Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
This should be in the Q&A section.
But,
What recovery do you have?
[edit]
oh right, drop into terminal Alt+x, type ums_enable and connect your phone through usb and copy over the rom and Amon Ra's latest recovery.
Joe92T said:
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
Click to expand...
Click to collapse
You could try posting in the right section.... or you could go to recovery, drop to console and type ums_enable- then connect your phone and move a rom over
Joe92T said:
Ive got a big problem, recently my old SD card **** out so i replaced it with a brand new one with nothing on it. Upon first boot nothing was loaded because obviously APP2SD puts everything on the SDCard, however not even market was loaded on the phone itself so it was impossible to even download anything
Now the big issue!!
In my stupidness i thought i would just wipe and reflash a new CM with the new SD card and see if that fixed everything.. However i wiped and then i realized i didnt have a new ROM on my SD card to flash back too!! so now when my phone boots it just boots to a black screen and nothing appears because there is no rom to run... my phone itself is wiped data/cache and my SD card is completely clean due to it being a brand new one
How can i get my phone working again? right now it is INOP as i dont have any rom on it whatsoever and it wont even boot, i dont have a microSD adaptor to put it on my computer with and load a rom on it
is there some failsafe way to get it back to stock firmware incase something like this happens?
Click to expand...
Click to collapse
Go buy an sd reader. Or if you have aman ras recovery you can set it to go to usb fro the recovery menu.
first - wrong section
second, if you have a custom recovery - go to the shell and type
ums_enable with usb plugged in
inop
You need a card reader and the ra dream recovery and you would of fixed it
Wow all of you said the same thing?
And repeated it
Even ^ copied the rest of you by saying got rec mode.
ur first card prooly didnt go bad, u prolly didnt flash the ext-fix from cm..correct? thats what happened to me and i then realized my sd was fine, i was also stuck at the g1 screen b4 i flashed the fix. also from what i read all u did was wipe so ur rom is still there, see if u can grab the old card and getter dun. and stop being a jackass and post this where it goes!!
Post in the correct section, next time, please.
Moved.
Related
i have a class 6 adata 8gb 2gb ext4 64mb swap rest fat32
im running cyanogen 4.0.2 or 4.0.4 whichever one i load up from sd at the time, but both are stable. i have newest radio and spl also. the issue is simple. i can get into recovery mode and bootloader menu. everytime i reboot it goes to bootloader menu(3 skateboards). camera button is not held down either or stuck. the only way to get past this screen is to evertime i reboot to factory wipe and install new rom which is a pain. i was wondering if by having the original image DREAIMG file in a folder on my sd is whats causing this. but now that i cant get past this screen i cant remove it from sd. i also already tried mounting sd to comp from console using: "ums_enable" it does nothing(tried it on 3 computers). im tired of reseting and reflashing. pls some assistance.
Have you tried to reflash the SPL? You could just redo the entire root process and replace everything.
New Isuue, Same Problem
Sorry it took so long to get back here. No I haven't tried that. How could it be the SPL? Im asking it in a meaningful way, like why and/or how could it be?
I will reflash the SPL tonight and edit post if it works.
I also erased my sd card and re partioned in in "parted" it booted fine. The battery died today and i rebooted it and BAM! bootloader screen again. So i factory reset and flashed a new ROM image. then it worked fine. now only problem is the private apps i have installed wont work and they get stuck on uninstalling....Whats the fix for that?
Thanks XDA!!
You need to start over and replace everything. It sounds like you have multiple problems. Use THIS guide starting with the downgrade bacause it will reflash EVERYTHING on your phone. If the problem persist then it's hardware issues. Redownload everything, don't use anything you already downloaded because these files might be bad too.
Here's what happened, I was going to flash back to Super D from Cannon's Eclair rom and went into recovery. In recovery(Amon-Ra's) I chose flash a zip file like usual. The roms took 4 seconds to display which I found was odd but carried on anyways. Then I flashed the rom and other junk, but in my notification bar I noticed an sd card with the "!" on it. Apparently it was damaged and my G1 wanted to format it, but of course I just ignored this message and rebooted. Now when I reboot it goes through the animations and such but doesn't load the Lock screen or OS . Help me out please =P
protomanez said:
Here's what happened, I was going to flash back to Super D from Cannon's Eclair rom and went into recovery. In recovery(Amon-Ra's) I chose flash a zip file like usual. The roms took 4 seconds to display which I found was odd but carried on anyways. Then I flashed the rom and other junk, but in my notification bar I noticed an sd card with the "!" on it. Apparently it was damaged and my G1 wanted to format it, but of course I just ignored this message and rebooted. Now when I reboot it goes through the animations and such but doesn't load the Lock screen or OS . Help me out please =P
Click to expand...
Click to collapse
try a differant sd card
zachattack052 said:
try a differant sd card
Click to expand...
Click to collapse
Don't know how that would help...I'll try it anyways
EDIT: Nope thanks anyways
Anyone know how to back up stuff from the recovery/adb to your computer through adb or console?
protomanez said:
Don't know how that would help...I'll try it anyways
EDIT: Nope thanks anyways
Click to expand...
Click to collapse
ha its worth a try, can you get to recovery
Yeah, as it's not bricked just the SD card is corrupted and needs to be formatted =P
protomanez said:
Yeah, as it's not bricked just the SD card is corrupted and needs to be formatted =P
Click to expand...
Click to collapse
It doesn't work when you try to flash from a new SD card? I had an SD card go bad, I couldn't recover anything from it, it wouldn't format, either on the computer, or on my phone.
I put a new card in, repartitioned with Amon Ra, loaded the ROM I wanted onto the root, and flashed with no problems.
I still haven't found anything which will read the old SD card though. Good thing most of the contents were backed up on my PC.
i have been running damagecontrol 2.0.8 and over the last few days had some weird forced closes and then last night my sense clock and stuff dissapeared. When trying to go into settings - > application management it would force close also. So i downloaded the damagecontrol rom again, put on my SD, went into recovery and wiped everything. For some dumb reason i also wiped the SD card.
so i put the rom back on SD, and flashed. nope, i didnt nandroid after deleted it. OOPS! and of course im an idiot and didnt ever copy my nandroid to PC
so anyways, i have flashed the rom a few times now and im stuck in a never ending HTC/Sprint boot up loop. I've tried everything I can think of and nothing will boot the phone.
Any ideas or am i screwed?
Nope youre bricked......
ok so do this:
Make sure you wipe everything, sd card included (0 for ext, 0 for swap, all for FAT)
The copy the rom back to the phone and flash again...
Worst case is to run the RUU1.56.
Oh yeah post this in general next time.
Mods will probably move it - if so thats where your thread went.
lol your NOT bricked. Bricked means no way to recover. If you can still get to your recovery screen your fine. Like the last post says boot to recovery go to the wipe screen and wipe every category Data / sd extension / other ones arent really necessary. Pick a ROM put it on your card flash and enjoy. oh then MAKE A BACKUP!
menzo44 said:
lol your NOT bricked. Bricked means no way to recover. If you can still get to your recovery screen your fine. Like the last post says boot to recovery go to the wipe screen and wipe every category Data / sd extension / other ones arent really necessary. Pick a ROM put it on your card flash and enjoy. oh then MAKE A BACKUP!
Click to expand...
Click to collapse
Forgot my <Sarcasm> </Sarcasm> tags again
power off, remove your sd card, and power on.
You most likely have something screwy in your ext partition.
Had this same issue...
I wiped everything (factory reset, davlik cache, etc)...flashed the ROM again. Had no luck. My phone came back for about 2 minutes...and was running insanely slow and freezing up after every button press. Tried running a nanoid restore...with no avail. I ended up getting my phone replaced with a reconditioned model. And it actually feels better than the new one I was using, lol.
I don't know what peoples problems with a reconditioned piece of equipment is. If I have the option to buy refurb at a store I do - simply put: A company cannot afford to test EVERY thing that is spit of the production line, they grab every say 100th one.
IN THEORY:
Each and EVERY refurb is tested and inspected, so its really almost garunteed that you will get a better product. Unless of course the QA person is a moron/lazy - which actually maybe the case with refurb heros...have seen a few horror stories.
I had something like this happen too. It would get stuck on the boot screen in a loop. I was able to get into recovery, but it could not read the SD card at all. I had to format the SD card and flash a new rom. I'm wondrering if it's because I dropped the phone and that cause the SD card data to be corrupted.
Ok, I might have bricked my phone. I had the cm7/Aosp gingerbread mod. But I didn't have apps2sd enabled. So I downloaded rom manager, flashed the newest version of clockwork recovery, and rebooted to recovery, where I partitioned for apps 2 sd with a size of 256 mb and 128mb swap-space . I then factory reset, and formatted Boot, cache, data, everything. After that I went to mount as Usb, and I copied the Rom, gapps, and a battery icon mod back to the phone. But the phone didn't recognize any installable packages on my sd after I un-mounted, so I shut my Hero off in hopes it would when I turned it back on p) . When I turned the Hero on, it went to a Usb-fastboot mode, and I couldn't get it to turn off so I removed the battery from the back of my phone, then put it back in. Now my phone won't turn on at all. Does anybody know what I did wrong and can I fix it?
http://androidcommunity.com/forums/f60/how-to-apps2sd-for-droid-34800/
http://forum.xda-developers.com/showthread.php?t=666420
not sure if this will help but maybe you can find some info there
Hopefully that squared you away. But for future question, please post it in the general or question section. This area is specifically for devs and their projects.
oohaylima said:
Hopefully that squared you away. But for future question, please post it in the general or question section. This area is specifically for devs and their projects.
Click to expand...
Click to collapse
Alright sorry, I think I meant to post it there but then kinda freaked out >.<
spleef said:
http://androidcommunity.com/forums/f60/how-to-apps2sd-for-droid-34800/
http://forum.xda-developers.com/showthread.php?t=666420
not sure if this will help but maybe you can find some info there
Click to expand...
Click to collapse
Thanks Spleef, but I was wondering how to get my phone to turn on again as it seems to have just quit on me
Whenever a ROM doesn't boot up properly, boot loop, freeze, etc, I usually have to pull the battery out. Then when I restart it, I hold down the Volume Down and Power buttons at the same time to boot into recovery. Try doing this while the phone is plugged into your wall charger and see if that helps.
Also, I'm not 100% on how to get the apps2sd working, but I had a question about which version of Clockwork you were using. I thought with CM7 Gingerbread we were supposed to use version 3.0.0.5 of Clockwork. I know there is a new version, 2.5.1.7 I think, that shows up in ROM Manager. Unless something has changed, I don't think it will work with CM7.
I'm still pretty new to this, so hopefully someone else will chime in here for you.
Good luck.
i did the same thing one time you gota wipe everything again i mean even the sd card and extthen take ur sd card adapter and put rom gapps any extras on ur sd card then put it back into ur phone then flash it in the order of rom,gapps,extras,and kernel last if u are using one hope this helps
p.s this was using CWM 2.5.0.1
This just happened to me the other day, except I was trying to use firerats partition mod. See if it will boot by holding volume down or up while powering on. It worked for me, but I had to ruu back to stock and had reroot with z4root.apk
Sent from my HTC Hero CDMA using XDA App
Ok anytime you do a factory reset from the phone you most likely will loose root. And leave your phone charged over night it should come back on. And your swap is to big IMO. For apps to sd try a 28 or 32 swap and 512 partition. Then upgrade you ext from ext2 to ext3. And you were supposed to wipe everything before you flashed the apps to sd file. As in wipe everything data,cache,dev-cache and ext. Then flash your rom,google-apps,and kernel last. Boot up sign into your account and let it sync. Then boot to recovery and flash the apps2sd zip. After that you should install your apps. And I think you should ruu and reroot. Sounds like you lost root when you did factory reset from with in the phone. Just my opinion. Hope it helps good luck.
Something.About.Me.U.Dont.Like.
Its.Cool.I.Understand.AWAH
Hey,
Been trying to reset the tab to factory defaults the tab does his mojo untill it reboots into android 2.3.6 and then everything is still on the internal SD card.
Then i went to hook it up on the pc tried manually deleting everything on the internal SD pc say's its done i look in the tab and its all still there.
Tried copy'ing files over to the SD card but does not wanne stay on it.
Ok now then i went on booting odin up and rooted it + cwm recovery on it it does it like a charm and works can boot into the recovery.
Now since i cant hold any roms on the internal sd card i went on using an external sd card put on cm 10.2 and gapps,
Installed the rom then reboots into a newer version of cwm and it tells me its not rooted.
ok fine i restarted the tab and went back into recovery then it was rooted.
Went on to install the cm 10.2 and gapps now its hanging at the cm logo on boot
So i went on to flash dbdata.rfs.tar wich normally gets me passed a bootloop.
This time however it dident work.
Anybody has any ideas i can still try to get it to work ?
I think its more of a lock on the internal SD card since it can't hold any files nor delete's anything but im not sure hopefully some1 with some more experience then me can help me further on this problem
Thx
Not locked. The internal SD chip is failing.
You will see many post that has symptoms such as: previous owner info cannot be removed. New data cannot be saved. Wiping failed.
My mind was vaguely thinking that but still hoping it wasent