Database Develop

Need your HELP??!! REVERT WM 6.5 back to original WM6...

My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??

rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
First of all this is Android development so this is very offtopic. Second you hopefully can find and download the correct WM version from HTC by entering your S/N. Then I think all you need to do is to hold camera button + reset the device to enter SPL, connect to computer with USB cable and then run the installation (that you downloaded from HTC).

Hi Kalit_Kaffe, Thnx for the Help. Was helpless...thts Y had to post it here.
Anyways...is the hard reset(holding camera button...the soft buttons and stylus) the same as Factory restore??...then i wouldnt be needing the file that you mentioned for download??
Am i right?

Reset to factory defaults will not replace the 6.5 rom you have installed, you don't need to HardSPL again, that only needs to be done once.
Your best option would be to get a stock rom from the XDA Wiki pages, My advice would be either get a shipped rom that matches your carrier, or the latest generic HTC shipped rom, both can be found here: http://wiki.xda-developers.com/index.php?pagename=Kaiser_ROMs
Note that once you flash a rom a Hard reset does not remove it, only flashing another rom will do that. Also flashing a stock rom is actually one of the best ways of clearing out previous flashes.

hi
Hey man thnx a lot! really helps!

HELP!!!!!!!!!
How do I install the USB driver for HTC TyTN II, to whom I am the Android 1.5. Before that I was a Windows Mobile 6.5 and am using Microsoft ActiveSync. I would like again to get back to WM 6.5, but can not seem to connect mobile phone and computer.

You can't flash back to Windows Mobile through usb while in Android because of the driver issues. You have to either enter bootloader mode and flash, or you have to do it through your storage card. And before you post back asking me how to do that, use the search. There are instructions all over the place.

thank you very much I was able through bootloader mode

does anyone know what is the best WM for HTC taytn 2? I am installing TPC_Kaiser_Titanium_Ultimate_28002, it's not something particularly good

There is no *best* ROM. Please read threads and flash based on your needs. I think it's about time this thread be done for.

rglive2008 said:
My TYTN 2 (KAISER) came with the original WM6...But I upgraded/flashed it to WM 6.5 and that kinda sucks for me...
How can I revert it back to WM 6????
HELP.
Should I Hard reset it( by pressing several keys+stylus)??
Or should I hardSPL it again and flashing the WM6 Rom back??
Click to expand...
Click to collapse
Looks like you need to downgrade your Hard SPL for WM6 so that it doesn't pause a lot.
http://forum.xda-developers.com/showthread.php?t=498320
Also there seems to be a guide for what you want. Sorry I stopped reading through the threads when I saw someone say you don't need to do anything with your hard spl.
http://forum.xda-developers.com/showthread.php?t=335568

problem with XPERIA X1 ROM 826X Windows Phone 6.5.5 build 23518 (New UI) You last vis

I've tried this Rom. its perfect, it works good and fast.
but my problem with this is:
when i make soft reset my phone starts at the Hard reset screen. and i have to reinstall my softwares again.
is there and solution by this problem???
Tnx.

Try to flash some other ROM.

hi again,
I've already found the problem.
I reinstall the ROM again, but this time i did this instruction:
- DO PULL BATTERY before flashing this rom
- Do HARDRESET after flashing this rom
- Do Softreset after restoring your contacts, etc and settings. Twice softreset will be better!
and now each time i make a soft reset there is no any problem.
i love this rom, many tnx to its author.

saieed91 said:
hi again,
I've already found the problem.
I reinstall the ROM again, but this time i did this instruction:
- DO PULL BATTERY before flashing this rom
- Do HARDRESET after flashing this rom
- Do Softreset after restoring your contacts, etc and settings. Twice softreset will be better!
and now each time i make a soft reset there is no any problem.
i love this rom, many tnx to its author.
Click to expand...
Click to collapse
i had the same problem....Try flashing the stock ROM it works

How to get x1 6.5.5 rom...
hi guys ...do some one know how i can Get 6.5.5..Rom for my sonyericsson x1..
i HAVE BEEN SEARCHING FOR DAYS.....PLEASE HELP!!!!

Hi there
Hi there
By searching through the internet you can find lots of ROMs for your X1, but the thing that is very important is; the Rom that you choose should be reliable, faster than any other previous ROMs and known.
If you are interested to change your x1 rom 1st you need to unlock your x1. You can find the unlock tools and its instruction on the forum. And 2nd you can copy the topic title and paste it on the google to find the download links.
By the way, I recommend you this Rom it's very very great.
XPERIA X1 ROM 826X Windows Phone 6.5.5 build 23518 (New UI)

Help~Restoring back to Window Mobile 6.1

Help all, im flashing my htc blackstone to window mobile 6.5 and found that many things are not function like camera and etc. Moreover, i have been found tht the respond are damn slow, this make me decided to restore it back all to original window mobile 6.1 by using Hard Reset but its failed. anyone can help me? my rom is the older version rom of 1.14 and i cant flash to 1.56 at all or else the colour of the screen are freaking uncomfortable. any one here please help me with this. im a newbie only so i hope got any guidance for me to flash my rom to window mobile 6.5 with a more complete version. Thx~

hi, an hard reset is intended only for restoring default option of the last flashed rom.
I suggest you to read the dummy guide for flahing.
You need the stock shipped rom for your touch hd. You can find it in the wiki section.
Then you have to flash that rom to restore your blackstone to "factory settings".
Bye,
Nicola

ooiwaysean said:
Help all, im flashing my htc blackstone to window mobile 6.5 and found that many things are not function like camera and etc. Moreover, i have been found tht the respond are damn slow, this make me decided to restore it back all to original window mobile 6.1 by using Hard Reset but its failed. anyone can help me? my rom is the older version rom of 1.14 and i cant flash to 1.56 at all or else the colour of the screen are freaking uncomfortable. any one here please help me with this. im a newbie only so i hope got any guidance for me to flash my rom to window mobile 6.5 with a more complete version. Thx~
Click to expand...
Click to collapse
To flash a wm6.5 rom you need to put HSPL or USPL on your device first. If you want a rom based on 1.56 you'll need HSPL 1.56. If you want a rom based on 1.14 you'll need HSPL 1.14
Check out this thread for a step-by-step guide
Please post further flashing queries in Dummies Guide thread
Ta
p.s. thread closed

[Q] I'm pleading. Help me load my kaiser please.

Please, I tried loading Android on my At&t Tilt, and it wasn't successful, so I decided to switch back to Win 6.5, but could not load beyond
"Smart Mobility"
R 1.70.01iNex
G 25.65.30.04H
D 1.56.00.00
Please, I'll appreciate your help and concern. I've spent more than 10 hours trying to fix it using most of the thread posts.
I will love helpers to be specific on how to change back to win 6.5, and the complete tools for making android work on it.
I will also love someone who can help me through chat page on facebook or yahoo. My id is tundelogic for both. Thanks in anticipation and God bless you.

If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5

Infosoft.lt said:
If I understand correctly, you've installed Android into NAND and later WM 6.5. In this case you must firstly install original WM 6.1 and only then WM 6.5
Click to expand...
Click to collapse
I tried installing android, but it didn't install, after much trial, I felt switching back to WM ROM will work for me.
Please, don't be annoyed can u please post links of all I'll need to get my phone back to WM 6.1. i.e
Hard SPL to be used, Radio to use and Rom to use. I appreciate your response. Thank you.

> HardSPL 3.56 (force USB) / or you can use 3.34
http://forum.xda-developers.com/showthread.php?t=498320&highlight=Hard+SPL+3.56
> Radio 1.71... (actually I've never had any problems with other versions, but 1.71 is the newest).
http://forum.xda-developers.com/showthread.php?t=393182&highlight=Radio (post #3)
> Official WM 6.1
http://forum.xda-developers.com/showthread.php?t=439408&highlight=Kaiser+WWE+6.1
Because there were some problems for you while trying to flash Android, I recommend firstly to enter bootloader (hold Camera + Power buttons together and reset with stylus (button for reset is near miniUSB port; just put stylus in it and push for a few seconds); you'll see tri-color screen with SPL version...), then connect it to computer and finally run WM 6.1 EXE file (in case you're using Windows 7, set file compatibility mode to XP <- I'm not sure if it's necessary).

Thanks I'll get back as soon as I'm successful. Please, if you won't mind, can you please give me your chat id, so that if I have any issue, I can reach you quickly. Thanks once again. Y! [email protected].

If you'll need my help: http://www.facebook.com/Vytautas.Baciulis

Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.

tundelogic said:
Please I need someone to upload prepared files needed for Android, as I've tried preparing with aTools, following the tutorial without success.
Click to expand...
Click to collapse
You can get the files needed to run the android and guide at http://forum.xda-developers.com/showthread.php?t=680518

How to upgrade from 6.1 to 6.5(xperia x1)

kinda newbie here in terms of custom ROMs or flashing but could somebody give me a step by step procedure for me to be able to upgrade my xperia x1 6.1 to 6.5? just don't want to brick my phone.
i know that there are lots of tutorial here but i can't find which is the best & stable.

every one is quite stable, if you charge your phone 100% and don't plug your cable out of the phone nothing will go wrong.
After hardspl use SD-Methode to put your 6.5 rom on your phone it's the simpliest way, there you cannot damage your phone with putting a x1 rom on your x1 (with roms from other phones it could damage your phone but i am not sure)

1-unlock yr phone with spl 0.78
2-connect phone with full charge(20% is enough)
note: DON'T use task 29 if u don't flash yr device everyday!
3-try romes to find yr best choice
there is nothing in a simple regular flashing to brick the device

thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?

Wakatsik said:
thanks for the replies, im trying to consider this ROM but when i read the thread i found that there are some bugs.
is it possible to revert to 6.1 if you're not satisfied with 6.5? could a simple hard reset do the job?
Click to expand...
Click to collapse
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1

the link for rom I proposed
Dynamics 2.2.0

manishabanzadeh said:
it's good rom but I suggest this one....It's stable & up to date.don't use htc rom just download GTX 2.2.0 & enjoy!
about the question.no the rom is not a program,It's the os of device.like your pc.it's like that you install windows 7 instead of XP so if you Decide to go back to XP you neet to install it.
if you want to go back to WM 6.1 you need to flash the stock rom again(that is simple).but I think you'll never go back to 6.1
Click to expand...
Click to collapse
thanks, will try that & give you feedback

another set of questions....
these are the instructions in flashing x1 to 6.5 but don't understand most of it, sorry for the stupidity =)
-----------------------------------------------------------------------------
Installing:
0) Make a system backup!
Useful apps: SPB Backup, PPC Pim Backup, Sprite Backup
1) Install Hard-SPL 0.78 by OliNex!
2) Put needed cabs to \Storage Card\autocfg\.
Supported formats: *.cab, *.provxml, *.reg, *.rgu.
*.CAB: by default they will be installed to internal memory. Cabs with "_ui" in their names will have an opportunity to be
installed to storage card.
*.EXE: AlphaUC can install *.EXEs from \Storage Card\autocfg\exe\. If you add "_nowait" to filename, customizer won't wait
until it finishes
3) Use task29. !!! Put kovsimg.nbh to storage card !!!
Link: http://forum.xda-developers.com/showthread.php?t=649230
4) Then flash needed ROM as always (via storage card or via CustomRUU). Make a Hard-Reset.
5) Wait for the end of customization. You will see message about it on the second launch.
After that make a soft-reset.
-----------------------------------------------------------------------------

help, the link for task29 is missing, how can i continue?
for number 4, how will i do that?

android froyo 2.2 for xperia x1
hello, guys i'm kinda newbie. how do i get the android froyo 2.2 for my xperia x1. pls help. thanks