Hello,
I installed Diamond CDMA Windows 6.5 ROM on my Diamond. Now it won't boot, but hangs on the "Touch Diamond" screen. How do I flash it with a new ROM without putting the device into Active Sync mode?
Solved.
I entered the boot screen by pressing volume down and the power button simultaneously. Then I was able to install a new ROM.
Related
i upgrade my QTEK9100(g4) using a clean wm6 rom ,it shows succeeded,but push poweron button,it simply stop at the HTC logo ,and more, with all known way tried,i can't enter into the tri-color screen any more,PLS HELP!
Hi
my Charmer freezes during the Bootprocedure (IPL SPL GSM OS is showing)
I tried to upgrade to Charmer WM 6.1 by ChrBeck but when the os file is written the connection cuts :-(
what should I do ??
Anywhen I used a safe mode but i don't know how to get there.
Does someone know how ???
Thanks for help
OK i figured i out just press the Camera Button after you pressed the reset button
I just flashed my HTC touch diamond with ROM: EnergyROM_28011_DIAMOND_24.Dec.2009_Standard_Sense2.1
And it won't boot into WM, when I turn it on it says "Touch Diamond" in white letters with black background for about 20 seconds or so then it vibrates and repeats the same thing again. I have no idea what to do.. I have flashed my HTC about 10 times and this has never happened. I can't access it at all.. my computer will not recognize the device and the RUU can't connect to it either so I can't reflash it........... any ideas? Any help is MUCH appreciated
Hard Reset !!
You should go into bootloader mode to flash another rom (vol down + power on).
If its not solved by hard resetting/reflashing you should MTTY.
Hard reset with MTTY and reflash!
I installed a Rom ( 23,506 Rom Calkulin's Diamond ROM v4.2 ) and phone froze .... click on the Power button on and remain frozen and the display shows the Touch Diamond and not wake-up is frozen .Hellp me pleaseeee !!!
Sounds like you had a bad flash.
Have you tried removing battery, reinserting it, holding down "VOLUMEDOWN" key, and pressing power? You would enter into a tricolor screen. Try flashing a different ROM from there.
If that doesn't work, try flashing the official ROM for your device from HTC's website.
~codeslicer
use mtty....it solves all the problem
you can find it here http://forum.xda-developers.com/showthread.php?t=540290
hi,
I have htc G1 mobile with had android software.
It is stuck on G1 logo when i start it. I have flashed the software from mobile.
I have downloaded the new software from web into the SD card but now I am pressing Home + power button to start the mobile in config mode to run new software update.zip file but its not working.
Summary : power + home buttom is not working to boot the mobile.
what to do.
Thanks,
Khurram Sarwar
Hey.
Have you tried accessing fastboot mode (power+camera)? I had that problem just a few days ago.. to be honest I don't know what caused it or what the fastboot has anything to do with this.. but when i entered fastboot and then reboot the phone from the menu, it started working again.
Maybe you can try that and see if it works for you as well?
Hi,
Thnaks for your reply. I have tried Power + camera buuton but still ITS NOT Working.
Anyother workaround.
Thanks,
Khurram
If camera+power, home+power, back+power does not work and it's looping on G1 splash screen. You have a brick. The only way to fix that is jtag.