Hi everyone
my first post, I have a problem with my Diamond on Orange.
My data connection seems to lock out if I have been in an area of low coverage this results in not being able to connect to my Gmail account using the email function of the phone.
I have downloaded and installed the wm 6.1 patch for fixing corrupt email account. The workaround now though is when it still locks me out of using my data connection I have to reboot the phone.
I have also installed the official new rom from the Orange site, can't access the HTC site ROMs as my device serial code is linked to Orange
It's very frustrating having to reboot your phone 6 times a day (my office is in a low coverage area)
also since last week the phone makes no sound for SMS, MMS, calendar reminders etc. I have checked the sounds associated with these events and they play ok when you click to test them but not when an SMS etc arrives
please help, I'm locked in to this phone till next Aug
Thanks in advance
Steve
Try this...
Rather than rebooting your device, have you tried going to the settings tab on TF3D, selecting communications and tap the 'Data Connection' setting? I'm not sure about the stock Orange ROM, it may not have the option to switch the data connection on and off. If it hasn't, try turning Airplane mode on then off again. Your connection should then be re-established.
As for your sound issue... make sure you have the check box selected for 'Events'. Go to Settings / Personal / Sounds & Notifications and check the top most box
Thanks for the info Graham.
I can confirm that the box 'Events (warnings, system events)' is checked but still no sounds on sms, calendar event etc
not sure where I find the settings tab on TF3D but can try the airplane mode tomorrow at work were I have the low coverage issue.
Thanks for taking the time to give the advice.
Is there a new rom out there I could install as a permanent fix for the data issue?
Thanks
Steve
Mmmm...
Not sure whether a ROM change will cure your problems. It may just be related to your carrier (Orange). I've tried numerous ROM's and radios, but never had an issue with the data. You could try flashing a different radio. Do you know what version your device is running now?
If you look here, you'll find all the various radios available. I'd definitely start with a radio change before flashing ROM's if you're happy with your Orange ROM that is
Hi
The Radio is 1.00.25.05, (ROM is 1.93.405.1 WWE)
are these any good ones or should I update to a new Radio
Thanks again
Steve
Mmmm...
That's what I thought... both the ROM and Radio version are very old (by XDA standards!). I would certainly upgrade your radio, if not the ROM as well. Make sure you upgrade the HardSPL first though or you'll end up with a nice paper weight!
Follow this tutorial to the letter and you'll be fine. That's all I did. Most of the custom ROM's here don't include a Radio, so you'll need to upgrade that seperately. It's all in the guide. If you've already upgraded the SPL, you can go ahead and flash a ROM / Radio.
The ROM I'm using is Gen.Y D2 R4.2 which you'll find in the ROM section along with a host of others. In my opinion, it's the best by far
Thanks Graham will read all the info and give it a go
Steve
Hi
Managed to get radio 1.13.25.24 on but can't find a live link for ROM Y D2 R4.2
any chance you could post one for me
Many thanks for all the help up to now, I'm realy looking forward to my Diamond working like it should
Thanks
Steve
Link...
Hi. The download links are halfway down Post #2 of the ROM thread... CLICK HERE
Hi
Thanks for all your help. I am now running on radio 1.13.25.24 and ROM Y D2 R4.2
Early days but there is defiantly some improvement in data connection/reception but I am still getting the issue where the data connection corrupts and won't connect even when full network coverage is restored.
Thanks for the workaround suggestion re turning airplane mode on then off this does work and negates having to re-boot.
Is there any way I can overcome the basic issue re the data connection corrupting in low coverage areas?
Is a radio available that will up the coverage even more, battery life is not important to me?
Thanks again
Steve
Tip...
Another way, which may be quicker. On the settings tab in TF3D, tap connections and you should have a 'Data Connection' option. If you switch this off to disconnect your GSM data connection, the next time your device needs to connect it will re-establish the connection. This doesn't help with your issue, but it is quicker than turning Airplane mode on and off.
It might be worth posting in the Radio thread to see if anyone has experienced this on Orange and found a workaround. Like I said, I've not experienced data issues like this, so I can't really help. You've changed your ROM and your Radio, so it seems it's not ROM or Radio specific... it does seem to point to carrier??
Hi Graham
I’ve spent some time getting used to the new ROM, it seems to be a big improvement over the standard Orange one and I do occasionally get a data connection in my office which is unusual. I think what I really need is some sort of signal booster stuck to the window.
One thing I notice with the new ROM is a lack of a calculator; can I add this on in some way?
Thanks
Steve
Related
I have installed the 1.12.10 GSM on it after making backups with aWizard. I am happy to report that it does work and that it does speed up the initial connection. Before (with 1.09.11 I beleive) I could log into (enter my PIN) and would still have some time before I would connect and get signal bars. It also seemed to increase refresh rates of the bars. Now the signal is usually found before I even finish entering my PIN muchless the today screen loading.
These tests were made in my basement at my house where I typically have been getting 1-3 bars. now to test 1.13.10 and 2.8 OS to see if it works.
I will say I thought it broke at first because I couldn't get my PC to talk to it after it reloaded, then I did another soft reset and the boot screen the second time didn't list the GSM version, even though the OS did see and use GSM. I re-ran the CID unlock procedure again since I could talk to the phone again. Reset again and GSM ver was on the boot screen again.
I also swapped out the boot screen for a bmp and that worked wonderfully. my only question is if there is a way to swap out the booting screen of the OS and not just the IPL Rom.
cheers,
ET
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
ok, i updated my 8125 to the new rom and am having two issues atm. first, the phone signal icon and the battery icon on the today screen is cut off so i only see the edge icon. secondly, i cannot start wifi at all, no matter what i do :\ (it looks like it's thinking but doesn't actually turn on ) now i did apply the cingular extended rom to this so i dont know if that caused both issues or not. as for edge performance, i'm in an area with bad signal so i couldnt exactly test it. i'm going to be clearing storage tonight and see if that fixes both issues or not. i haven't tested push e-mail as clubimates servers AREN'T supporting direct push (ie they don't have SP2 installed or have it enabled on exchange).
Locked up
Well I am noticing that it is locking up if I let it sit for a while to where I can't bring it back up. I have disabled the lock code to see if that fixes it.
I would have a feeling that the problems you are having are because of the enhanced rom difference. it won't hurt to try it as is like I did since you are having problems with it.
were can I fine install
I look for the rom in the ftp but there is no RUU install of 2.16.9.101 can you please tell me where can I fin this rom
thank you
Here:
http://forum.xda-developers.com/viewtopic.php?t=42638
Scroll down to HTTP server link.
Cheers
thanks
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
after the upgrade i cant find the GPS ICON
even i try to delete the redirect string in the registry like i used to do before
still i cant see the icon on my setting page
please anyone noticed this problem ?
tx
exchguy said:
Are you having the same issues as darkjedi who said he's having problems with WiFi and signal strength icon?
Click to expand...
Click to collapse
i finally fixed the signal strength icon (but don't ask me how), but wifi is still borked
no more problems, lock ups or otherwise
My guess with my problems were related to Battery Pack Pro demo. Even on the original rom I couldn't get it to work right with the assignable hard keys.
Anyway, I did not modify the original EXE one bit like darkjedi said he did. He seems to be much more advanced as I don't know how to do what he did and not that familier with its registry settings yet. But I naver had any problems with Wifi nor with icon placement.
My home wifi does use WPS-PSK TKIP using a Netgear WG302. Battery life seems good, but I do get a little crackle every now and then on my end of the bluetooth handsfree. People I talk to haven't said they hear anything other than perfect clarity. I would have been told if they heard anything since part of my reason to spend the money now rather than later was my voice and signal quality on my old Nokia was getting to be bad and they wouldn't waste a second ragging me if voice and signal problems were re-appearing. But mostly the crackle is few and far between and usually when my headset is on the other side of my body or I am a few feet away from my phone.
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
i dnt see the rush to upgrade if u have a cingular 8125 since there goa offer rom upgrades for the unit. with all the bugs i rather just get a ad2 bt plugin (wish they made it) and just do that
what roms do they offer? On my past phones I have had to have major problems before they would flash a new version of the Rom (my last 2 symbian phones).
darkjedi said:
i didn't modify the original EXE, i installed it as normal, then after the fact, copied the cingular extended ROM then installed each cab manually. i didn't get a chance to try wifi before i applied the extended rom, but i just might hard reset and try that.
Click to expand...
Click to collapse
ok... the only cab I installed for Cingular was the one I mentioned earlier. I have since installed spb power plus and their weather app and I am still stable. Not one failuer and my bluetooth is actually acting better from some reason. I was working on my car today with teh phone in the car and I was about 10 feet away without any noise or other problems.
Re: thanks
ethorn said:
thank you for giving the info on where to get the link. I have been away from a pc today.
as an update: the phone seems to be stable with the new rom (I am actually using the phone now using edge and it seems faster than my old phone was which was a nokia.)
I haven't had it lock up on me since I uninstalled battery pack pro, disabled lock code, and uninstalled skype & backgammon so take your pick as to what fixed it. I will do some more expereriments to try and figure iit out.
later,
ET
Click to expand...
Click to collapse
Is there any settings to configure edge? I only see GPRS in the connections section.
This version appears quite stable but's only my second day since upgrading my 8125 from the QTECH 2.8.7.102. I really like the Comm manager and the Push Email icon works great.
Thanks!
name of account
the only thing that I have notice so far is that the name of my celular company (I could see before upgrade) now i only see numbers.
exchguy said:
I also have the 8125, so I am curious if the Imate ROM will cause any problems after the upgrade. I am not sure I want to wait a few more months until Cingular gets around to providing their upgrade.
Some other posters with the test/beta Qtek AKU 2.0 rom reported that they had trouble with the device resetting itself and problems with Wi-Fi. Let us know if you experience any issues with this ROM.
How has EDGE speed been, any improvements over the shipped ROM? Have you tried push email?
Click to expand...
Click to collapse
On the new imate ROM I'm getting between 65 and 110 kbps on edge. Latency is still crap at about 1.5 seconds on average, but that's what it's always been for me.
Direct push is great. Assuming you have Exch SP2 installed, push works without any other changes. I'm averaging between 7 and 10 seconds for an entry to push out after it gets to Exchange. I haven't installed the device management tools yet, but I'll do that soon and let you know how well they work.
I just noticed wifi isn't working. If I enable it in comm manager, the button is ringed in green as if it's on, but the left green led does not blink and it does not detect my open, unsecured access point. I did install the cabs from my original cingular extended rom, and one of those appears realted to wifi, but not sure what it does. I'll mess around some more and see what I can do. I'm not totally heartbroken that wifi is messed up, but it does bug me that I don't know why it aint working.
Need Cingulcustomize_No_Emails.cab file
ethorn said:
I have just done the RUU install of 2.16.9.101 which also upgrades IPL/SPL to 2.16. It changed my radio version to 2.7.10 and my protocol version is 413.1.0.3. This ROM date is 2/6/06.
Immediate differences are the battery notification is now at the top where on Cingular's ROM it was at the bottom next to the comm switch program. That and everything is I-Mate branded. No Get Good, but instead now I have I-Mate backgammon and Skype. And instead of the Cingular Mail link now there is an I-Mate mail link.
I will update later with more.
More... OS ver 5.1.195 build 14847.2.0.0 IDK if this is different or not.
Update 11AM: I have tested more. ZPhone themes I can't seem to install... IDK why but with the original Cingular ROM I couldn't either. The original ROM had a bug that used the proxy of the modem setting on the wifi setting making wifi not work unless you went and disabled it since it is enabled by default. This new rom after installing "Cingulcustomize_No_Emails.cab" to get MediaNet back, wifi just works. Even with the Proxy set on the modem connection. My Bluetooh headset (Jabra HT800) works great. Comm Manager is real nice. Even showing you the status of SMS and GPRS/EDGE connection. I want to play with it a little more to see if I can control those two or not. Gone from teh Cingular ROM is the ability to click on the Edge status icon in the notification area and tell it to turn on Wifi. But the Turn on Flight Mode still exists under the Cell Strength bar. Signal strength is comperable to the 1.12.10 radio rom I had before the upgrade. And IDK if it is taking longer to load from a reset or not, but before the Phone radio would be up and running just as I was finishing putting in my PIN unlock. But now it is running and connected before I can even start to input it. Just observation, that extra second doesn't mean anything.
Click to expand...
Click to collapse
Where did you get the "Cingulcustomize_No_Emails.cab" file? I have searched everywhere and cannot find it! Help?
enjoy....
regards
faria
ftp://[email protected]/Wizard/Roms/faria-roms/radio2.40.11.zip
The link doesnt work for me faria. I just went to the ftp site and manually downloaded the rom.
I cant access the FTP site. It keeps asking me my usnername or something so I figure the xda login name right, but it doesnt work. Can someone upload it somewhere thanks
Thanks
Download works fine for me. Just put xda in for the password. I'll check it out and see if its a reasonable alternative for the 2.19.11 rom and my Cingular service!
Regards,
edhaas said:
Download works fine for me. Just put xda in for the password. I'll check it out and see if its a reasonable alternative for the 2.19.11 rom and my Cingular service!
Regards,
Click to expand...
Click to collapse
Thanks, I finally was able to download it. One question before I upgrade. Maybe Faria can give his input. I am a T-mobile user currently on the 2.19.11 radio rom. This seems to be the best one overall for me since it allows both data and voice calls at the same time, there are no missed calls. But reception/signal is somewhat not good. Does this new radio give better reception for T-Mobile as well as allowing both data and voice?
Thanks
Great radio rom but isn't 2.69.11 newer then 2.40.11?
Well, right, it is newer most likely. The thing is, newer isn't necessarily better for each person's circumstance. Radios are tuned for particular providers in particular places and are usually matched with particular roms. However, in my case for example, with Cingular US service, and WM6 roms, my experience and that of many others is that the 2.19.11 T-mobile UK rom is the best. The others were inconsistent in alerting me to incoming calls and pending voicemails. However the data and sound was better with the newer radios. For me not missing calls was most important, so I stick with the older rom. But, this is a new one for me, and hope springs eternal, so I'll probably give it a try and see if I can have the best of both worlds like those T-Mobile guys.
Regards,
working well on farias "the real thing"?
raiden said:
Great radio rom but isn't 2.69.11 newer then 2.40.11?
Click to expand...
Click to collapse
From what I understand, 2.69.11 is the latest released German Radio rom, but 2.40.11 is a US released rom. So this may work better for US customers. I hope we can use 2.40.11 with WM6!
testing
in the midwest US of A baby.. smoke you!
Just installed it! I will post back my results.
Since I finally experienced the awful delay in SMS receiving on the 2.69 radio ROM (after several weeks of success, I missed 4 important text messages in an hour's timeframe), I'm game for this. Downloading now...
So far my signal seems to be much better than 2.19 radio. but only time will tell.
bigrob119 said:
Since I finally experienced the awful delay in SMS receiving on the 2.69 radio ROM (after several weeks of success, I missed 4 important text messages in an hour's timeframe), I'm game for this. Downloading now...
Click to expand...
Click to collapse
I too am now noticing a delay\lack of SMS\Voicemail Msg after WEEKS of 2.69 working like a charm. I thought I was one of the lucking ones but now I am not so sure. Who knows how long this has been happening. Anyway, downloaded and installing right now.
Working great on WM2005 .
thanx Faria .
by the way...this is a US radio.....sorry i cant name the carrier at the moment.
I've installed this on my Cingular 8125 on the Cingular network last night. I received a test sms and another SMS from a friend in a timely manner. All test calls I've put through have worked so far. I was even downloading a webpage with Opera and phoned in and the call came through. So far so good... Tomorrow (Monday) will be the real test when I'm back to work, but I'll try to give it a workout today.
thanks for the info so far and please continue to post information on this rom and its working with wm6
P.S.-Sorry for not being able to also post information but in what i do missing a call/calls or missing a sms/sms' would cost me alot of $$$$$...(so thanks for being guinea pigs...poor pigs lol)
First timer dumb question
Hi. I am running Nottoosmart's system with radio 2.19. Things have been pretty stable, but there are times when I've had to reboot in order to reacquire the phone carrier after sleep (e.g. softreset). Also, subjectively I believe I have some signal problems when in places where there is already a weak signal.
So, bottom, line, I am considering trying this radio.
But, I have never flashed a radio before and I'd like to avoid having this become a "federal project." So a few questions:
1. I can flash the radio back and forth (e.g. ->2.40, ->2.19) *without* touching the OS (e.g. wm6 rom/ram), is that correct?
2. There are several executables in the zip: EnterBootloader.exe, romupdateutility.exe, RUUGetInfo.exe; I realize there are tutorials ad infinitum posted here, but can someone help me save some time by letting me know how to install the radio, do I just run "romupdateutility" over activesync, or is there more to do?
Please don't flame. I am an engineer, just not experienced in burning radios to MDA's. I assume the radio goes into a portion of rom that is dedicated to the phone processor of the OMAP chip?
perm said:
Hi. I am running Nottoosmart's system with radio 2.19. Things have been pretty stable, but there are times when I've had to reboot in order to reacquire the phone carrier after sleep (e.g. softreset). Also, subjectively I believe I have some signal problems when in places where there is already a weak signal.
So, bottom, line, I am considering trying this radio.
But, I have never flashed a radio before and I'd like to avoid having this become a "federal project." So a few questions:
1. I can flash the radio back and forth (e.g. ->2.40, ->2.19) *without* touching the OS (e.g. wm6 rom/ram), is that correct?
2. There are several executables in the zip: EnterBootloader.exe, romupdateutility.exe, RUUGetInfo.exe; I realize there are tutorials ad infinitum posted here, but can someone help me save some time by letting me know how to install the radio, do I just run "romupdateutility" over activesync, or is there more to do?
Please don't flame. I am an engineer, just not experienced in burning radios to MDA's. I assume the radio goes into a portion of rom that is dedicated to the phone processor of the OMAP chip?
Click to expand...
Click to collapse
Hello,
1) You can flash the Radio rom without messing with the OS. All of your settings and files will not be affected. It does not require a hard reset.
2) Just run the romupdateutility.exe. It works the same when you flash a new os rom, it just takes a fraction of the time due to the fact you are only flashing the radio. I just connect via USB and let activesync do its thing then run romupdateutility.exe, the program will kill activesync itself.
I hope this helps.
Over the last week or so my htc has been driving me nuts!
Calls just dont come through to me. It seems to be going straight to my mailbox and then Text messages are also delayed.
I cant make calls as it drops it before it even connects with the other party.
However, when I soft reset it works fine to just after the 1st call I make.
I dont want to hand it in for repairs, that saying if I can fix it myself with the help of Xda-developers.
Can anybody help me?
Have you tried different radios?
what you mean radio?
right ..
here is my info
ROM version : 1.56.405.5
RoM date : 08.28.07
RADIO Version 1.27.12.32
Protocol Version : 22.45.88.07H
Wow.... we have some real geniuses here these days. Have you ever thought about looking at the first page of the WIKI here???
http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
Start there.
Read
Read
READ MORE ........
Unlike others who flame people for not reading or searching I will not because you have stated you searched. The solution maybe simple... Do you keep an open data connection at all times? If so that maybe an issue, try ending the data call when youre not in use and see if that helps. Ive noticed with my tilt that if I keep the data connection always open my SMS will be delayed and won't recieve all my calls.
pyraxiate said:
Wow.... we have some real geniuses here these days. Have you ever thought about looking at the first page of the WIKI here???
http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
Start there.
Read
Read
READ MORE ........
Click to expand...
Click to collapse
If i seem to have a specific problem, it will take me a long time to find the solution.
so heres to that.
ill rather state my problem, Im sure there are forumites here, who really dont mind helping other people.
Proudpop86.. I think i know what you mean with regards to the open data sessions. Ill fiddle around and try and disable it and see if it works. Thanx for the heads up.
as one of boys said you can get all answers in wiki - but here are some info http://wiki.xda-developers.com/
it seems ur radio is bugged. need an update.
your radio rom is the firmware that makes your phone connected to your network provider http://wiki.xda-developers.com/index.php?pagename=KaiserROM_FlashingFAQ
you must know the compatibility of your os rom and your radio read the ultimate thread by alltheway http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
you need to perform a hardspl procedure before u change ur radio http://forum.xda-developers.com/showthread.php?t=334679
you will have different results (network strenght, wifi strenght, bt, gps, battery drains) with different radios http://forum.xda-developers.com/showpost.php?p=1862232&postcount=1464
if you are on warranty and new to all of these i advice taking ur device to agent and get it updated official (shipped) roms
stevh0 said:
Over the last week or so my htc has been driving me nuts!
Calls just dont come through to me. It seems to be going straight to my mailbox and then Text messages are also delayed.
I cant make calls as it drops it before it even connects with the other party.
However, when I soft reset it works fine to just after the 1st call I make.
I dont want to hand it in for repairs, that saying if I can fix it myself with the help of Xda-developers.
Can anybody help me?
Click to expand...
Click to collapse
thank you jahrami
seem to have been my Network type settings
If set on auto the phone drops calls, but if Gsm is selected, its perfect.
I do notice however that .. I only Gprs available now and 3G or Hsdpa is not used as usual.
A bit annoying , but i guess its better then the phone missing calls.
Sounds like you have the dreaded dead 3G radio problem. Forcing to GSM will work, at least for some time. If you want full functionality back, that will require sending the phone in for repair.
Anyway to fix it myself?
not really concerned with warrantee's
If it is what I and many others had, no. Only a mainboard replacement will do.
http://forum.xda-developers.com/showthread.php?t=335074
seem to loose all connectivity as soon as i select wcdma
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
omar302 said:
The same situation happened to my Diamond. I took it to the local dealer for HTC and after several days, I am told that the main board will need replacement. I am still waiting for it to be repaired as the parts had to be braught in from another country. I was also saud if the phone was less than a month old (which it is not) they would have replaced it with a new phone.
Good luck repairing yours and keep us updated.
Click to expand...
Click to collapse
Thanks Omar, I was kinda thinking that it may be hardware issue, but I don't anymore, I am trying something else actually as we speak. The only thing I haven't tried before is another hard SPL and I think that's the problem, I installed another version hspl1.34 and it seems more stable now and wifi keep connection, also with another hspl version (it was hspl 1.24) RAM under devise info>hardware showed 128, now it is 192. I will test in intensively and post my results here in case nay one else have the same issue. Hopefully I will not have to send it away for repair. Thanks for your info anyways.
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Kwasmir said:
In risk of sounding lame ...
Have ya tried 'Start' / 'Settings' / 'System' 'Wireless LAN'
Under Wireless LAN click 3'rd tab (strømtilstand in Danish - could be power-settings)
On that tab - pull the marker way to the left in order not to minimize the power consumption when tryng to hookup with the WiFi.
I had massive problems to get my local WiFi working at home - until I did this trick.
Best luck, Kindly
Click to expand...
Click to collapse
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
With my phone, i tired all Hard SPL versions and even went back to stock SPL & Rom 1.37 & 1.93 and it still didn't fix the WIFI issue. it will work for 5-15 minutes then it will not work.
Anyway, I got a replacement phone as apparently they couldn't fix it.
pufeks said:
Hi all,
I wonder if anyone can resolve/give suggestion for my problem.
Basically i have experience problems connecting via Wi-Fi i.e the after activating wi-fi the phone will scan for available networks and give you the list. I then try to connect to my router (bt home hub which is actually speed touch) it does connect and stays connected for some time then suddenly the connection is dropped and under wifi it says that my access point is unavailable. If i turn wifi off/on again and scan for networks it comes up with "No visible Networks detected" even though there are like 5 access points in my house and i can connect to any of them using my laptop and old nokia e60. If i wait a while it will connect again but will not keep the connection. I have tried at home, work and some public places-every time is the same story.
Things i tried:
Soft reset/hard reset (many times)
Tried disabling phone radio in case3g chip interrupts
I tried with secure networks, open networks, different types of authentication/encryption, different router (more than 10) and every its the same story. I also tried several ROMS and ALL RADIO's available with the same result.
I am currently on Duttys_Diamv2.3 WWE RADIO 1.00.25.08, its a clean flash, nothing else is installed. I also have SPL-1.40Olinex installed (not sure if that could have an impact) The phone is vodafone branded btw (i had the same issue with vodafone rom which is why i decided to try other roms). I wonder if anyone has any thoughts/suggestions and would appreciate any help. Thanks in advance.
Click to expand...
Click to collapse
...I have the same problems with you
However, I think the problem may caused by different ROM versions.
My hTC version Diamond initially flashed a Chinese version ROM, and the WiFi connects well, while I changed to Dutty's most updated ROM, this problem comes and I cannot figure out why untill now.
Some friends also suggested to go to the Power Management and change WiFi to "Best Performance", I tried and failed again.
WiFi can open and connect to Routers located in library of my university, nevertheless it cannot open any pages.
I'm also waiting for any person that can solve the problem and then help us figure out why....
thanks in advance!
I got the same problem as most of the people have. and i think "Fail to turn on wifi" is a very common among guyz who got HTC TD.
I dont know what should be done, i almost tried every thing. actually my phone was locked to 3 mobile Sweden and i unlocked it but my wifi was'nt working before unlocking too but i did'nt gave attention to it. Now i noticed it.. is that any one know how to lock it again soo that i can send my mobile for repairs or, any one know what should i do.
I would recommend upgrading your radio and your rom.
Ive been rocking the setup in my sig for some weeks now and its been flawless, stable and fast.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
Hi,
Im using AlphaZero V7 NLD,
Im have 1 wifi point in my house, downstairs.
even when im on the attic i have 80% signal strengt.
My router is a draytek 2820G router.
Wifi for me is very good. .. correctly, AZTOR V7 NLD is very good for me.
im on t-mobile network.
Radio Radio v1.00.25.05 , Radio v1.00.25.08, Radio v1.00.25.16, where all good,
now testing Radio v1.08.25.20, HDSPA signal is bit weaker atm.
my best radia atm i think, v1.00.25.08.
im betting, that the starter of this toppic, who has 5 access points in his house all have the same SSID. This is not the way.
Or make 1 big AP aera, bij connecting the AP's to each other.
of try to set every AP its own SSID, and its own Channel.
Louis
WIFI problem in HTC Diamond.........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
pranavsethi said:
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
Click to expand...
Click to collapse
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Wifi & Bluetooth not detected by HTC Diamond
Someone pl help. My HTC Diamond is not detecting bluetooth devices neither is detecting wifi. It was earlier doing so and working fine however I believe after installing tweak TD & t3d config it has stopped working. I have installed new ROM also but to no avail. Can someone pl help!!!!!!!!
Wintermoonlight said:
i am also having this problem, it can find the network, and can spend a minute or 2 trying to connect, and nothing happens. you posted this in february, did you find an answer?
Click to expand...
Click to collapse
i also have the same problem. it detects a wifi (my router at home Aztech brand), then trying to connect to it, and then it always showed the wifi as "unavailable". i put my phone 2 mm distance from the antenna of my router it also won't connect. i have change dozens of roms, win 6.1, 6.5, 6.5.1, different cook, MTTY, all with no success.
i've looked for internet and google for answers, i seen quite a lot of forum has described this issue, but with no solution. most of the ppl suggest in various forums to pull the wireless slider to "Best Performance", ofcourse i have done that, but is just the same result.
i'm still trying searching for a solution for this, i hope is not a hardware issue because my warranty has already ended. i'm currently using Gen Y R4.1B rom
pufeks said:
Yes i have thats the first thin you do anyways . I am now more than sure that the issue was with HSPL version 1.34, as soon as i got rid of it (installed hspl 1.24) all is fine.
Click to expand...
Click to collapse
Ok consider now wifi will work by re-flashing the spl.
But what is the relation between spl (os/winmo loader) with wifi?
another dang unsolved diamond wifi?
bravo.
same problem with wifi on diamond2
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
which rom and radio you are using. can you please help me in this matter.
and i think its not a hardware problem because its showing that hardware is connected to my device as its shown in the screen shoot
wjenya said:
With Original stock WM6.1 i was unable to connect at all, after flashed official WM6.5 upgrade everything worked fine. However i decided to put cooked rom because of battery life and perfomance issues. Dutty HG6 for Topaz seems to be with glitchy radio, it works sometimes, very rare, and i'm still not up to the pattern when does it happen and why. Pretty sure it's not a hardware problem - so everybody relax, we will find the solution.
Click to expand...
Click to collapse
nope, i also put Gen.Y WM6.5 then the problem still arise.
i'll wait any solution until my diamond is totally wrecked
Hi there,
Sorry if this a retarded question, I can't find anyone else that's asked.
Basically my unbranded Touch Pro 2 has in the data connection settings the default selections of UK and then TMobile.
What i need to know is, on these cooked ROMs will that setting still be there? If not where do i get the settings to reenable my data.
I'm going to do the HardSPL and flash thing tonight for first time. I'm a little aprehensiveso just wanna make sure I don't install some flashy ROM but lose my 3G browsing.
Thanks to whoever can set my mind at rest.
I have an unbranded tp2 on tmobile uk from expansys, connection settings with custom roms bring up tmobile uk. It did when i was flashing Kaiser roms.
Having trouble at the mo with mms on the current rom I've flashed but gonna do a bit of searching tonight to sort that.
(need to update my sig from kaiser to tp2)
cool, good to know someone else with sam setup. mine is from mobilephonesdirect.
I don't send a lot of mms, but what is the known issue?
Also were there any complications for you or a smooth install and Hardspl flash?
cheers
I think maybe we should take this to pm to keep the forum uncluttered? check your inbox.
@dazkeirle
My unbranded TP2's on T-Mobile and from MobilePhonesDirect too!
OK I was all up for flashing last night (HardSPL) but lost my bottle when i came to something which was not mentioned.
When i first started tot run the program, with my phone in an activsync connection everything was normal.
Then when i click Automatic flash, then ok on the next screen (before the screen with the picture of the TP2 on it) my TP2 goes into a kind of dead mode, black screen no lights.
Now i think this is normal from what I've read, but the weird thing is my computer indicates here that the USB is dropped and activsync disconnects, however some other drivers are then installed and the phone is sort of still connected (although that isnt indicated anywhere).
I was nervous as activsync was not there so hit cancel, did a soft reset on phone and all was still normal (preflashed state).
Please can somebody confirm that activsync only is there at the start and that the activsync will disconnect after you hit ok, it's not explicitly defined in the tutorial and I'm nervous of bricking handset.
Thanks
Click to expand...
Click to collapse
moved to newbie thread as bound to get better response there.