i just flashed my x1 with blackstone
and noticed that the hard keyboard layout changed (e.g. Fn + U = ! instead of 1, Fn + I = @ instead of 2)
does anyone have the fix for it? or kno how to change it back to how it's supposed to be?
i've done searches for changing keyboard layouts but no luck, all they're saying is just edit the registry with code 409 but i've checked my registry and they all seem to be the right codes
please help, thanks!!
Related
hi everyone, yesterday i've upgraded my k-jam with new rom pdaviet4, it's all fine the os is faster than ever, but i have a problem with the keyboard when i press the z button on screen appear an y and vice versa.
someone have a suggestion to fix this problem?
i've tried to change
HKCU\control panel\keybd\locale 0407 to
HKCU\control panel\keybd\locale 0409
but when i restart the device the value come back to 0407
HELP ME PLEASE
after changing the registry, let it dry for a minute then soft reset..
actualy dont reset with the reset button power it off completley by pressing the off button till it goes off
ok thanks, i try
u can install RegistryWizard and change the language through there settings, softreset, and ur good to go
Hey guys, got the keyboard remaped that's not an issue, however I've just noticed that the 'functioned' keys are not quite right, if I hold fnct-Z I should get a '-' but I get a '~' and X give me a '-' and C a '_'
Not a real showstopper but kinda annoying.
Any ideas?
I had the same problem. On top of that, most of the secondary keys were screwed.Let us know if any of those solutions work.
This is for the Wizard Variant for US (8125 & MDA). I am not sure about European layouts etc. But I have the above mentioned 2 devices and with this settings, they work for me.
HKCU\Keyboard layout\Preload ------ Default (REG_SZ) = e0010409
HKCU\ControlPanel\Keybd ------ Locale (REG_SZ) = 0409
Ok Back to the Grammys.
I am not using the PV version. However, on the Orwell version, the locale key does not exist in the registry. The locale key was add-on by PV so the keyboard will work with the local language.
You guys can try to delete the locale key. Turn off your Wizard and turn it back on to make the fixed stick. It should work correctly without the locale key.
mtvn said:
I am not using the PV version. However, on the Orwell version, the locale key does not exist in the registry. The locale key was add-on by PV so the keyboard will work with the local language.
You guys can try to delete the locale key. Turn off your Wizard and turn it back on to make the fixed stick. It should work correctly without the locale key.
Click to expand...
Click to collapse
that worked perfectly thanks man!
Is there a way to get English UK added to the regional settings option
i have a at&t fuze and on my stock rom and many other pressing Fn+Space would bring up the symbol menu.
however i am running Da_Gs latest 6.5 and Fn+Space does nothing.
any help?
hopefully a cab or regedit rather than reflashing
can anyone help? this is a problem as i use symbols heavily
try these cabs from shlomki http://forum.xda-developers.com/showthread.php?t=474192
no, the problem is not my keyboard layout- the problem is the symbols menu just isn't on my phone. all other Fn commands work fine
did you disable xt9 to bring back the old word suggestion?
I've been searching all over the place with no satisfying result
i didn't cook in HTC eZ input keyboards, because i don't want them.
if i do cook them in however i get the symbols- it seems the symbols are a part of the HTC keyboards :\
i've been trying forever to find a way to get the symbols without the htc keyboards, can't seem to find answers
Can anyone tell me how to do this on the Sprint stock ROM? I've been trying to find the answer to this question as well, it "says" on the keyboard in yellow that SYM is the key to the left of the space bar but NO keyboard combination I've pressed invokes the symbols menu.
anyone help.
Can anyone tell me how to do this on the Sprint stock ROM? I've been trying to find the answer to this question as well, it "says" on the keyboard in yellow that SYM is the key to the left of the space bar but NO keyboard combination I've pressed invokes the symbols menu.
anyone help.
GustavTheLion said:
i didn't cook in HTC eZ input keyboards, because i don't want them.
if i do cook them in however i get the symbols- it seems the symbols are a part of the HTC keyboards :\
i've been trying forever to find a way to get the symbols without the htc keyboards, can't seem to find answers
Click to expand...
Click to collapse
I've once lost symbols keypad when I've changed registry entry
"HKLM\System\currentControlSet\Control\Layouts\e0010409\Ime File"
from "\windows\eT9ime.dll" to "\windows\compime.dll".
So you might try just to cook "eT9ime.dll" and verify that above entry
points this file, instead of cooking whole EzInput...
This worked for me : Edit the following registry key: HKLM\HARDWARE\DEVICEMAP\KEYBD\CWSLayout - change the value from 1 to 0 and softreset.
BladeStorm said:
This worked for me : Edit the following registry key: HKLM\HARDWARE\DEVICEMAP\KEYBD\CWSLayout - change the value from 1 to 0 and softreset.
Click to expand...
Click to collapse
yeah if you read earlier posts, the keyboard layout is not the problem
you only need to install the xt9 portion of the htc keyboards. the symbols menu is pulled from the xt9.
Just for the records
GustavTheLion said:
i have a at&t fuze and on my stock rom and many other pressing Fn+Space would bring up the symbol menu.
however i am running Da_Gs latest 6.5 and Fn+Space does nothing.
any help?
hopefully a cab or regedit rather than reflashing
Click to expand...
Click to collapse
Just for the records: had the same problem on a Fuze with RRE 5, fix it doing the opposite of what the_ozyrys did:
the_ozyrys said:
I've once lost symbols keypad when I've changed registry entry
"HKLM\System\currentControlSet\Control\Layouts\e0010409\Ime File"
from "\windows\eT9ime.dll" to "\windows\compime.dll".
Click to expand...
Click to collapse
I changed compime.dll to eT9ime.dll and fix it
I installed the ATW keyboard fix that's supposed to increase the hardware keyboard lag on my tilt. I've always had the keyboard fix that I found in the sticky in the kaiser software thread, but it didn't work as well as it had with the other ROMs I've used. so I uninstalled it and tried the ATW fix. but now the symbols are all mixed up. the / and ! and such are not in their rightful places, but rather they are assigned to the keys they are assigned to on an actual PC. it's like this:
! = fn + 1
@ = fn + 2
# = fn + 3
$ = fn +4
and so on. the / and some other symbols aren't even assigned to any button on the keyboard, so I have to press fn + ok to bring up the symbol screen.
does anyone know of any keyboard fix that could fix this? or any registry hacks? (with the accompanying detailed direction of what exactly to edit)
I've already tried the keyboard fix that should be installed after flashing a custom ROM. oh, and my sig is wrong, I'm using mbarvian's solace 3.1 ROM.
oh and a hard reset didn't fix it.
ok after 2 hard resets and two reflashes it's back to normal. I just have to leave off the keyboard speed increase cab.
Hi Guys,
i flashed NRGz EnergyROM on my Rhodium and got the wwe keyboard layout.
After remapping the software keyboard (worked just fine), i tried to remap my hardware keybord, to the german T-mo standard. But it just doesnt work
Since i tried it via the Rhodium Wiki and several threads here in the forum,
i'm now asking for help, but most of my hw keys won't work
For example the FN key or the ctrl key. But the most annoying thing is, that caps won't work anymore
Can anyone help me to remap those keys plz
Change Registry value
You can use PHM RegEdit program to change the value of the key
HKEY_LOCAL_MACHINE/HARDWARE/DEVICEMAP/KEYBD /CuRLang to the value corresponding to your language (409 in Hexadicimal for English, 407 for german)
See this thread: http://forum.xda-developers.com/showthread.php?t=546131
IT WORKED NOW!!! Thx a lot
But my ctrl and FN key are still mixed up. How can i change this?
With new version of WM - 6.5.x it seems like Microsoft has changed hardware keyboard driver. With all previous versions of WM for Kaiser it was a simple trick to change the hw keyboard locale by changing the registry key:
HKLM\Hardware\DeviceMap\Keybd\
CurrLang (DWORD)
With WM6.5.x (with start menu button at the bottom) this registry key doesn't exist anymore. Creating one and setting the appropriate value doesn't change anything.
Does anyone have a solution for that? (particular I'm looking for a way to enable Cyrillic locale - value 1049 for CurrLang)
Moved as not ROM development.
This may help a user of my ROM "6.1" couldn't work it out but did with the REG bellow.. Worth a shot..
http://forum.xda-developers.com/showpost.php?p=5030523&postcount=772
Hope that helps.
Urah!!!!!!!!!!!!! It worked!!!!!!!!!!!!!!!!!!
So to change the keyboard locale use HKCU\MUI
CurLang (DWORD)