Anybody having an issue with inability to obtain IP address after connecting through USB to host.
I upgraded device to WM6 and now it can not get IP address from DHCP server.
Search and you shall find......
http://forum.xda-developers.com/showthread.php?t=270384&highlight=activesync+server+address
There are 2 solutions, however to return the default configuration follow my reply (last post in the thread).
Andy
Hi all,
No luck at all with the WM5 and syncing. There seems to be an issue with Virtual PC and the DNS connection, though none of the fixes work. The instructions on microsoft's page are written by microsoft (ie useless).
I've switched the phone back and forth between "server-assigned IP address" (which never works even though it displays an address), and "Use specific IP address" which also doesn't work.
On the PC (running XP), I get an "Error 10 - device won't start" error in the Add new Hardware troubleshooter.
In the Network connection troubleshooter, it says it cannot detect the DNS server.
I don't know if the wireless is interfering. I've spent a week on it and it still won't work.
Please help.
Paul D
Update
It seems the DNS problem is now solved - the virtual PC can connect to the internet.
Now all I need is for the phone to install. I keep getting install errors (#10 - the device won't start).
Any ideas?
PauL D
I'm having a bit of an issue with pptp on the Kaiser. The handset is provided by Vodafone so it's branded a v1615, I've not flashed it with anything yet.
I can create and establish a pptp connection via 3g to my server successfully, however as soon as I either go to messaging (setup for imap to the server's internal IP) or PIE to access OWA the pptp connection just drops.
Anyone any ideas?!
Bit of an update - in Messaging the network to use was wap which had an incorrect access point set. I changed it to work, set the access point to internet (I'm on Voda UK), username & password of web.
Then I created the pptp connection under VPN for this (the work) connection.
Now in messaging when I hit send/receive it dials the 3G connection, succeeds, then establishes the pptp connection successfully. And stays connected.
Only, still no mail - it reports back unable to retrieve new messages or contact server.
On the server, it shows there is a ras client and gives it's IP (obtained by dhcp).
I can't ping it (the kaiser) through the vpn.
I can't get imap to work through the vpn from the kaiser to my server.
I can't get RDP to work through the vpn
I can't get PIE to access OWA when addressing the internal IP of the server through the vpn.
I know these services work via this same pptp connection from another windows box. It's almost like it's not routing traffic down the tunnel. Vodafone don't seem to be blocking it as it is establishing a connection. Anyone any ideas??
This is more than frustrating. PPTP connection establishes fine, RRAS reports back an IP address for the logged on client.
I've tried using vxutil on the device (http://www.cam.com/vxutil_pers.html) - when the tunnel is reported as up, it is unable to pass any traffic through the vpn it seems, no tcp, udp or icmp. Nothing.
I have tried adding the server ip address under exceptions, also *.*, but no difference.
I ran Ethereal/Wireshark on the server, not one packet even reaches the server, this pptp connection is useless and somewhat of a let down.
I guess nobody else uses pptp at all? I would have thought I had a fairly standard setup with a W2k3 box nat'd behind a 3com router/firewall.
PPTP works fine on any other device apart from this..
Just so share my experisnce with VPN. I have configured PPTP using the WM6 VPN client and I am able to establish connection on my Kaiser(stock rom).
The connection works fine in PIE when I use it to access one of my servers via HTTP. In fact, I just need to point PIE to the URL of my server(internal IP. I have to set the IP in the hosts file in the registry) and it will automatically dial into my VPN.
For RDP, I am also able to login to my server but strangely the connection will automatically drop after 3 mins or so. I am also unable to get the RDP client to automatically use VPN. I have to manually establish the VPN connection myself.
You may want to try some other VPN clients and not the WM6 VPN client. I have read some threads in the past in this forum regarding other VPN clients that work on WM6.
That's why I've never had an Windows Mobile device before.
Symbian, iPhone, everthing works fine with my WLAN. WPA Key and go go go
My Kaiser has a WLAN connection but the IE wont' show any page. Why?
First thing is to isolate the problem. Are you able to access the internet via Actice Sync? When connected to the WLAN are you able to access any other services on the internet such as windows live to check your email or if you have HTC HOME the weather info?
Also check to make sure you are getting a proper IP address, Gateway, and DNS server from the router to your PPC. Task Manager is a good utility which lets you run the Ipconfig/all command. You can also use the PING command in Task Manager to see if you can ping anything on the internet.
If you are getting the proper TCP/IP settings trying accessing a site using its IP address instead of its Domain Name to islolate if the problem is with the DNS server settings in PPC.
If still no luck post the results from the above troubleshooting and we'll go from there.
Correct IP Address, check! I forgot to mention...
Thank's for your help, I'll check the steps in the evening at home.^^
I just can connect to my router's IP address and see the configuration page. My device has it's own static IP.
IE says "site cannot be displayed, because the connection has been interrupted".
Do I have to quit HSPDA and Bluetooth? I guess not.
Let me know if you can connect to this http://134.126.10.50/
shazaani said:
Let me know if you can connect to this http://134.126.10.50/
Click to expand...
Click to collapse
No, same error.
Surfing via ActiveSync is no problem.
If you said that it's possible to connect to router but not outside of router, then do you use MAC Access Control and/or MAC Fillter Internet Firewall on your router?
Possibility MAC Filter Internet Firewall. Without MAC Access Control specified, it's not possible to connect to router.
Hopefully it helps.
Best regards,
TwoAce
I'm using a MAC Filter, but the MAC of my Kaiser has been written to the MAC list. I'm trying without the filter...
Previously I could connect to my home WLAN, but I could not perform any surfing until I came across a suggestion to goto Settings->Wireless LAN->Power Mode slide to Best Performance.. and viola.. I am good to go..
don't know if you have the same issue, but jus my 2 cents.. ohh n I was using Polaris aka Touch Cruise..
I have the same problem as [email protected] has - the root cause may or may not be the same however. Here is what I found in my case -
(i) Connecting to WLAN - no probems, works every time
(ii) While connected to WLAN, sending/receiving emails through my exchange server or browsing my company's intranet site - no problem
(iii) Surfing internet while connected through USB cable/active sync - no problem
(iv) Can't connect to any internet site while connected to WLAN
I found that when connected through USB Cable/active sync - the proxy server address seen when I go to Settings->Connections->Connections->Edit proxy server is the correct company proxy server address. The moment I connect to WLAN - this field becomes blank. Even if I edit and insert the correct address, it doesn't stick. The moment I disconnet from WLAN and go and check the proxy server address - again it shows the correct address. So the root cause of the problem seems to be that something is wiping out the correct proxy address while I am connected to the WLAN.
I remember seeing a thread somewhere discussing this vanishing proxy settings problem. I wasn't able to find it today but I intend looking again when I get an hour or so.
I agree with roomer11 about the power settings, i have two HTC tytn ii's and i had the same problem with both(one mine,one is my wife's)...i'm running wpa2-psk now but does it on wep too...
It work's.
I have deactivated the MAC filtering. I doesn't make any sense, because the MAC I've entered is the right one, but ok. Must be a Windows Mobile voodoo thing.
I run my own email server at home. When my HTC Touch Diamond is connected to my home network say via WiFi I need to contact my server (defaria.com) with it's private IP (192.168.x.x). However when I'm connect to the internet via say WiFi I need to contact my server via its public IP address (65.101.22.21).
What I want to do is override defaria.com's IP address but only on my internal WiFi connection. IOW I wish to set the /etc/hosts for this specific WiFi connection. Can this be done?