dreaimg.nbh+death spl= safe?... help, bout to flash - G1 Q&A, Help & Troubleshooting

I have to go back to full stock for insurance purposes, it wont pick up any cell service. The dreaimg.nbh is a full img if i remeber correctly. That being recovery, system, RADIO, and spl, right. If thats the case i SHOULD be fine right? I not 100% sure about the spl being in it, so i wanted to make sure. Thanks!

If you're talking about the RC29 for TMo G1, then yeah that one has everything in it. When I downgraded I fastboot flashed the original SPL first in case something happened during the process. That way I could be fairly certain I wouldn't wind up with a hard brick.
Sent from my HTC Dream using XDA App

I do not know exactly, what dreaimg.nbh contains, but I boubt it will not contain a SPL, so flashing it may brick your phone. For security reasons I would first flash a SPL which is compatibe to a 1.x radio, i.e. stock-spl or 1.33.2003.

AndDiSa said:
I do not know exactly, what dreaimg.nbh contains, but I boubt it will not contain a SPL, so flashing it may brick your phone. For security reasons I would first flash a SPL which is compatibe to a 1.x radio, i.e. stock-spl or 1.33.2003.
Click to expand...
Click to collapse
It contains the following...
-Stock Radio
-Stock SPL .blahblah
-1.1 Android(RC29)
Dont worry, ive flashed the nbh 2+ times just for testing purposes while having the Haykuro/Danger SPL & 26I/new radio

Just flashed DREAIMG.nbh over a 2.22.23.02 radio and Haykuro SPL - everything went smooth as DREAIMG.nbh contains stock radio and SPL. You can downgrade without fear.
Sent from my T-Mobile G1 using XDA App

Related

[Q] Can't Install New SPL

Hi all,
I really wanted to try out the latest Hero build. So I began the procedure, first by flashing the radio, then the SPL. The radio update went fine. I also installed the new SPL (no errors whatsoever), but when I checked to see whether I had the correct version, it displayed HSPL10.95.3000 (I had installed a HardSPL before). I reapplied Haykuro's SPL update, and still no change. How can I remove the HardSPL, and is it okay to continue the Hero install with my version? I don't want to brick my phone (obviously) and I'm quite a newbie.
You cannot "remove" the SPL. it can only be overwritten by the Haykuro SPL. I suggest re-downloading the Haykuro SPL and flashing it again. Do not flash a hero rom with the SPL that you currently have.
Thanks for the reply. I tried overwriting it again with Haykuro's SPL, but it didn't work. On this website, I found that
The second type of HardSPL is truly HARD...They bypass the vendor checks on ROMs, allowing you to load any ROM onto your device. This is a necessity if you want to run a cooked ROM. They disable overwrite of the current SPL. This is why I say they are truly HARD. So, even if your ROM comes with a new SPL, it won't overwrite your HardSPL.
Click to expand...
Click to collapse
So, is there a way to remove HardSPL? I've been looking for info on this for hours and found nothing.
peshkata said:
Thanks for the reply. I tried overwriting it again with Haykuro's SPL, but it didn't work. On this website, I found that
So, is there a way to remove HardSPL? I've been looking for info on this for hours and found nothing.
Click to expand...
Click to collapse
Well if you remove HardSPL what SPL will you have for that like 5 minutes or so? Try flashing to Engineering SPL first and then flash Haykuro's Special SPL
Try flashing to Engineering SPL first and then flash Haykuro's Special SPL
Click to expand...
Click to collapse
Tried it, worked great. Thanks!
Glad it worked peshkata! Could you (or a mod) please edit the title so it stated SOLVED so people know? Thanks!

SPL ??

how do you find out what spl you have ?
can someone breifly explain to me what SPL is
and i right in thinking SPL is what can make a brick ?
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Downgrade to Hard SPL from Danger SPL??
AdrianK said:
hold camera and power to boot in to the SPL (when the phone is off) and it will tell you. A rainbow screen means it's stock.
The SPLs other than stock allow you to use fastboot to flash things like splash images and restore nandroid backups. Haykuro's SPL (aka "Danger SPL") allows you to run HTC based ROMs like Hero and Rogers. Make sure you have the cupcake/1.5 radio (which you should already have) before flashing, otherwise it will brick.
Click to expand...
Click to collapse
When I rooted my phone I installed Haykuro's danger spl with the latest radio. I didn't know it can potentially brick your phone (hence the danger part lol). I'm running cyanogen 4.0.1 and it's working just fine so far but I had 3 questions
1) Is Hykuro's Danger SPL only risky during the installation process or can it still possibly brick your phone after a successful installation (in other words, elaborate on the "danger" part please)
2) Can I downgrade to Hard SPL after installing the Danger SPL
3) How would I downgrade to Hard SPL?
Thanks guys!!!
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
rondey- said:
If you are using Haykuro's spl there is no need to downgrade, it will allow you to run anything the hard spl will and more. The only "danger" with haykuros spl is when you flash it, if you successfully flashed it then you have nothing to worry about.
Click to expand...
Click to collapse
AdrianK said:
Rodey is correct, that H's SPL does everything hardSPL does (fastboot ect) and sloows you to run HTC Based ROMs. I don't know why you would want to downgrade but if you do it should be as simple as flashing the hardSPL update.zip. Get a secind opinion on that though if you want to try it, I'm no hardSPL expert.
You will only brick your phone with haykuro's SPL if you dont have a PVT board (camer+power to boot in to SPL, it will tell you) and if you dont have to 1.5 radio. To check either in the SPL or Settings > about phone check the baseband is version 2.22.19.26 (if you go to about phone there will be some crap before the number, ignore it).
IMO H's SPL is just handy to have. As long as you have the new radio and a PVT board nothing *touch wood* should go wrong.
One more thing, when flashing the SPL, don't play hot potato with your phone ;-)
Click to expand...
Click to collapse
Thank you guys! In that case I'll just keep H's SPL seeing that I already installed it successfully without bricking my phone (yay)
Really appreciate both of your time!
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Unless you are Unrooting and flash the original spl. I've done this many times so I know it works.
Does SPL: 1.33.2005 help the regular ROMS run better (Cyanogen's)?
I use dxTop, seems to run out of memory quickly.
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
Thanks for the warning!
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
sasa3791 said:
i've installed CM 4.0.1 and Recovery 1.4 (wit Recovery Flasher), but without Hard SPL and OTA Radio, after that installed Dark Hero Theme and all works ok.
can some1 tell me do i need reinstall everthyng and install hard spl and ota radio, and how can i do that?
thx
Click to expand...
Click to collapse
If you didn't downgrade to RC29/7 then you should have the 1.5 radio. Check by going to Settings > About Phone and baseband version. It should be 2.22.19.26I.
I think you can just flash HardSPL as update.zip as you are, but I' not completely sure...
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I swear I've heard people say they have, but dowgrading the radio after installing Danger SPL did cause bricks...
I'll go check
You WILL brick your phone if you attempt to downgrade your radio after flashing the new SPL or if you do not have the latest radio installed before flashing the new SPL
Click to expand...
Click to collapse
Hmm can't find anyone that said they did :-(
FYI
FYI
@Adrian K and nephron
When I unrooted my spare G1, I got it completely back to stock (circa October original shipment stock)
I downgraded my SPL successfully from the danger SPL all the way back to the original SPL. Also when I downgraded back DREAIMG.nbh, I confirmed at the time that the radio downgraded with it. My original post was on the unlockr.com when I was trying to help David of unlockr.com with some tutorials.
My original quote from unlockr
BTW: I have confirmed via the bootloader that the radio DOWNGRADES back to stock by applying the DREAIMG.nbh update FYI
From the bootloader I am now at
DREA100 PVT 32B
HBOOT-0.95.0000
CPLD-4
RADIO-1.22.12.29
Sep 2 2008
Click to expand...
Click to collapse
nephron said:
You cant downgrade SPL's!!!!!!
IT HAS PROVEN TO BRICK YOUR PHONE!!!! DO NOT DOWNGRADE FROM DANGER SPL!
Click to expand...
Click to collapse
I think it's downgrading the Radio, while on Danger SPL that will brick your phone b.
I have also gone from Hard to Danger back to Hard again with no issues.
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
polarbearmc said:
if i use the 1click root method and then install cyanogens 4.0.1... do i actually need to do the hardspl and the radio or is that all taken care of? that's the only thing that's confusing me a little bit...
Click to expand...
Click to collapse
If you are talking about the one click method that is know on the market as recovery flasher, that only takes care of granting root access and flashing cyanogen's recovery image. The radio and spl upgrades are on you.
Try here for more explanation
http://forum.xda-developers.com/showthread.php?t=550050
yea that's what i'm talking about... now don't get me wrong, i believe you guys here on xda first and foremost... but theres a video tutorial on android and me, and it doesn't show them installing the radio and spl between using the recovery flasher and then installing cyanogens 4.0.1... are they not doing it right in the video or are the radio and spl optional? all the guides on here seem to say you do have to flash them but the video clearly shows them not stopping to do it. so maybe their video just sucks haha. but any idea on that?
thanks so much
I have 1 click rooted and installed Cyanogen 4.01, I am on CRC1, my understanding was as I was already on 1.5 Cupcake, my current SPL and Radio were current.
I read somewhere that the 1 click method is only temporary root. But if someone could elaborate on this it would be very helpful. Also what is this hard spl ?

Downgrade radio

Hi,
I seem to have some issues delievering SMS under the new radio (I assume it to be the cause).
I'm currently using both SPL and Radio from Haykuro (that I flashed in order to try on Hero roms), but, having the above in account, I'd like to return to stock radio (version 1.smth).
So, taking teh brick factor into account I was considering doing the following:
1) Flash DangerSPL
2) Flash Stock Radio
Is the procedure safe/correct/in correct order?
Where can I get the stock radio?
DO NOT flash the danger spl and downgrade radio, youll brick for sure. Id just try a reflash of the radio, rom or both first.
Download the older radios at getyourdroidon.com

How to tell what spl you have

I rooted my phone so long ago just following JFs instructions I cant remember what spl I installed and now with the need for the Danger SPL or Eng SPL to run the new eclair roms I wanted to know what I am running I booted into the spl and it says HSPL10.95.3000 so I am pretty sure that I am using the Hard spl, is that correct ? Does this mean I can not use the new eclair roms with installing a new spl ?
If you booted into fastboot and it said HSPL10.95.3000, then yes, you are running the Hard SPL, and yes, you need to install the new SPL before flashing any Eclair ROMs.
Joe333x said:
I rooted my phone so long ago just following JFs instructions I cant remember what spl I installed and now with the need for the Danger SPL or Eng SPL to run the new eclair roms I wanted to know what I am running I booted into the spl and it says HSPL10.95.3000 so I am pretty sure that I am using the Hard spl, is that correct ? Does this mean I can not use the new eclair roms with installing a new spl ?
Click to expand...
Click to collapse
All you do is press
Camer+power then look next to Hboot.
tardie said:
If you booted into fastboot and it said HSPL10.95.3000, then yes, you are running the Hard SPL, and yes, you need to install the new SPL before flashing any Eclair ROMs.
Click to expand...
Click to collapse
thanks, man I just l wanted to double check. Do you think that eclair roms will always require a danger spl or eng spl? I just dont want to bother changin before the eclair roms are even stable enough to flash for regular every day use.
Joe333x said:
thanks, man I just l wanted to double check. Do you think that eclair roms will always require a danger spl or eng spl? I just dont want to bother changin before the eclair roms are even stable enough to flash for regular every day use.
Click to expand...
Click to collapse
1.They need Haykuro SPl
2.Didnt you hear the news?
Tmo will give the Mytouch/G1 up to 2.6 updates.This was said by tmo and some devs on twitter.
Ace42 said:
1.They need Haykuro SPl
2.Didnt you hear the news?
Tmo will give the Mytouch/G1 up to 2.6 updates.This was said by tmo and some devs on twitter.
Click to expand...
Click to collapse
according to one ROM thread I read the creator of the ROM said you must have Danger or Engineering SPL. I have heard of people bricking there phones using Haykuro SPL. Thats great news though, I had thought they were stopping G1 updates after 1.6

Question about re-flashing 2.22.19.26I radio and Haykuro's DangerSPL

I have the latest 2.22.19.26I radio and Haykuro's DangerSPL.
I want to re-flash both of these.
1) Is it safe to flash the radio and then the SPL?
2) If I decide to go back to HardSPL, will it be safe to just flash the HardSPL while the 2.22.19.26I radio is already installed?
I want to make sure my Android won't turn into a doorstop
PSP_Hacker said:
I have the latest 2.22.19.26I radio and Haykuro's DangerSPL.
I want to re-flash both of these.
1) Is it safe to flash the radio and then the SPL?
2) If I decide to go back to HardSPL, will it be safe to just flash the HardSPL while the 2.22.19.26I radio is already installed?
I want to make sure my Android won't turn into a doorstop
Click to expand...
Click to collapse
why don't you want the haykuro spl?
Ok, maybe I won't go back to the HardSPL. All Hero ROMs require Haykuro's SPL and even some AOSP ROMs like SuperD need it too.
I just want to know if my phone will brick or not, because I've done simple stuff like this before but ended up with more problems (even bricks) because no one cared to mention there was a danger.
@hiddengopher
lol at your signature xD
so can anyone answer this i was wondering if you could go back to hardspl too?
You phone will be fine... and .26I is not a latest radio.

Categories

Resources