not to waste threads
http://forum.xda-developers.com/showthread.php?t=534581
orange3g said:
any ideas.......read all the threads here, nothing works.
i had the 1.7 orange version. hardspl'd it and put a 6.5 dev on there, but radio quality was poor. so followed the procedure to put the stockspl back on there. But nothing else works, I can't restore the original rom (grabbed from here) as the screen stays at 0%. tried to hardspl it again but that doesn't work either.
what do i do now .........?
thanks.
Click to expand...
Click to collapse
"a humble request Kindly dont was threads" read your thread on that, space taken up whether new thread or reply is the same.
orange3g said:
The info is:
JADE110 64M
SPL-1.40.0000
MicroP-Jade (LED) v5
It still has windows 6.5 rom on there tho, which is seriously messed up now.
Click to expand...
Click to collapse
Am afraid you have a problem, you should have down it the other way around...first stock ROM then stock SPL.....but this is merely a fact then helping you out, i have absolutely no clue how to go from here...sorry!
Maybe someone who can offer some practical assistance will be along soon ......
@Nirak: yes, I misread it. What a silly thing to do. Do you think HTC can help. The phone is in warranty.
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Have you tried to flash your rom through the boot loader mode
try this
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
orange3g said:
May be they will see this thread. .... otherwise how can I contact them?
Thanks for the ideas.
Click to expand...
Click to collapse
Send them a PM, Olipro is not often here, but Cmonex is
haree said:
hi
try this
1. do HSPL on ur phone again using the tools given in the thread
2.after successful HSPL Flash the Stoc rom the right one for ur phone
3.then flash the Stock SPL again the right spl for ur phone
this is just my suggestion i hope ur successful and it helps to solve ur problem
goodluck
Click to expand...
Click to collapse
Doesn't work because it needs a functioning windows mobile, which I don't have. Mine gets stuck.
thomas01_58 said:
Have you tried to flash your rom through the boot loader mode
Click to expand...
Click to collapse
Yes, nothing happens. The screen is stuck at 0%. I tried using a htc original rom, it got to 1% and said something like not suitable for this device.
I sure this sounds rather silly ,and I am sure you have tried it,have you tried removing the battery and then putting it back again.
Not sure if you tried this already:
Run HardSPL when your phone is in tricolor mode (bootloader?).
Then reflash a stock ROM, also in tricolor mode.
Finally, flash stock SPL.
Hope this helps.
@izzysc: I have tried it (will try again though) in running HardSPL when phone is in tricolor mode. It did not work.
Nirak said:
Well, since you've got stock SPL on it you could give it a try. When they start asking questions you could say you tried to install a WM 6.5 ROM by accident.., dunno if they buy it...
But on the other hand, being honest is maybe better, they might just help you out or else you have to pay, but since you have a rather expensive paperweight right now, this might be an option too.
BTW.. did you try to contact one of the releasers of the HardSPL? (Cmonex or Olipro), you never know where they can come up with....
Click to expand...
Click to collapse
I have PMd Cmonex. Thanks.
replied to PM
cmonex said:
replied to PM
Click to expand...
Click to collapse
Tx! had an idea you could help out...

SE Updater failed to install new rom, what is the best thing to do now?

Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
original roms will still work with original spl... but nevermind =P
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)
meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?
Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?
laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks
DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

How to flash HTC HD Rom ?

Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
stussy said:
Hi all
where to find ROMUpdateUtility.exe ???
I download Dutty's rom, but only have one nbn file.
I searched in forum said need ROMUpdateUtility.exe but i can't find it ......
Pls help !!
Thanks
Stussy
Click to expand...
Click to collapse
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
philrom said:
Hi Stussy,
You can start from here: http://forum.xda-developers.com/showthread.php?t=505377.
Choose which method you want to follow, HSPL or USPL. Read the instructions very careful, otherwise you may brick your phone.
Good luck.
Click to expand...
Click to collapse
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
stussy said:
Thanks bro, but i'm still confuse
Need to change the dutty's rom name to BLACIMG.nbh ?
Is it flash the SPL 1st ? i'm only have 1 file of rom ..... how to flash the rom ...
hardspl got many version ... do you know which one suitable for this rom ?
Because yesterday i tried flash the spl ..... my HD become 3 colour .. oh my god
Lucky i found the version 1.14, after that ok already.
Click to expand...
Click to collapse
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
philrom said:
First, you have to check the SPL version you have. Turn off your HD, and press both down vol + power button to check your SPL version.
Then after that you can decide which way you want to use.
HSPL means flash the SPL once and you can flash ROM at anytime without worry about SPL.
USPL means you have to flash your SPL each time you want to flash a ROM to your HD.
I think your thread will be closed by mod, as this issue can be solved using the thread I gave you above. If you have any issue, you can post in that thread or send me pm.
Good luck, bro.
Click to expand...
Click to collapse
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
stussy said:
Damn .... become 3 colour again ... now the problem is can't find the SPL 114 to restare, yesterday forgot save it ...
Click to expand...
Click to collapse
??
What's the situation now? What SPL version do you have now?
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i check now
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
Now my SPL is SPL-1.56 olinex
But the screen colour become 3 colour only ... just look alike our computer safe mode
philrom said:
??
What's the situation now? What SPL version do you have now?
Click to expand...
Click to collapse
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Just do the guide from Digital Outcast Step-by-Step and you can't go wrong.
If you got a problem with a certain step, then explain it detailed.
We can't help if we don't know the exact problem.
stussy said:
i want to flash this rom "Duttys HD HG R3 5.2.21893.nbh" but don't know how to do ...
Can you help me ?
Click to expand...
Click to collapse
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
philrom said:
What is your current SPL? What kind of situation are you facing now?
Make it detailed so we can help you.
Click to expand...
Click to collapse
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
stussy said:
SPL-1.56 OliNex
radio : 1.09.25.14
Now my rom still original, the colour become ugly, look alike computer entry safe mode colour.
How to change the rom ? Y the colour become like that ?
Thanks a lot
Click to expand...
Click to collapse
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
philrom said:
I see. Don't worry for the 3 colours. It's because your ROM is not supported by the current SPL you have now. From what I see, you are using HSPL.
It's easy to upgrade ROM using HSPL. The safest way is through the SD card.
You can try this:
1. Make sure your SD card format is FAT32, and make sure you have minimum 30% power left in your battery.
2. Rename the *.nbh file to be BLACIMG.nbh, and copy it to your sd card root location. Remember to copy it to your sd card root.
3. Shut down your pda, and go to your bootloader and follow the instruction there. Remember to hardreset after flashing. Don't plug the usb cable in while flashing.
Good luck.
Click to expand...
Click to collapse
I will try tonite bro, anything will let you know
Thanks a lot

Categories

Resources