Task 29 aka MTTY for TD2? - Touch Diamond2, Pure Q&A, Help & Troubleshooting

I just performed this task 29 and rom upgrade for a friend and it worked well. I tried it on my phone but its the wrong model id obviously.
I was hoping somebody could make it so that it works on our phones as its a lot easier than performing the MTTY steps
It was in the rom section in the TP2 forum, so i put it in this section. Mods remove it if necessary but i felt this would be the right place for devs to modify it.
http://forum.xda-developers.com/showthread.php?t=649191

try the RUU from attachment and let me know if it worked.

I tried it, and it works.

Not done this before, could you give a brief "How to" please?

Shambolicuk said:
Not done this before, could you give a brief "How to" please?
Click to expand...
Click to collapse
Download the attachment, place your ROM's .nbh with it and that's it. Use it as normal.

MisterGT said:
Download the attachment, place your ROM's .nbh with it and that's it. Use it as normal.
Click to expand...
Click to collapse
I did what u say, put the signed .nbh in the folder and ran the rom update utility.exe, it installed phone rebooted and now cant get past the touch diamond splash screen phone wont boot any ideas?
What is the rapitool.exe ?

I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen

Its ok i did some reading and im back up and running Many thanks guys.

is this a good app? wondering if i should give it a try...

eltoro said:
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Click to expand...
Click to collapse
I thought it might be, but searching didnt bring it up for me at least. So we should make it a sticky as it is in the TP2 forum.

!Aman! said:
try the RUU from attachment and let me know if it worked.
Click to expand...
Click to collapse
works thanks

eltoro said:
I've posted before the Task29 for Touch Diamond 2 aka Topaz
http://forum.xda-developers.com/showpost.php?p=6446054&postcount=11
REMEMBER It's going to erase everything on your phone after that you could flash any ROM as usual, this Task 29 package will replace your boot screen
Click to expand...
Click to collapse
oops, never noticed it
xboxhaxorz said:
I thought it might be, but searching didnt bring it up for me at least. So we should make it a sticky as it is in the TP2 forum.
Click to expand...
Click to collapse
no need to make a sticky, we can add it to Rollup section. i was hoping that as OP you take the responsibility of updating first post with proper info, instructions, credits blah blah, so that it is as useful a thread as in TP2 section.

Related

ok.do it in your ways.

ok.do it in your ways.I don't need to do so many things and to be a thief even I don't own a herald.
happy now?
-----------------------
Go below the "Submit Reply" button until you see manage attachments. Click on browse (Make sure the file in a zip file.) and choose the file. Click on Upload, when it's done, hit close this window. Thanks it. Hopefully that's what you were asking.
ivanmmj said:
Go below the "Submit Reply" button until you see manage attachments. Click on browse (Make sure the file in a zip file.) and choose the file. Click on Upload, when it's done, hit close this window. Thanks it. Hopefully that's what you were asking.
Click to expand...
Click to collapse
thanks,but.how to resize the image in the post
I Don't Know How To Resize A Picture Uploaded.
A great work!Course , I have studied and have begun to attempt to be put into use very well...
DO remember,if you are not Hard-spl,your spl ipl is lower than 4.00.0000,Please don't run JUMPSPL or USPL-BETA3 by pof.
Trust me or you will find lots of bricks on street.
430 read/1 reply
Well I tried this and it definitely works. I didn't get any increase in the storage size but the Touch IT nbh was similar to the original nbh so that's probably why. Maybe it's a placebo but I feel the phone is now much more responsive. Great writeup!
xander803 said:
Well I tried this and it definitely works. I didn't get any increase in the storage size but the Touch IT nbh was similar to the original nbh so that's probably why. Maybe it's a placebo but I feel the phone is now much more responsive. Great writeup!
Click to expand...
Click to collapse
what had written in the post now.did not tell you how to increase,it is still writing.I can have 54M stroage total.
does it work with dopod c800 ipl spl 1.09?
i can't understand what i must do after this one
OK,now the jspl is working,you can flash anything your want.RUU ROMUpdateUtility.exe ,ok next--->next---- you will see "To Version:6.666.66.6" yeah confirm it and flash it. after finished,a new first splash will appear
Click to expand...
Click to collapse
=|
so are you guys can not find any value of this Thread? or what I write makes you confused?
canonyang_China said:
so are you guys can not find any value of this Thread? or what I write makes you confused?
Click to expand...
Click to collapse
Hey, don't be stupid, this is a very good and detailed howto. I think most people didn't try it, because hardspl wasn't released and were afraid of bricking their device... I just installed hardspl and i'm now trying to flash a bit around
So thanks for this good thread
Best Regards,
FL
Screenshots please!
canonyang_China said:
so are you guys can not find any value of this Thread? or what I write makes you confused?
Click to expand...
Click to collapse
Well, I tried this four five times today with as much as I can understand. Still my devide bricked everytime . Can you please please attach some screenshots to your article!? Actually I am confused about the Rom building part. When you say that using the htcrt.exe tool, the OTHER files except for OS, EXTROM and SPLASH must NOT be modified, do you mean I need to specify the other values (SPL, IPL etc) from the original RUU ROM files? Or do I need to keep them "None" in the tool? All these questions would be easily answered if you can put up some screenshots...
Many thanks!
ie5x said:
Well, I tried this four five times today with as much as I can understand. Still my devide bricked everytime . Can you please please attach some screenshots to your article!? Actually I am confused about the Rom building part. When you say that using the htcrt.exe tool, the OTHER files except for OS, EXTROM and SPLASH must NOT be modified, do you mean I need to specify the other values (SPL, IPL etc) from the original RUU ROM files? Or do I need to keep them "None" in the tool? All these questions would be easily answered if you can put up some screenshots...
Many thanks!
Click to expand...
Click to collapse
to keep them "None" in the tool.
I am sorry I don't know HOW to resize a picture uploaded.maybe I will try later

A couple of questions..

So Im a long time lurker, new poster. My wing came today and I would like flash OpenTouch 3 to it but Ive got a couple of questions first.
No matter how hard Ive searched, be it google or the wiki I still cannot find a definite answer about Hard-SPL. What is it, exactly? Do I need it to be able to flash OpenTouch 3?
Secondly, upon flashing the new rom, do I need to re enter all my network settings?
Shaihalud9 said:
So Im a long time lurker, new poster. My wing came today and I would like flash OpenTouch 3 to it but Ive got a couple of questions first.
No matter how hard Ive searched, be it google or the wiki I still cannot find a definite answer about Hard-SPL. What is it, exactly? Do I need it to be able to flash OpenTouch 3?
Secondly, upon flashing the new rom, do I need to re enter all my network settings?
Click to expand...
Click to collapse
Read all the links in "All importatn links"
and never say again: I searched - it is NOT true.
there is ALL i repeat ALL you need written down!
I did read through it, including the Hard-SPL link. I only see instructions on how to install it, not why, or what it is.
The only thing I can deduce from that and other threads is its for avoiding bricking your phone, but Im not installing stuff on my 300 dollar phone without a reason why or what it does, or if I even need it.
I know you get lots of questions repeated over and over, but damn, your own wiki's search function doesnt detail what Hard-SPL is, it only references the link on how to install it.
Shaihalud9 said:
I did read through it, including the Hard-SPL link. I only see instructions on how to install it, not why, or what it is.
The only thing I can deduce from that and other threads is its for avoiding bricking your phone, but Im not installing stuff on my 300 dollar phone without a reason why or what it does, or if I even need it.
I know you get lots of questions repeated over and over, but damn, your own wiki's search function doesnt detail what Hard-SPL is, it only references the link on how to install it.
Click to expand...
Click to collapse
First off, welcome to xda...
You need to relax a little, its not that hard and if you do brick the devic you can always reflash the original...
On the original thread for the rom, there is a FAQ section that should help you get started.
If you device is new and you have never flash it before then there is no need to HARD-SPL.
Posted by JLine05 Post:
Post 719
Here's the rom I use:
Open Touch Biggy v3.0 by ttran:
http://www.megaupload.com/?d=7GY2ZNKD
Then follow these steps:
II. How do I flash an NBH file?
a. USPL
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
That's it. Welcome to the flasher's world.
Instructions by Ivanmmj
Also,
In the future, please keep all questions in the original thread, this makes it eaiser for me and others to help you.
Enjoy!
Thank you, and I apologize for the post. Hopefully I'll be back later with your rom on my phone. :-D
I USPL'd. No biggie. What I think it does is writes some code to your device to ignore the security certificates or whatnot. Basically allowing you to install unofficial ROMs. The creator kindly put an image of Tux on there so I at least know it's Linux based.
That's my take on it.
Shaihalud9 said:
I did read through it, including the Hard-SPL link. I only see instructions on how to install it, not why, or what it is.
The only thing I can deduce from that and other threads is its for avoiding bricking your phone, but Im not installing stuff on my 300 dollar phone without a reason why or what it does, or if I even need it.
I know you get lots of questions repeated over and over, but damn, your own wiki's search function doesnt detail what Hard-SPL is, it only references the link on how to install it.
Click to expand...
Click to collapse
Sorry. BUT on IvanMMJ thread about "How to flash" and "Neewbee guide" there is all discribed.
But thanks for ttran... now we have the 101st HOW2!!
hahaha
Remeber, check your SPL to make sure it's higher than 4.0 BEFORE flashing.
Determine SPL?
I have 2 MDAs and can see the IPL and SPL, etc., when I do a Soft Reset. However, with my new Wing I do not get that data displayed on Soft Reset. So, I checked Device Information:
ROM: 4.10.531.3 WWE dated: 03/15/07
Radio: 02.83.90
Protocol: 4.1.13.37
ExtROM: 4.10.531.103
Is there some reason that I do not see the IPL, SPL, etc., on Reset?
I assume that my SPL is what my ROM is, 4.10.531.3.
Thank you.
asctony said:
I have 2 MDAs and can see the IPL and SPL, etc., when I do a Soft Reset. However, with my new Wing I do not get that data displayed on Soft Reset. So, I checked Device Information:
ROM: 4.10.531.3 WWE dated: 03/15/07
Radio: 02.83.90
Protocol: 4.1.13.37
ExtROM: 4.10.531.103
Is there some reason that I do not see the IPL, SPL, etc., on Reset?
I assume that my SPL is what my ROM is, 4.10.531.3.
Thank you.
Click to expand...
Click to collapse
On the Herald, you have to place the phone into bootloader mode to see the SPL. I believe all Wings are 4.0 and above, but you can never be too sure.
ivanmmj said:
On the Herald, you have to place the phone into bootloader mode to see the SPL. I believe all Wings are 4.0 and above, but you can never be too sure.
Click to expand...
Click to collapse
Thanks for your quick response. I do appreciate your time and help. Mostly, all of your posted information.
What is the purpose of the SDDAEMON.INK in the Startup file? I have done searches on this and cannot find a definition of what it does or what it starts up.
well sd would probably the memory card
daemon is a background, "gofer" like file that automatically does computer requests
sometimes abbreviated as "d"..as in syslogd.. for a system log daemon file...blablah
and a .ink file is an image file with recorded information in it... usually used for shortcut icons
but yeah.. i have no idea, sorry
asctony said:
Thanks for your quick response. I do appreciate your time and help. Mostly, all of your posted information.
What is the purpose of the SDDAEMON.INK in the Startup file? I have done searches on this and cannot find a definition of what it does or what it starts up.
Click to expand...
Click to collapse
It's supposed to be a short cut to initialize Cyberon's Voice Speed Dial. The reason you didn't find anything is because it's SDDAEMON.LNK not INK.
mv3 said:
well sd would probably the memory card
daemon is a background, "gofer" like file that automatically does computer requests
sometimes abbreviated as "d"..as in syslogd.. for a system log daemon file...blablah
and a .ink file is an image file with recorded information in it... usually used for shortcut icons
but yeah.. i have no idea, sorry
Click to expand...
Click to collapse
lol. You get 10 points for the answer anyways.
ahh.... sooo sd meant speed dial... hehe
ivanmmj said:
It's supposed to be a short cut to initialize Cyberon's Voice Speed Dial. The reason you didn't find anything is because it's SDDAEMON.LNK not INK.
Click to expand...
Click to collapse
Thank you again. I just did a search on the SDDAEMON.LNK and found the information that you provided me. I really don't like to ask for help until I have searched for a resolution. If I can provide help, I normally try to.
Thank You!
asctony said:
Thank you again. I just did a search on the SDDAEMON.LNK and found the information that you provided me. I really don't like to ask for help until I have searched for a resolution. If I can provide help, I normally try to.
Thank You!
Click to expand...
Click to collapse
No problem. I figured you were trying to search but that I instead of L kills.

re flashing

hi,
i re flashed my phone last week and want to do it again as i have tried all sorts of programs and removed some and i think all of this has slowed my phone down and i have been getting a few problems so what i want to know is can i just re flash or do i have to do HardSPL again before i re flash ?
Tony
morpheus95 said:
hi,
i re flashed my phone last week and want to do it again as i have tried all sorts of programs and removed some and i think all of this has slowed my phone down and i have been getting a few problems so what i want to know is can i just re flash or do i have to do HardSPL again before i re flash ?
Tony
Click to expand...
Click to collapse
did you already hardspl? If it was successful its a one time only operation. You should not have to do it again.
P1Tater said:
did you already hardspl? If it was successful its a one time only operation. You should not have to do it again.
Click to expand...
Click to collapse
hello,
i did do the hardSPL but i was getting the white screen and had to do the other method which i forget which why it was but i am running Duttys rom at the moment.
i see that Dutty has a new Rom out now anyway so i might as well give that a try.
i want to use pocket plus and pocket weather on this ROM should that be ok
Enter bootloader mode for me and tell me exactly what it says.
Hold donw the camera button and at the same time insert the stylus in the reset hole until you enter bootloader
KAIS130 MFG
SPL-1.0.olipof
CPLD-8
morpheus95 said:
KAIS130 MFG
SPL-1.0.olipof
CPLD-8
Click to expand...
Click to collapse
your good, rock on.
ok thanks,
so all i need to do then is like before download the new Rom and open it ?
morpheus95 said:
ok thanks,
so all i need to do then is like before download the new Rom and open it ?
Click to expand...
Click to collapse
Yep. just flash away.
thanks for your help
P1Tater said:
Yep. just flash away.
Click to expand...
Click to collapse
That's 2 consecutive threads I've read with your posts in them and not a flame in sight - man, you need a holiday
ach2 said:
That's 2 consecutive threads I've read with your posts in them and not a flame in sight - man, you need a holiday
Click to expand...
Click to collapse
You might be on to something. Actually, upon suggestion by one of the mods, I have been updating the Kaiser FAQ and I realized it was quite hard to follow since more than half of it wasnt in Q&A format. I sure could use some help with it. Im about to pull my hair out. I might go on a rampage here shortly though.
P1Tater said:
You might be on to something. Actually, upon suggestion by one of the mods, I have been updating the Kaiser FAQ and I realized it was quite hard to follow since more than half of it wasnt in Q&A format. I sure could use some help with it. Im about to pull my hair out. I might go on a rampage here shortly though.
Click to expand...
Click to collapse
I'm a bit of a twat at some of this stuff, but if you need help - maybe easy stuff like proof reading etc, send me a pm.

what am i doing wrong

ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
when did you buy your wing???
and are you using flashcenter ?? so it can temporary cid unlock the device?
i got my wing in feb or march 08. yes i do have flash center, and i have used it w/o problems before. i have flashed from touch it to open touch and one of aserg's roms too. i have been using OT 4 lite black for weeks now. i have been watching the threads about the new OT 5. so i downloaded it and nothing new is flashing.
does this help any?
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
ttran i'm honored!
ttran001 said:
Please provide more details as to how your trying to flash your device.
Are you using the standard activesync method or via SD?
Regards,
Click to expand...
Click to collapse
iwas hoping not to bother any of the main guys with this little problem, but i'm glas your here (love your OT's btw ). ok, i am using the standard activesync method.
heres what i do:
1. download new rom and put it inside my RUU folder on my computer's C drive.
2. run the herald-uspl.exe.
3. follow the prompts
thats all i do and it used to work. i don't know if this helps, but it's the only other thing i have been doing diff. on another thread i asked if it was ok to delete old roms out of my RUU folder. i actually removed my OT v4 lite black and then put the OT v5 UL and ran the uspl. do you think thats what it is? maybe you have to have your old version in the RUU before you flash to a new version?
hope this helps
No. You don't have to have anything but your newest ROM in the RUU folder. When flashing, the phone doesn't know or care what you currently have flashed, unless that ROM is causing problems with your active sync. If that's the case, place your phone into bootloader mode, install the stock ROM (unless you have a HardSPL phone, and it sounds like you don't since you're using USPL.) Then boot up the ROM and run the USPL.
ok, so now know what to do, but why did this happen? whats wrong with the herald-uspl?
i just checked my device info and it says im running open touch v3! i thought that i was using v4. i have hard-spl downloaded, but i dont know if i need to use it or not. should it? then try to flash?
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
shep211 said:
Unlock your phone with hars spl then run the exe from ruu folder. This method worked for me. I did not try the other way since my phone is unlocked but it should work aswell.
Click to expand...
Click to collapse
OK, i'll give it a try
Link to unlock phone software and howto
http://forum.xda-developers.com/showthread.php?t=358225
digitalknoll said:
ok, i am totally confused. i had flashed to three different roms since joining this forum. i tried to flash ttrans OTv5.0UL and nothing happens. bootloader comes up, screen goes white, generic pda menu opens and all seems fine. when phone starts back up, all of my original setting are there just like if i only did a soft reset. i tried again with a different rom and the same thing happens. i have tried 4 times and nothing. can someone please let me know what i am doing wrong
Click to expand...
Click to collapse
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
dougstoner said:
I'm sure you already did this, but I'll throw it out there. Did you leave the original .nbh file in the ruu folder? I don't think you can have more than one .nbh file in that directory.
Click to expand...
Click to collapse
actually, here is exactly whats in the RUU.
i hope it helps
Ina Weetald
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
digitalknoll said:
ok, stoner, you got me.
that was the ticket. i was trying to flash about 4 things at once and i guess my wing flew over to the easiest nbh. i deleated all of them except the BAD ASS OT v5 UL. holy monkey!!! what a peach. i have to thank all of you for the help. i guess we all have these moments at some point in life. well i'm going to start playing around with the new rom. thanks again
Click to expand...
Click to collapse
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
it looks really sweet!!!!
dougstoner said:
Ha, wow that was a stab in the dark! Glad that helped man. So how do you like 5.0? I'm thinking about flashing to it...but heard so many issues with it though.
Click to expand...
Click to collapse
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
digitalknoll said:
OT-5UL looks great all around. this is my first time with ultimatelaunch, so thats cool too. i haven't been able to go thru the posts for some of the fix issues. the only thing i'm a bit bummed about is the amount of memory left after the flash (program-20) i'll keep playing with it. hey thanks again for the fix
Click to expand...
Click to collapse
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
dougstoner said:
Yeah man, no problem. I finally decided to hard spl, and tried out 5.0 and 4.0 and I think I like 3.0 the best. 5.0 seemed kinda buggy.
Click to expand...
Click to collapse
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
The HardSPL makes it so that if you flash a bad flash, you don't have to flash into the Stock RUU again just to get a working activesync connection to be able to flash again.
Courtesy of Ivanmmj
Step 1. Download Herald-USPL-Beta3. http://www.megaupload.com/?d=A4N36HLO
Step 2. UnZIP the file into a folder on your Desktop. Let's call it "MyFirstROM" for simplicity's sake. Notice that there is a folder called RUU within this folder now. Keep that in mind.
Step 3. Download your NBH file and unZIP or unRAR it into that RUU folder. Make sure that that NBH file ends up in the RUU folder, not within a folder inside the RUU folder.
Step 4. Place your phone into flightmode.
Step 5. Go back to the MyFirstROM folder and then run USPL.exe
Step 6. Follow the directions on the screen. EXACTLY.
* Your screen on your cell phone will go white around the 75% part of the "second step" now.
* ActiveSync will LOOSE its connection.
Step 7. One step 3 on that black window, the RUU flasher will pop up. Just follow the steps.
digitalknoll said:
i'm too scared to hardspl. i have the download, but not the nuts to try it. whats the hype about it anyway? it seems like some sort of badge for people in here. not you, but you know what i mean?
i'm gonna let the pro's go as far as they can with the OT V5 UL version and then probably go back to v4. gonna miss the UL (damn).
Click to expand...
Click to collapse
Hey, I was scared for a LONG time to do it...I read so much info before I finally decided to do it! It took me like 2 weeks of reading before I decided. It's an EXTREMELY simple process. Plus, it makes flashing easier. I was getting weird errors trying the USPL method sometimes. Anyway, just do this.
FIRST, make sure your IPL number is atleast 4.000 or higher. You can check this by holding the camera button down, and then doing a soft reset. HOld the camera button down till you enter the bootloader menu. (It's like 3 gradient colors).
If it's higher, great, you are ready to proceed.
Next, download this file.
http://rapidshare.de/files/38148213/...l_WM6.rar.html
Unzip it, and it will contain 3 .cab files you need to install in a certain order.
1. Install canonyang.cab
2. Next, aserpolicy.cab
3. disablesecurity.cab.
Do a soft reset.
Put phone in flight mode!!!!
Now, go to the folder you just unzipped that file from. I think the default folder will be called hard-splwm6 or something like that. Go and run the RUU.exe file in it. Just follow the instructions. The screen of your phone will go white, but just wait, wait, and it will reboot itself.
Presto, you are hard spl, and can load whatever rom you wish!

totally confused....about JUMP-SPL and HARD-SPL

I have watch videos...read instruction etc, etc, all I could on ATT Tilt/Kaiser flashing...I still don't have a clue. Do I do some type of CID unlock 1st....then is there a Jump SPL and than a Hard SPL. Is any of them two done from the boot loader screen. I can fix most electronics but I don't understand.. no you-tube video...i saw it on flashing the kaiser....sound quality bad for the hard of hearing (me).
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
1. download JumpSPL1.93-KAIS.exe from http://forum.xda-developers.com/showthread.php?t=354061.
2. get the hardSPL version you need for your rom. I used v3.56 from the link Carty gave you in the post above, because the rom I am using was based on the official att 6.1 rom. You may need a different one for the rom you want to flash I don't know too much about this yet. Leave the folder where you unzipped the hardspl files open on your desktop so you wont have to look for it later.
3. connect your phone to the PC, and transfer JumpSPL1.93-KAIS.exe over to your phone with activesync. Remove your microsd card if you have one on your phone (very important).
4.run JumpSPL1.93-KAIS.exe on your phone, it should go to a bootloader mode with the tricolor screen and underneath it will say USB.
5.Unplug the phone from the PC, wait about 5-10 seconds and plug it back in. Activesync should NOT be able to recognize your phone. If it does, something went wrong so start over.
6. Finally you can run the KaiserCustomRUU.exe from the hardSPL folder on your pc desktop and follow the instructions. It will load the HardSPL on your phone.
7. if you want to make sure it loaded, shut down your device and when your are turning it on press both the power and camera button at the same time, it will go into bootloader mode and show you what SPL is on your device. mine says SPL-3.56.Hard after I loaded the hardspl. You are now ready to flash a new rom.
This wiki helped me the most:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser#ROMx20.Upgrading
Read as much of it as you can, especially the "SPL questions?" link, that was the most useful for me.
I hope this helps
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
tricky_uk said:
All good advice! I just loaded the HardSPL on my phone for the first time and it worked perfectly.
Now all i need is a work connection that doesnt block my attempts to download ROM's!!!!!!
Click to expand...
Click to collapse
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
DaveShaw said:
LOL.
hjlow makes mirrors of the ROM downloads at Blogspot. Are those any good for you?
Ta
Dave
Click to expand...
Click to collapse
Sadly blogspot gets locked as well.......i've managed to download some stuff of here but in general sites it classes as 'personal storage' it gets a bit upset about...
if anyone knows any other way round i'd be eternally grateful!
ben_zin said:
I just went through this a few days ago trying to flash my first custom rom. I have to agree it is incredibly confusing and contradicting, which is why I'm taking the time to post this. Just read as much as you can about it and don't try to flash the rom until you understand. I am no expert on this by any means, but this is what i did on my tilt to flash HardSPL. I tried to make this as simple as possible just so you see the exact steps I went through, but i highly recommend reading the thread linked in the previous post by Carty above and the other link I'm posting at the very end.
Click to expand...
Click to collapse
Amen to that.. I like this guy.
Thx...clear and direct....now I am ready.
Carty said:
Goto http://forum.xda-developers.com/showthread.php?t=396922
Download Jump SPL and Run it. Then the hard-spl. This will then allow you to flash the custom ROMs on your Kaiser.
Regards,
Carty..
Click to expand...
Click to collapse
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
materijalmen said:
does this work on diamond?or i mean, should i frist jump spl ant hen hard, or just jump spl?
http://forum.xda-developers.com/showthread.php?t=408109&page=506 post 5055
Click to expand...
Click to collapse
This will then allow you to flash the custom ROMs on your Kaiser.
Click to expand...
Click to collapse
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
materijalmen said:
i have tried this already
http://forum.xda-developers.com/showthread.php?t=408621 but nothing has changed...i asked for help, but nobody answers....see the last posts int that thread.
Click to expand...
Click to collapse
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
denco7 said:
Unfortunately this is the Kaiser forum and you will get even less help here.
Post your questions in the Diamond forum and people will help,when and if they are able. And in the meantime, read and search and try to figure it out for yourself, All the steps and instructions are there.
Sometimes people, unfortunately, mistake this site for the HTC free support line, with 12 techs waiting at their PC's to help. Then they get irritated that no one answers their requests for help on a timely basis . If people won't or can't answer your questions then you need to figure it out on your own.
The bottom line is, if you don't know what you are doing, then you shouldn't be messing around with your phone. Sorry
Click to expand...
Click to collapse
I second Denco Read Read Read Read Read........ as anything you will ask, or can even think to ask..... more than likely has ALREADY been asked AND Answered.
Htc XDA member: how can I help you today?
Xda Newb: My phone isnt working.... Can you fix it ?
Htc XDA member: is your phone plugged in and turned on?"
Xda Newb:Wheres the on button?
( 1 min later) where do I plug it in at ?
(2 mins later) whats a battery?
(2.25 mins later) how do I know its on?
(2.3 mins later) why wont you answer me ?
(2.35mins later)Why arent you telling me my answers?
(2.4 mins later)whats wrong with my phone?
(2.5 mins later) You guys must be jerks because you wont spoon feed me [email protected]@@!!!
XDA MODERATOR : you noob you are banned for not reading PAGE 1 of the GODDAMN WIKI as all your answers were right there 1 click away. Now you cant access them HAHA. This is what you get for being IMPATIENT AND ANNOYING ( They should really do this here )
LOL
Just my rant
denco7 said:
No , this is what works on the Diamond
http://forum.xda-developers.com/showthread.php?t=414835
Click to expand...
Click to collapse
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
kyniemxotxa98 said:
How is this link related to the topic?
I want to use JumpSPL to change the version of HardSPL I have on diamond b/c my USB port does not work.
Click to expand...
Click to collapse
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Will it work on my TP/Excalibur? No as phones have different hardware to which is why h-spl's are device specific.
The best way to help yourself and not get a brick "expensive paperweight" is to head to device subforum and do some reading, as last thing you want is to be creating a thread named "Help"
denco7 said:
And what I said was that this was the Kaiser forums and not the Diamond forums. Putting Kaiser Spl's on a Diamond will brick your phone faster than throwing it into a bucket of water. So I gave him a link to the Diamond forum and Diamond Security/CID/Sim unlocker.
How is your question related to the Kaiser forums ?
Click to expand...
Click to collapse
Since I cannot find anything helpful in Diamond forum, I dig around in other forums to try to rescue my phone and make it usable.
Which is a recipe for diasaster...seriously, if you are gonna do something as stupid as to try to make something SPECIFICALLY for another device work on yours, then you do not deserve to own a Diamond.

Categories

Resources