Can someone please clarify the exact differences between these SPLs?
As far as I understand it, the HardSPL *is* the Engineering SPL, and Haykuro's Danger SPL is slightly larger than the HardSPL, allowing larger ROMs to be flashed.
A little clarity would be very helpful.
Also, is there a performance advantage to using the HardSPL versus Haykuro's SPL for a ROM that can be flashed using either?
Actually, I believe the danger spl is the same as the engineers spl. Not the Hard and Eng. are the same. Can you do fastboot with the hard spl? I heard that you can't do that with it. I don't know. The only spl I have had is the perfected spl and the Engineers 1.33.2005 that I now have. i have also wondered the same question that you have.
tazz9690 said:
Actually, I believe the danger spl is the same as the engineers spl. Not the Hard and Eng. are the same. Can you do fastboot with the hard spl? I heard that you can't do that with it. I don't know. The only spl I have had is the perfected spl and the Engineers 1.33.2005 that I now have. i have also wondered the same question that you have.
Click to expand...
Click to collapse
No this is wrong. Engineering/HardSPL are virtually the same. The HardSPL has removed the regional restrictions from the Dream Engineering SPL, but they are the same. The Haykuro aka DangerSPL is actually an SPL ported from the HTC Magic for the HTC Dream. It repartitions the NAND, increasing the size of the system and data partition to ~90mb from around ~45mb by taking it away from the cache partition which is of no use to rooted users (it is used to store OTA's during the update process) This makes it possible to have ROM's up to 90mb on the phone.
You can do fastboot with all SPL's besides the stock SPL since they are ALL engineering SPL's (the .2005 is the Magic's engineering SPL as well)
Thank you for clarifying B-Man.
So aside from increasing the capacity for a ROM to 90mb, is there any performance gain to be had from voluntarily using the DangerSPL (1.33.2005), or from voluntarily *not* using it if not needed?
I was considering reverting to the HardSPL (45mb) if there is a performance gain, as CM 4.2.5 doesn't require the DangerSPL.
If there's no performance gain to be had, its a moot point....
maxawesome said:
Thank you for clarifying B-Man.
So aside from increasing the capacity for a ROM to 90mb, is there any performance gain to be had from voluntarily using the DangerSPL (1.33.2005), or from voluntarily *not* using it if not needed?
I was considering reverting to the HardSPL (45mb) if there is a performance gain, as CM 4.2.5 doesn't require the DangerSPL.
If there's no performance gain to be had, its a moot point....
Click to expand...
Click to collapse
There is no real performance improvement. It's just additional storage for your phone's rom.
B-man007 said:
No this is wrong. Engineering/HardSPL are virtually the same. The HardSPL has removed the regional restrictions from the Dream Engineering SPL, but they are the same. The Haykuro aka DangerSPL is actually an SPL ported from the HTC Magic for the HTC Dream. It repartitions the NAND, increasing the size of the system and data partition to ~90mb from around ~45mb by taking it away from the cache partition which is of no use to rooted users (it is used to store OTA's during the update process) This makes it possible to have ROM's up to 90mb on the phone.
You can do fastboot with all SPL's besides the stock SPL since they are ALL engineering SPL's (the .2005 is the Magic's engineering SPL as well)
Click to expand...
Click to collapse
You learn something new every day.
The performance improvement claims would be in favor of Haykuro SPL, but there is no real gain. The only reason this was claimed was because there was more space to store stuff (the same way a bigger harddrive speeds up the computer because theres more space to store things. there should actually be no performance difference)
I have been running Cyanogens Roms since I have rooted my phone
I dont even remember what spl I used. My fastboot looks like this http://twitpic.com/tmwtn (I found this pic on http://forum.xda-developers.com/showthread.php?t=589344)
I want to use/try out this rom
http://forum.xda-developers.com/showthread.php?t=592466
which requires the Danger SPL.
From what I have read here the DangerSPL and EngineerSPL are the same,
Is it safe to say I can flash this ROM?
If yours says "1.33.2005 (DREA10000)" then you have the "danger" spl. I wish some one would put a better explanation of this at the top of each forum so people would be able to figure this out. Just a sticky with how to fire up the fastboot screen and a list of the possible spls and radios. Maybe I'll work on the list.
Related
how do you find out what spl you have ?
can someone breifly explain to me what SPL is
and i right in thinking SPL is what can make a brick ?
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Downgrade to Hard SPL from Danger SPL??
AdrianK said:
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Click to expand...
Click to collapse
When I rooted my phone I installed Haykuro's danger spl with the latest radio. I didn't know it can potentially brick your phone (hence the danger part lol). I'm running cyanogen 4.0.1 and it's working just fine so far but I had 3 questions
1) Is Hykuro's Danger SPL only risky during the installation process or can it still possibly brick your phone after a successful installation (in other words, elaborate on the "danger" part please)
2) Can I downgrade to Hard SPL after installing the Danger SPL
3) How would I downgrade to Hard SPL?
Thanks guys!!!
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
rondey- said:
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Click to expand...
Click to collapse
AdrianK said:
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
Click to expand...
Click to collapse
Thank you guys! In that case I'll just keep H's SPL seeing that I already installed it successfully without bricking my phone (yay)
Really appreciate both of your time!
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Unless you are Unrooting and flash the original spl. I've done this many times so I know it works.
Does SPL: 1.33.2005 help the regular ROMS run better (Cyanogen's)?
I use dxTop, seems to run out of memory quickly.
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Thanks for the warning!
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
sasa3791 said:
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
Click to expand...
Click to collapse
If you didn't downgrade to RC29/7 then you should have the 1.5 radio. Check by going to Settings > About Phone and baseband version. It should be 2.22.19.26I.
I think you can just flash HardSPL as update.zip as you are, but I' not completely sure...
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I swear I've heard people say they have, but dowgrading the radio after installing Danger SPL did cause bricks...
I'll go check
You WILL brick your phone if you attempt to downgrade your radio after flashing the new SPL or if you do not have the latest radio installed before flashing the new SPL
Click to expand...
Click to collapse
Hmm can't find anyone that said they did :-(
FYI
FYI
@Adrian K and nephron
When I unrooted my spare G1, I got it completely back to stock (circa October original shipment stock)
I downgraded my SPL successfully from the danger SPL all the way back to the original SPL. Also when I downgraded back DREAIMG.nbh, I confirmed at the time that the radio downgraded with it. My original post was on the unlockr.com when I was trying to help David of unlockr.com with some tutorials.
My original quote from unlockr
BTW: I have confirmed via the bootloader that the radio DOWNGRADES back to stock by applying the DREAIMG.nbh update FYI
From the bootloader I am now at
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Click to expand...
Click to collapse
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I think it's downgrading the Radio, while on Danger SPL that will brick your phone b.
I have also gone from Hard to Danger back to Hard again with no issues.
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
polarbearmc said:
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
Click to expand...
Click to collapse
If you are talking about the one click method that is know on the market as recovery flasher, that only takes care of granting root access and flashing cyanogen's recovery image. The radio and spl upgrades are on you.
Try here for more explanation
http://forum.xda-developers.com/showthread.php?t=550050
yea that's what i'm talking about... now don't get me wrong, i believe you guys here on xda first and foremost... but theres a video tutorial on android and me, and it doesn't show them installing the radio and spl between using the recovery flasher and then installing cyanogens 4.0.1... are they not doing it right in the video or are the radio and spl optional? all the guides on here seem to say you do have to flash them but the video clearly shows them not stopping to do it. so maybe their video just sucks haha. but any idea on that?
thanks so much
I have 1 click rooted and installed Cyanogen 4.01, I am on CRC1, my understanding was as I was already on 1.5 Cupcake, my current SPL and Radio were current.
I read somewhere that the 1 click method is only temporary root. But if someone could elaborate on this it would be very helpful. Also what is this hard spl ?
Hi guys. I have forgotton on how to update my SPL And Radio. Also i would like to know whats the difference death and hard SPL? Or is there any different spl and radios?
The radio/baseband version is the version of the radios firmware. You should have the appropriate radio for your firmware version. If you have 1.5 or higher yours should end in 26I. If you're on 1.1 it will be a different version.
The SPL is the phones bootloader, you boot in to it by holding home and camera.
Radios and SPLs are not the same thing.
Both radio firmwares and SPLs are flashed via recovery. If your signature is correct you have the latest radio and Danger SPL (Danger is 1.33.2005, not .2006 but I assume that's a typo).
1.33.2005 (Can we stop calling it danger?!) repartitions your phones NAND (internal flash memory). It changes the size of the partitions, so (I believe) you have more room in /data and possibly /system (again, not too sure) so if you don't have the 26I it will fail and it will leave you with a corruped nand and a bricked phone.
I don't know much about HSPL but my impression is that it doesn't repartition the nand but features Fastboot (like 1.33.2005). As it doesn't repartition the nand it doesn't support many ROMs which require extra space (Almost all Heros, most Rogers), but I don't think it requires 26i.
Hope I didn't confuse you
Is it safe to "revert" to HardSPL from Danger SPL?
-I use the OpenEclair ROMs, and the newest ones seem to not require Danger SPL anymore...do you think I should change the SPL?
Baalzamon said:
Is it safe to "revert" to HardSPL from Danger SPL?
Click to expand...
Click to collapse
yes.. its safe
Baalzamon said:
-I use the OpenEclair ROMs, and the newest ones seem to not require Danger SPL anymore...
Click to expand...
Click to collapse
OE 1.2.2 needs Danger SPL, ignore what the changelog says it's wrong
http://code.google.com/p/openeclair... Type Status Priority Owner Component Summary
Baalzamon said:
do you think I should change the SPL?
Click to expand...
Click to collapse
nope .. why would you want/need to downgrade it?
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong(old) radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
Baalzamon said:
Is it safe to "revert" to HardSPL from Danger SPL?
-I use the OpenEclair ROMs, and the newest ones seem to not require Danger SPL anymore...do you think I should change the SPL?
Click to expand...
Click to collapse
There's almost no point in reverting. What's the harm in having the extra space for future necessities?
Firerat said:
yes.. its safe
OE 1.2.2 needs Danger SPL, ignore what the changelog says it's wrong
Click to expand...
Click to collapse
Nope. It may be broken, but that is a very minor tweak to fix.
nope .. why would you want/need to downgrade it?
Click to expand...
Click to collapse
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
lbcoder said:
Nope. It may be broken, but that is a very minor tweak to fix.
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
Click to expand...
Click to collapse
Why revert and have to risk another potential brick when he's already using the DangerSPL and successfully installed it without a brick?
lbcoder said:
Nope. It may be broken, but that is a very minor tweak to fix.
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
Click to expand...
Click to collapse
accidental bricking? How do you accidentally flash an old radio with out knowing? The newest radio that was just posted in the dev section is compatible. Basically the reason why the old radio wasnt compatible with the Danger SPL is because the Danger SPL is simply the MT3G SPL just modified to be used on the G1. The MT3G was never compatible with the older radio since it came out after the radio update. Also there are advantages to having the Hard SPL do some research before bashing SPLs.
http://code.google.com/p/android-roms/wiki/SPL
http://forum.xda-developers.com/showthread.php?t=625886
Joe333x said:
accidental bricking? How do you accidentally flash an old radio with out knowing? The newest radio that was just posted in the dev section is compatible. Basically the reason why the old radio wasnt compatible with the Danger SPL is because the Danger SPL is simply the MT3G SPL just modified to be used on the G1. The MT3G was never compatible with the older radio since it came out after the radio update. Also there are advantages to having the Hard SPL do some research before bashing SPLs.
Click to expand...
Click to collapse
I have looked into your future.. I see a long, aggressive post from lbcoder detailing EXACTLY why you're WRONG.
He's quite passionate about this spl.
goldenarmZ said:
I have looked into your future.. I see a long, aggressive post from lbcoder detailing EXACTLY why you're WRONG.
He's quite passionate about this spl.
Click to expand...
Click to collapse
I am not wrong our opinions just differ. I use to be against the Danger SPL also until I flashed it myself and seen that it was safe if you could follow directions which is why I made a How-To for others.
Joe333x said:
I am not wrong our opinions just differ. I use to be against the Danger SPL also until I flashed it myself and seen that it was safe if you could follow directions which is why I made a How-To for others.
Click to expand...
Click to collapse
I'm not saying you are wrong, but I'm pretty sure he will.
Personally, I think the 2005 spl is pointless on a g1, but I flashed it ages ago and see no point reverting. There definitely is an advantage to the hardspl for non-US users though.. Some of the european people in particular need the ability to flash international images to get root in the first place.
goldenarmZ said:
I'm not saying you are wrong, but I'm pretty sure he will.
Click to expand...
Click to collapse
lol i will agree with you on that one
goldenarmZ said:
Some of the european people in particular need the ability to flash international images to get root in the first place.
Click to expand...
Click to collapse
... and do tell how you can flash the SPL ***BEFORE*** you get root....
lbcoder said:
... and do tell how you can flash the SPL ***BEFORE*** you get root....
Click to expand...
Click to collapse
"......"
I'm sure I had a point there, but until I remember what it was, I'll just hang my head and walk away quietly.
goldenarmZ said:
"......"
I'm sure I had a point there, but until I remember what it was, I'll just hang my head and walk away quietly.
Click to expand...
Click to collapse
Your point was that the Hard SPL is required to flash images from another region and you are correct.
Joe333x said:
Your point was that the Hard SPL is required to flash images from another region and you are correct.
Click to expand...
Click to collapse
Get ready for more action! I sense lbcoder cooking something up...
Joe333x said:
Your point was that the Hard SPL is required to flash images from another region and you are correct.
Click to expand...
Click to collapse
..but I can't remember why that was useful. I thought I knew when I typed it but I don't anymore.. I blame this evil beverage in my hand.
grandomegabosses said:
Get ready for more action! I sense lbcoder cooking something up...
Click to expand...
Click to collapse
http://code.google.com/p/android-roms/wiki/SPL said:
HardSPL is a modification of the Engineering SPL by cmonex. In addition to the functionality of the Engineering SPL, HardSPL also allows NBH files to be used without matching the CID (carrier ID) check. At the current time the main benefit of this is to allow European G1s flash American NBH files and vice versa.
Click to expand...
Click to collapse
http://code.google.com/p/android-roms/wiki/SPL
goldenarmZ said:
..but I can't remember why that was useful. I thought I knew when I typed it but I don't anymore.. I blame this evil beverage in my hand.
Click to expand...
Click to collapse
You typed it be lbcoder said that there is no advantage to using the Hard SPL.
Firerat said:
yes.. its safe
OE 1.2.2 needs Danger SPL, ignore what the changelog says it's wrong
http://code.google.com/p/openeclair... Type Status Priority Owner Component Summary
Click to expand...
Click to collapse
lbcoder said:
Nope. It may be broken, but that is a very minor tweak to fix.
Click to expand...
Click to collapse
OP wants OE 1.2.2 , you need danger to flash, 'bugged' OE 1.2.2 means that danger is needed, OP downgrades, OP can't flash 1.2.2 therefore no point downgrading... No point downgrading fullstop... even if not 'broken' it would still flash over Danger.
tbh OE Devs/beta testers should have at least confirmed danger was not needed by downgrading and flashing.
Firerat said:
nope .. why would you want/need to downgrade it?
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong(old) radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
Click to expand...
Click to collapse
lbcoder said:
Protection from accidental bricking...
There is no telling if any FUTURE RADIO will be compatible with the DEATH SPL -- the only thing guaranteed is that future radio images will be compatible with the 0.95.x000 SPLs.
Click to expand...
Click to collapse
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
removed the old, is that better?
lbcoder said:
Note: I suggest NOT using the so-called HARDSPL. It really doesn't offer anything over the stock engineering spl 0.95.3000. Why use a hack when not needed?
Click to expand...
Click to collapse
errm, Hardspl lets you flash things you wouldn't normally be able to flash, that is why Hardspl is needed..
your comments were largely pointless, you don't score any points for not full quoting me
Firerat said:
you only need to downgrade the SPL if you are going to downgrade the radio
( wrong radio + Danger SPL = Brick )
you are only likely going to need to downgrade the radio to get back to stock
removed the old, is that better?
Click to expand...
Click to collapse
Don't forget that a radio flash can be included in ANY update.zip archive.
That includes the possibility of accidentally flashing a MALICIOUS system image designed to cause bricks.
And as I've said before, there is no guarantee AT ALL regarding what some future radio will be compatible with. Just because HTC has ***LATELY*** been releasing radio images compatible with both SPLs does NOT mean that this trend will continue in the FUTURE. The ONLY guarantee you have is that HTC WILL NOT release RADIO UPGRADES for DREAM that ARE NOT compatible with the STOCK 0.95.x000 SPLs.
errm, Hardspl lets you flash things you wouldn't normally be able to flash, that is why Hardspl is needed..
Click to expand...
Click to collapse
No... it doesn't.
It only lets you flash foreign NBH files.
If you have an engineering SPL, there is NO REASON AT ALL to flash NBH files!!!
In fact, if you have an engineering SPL, you SHOULD NEVER flash an NBH file because then you LOSE your ENGINEERING SPL as well as ROOT!!!!
your comments were largely pointless, you don't score any points for not full quoting me
Click to expand...
Click to collapse
Did I quote you enough this time?
lbcoder said:
Don't forget that a radio flash can be included in ANY update.zip archive.
That includes the possibility of accidentally flashing a MALICIOUS system image designed to cause bricks.
And as I've said before, there is no guarantee AT ALL regarding what some future radio will be compatible with. Just because HTC has ***LATELY*** been releasing radio images compatible with both SPLs does NOT mean that this trend will continue in the FUTURE. The ONLY guarantee you have is that HTC WILL NOT release RADIO UPGRADES for DREAM that ARE NOT compatible with the STOCK 0.95.x000 SPLs.
No... it doesn't.
It only lets you flash foreign NBH files.
If you have an engineering SPL, there is NO REASON AT ALL to flash NBH files!!!
In fact, if you have an engineering SPL, you SHOULD NEVER flash an NBH file because then you LOSE your ENGINEERING SPL as well as ROOT!!!!
Did I quote you enough this time?
Click to expand...
Click to collapse
Where on Earth would you be downloading malicious update.zips from? If you don't trust the source, you probably shouldn't try it. Also, you can open the zip and check for a radio image. And future radio images are not pushed to you anymore because you're on a custom rom. Why would you flash a random radio image you found here without other people trying it first?
Your arguments really do make sense. I'm not trying to say you don't have logical points. All I'm saying is if you use the brain, you probably won't brick your phone.
I have tried searching the forum but I cannot find a straight answer on upgrading SPLs. I currently have a rooted G1 running CM5.0.8 and I have the engineering spl HBoot - 1.33.2005. My question is that I have seen versions 1.33.2010, and I am wondering what the differences are between and if it would be better to upgrade my device, i.e are there any improvements in the newer spl versions? Thank you to anyone that can provide me an answer!
xanronin said:
I have tried searching the forum but I cannot find a straight answer on upgrading SPLs. I currently have a rooted G1 running CM5.0.8 and I have the engineering spl HBoot - 1.33.2005. My question is that I have seen versions 1.33.2010, and I am wondering what the differences are between and if it would be better to upgrade my device, i.e are there any improvements in the newer spl versions? Thank you to anyone that can provide me an answer!
Click to expand...
Click to collapse
No. There is nothing of benefit in 1.33.2010 for you.
There is no good reason to change the spl. magic users use 1.33.2009 and 1.33.2010, and nearly no dream users use them.
On the dream it will shrink data/system partitions (increasing cache) thus likely removing the functionality that made you installed danger for in the first place.
I have not seen a change in functionality if there is it's in an undocumented extended function I have not dirived a use for yet.
Both 1.33.2009 and 1.33.2010 also only support 2.x and 3.x radios like the danger spl. So its no safer to install on a dream than danger spl.
I have to go back to full stock for insurance purposes, it wont pick up any cell service. The dreaimg.nbh is a full img if i remeber correctly. That being recovery, system, RADIO, and spl, right. If thats the case i SHOULD be fine right? I not 100% sure about the spl being in it, so i wanted to make sure. Thanks!
If you're talking about the RC29 for TMo G1, then yeah that one has everything in it. When I downgraded I fastboot flashed the original SPL first in case something happened during the process. That way I could be fairly certain I wouldn't wind up with a hard brick.
Sent from my HTC Dream using XDA App
I do not know exactly, what dreaimg.nbh contains, but I boubt it will not contain a SPL, so flashing it may brick your phone. For security reasons I would first flash a SPL which is compatibe to a 1.x radio, i.e. stock-spl or 1.33.2003.
AndDiSa said:
I do not know exactly, what dreaimg.nbh contains, but I boubt it will not contain a SPL, so flashing it may brick your phone. For security reasons I would first flash a SPL which is compatibe to a 1.x radio, i.e. stock-spl or 1.33.2003.
Click to expand...
Click to collapse
It contains the following...
-Stock Radio
-Stock SPL .blahblah
-1.1 Android(RC29)
Dont worry, ive flashed the nbh 2+ times just for testing purposes while having the Haykuro/Danger SPL & 26I/new radio
Just flashed DREAIMG.nbh over a 2.22.23.02 radio and Haykuro SPL - everything went smooth as DREAIMG.nbh contains stock radio and SPL. You can downgrade without fear.
Sent from my T-Mobile G1 using XDA App