Hello, I installed a new rom, a greek rom, and after that, i can not connect with the pc. I used to synch it until i installed this rom. What can i do now please?
thanks
Try in ROM section...
It's difficult to tell what the issue is here. The best thing to do is read the threads from where you got the ROM from, someone may well have had the same issue and know how to resolve it. If not, post in that thread and ask the ROM cooker for help. If you've got an issue with it, perhaps other people are suffering the same fate!
grahamkdt said:
It's difficult to tell what the issue is here. The best thing to do is read the threads from where you got the ROM from, someone may well have had the same issue and know how to resolve it. If not, post in that thread and ask the ROM cooker for help. If you've got an issue with it, perhaps other people are suffering the same fate!
Click to expand...
Click to collapse
Thank you for your answer!
I went there and posted a thread but got no answer i am afraid. And nobody seems to mention that problem. If no one answers, then what are my next steps? Can i use a bluetooth to make the connection? Is it the same with the activesync? I believe it is the roms fault... So i might install my previous one, which was ok..
Hi did you do a hard reset after you flashed the rom?
cobbs said:
Hi did you do a hard reset after you flashed the rom?
Click to expand...
Click to collapse
In the beginning no, but it was an option and i did one yesterday, but nothintg happened I am afraid...
have a look here it may help http://forum.xda-developers.com/showpost.php?p=3315240&postcount=5325
cobbs said:
have a look here it may help http://forum.xda-developers.com/showpost.php?p=3315240&postcount=5325
Click to expand...
Click to collapse
I am so sorry to say that nothing happened again!!!!1
kerko said:
I am so sorry to say that nothing happened again!!!!1
Click to expand...
Click to collapse
Ι wonder if i can install a new rom from within the device, because i can transmit it there. The pc recognises it as a storage card. Can it be done?
kerko said:
Ι wonder if i can install a new rom from within the device, because i can transmit it there. The pc recognises it as a storage card. Can it be done?
Click to expand...
Click to collapse
If you copy the ROMs .NBH file to the storage card and rename it DAIMIMG.NBH, soft reset your device and then hold down the Volume Down key together with the back key <-- you should be presented with the option to load the file from there.
Hope this helps
Please post back the outcome.
R3PUBL1K said:
If you copy the ROMs .NBH file to the storage card and rename it DAIMIMG.NBH, soft reset your device and then hold down the Volume Down key together with the back key <-- you should be presented with the option to load the file from there.
Hope this helps
Please post back the outcome.
Click to expand...
Click to collapse
Good morning!
I so much thank you for your help!!
I managed to install a new rom and overcome the synch problem. Now everything has come back to normal. I hope my mind too
Thanks again
Can you flash radio like this as well?
kerko said:
Good morning!
I so much thank you for your help!!
I managed to install a new rom and overcome the synch problem. Now everything has come back to normal. I hope my mind too
Thanks again
Click to expand...
Click to collapse
I'm glad to of helped you.
sakul84 said:
Can you flash radio like this as well?
Click to expand...
Click to collapse
Yes, as long as you change the name
R3PUBL1K said:
I'm glad to of helped you.
Yes, as long as you change the name
Click to expand...
Click to collapse
Just to make clear:
If I rename the .nbh radio file to DIAMIMG.NBH I will flash a new radio exactly as I did with the ROM?
sakul84 said:
Just to make clear:
If I rename the .nbh radio file to DIAMIMG.NBH I will flash a new radio exactly as I did with the ROM?
Click to expand...
Click to collapse
Yes! thats it exactly
Related
ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
-----------------------
Go below the "Submit Reply" button until you see manage attachments. Click on browse (Make sure the file in a zip file.) and choose the file. Click on Upload, when it's done, hit close this window. Thanks it. Hopefully that's what you were asking.
ivanmmj said:
Go below the "Submit Reply" button until you see manage attachments. Click on browse (Make sure the file in a zip file.) and choose the file. Click on Upload, when it's done, hit close this window. Thanks it. Hopefully that's what you were asking.
Click to expand...
Click to collapse
thanks,but.how to resize the image in the post
I Don't Know How To Resize A Picture Uploaded.
A great work!Course , I have studied and have begun to attempt to be put into use very well...
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
430 read/1 reply
Well I tried this and it definitely works. I didn't get any increase in the storage size but the Touch IT nbh was similar to the original nbh so that's probably why. Maybe it's a placebo but I feel the phone is now much more responsive. Great writeup!
xander803 said:
Well I tried this and it definitely works. I didn't get any increase in the storage size but the Touch IT nbh was similar to the original nbh so that's probably why. Maybe it's a placebo but I feel the phone is now much more responsive. Great writeup!
Click to expand...
Click to collapse
what had written in the post now.did not tell you how to increase,it is still writing.I can have 54M stroage total.
does it work with dopod c800 ipl spl 1.09?
i can't understand what i must do after this one
OK,now the jspl is working,you can flash anything your want.RUU ROMUpdateUtility.exe ,ok next--->next---- you will see "To Version:6.666.66.6" yeah confirm it and flash it. after finished,a new first splash will appear
Click to expand...
Click to collapse
=|
so are you guys can not find any value of this Thread? or what I write makes you confused?
canonyang_China said:
so are you guys can not find any value of this Thread? or what I write makes you confused?
Click to expand...
Click to collapse
Hey, don't be stupid, this is a very good and detailed howto. I think most people didn't try it, because hardspl wasn't released and were afraid of bricking their device... I just installed hardspl and i'm now trying to flash a bit around
So thanks for this good thread
Best Regards,
FL
Screenshots please!
canonyang_China said:
so are you guys can not find any value of this Thread? or what I write makes you confused?
Click to expand...
Click to collapse
Well, I tried this four five times today with as much as I can understand. Still my devide bricked everytime . Can you please please attach some screenshots to your article!? Actually I am confused about the Rom building part. When you say that using the htcrt.exe tool, the OTHER files except for OS, EXTROM and SPLASH must NOT be modified, do you mean I need to specify the other values (SPL, IPL etc) from the original RUU ROM files? Or do I need to keep them "None" in the tool? All these questions would be easily answered if you can put up some screenshots...
Many thanks!
ie5x said:
Well, I tried this four five times today with as much as I can understand. Still my devide bricked everytime . Can you please please attach some screenshots to your article!? Actually I am confused about the Rom building part. When you say that using the htcrt.exe tool, the OTHER files except for OS, EXTROM and SPLASH must NOT be modified, do you mean I need to specify the other values (SPL, IPL etc) from the original RUU ROM files? Or do I need to keep them "None" in the tool? All these questions would be easily answered if you can put up some screenshots...
Many thanks!
Click to expand...
Click to collapse
to keep them "None" in the tool.
I am sorry I don't know HOW to resize a picture uploaded.maybe I will try later
What's wrong with my phone, I get different problems once in awhile. This time my phone doesn't ring when there is a call coming in. All the audio is set on high. I've been missing 20-30 calls these past 2 days. My email notification works fine. I've tried soft reseting to see if that helped, but it didn't.
I haven't changed the ROM or anything, this just suddenly happened.
I just tried it on vibrate and it didn't vibrate too.
DVS_WiNdz said:
I just tried it on vibrate and it didn't vibrate too.
Click to expand...
Click to collapse
Try reflashing your radio.
I've never flashed a radio before. Is there a possibility I can brick my phone by flashing the radio? and will I lose any information? (like when you flash a ROM, everything goes back to original settings)
post deleted
DVS_WiNdz said:
I've never flashed a radio before. Is there a possibility I can brick my phone by flashing the radio? and will I lose any information? (like when you flash a ROM, everything goes back to original settings)
Click to expand...
Click to collapse
Please tell me you are joking?
P1Tater said:
Please tell me you are joking?
Click to expand...
Click to collapse
lol, he's a Senior Member with 160 odd posts!! what have you been posting about?????
Check the WIKI before you go any furthur and no, flahsing a radio won't harm or reset anything as long as it is done right.
Can anyone direct me to a tutorial for flashing a radio? I can't find it with search.
DVS_WiNdz said:
Can anyone direct me to a tutorial for flashing a radio? I can't find it with search.
Click to expand...
Click to collapse
look in the WIKI I directed you to in my last post.
here http://forum.xda-developers.com/showthread.php?t=356895
now ur on your own, and not far to go , k.
ahh..
DVS_WiNdz said:
I've never flashed a radio before. Is there a possibility I can brick my phone by flashing the radio? and will I lose any information? (like when you flash a ROM, everything goes back to original settings)
Click to expand...
Click to collapse
It is not that hard to brick a phone... I had this problem with my OEM rom. I was trying to free up space and I deleted out all of my ringtones from the directory. now you know why they call it dope...
hi guys, i've been using wm6.5 for some times, but i think there's some problem with my x1, and i need to install back to it's original wm6.1 before i take it to the service centre.
could anyone help me on how to downgrade my phone to wm6.1? i appreciate much for sharing some information
Hi,
I have not tested it myself, but my first suggest would be to use the offical upgrade tool from sony Erricson.
Would be greate if you could tell us if it worked.
cannot. it says that my phone already has the latest version.
anyone please help?
kavacz said:
cannot. it says that my phone already has the latest version.
anyone please help?
Click to expand...
Click to collapse
download this:http://rapidshare.com/files/238466530/APP_SW_X1i_GENERIC_UK_CDF1215-1832_KOV_R3AA010.exe then 2. rename the image file (normally "ruu_signed.nbh") to Kovsimg.nbh, copy that to the micro-sd, and put that it yr X1
3. Make sure X1 is disconnect to your PC to avoid goes to serial mode (AC power source is OK)
4. Bring x1 to boot-loader mode by turning off the x1 completely. Hold the "volume down" button on the right, and hold the power on button until you see the tri-color screen.
5. Then follow the on-screen instruction
mmmm ... i think he also need to restore original SPL ?
deepthroat said:
mmmm ... i think he also need to restore original SPL ?
Click to expand...
Click to collapse
not narrow this makes everything!
just flashing on the manner written down and ready. tested.
thanks guys. downloading now
oliolioli said:
not narrow this makes everything!
just flashing on the manner written down and ready. tested.
Click to expand...
Click to collapse
yeah, but when he wants to bring it to the service center he schould restore original spl. so flash an original rom then flash stock spl and then flash again an original rom. that should do the trick.
kavacz said:
thanks guys. downloading now
Click to expand...
Click to collapse
your feedback would be highly appreciated
i already flash it with stock .72, should i flash it with original rom again?
and where can i download it?
update success! using the file from oliolioli. thank u so much guys!
kavacz said:
update success! using the file from oliolioli. thank u so much guys!
Click to expand...
Click to collapse
I am glad that he succeeded and how I may have helped!I put up the original software from a card next first it stock spl and like this perfectly factory state!
hey guys.. i try to recover my x1 from 6.5 back to 6.1 but i need an german rom and the original hard spl... any idea where i can get it from?
greetz =)
I just performed this task 29 and rom upgrade for a friend and it worked well. I tried it on my phone but its the wrong model id obviously.
I was hoping somebody could make it so that it works on our phones as its a lot easier than performing the MTTY steps
It was in the rom section in the TP2 forum, so i put it in this section. Mods remove it if necessary but i felt this would be the right place for devs to modify it.
http://forum.xda-developers.com/showthread.php?t=649191
try the RUU from attachment and let me know if it worked.
I tried it, and it works.
Not done this before, could you give a brief "How to" please?
Shambolicuk said:
Not done this before, could you give a brief "How to" please?
Click to expand...
Click to collapse
Download the attachment, place your ROM's .nbh with it and that's it. Use it as normal.
MisterGT said:
Download the attachment, place your ROM's .nbh with it and that's it. Use it as normal.
Click to expand...
Click to collapse
I did what u say, put the signed .nbh in the folder and ran the rom update utility.exe, it installed phone rebooted and now cant get past the touch diamond splash screen phone wont boot any ideas?
What is the rapitool.exe ?
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Its ok i did some reading and im back up and running Many thanks guys.
is this a good app? wondering if i should give it a try...
eltoro said:
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Click to expand...
Click to collapse
I thought it might be, but searching didnt bring it up for me at least. So we should make it a sticky as it is in the TP2 forum.
!Aman! said:
try the RUU from attachment and let me know if it worked.
Click to expand...
Click to collapse
works thanks
eltoro said:
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Click to expand...
Click to collapse
oops, never noticed it
xboxhaxorz said:
I thought it might be, but searching didnt bring it up for me at least. So we should make it a sticky as it is in the TP2 forum.
Click to expand...
Click to collapse
no need to make a sticky, we can add it to Rollup section. i was hoping that as OP you take the responsibility of updating first post with proper info, instructions, credits blah blah, so that it is as useful a thread as in TP2 section.
well i was making a rom and so i completed it. So i flashed it to my hima and it didn't work so, i flashed one of my working ones to it and it stays stuck on the first boot screen before the backlight comes on.
Anyone know whats happening here?
Thanks
flyboyovyick said:
well i was making a rom and so i completed it. So i flashed it to my hima and it didn't work so, i flashed one of my working ones to it and it stays stuck on the first boot screen before the backlight comes on.
Anyone know whats happening here?
Thanks
Click to expand...
Click to collapse
Should I really delete it?
You failed, what did you do?
hay i also got such a problom when i can't find the solution for always connected with active sync guide.
so just read it and follow the steps and flashe any good ROM and then hard reset it by below steps
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
& leave it you got your working screen again if device is not broken
best regards
KAASHP said:
hay i also got such a problom when i can't find the solution for always connected with active sync guide.
so just read it and follow the steps and flashe any good ROM and then hard reset it by below steps
1. Hold Camera and Record button and press reset. Hold it a while, until you'll see three options at the top. Choose:
* Enable KITL: No
* Clean Registry Hive: Yes
* Format Storage: Yes
& leave it you got your working screen again if device is not broken
best regards
Click to expand...
Click to collapse
No boot - rom failure.
Try using new tools instead
i fixed it. i just flashed one of your roms to it. lol
flyboyovyick said:
i fixed it. i just flashed one of your roms to it. lol
Click to expand...
Click to collapse
Well, in my opinion: Do not delete this thread.
It's a good beginning to discuss common problems on upgrading, or installing apps after that! What do you think of that? Telling others about problems and their solutions or workaround.
----------------
Now playing: Herbert Grönemeier - Musik nur wenn sie laut ist
via FoxyTunes
muckelmaus said:
Well, in my opinion: Do not delete this thread.
It's a good beginning to discuss common problems on upgrading, or installing apps after that! What do you think of that? Telling others about problems and their solutions or workaround.
----------------
Now playing: Herbert Grönemeier - Musik nur wenn sie laut ist
via FoxyTunes
Click to expand...
Click to collapse
good idea!
So luby have you been working on the 2minutes to flash a rom thing?
Or no progress?
flyboyovyick said:
So luby have you been working on the 2minutes to flash a rom thing?
Or no progress?
Click to expand...
Click to collapse
I've been working but now it is holiday, I have no special time to cook and create tools, I barely find time to write on forums. But last one is a must.
None of the kitchen for Himalaya can not gather a working firmware --- after flashing and hard reset - white screen.With Microsoft Device Emulator v3.0 everything works fine.Help us to reach a working Russian ROM.All files i give:
http://gettyfile.com.ua/570432/
aeroflyluby said:
No boot - rom failure.
Try using new tools instead
Click to expand...
Click to collapse
yeah you are right but by using good ROM you can flash it again and get working device Isn't it ??
KAASHP said:
yeah you are right but by using good ROM you can flash it again and get working device Isn't it ??
Click to expand...
Click to collapse
Yes, but if you cook it doesn't make any sense.
right i have cooked another rom, today that has the programs in DEVICE folder.
And i will try it tomorrow
flyboyovyick said:
right i have cooked another rom, today that has the programs in DEVICE folder.
And i will try it tomorrow
Click to expand...
Click to collapse
After about a month of mind collaption, of nirvana entries, of psychodelic traffic over my neurons (I believe them are transistors), I'm flashing new my rom.
God help the boot.
aeroflyluby said:
After about a month of mind collaption, of nirvana entries, of psychodelic traffic over my neurons (I believe them are transistors), I'm flashing new my rom.
God help the boot.
Click to expand...
Click to collapse
Still cannot get the rom to work! maybe its too big?
flyboyovyick said:
Still cannot get the rom to work! maybe its too big?
Click to expand...
Click to collapse
How many free sectors do you have?
aeroflyluby said:
How many free sectors do you have?
Click to expand...
Click to collapse
How do i find that out?
flyboyovyick said:
How do i find that out?
Click to expand...
Click to collapse
when you'r at the last step, you'll get a notice about free/used sectors..the rom MUST HAVE 0001 Bytes to work, if its not then ROM is overloaded..also the ROM stucking at bootscreen can be a wrong XIP port or initflashfiles.dat error
o btw guys...
/me takes out his dusty but still working good hima and charges it
/me starts up his kitchen
/me cooks ROM
/me starts testing and uploading soon
im sorry i was away..but i havent had much time for cooking...univerity exams and wokring to support myself =/
hopefully i'm back for good now..
Well today i come a cross a c skekhar folder with a rom in it and a ExtROM folder:
then i read this in a .txt in that folder and it says:
Code:
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
C_shekhar
So iam going to do a bit of messing about and try and get this to work and stuff.
Just thought i would let you know!!
flyboyovyick said:
Well today i come a cross a c skekhar folder with a rom in it and a ExtROM folder:
then i read this in a .txt in that folder and it says:
Code:
1. You must be seeing a folder \ExtROM here which has few cabs and tsk files. Place this folder on \Storage Card of your device.
2. You can add the files which you wish to autoinstall after hard reset to this folder. But, dont forget to modify the \Storage Card\ExtROM\Config.txt accordingly.
3. Mark all cab files as read only.
You now have the Extended ROM back on your device but on the storage card this time.... Enjoy.
C_shekhar
So iam going to do a bit of messing about and try and get this to work and stuff.
Just thought i would let you know!!
Click to expand...
Click to collapse
It does not make any sense, because I didn't manage to unlock extrom in 6.5 to perform normal reading (i will try tomorrow). I also cook 6.1 too.