Noob need help - G1 Q&A, Help & Troubleshooting

Hi everybody !
I had my Htc Dream since 2 days.
So i want to change the original Firmware,
I had read a lot of tread, but i don't understand evrything...
Someone can explain me how to Rooted G1, install a new Fw, ...
Because i have try some thinks but without sucess...
Version 1.1
Version de bande de base : 62.41s.20.13u.2.22.16.19
Version du noyau : 2.6.25-b062f65f [email protected] #18
Numéro de version : 1.58.73.2 PLAT-1.0_gms-144337 CL#20416 release-keys
(I'm on Windows 7..)
(Sorry for my english. I'm frensh, and it's maybe for that who i don't understand everything :$)
Thank You!
Have a nice day.

hi, boot with power+back and show the info here for us to help you thanks =)

Well if you're talking about the rc29/rc27 you can go check out cyanogen's wiki at http://wiki.cyanogenmod.com/index.php/Full_Update_Guide_-_G1/Dream_Firmware_to_CyanogenMod . I only hope that's what your meaning to gain root to your G1. If you need help just let me know.

You may have root access already.
To check
1) Grab the telnet application from the
2) Press home to go to the home screen
3) press the enter/return key twice
4) type telnetd
5) Press enter/return key twice again
6) open telnet
7) connect to local host port 21 and see if it will allow you to login.
If so you have root, either wise you'll need to look in to dowgrading or flashrec methods.

Thanks for your answers !!
I had find some thing!
http://wiki.smartphonefrance.info/firmware-htcdream.ashx
(Sorry, but it's in french...)
So if i have understand for "Orange" my operator, it's differente.
I need to us "SDK Android" for windows (Doesn't work with windows 7 ...)
After apply one or two patchs
And finaly install Fw.
I had try to upgrate my ratio and my SPL too, but i don't know why, my phone don't want to install new ratio ...
It will make me crazzzzy
Thank You for your Help !

ramses02 said:
I need to us "SDK Android" for windows (Doesn't work with windows 7 ...)
Click to expand...
Click to collapse
Yes, it does.

you can use the 1 click root. search for "flashrec.apk"

What ?! there is on application who can do evrything ?!
"flashrec.apk" Where can i found it ?
It will work for my and my "orange" Firmware ?
(I had saw the youtube video aboute flashrec.apk, but i've a probleme, i can't explor my Sd carte, or my phone. there is not application for that in my phone )
Thank you !!!

Up up up
Thanks for your futur help!

Please Heeeeelp me :$

Related

Help please stuck in bootloader

After a good update of udK 8.0 R2 Vega on my Tynt II, I try to update the radio too, unfortunatelly at 99% this crash !!!
Now my device is always in Bootloader mode, I don't know how to exit from it, I tried to reinstall udK 8.0 R2 Vega but the updater say ERROR:
Please what to do to exit from bootloader mode ?
Giuseppe
uniprof said:
After a good update of udK 8.0 R2 Vega on my Tynt II, I try to update the radio too, unfortunatelly at 99% this crash !!!
Now my device is always in Bootloader mode, I don't know how to exit from it, I tried to reinstall udK 8.0 R2 Vega but the updater say ERROR:
Please what to do to exit from bootloader mode ?
Giuseppe
Click to expand...
Click to collapse
Here download attached file. Then run it and type in readconfig and record the results here. Or you can just try typing in boot
let me know if this helps hopefully it does.
I followed your instruction and used your program, after hard reset there is again bootloader mode, I tried to reinstall udK 8.0 R2 Vega but stop on 0%.
Help me !!
Giuseppe
uniprof said:
I followed your instruction and used your program, after hard reset there is again bootloader mode, I tried to reinstall udK 8.0 R2 Vega but stop on 0%.
Help me !!
Giuseppe
Click to expand...
Click to collapse
ok once you type boot, what happens?
follow these steps then:
1. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
2. put your device into the cradle
3. Run mtty and Choose WCEUSBSH001 in 'PORT' (if it doesn't show then you didn't stop all active sync processes above!)
4. type "set 16 0" without the quotes to tell bootloader to boot the OS after reset. (for some devices it can also be "set 14 0")
5. type "task 8" to get your device formatted
6. type "task 0" to ask your device reboot
7. take the device out of the cradle, and manually reset it if it does not do that already.
i hope you have hardspl installed otherwise you can brick your device and thats not a pretty thing.
Thank youuuuuuu !!!!!
I was able to reset the device, all ok now.
But if I try to reinstall again the radio update, it stop at 99% and say update errror.
Then I have to re-follow your instruction.
How can I successly install the radio update ??
Giuseppe
uniprof said:
Thank youuuuuuu !!!!!
I was able to reset the device, all ok now.
But if I try to reinstall again the radio update, it stop at 99% and say update errror.
Then I have to re-follow your instruction.
How can I successly install the radio update ??
Giuseppe
Click to expand...
Click to collapse
do you have hardspl installed?
hehehhee noooo , I install it now, I will let you know.
uniprof said:
hehehhee noooo , I install it now, I will let you know.
Click to expand...
Click to collapse
haha you are lucky you did not ruin your device. Hopefully everything runs smoothly from here. Let me know if I can help you further.
redbandana said:
do you have hardspl installed?
Click to expand...
Click to collapse
You are the best, no body help me before like you.
Thank you.
uniprof said:
You are the best, no body help me before like you.
Thank you.
Click to expand...
Click to collapse
You're welcome and I am glad everything turned out well for you.
Hi Morning, do you know wich is the best ROM arround ?
uniprof said:
Hi Morning, do you know wich is the best ROM arround ?
Click to expand...
Click to collapse
I will tell you if you tell me the best car around.
The best woman around.
The best city in the world to live...
Be aware - these actually have to be the BEST in their category - not just YOUR opinion.
Get the idea? You are gonna have to read and flash for yourself to see what YOU actually think.
Bill

T-MOBILE MDA III - Qtek 9090 please help (I from CZECH REPUBLIC)

Hi I from CZ and I have problem with my MDA III
what can I do ? please
"bootloader doesn't work and master reset too doesn't work" please help i dont know how to flash i was read much tutorials there but I not found a right tutorial please help me I dont know what i can do I form CZ and my mail is [email protected] ( kdyby nekdo z CR na to narazil tak mi prosim napiste a domluvime se na icq treba klidne kdybych to rozjel tak poslu i nejake penize nebo tak akorat mi prosim napiste co nejdriv ve stredu jdu jinak do servisu ale tam to bude stat hodne ) (this is PH20B
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Chef_Tony said:
actually, depending on your screenshot, your device is exactly ready to flash, you just gotta put it in the cradle ad start flashing it with whatever rom you want. because what you see there is the bootloader:
How to enter into the so-called Bootlader mode on the HTC Blue Angel devices
Note: entering Bootloader mode will result a Hard Reset if you have WM2003SE on your device!
1. Press Power + record (above the volume slider) + softreset at the same time.
2. You should see a white screen with "Serial" text on it and the Bootloader version.
3. Put your device into the cradle
4. Make sure that the charger of your PDA is connected to the cradle.
5. The text should change to "USB" now.
what i want to say is, start flashing following the WIKI Wizard or several step by step guides to be found in the wiki and the forum
Click to expand...
Click to collapse
I want go to bootloader menu but is dont work I press Power +record+softt reset with stylus but it doesnot work and when I conect MDA with cabel to COM this cable in not USB and active sync not found MDA and when I start update with exe it write me not found (sorry for my english) help me please ? can you write me more detailed tutorial what can I do for flash please what I must download and what I must do anywhere dont work download and i dont know where I can download any files
EDIT : Flashing is not compatible with serial cable ? I have this cable
Code:
http://www.i-obchod.cz/product.asp?productid=6663
this is to serial port (COM) when i buy this
Code:
http://www.easydevices.co.uk/pp/PDA_Accessories/Cradles/QTEK_9090_USB_SYNC_CRADLE.html
work it with this ? or it better when I go to service and pay 800kč this is about 25 Euro or 40 dollars and when I place an order this cradle i pay for this 18£ this is about 600kč and about 7days when it send me to home and I go to service tomorow but if I Flash it I not having to go to service
hi guys!
my ba also displays this strange message after an unsuccessed update (disconnected before finished). i have tried to install the update once more but it says: error 101: connection error. because i own my ba just since 20 hours, i don't know what to do now. so maybe someone could translate it into newbie-language. one more thing: unfortunately i use vista.
thanks for your help!
tried it once more with the new windows mobile device manager but my pc does not find my ba. vista just plays a sound when i put it on the cradle. i think you are the only ones in the hole www who can help me. need your help!
use maupgradeut_noid for upgrade
both of you read wiki there are solutions to your problems
maupgradeut_noid tells me this:
don't think that it is right.
hi folks!
i have tried it a hundred times with my vista mashine and a couple of times with xp on virtualbox but nothing. 15 minutes ago i have turned on my old xp mashine, downloaded the ROM from tmobile germany and started the application. it worked for me without maupgradeut_noid. only the original rom and nothing else. so my tip: don't waste your time with vista! xp is much better for solving this problem. thanks xp!
ok, but as i see it you didn't solve a problem but avoided it, and not even in the best way. i use vista too and i am unable to re-flash my device. the general problem is that the identifier of the device change over the flashing process, so vista downloads new drivers and cuts the connection. as i understand it, there is hardly any way to avoid that.
of course you do't need to use maupgrade_noid for an original rom, the _noid file is, as implied by the name, to avoide the device from identifying, so you could flash a WWE Rom to a rather locked german device.
as you might have realised, the picture you posted shows the magician and not the blueangel, hence the name Maupgrade instead of Baupgrade, which again is solved by the _noid version of the file and putting the device to bootloader first.
that the window does not show the versions from what version you flash to what version exactlyu doesn't matter at all. but as mentioned before, you should use an xp machine which will work like a charm!
am i to understand, that you have the latest official t-mobile rom on? the wm2003se?
as fast and battery friendly that might be, it is so out-dated and practically no newer third party software will be supported, like the fantastic application SPB Online, and the interface is incredibly ugly. if you ever want to try and flash your device again, try my tips above and it will work out just fine, as you seem to have mixed up a few things, but never mind.
i wish you best luck for trying again and will stand by for support, whether something might still not work out as planned.
good luck
Chef_Tony
well if you upgrade under vista take a look here
also look here for MAUpgradeUT_NOID and proper files - it is on the bottom of the page, so you only need the nbf files

Hspl error check THE picS

HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
Might have been more help asking in the hspl thread but nevermind . Try a different cable (most mini usb cables will do)
SYRIAN4E said:
HELLO
i'm going crzay from the hspl
the auto flash dosn't work
and the manual flash file when i run it the device is lag
so i get into the bootloader by pressing volum down and power then realese
and i start the manul flahs then here is the 7 pictures i put it in zip file cu they more than 4 file
hope we fix the proplem
plz
plz
plz
help
Click to expand...
Click to collapse
no need to go crazy, this can be fixed.
you shouldn't enter the bootloader yourself, it won't flash that way.
what error did it say in automatic mode?
syrian
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
SYRIAN4E said:
tha messeage talk about turning off my firewall
and the server is off
and this is my first hspl
Click to expand...
Click to collapse
ok did you turn firewall off? turn proxy off too, if you have a proxy.
if that doesn't sort it, I can still help you if you message us via this link: http://support.htc-unlocks.com/
syrian
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
SYRIAN4E said:
i change the usb and disable the proxy and turn off all my firewall and antivirus
i think the proplem from something lagging from the hspl software
cuz i enter the bootloader and i start manual flash and it's respond and show to me the update button and i press it and tell my software version and if i wanna change to oilnex version and i press it and show to me the percentage image on the pc and in the phone then i wait then nothing happend
Click to expand...
Click to collapse
you shouldn't enter the bootloader like that, the flash won't work that way.
I replied to your priv. message
syrian
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
SYRIAN4E said:
is there any hope CHECK THE PICTURE
1st - the cable is work well cuz i update the device with it from the offical htc website
2nd- the picx
3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK
4TH- I START THE manual FLASH
2nd- more INFO
RED LINE : TOPA100 32M
SPL-2.51.0000
MicroP-Topaz (LED) V10
TURBO HW/TURBO SW
GREEN LINE : TP MFG DATA
502,547 170,876
173,200 834,210
828,869 Calibrated
BLUE LINE : E M P T Y
WHITE LINE : U S B
Click to expand...
Click to collapse
the screenshots are very helpful in seeing what your problem is.
ok, after 3rd step now try copying Manual SSPL exe (link: http://forum.xda-developers.com/attachment.php?attachmentid=232407&d=1254155476) on the phone, run it, it should then show SSPL screen on the phone. then use the Manual flash mode on the PC. let me know if it works that way
syrian
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
SYRIAN4E said:
the device get LAG when i launch the manual sspl and i start manual flash even whene it's lag
and here is the picture
Click to expand...
Click to collapse
what do you see on the phone screen at this point?
syrian
nothing just the file maneger when i launch the manual sspl cuz the device lag
SYRIAN4E said:
nothing just the file maneger when i launch the manual sspl cuz the device lag
Click to expand...
Click to collapse
ok you did step "3rd- i run the EXE in the device and it SHOW TO ME THIS MESSAGE : Lic OK"
and then you run the manual sspl EXE on the phone, it still lags ?
I'm asking to make sure you did not do a hard reset or anything (I mean, don't do hard reset)
syrian
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
SYRIAN4E said:
i just did it in ever way that you can imagine
and i think that the manual is the proplem i'm sure
is ther any hspl type haha we can use
Click to expand...
Click to collapse
ok one last check.. send me a screenshot of your phone showing the IMEI to make sure it's OK.
but do not post the screenshot publicly, send it in private message.
syrian
come on xda help me lol
SYRIAN4E said:
come on xda help me lol
Click to expand...
Click to collapse
alright I realized that the second file was the wrong version. I sent you the correct file in PM, let me know if it worked
syrian
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
SYRIAN4E said:
OMG it's WOrk good
thanks a LOT for you
i own you
LOT
LOOK how much time it take to fix this proplem LOL
now i have another proplem and it is if you won't
is how to download the duty or energy rom cuz they are upload on HOTFILE and RAPIDSHARE LOL
and i thanks for the second time and love to know what was the prolem
SYRIAN4E
Click to expand...
Click to collapse
glad to help. as I said, the manual SSPL in the thread was the wrong version. I forgot to update it at one point, will add it in the thread now. (most people can just go and use automatic mode so nobody noticed there was an issue with the file.)
Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4 .49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

[Q] XPeria HardSPL 0.72Olinex not found image

Dear all,
Please help me,. i'm write this with tears in my eyes...hiks hiks
i had problem, my xperia already HardSPL 0.72 olinex then i want to change my window mobile to android os.
i was downloaded needed file to change it. After run KovskyAdvancedRUU.exe and choose Perform Task 29 only and also copy file to SDcard
file copy : gapps-gb-20110828-signed.zip, KOVSIMG.NBH, kovsky_signed_111911_080920.zip
Stuck in SE logo coz there's no os (deleted after perfom task 29 right?) when i enter the bootloader SPL 0.72olinex but always say "load image not found"
Please help me how to undo this
Note:sorry for my english
JFR
If you want to go back to WinMo read this
But If you want Android, you must flash the LKloader.nbh or pooploader, it has 2 different names but it is the same, you can flash it via KovskyAdvancedRUU.exe while phone is in bootloader mode (3colorscreen, that is descripted in the post linked above) or via SD Methode.
Then you should follow this manual There is also a Video showing what to do.
Dear Simyo
You are my savior after all...........
Thanks a lot, there's nothing word can express my thanks for u.....
My xperia now is back to original winmo........
now i'll follow u'r instruction above which how to change to andorid os..
Once more thanks a lot bro...
Thanks,
jefree7
jefree7 said:
Dear Simyo
You are my savior after all...........
Thanks a lot, there's nothing word can express my thanks for u.....
My xperia now is back to original winmo........
now i'll follow u'r instruction above which how to change to andorid os..
Once more thanks a lot bro...
Thanks,
jefree7
Click to expand...
Click to collapse
My username is not Simyo - Its my provider, but I know that you mean me^^
I'm glad that I could help you

[q] htc dream orange fr, plz i need help

HELLO EVRY BODY,
PLZ HELP ME TO FIND AN ORIGINAL ROM FOR HTC DREAM ORANGE, because I tried to root it and I changed the ROM to HTC DREAM G1, but i couldn't root it because the problem of recovery area, after i used telnet, when i tried to logon to recovery mode it can not logon, I don't Know why, so I want to restore my Original ROM HTC DREAM ORANGE FR
PLZ HELP ME
http://rapidshare.com/files/422717980/orange-1.58.73.2.nbh
Here's one
You'll need to flash from bootloader but I don't think you can with yours
Just try the telnet thing again...
Thank you freind,
i find a rom and update for it in english, no problem, ....
look plz here:
http://forum.xda-developers.com/showthread.php?t=1098899
but i have problem
the application FLASHREC, can't be installed i don't know why
can you plz help me to root it,
NOW the phone is working well but i want to root it to transfer application to SDCARD
THANK YOU again freind
start by telling us your radio/spl
power phone on while holding the camera button
write down everything that appears on this screen
amerzeggari said:
Thank you freind,
i find a rom and update for it in english, no problem, ....
look plz here:
http://forum.xda-developers.com/showthread.php?t=1098899
but i have problem
the application FLASHREC, can't be installed i don't know why
can you plz help me to root it,
NOW the phone is working well but i want to root it to transfer application to SDCARD
THANK YOU again freind
Click to expand...
Click to collapse
http://wiki.cyanogenmod.com/wiki/HTC_Dream:_Rooting
^This guide should be better
don't need flashrec or anything
Be warned though that it does wipe everything
demkantor said:
start by telling us your radio/spl
power phone on while holding the camera button
write down everything that appears on this screen
Click to expand...
Click to collapse
i'm sorry to be late
here is what is it written in my phone now:
Modele Number: T-Mobile G1
Firmeware Version: 1.5
Baseband Version: 62.505.20.17H-2.22.19.26I
KERNEL VERSION: 2.6.27-00393-g6607056 [email protected] #1
Build Number: CRB43

Categories

Resources