Related
I am new to completely flashing a custom ROM. I've been trying to flash a new ROM on my tilt, with the latest AT&T updates(ROM 1.62.502.0 Radio 1.27.14.09). Each time I try to flash a custom ROM I get Error 262 Update Error. The progress bar never gets past 0%. I've tried multiple PCs and tried reinstalling ActiveSync. Am I missing something, or do I have to do something first before being able to flash the new ROM?
Any help is greatly appreciated!
Steve
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
I am about 100% sure you searched, didn't you?
Here, baby boy, let me spoon feed you and you can ask your mommy if she can whipe your drool:
http://www.digwin.com/view/schaps-wm6-pro-roms-update-error-262
bapssystupr3m3 said:
i suggest u read all the wiki's and stickies regarding flashing a custom rom before taking any action...u obviously havent read it or havent got a good understanding of it which is why ur getting this error...and btw..i also suggest u search for solutions rather than just posting a thread like this which can be answered through a brief search of the forums.
Click to expand...
Click to collapse
I have searched the forums over the past week or so. The solutions suggested such as soft reset, hard reset, reinstall activesync, switch USB ports, etc have not done anything. I also came across this thread:
http://forum.xda-developers.com/showthread.php?t=370205
which would suggest that I there is an incompatibility. I was hoping someone could point me in the direction of which radio version etc I would need to update to in order to update to a WM 6.1 ROM.
edit:yes I have run CID unlock.
Steve
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
_Alex_ said:
AT&T 1.62.502.0 w/ 1.27.14.09 radio should flash fine on any Tilt even without CID unlock, since it's signed by AT&T. While I'm glad to hear your phone is CID unlocked, it's still strongly suggested that you flash HardSPL & Security Unlock your device.
Regarding your current issue, have you:
* Tried another computer to flash from?
* Entered tri-color bootloader mode on your phone prior to flashing? You can find out how to on the wiki.
Hope this helps!
Click to expand...
Click to collapse
Thanks Alex! Tri-Color mode worked!
Steve
My error 262 fixed
I don't know if this is the best place to put this, but I didn't want to open a new thread.
I too had been getting repeated error 262. And I spent a couple of hours searching for answers, and while there have been many questions raised on this subject, there have been few clear solutions (and certainly none that worked for me).
I have the HTC branded Kaiser installing from Vista. (By the way I am new to this, but as I had such a hard time working this out, I thought I should at least post what worked for me.) I unlocked the CID with pof's Hard-spl v1 tool. Then (as I want to stay with Mobile 6.1) I upgraded the hard spl to v3.28 by JockyW. I then downloaded a number of Roms I wanted to try. That is where the trouble started.
Each ROM I tried would get past the tri-color screen with no problem. Then it would hang at the 0% until finally showing the error 262. A soft reset would reload my previous rom unchanged. I tried many things: removing all USB's, firewall, virus protection, hard reset, reboot windows, every suggestion I could find (and understand).
While the hard spl I had should have worked, I thought I should try version 3.29. When trying to upgrade to that I had a similar problem with error 260 this time. Looking over spl update instructions I realized I had forgotten to uncheck "disable usb connections" in "Activesync" at the proper stage. Once that was unchecked, the new spl loaded. After that I was able to load the cooked roms with no problem.
It appears there was something wrong with the HardSPL v3.28 I was using or in how I installed it. The tricolor screen was showing 3.28. In any case, after I reinstalled a new hard spl (this time 3.29), I had no more error 262.
A bit long-winded, but hopefully this might help someone else.
hello could anyone help me ?
my device is stuck in bootloader and its recognized by the PC
this happened when i was trying a cooked rom
IPL 1.09.0001
SPL (ditto)
I searche everywhere an there seem to be only ways out for people with SPL 4.00.xxxx
is there a way out ??
thank you
sorry fr the bump but i really need help
I tried placing the phone in bootloader and installing the official HTC rom
but i get an ERROR 300
and the percentage is stuck at 0 on the screen
Try to flash your device with the Stock ROM.
That usually works
He already tried this, but it didnt work.
Let me just quote a post from dougstoner:
dougstoner said:
Well, yes and no. In the long run, it's better to Hard spl your phone. A lot of the roms in the forum require hard spl first. If you somehow fail during the hard spl, then you end up with a "brick". I used the uspl method first to flash, and it was a little easier to do, but hard spl'ing insn't complicated either. You just have to make sure of your ipl number is higher than 4. You can check this by holdign down the camera button, and press the soft reset button (use the stylus on the side to press) and continue to hold the camera button until you get to what's called the bootloader screen. It's red, blue, and green. Here are the instructions for hard spl, but MAKE SURE your ipl number is hight FIRST. If it isn't, you will brick your phone.
I case of people who don´t read 200 post and still brick their device - here is the guide that worked for ALL people with:
HTC P4350
XDA Terra
WING
with IPL 4.xxx and higher!!! (that is IMPORTANT)
and then follow this:
Default
For me it was working when:
1. install canonyang.cab
2. install aserpolicy.cab
3- install disablesecurity.cab
4. SOFTRESET
5. run RUU from Hard-SPLWM6 folder verison 4.70.yang
6. screen will become white - WAIT until it reboots itselfe.
7. done!
check if SPL now is 4.70.yang
Fore sure: I used this
http://rapidshare.de/files/38148213/...l_WM6.rar.html
mirror: http://www.sendspace.com/file/ot8zsn
It worked for many others, too.
Click to expand...
Click to collapse
So the IPL should at least be 4.xx but as you posted yours is 1.xx?! Might this be the issue?
Unfortunately, a SPL of 1.x after a hardspl/USPL means that the phone has been permanently bricked. Did you try to hardSPL your device or use USPL? They're both only compatible with 4.x SPL's.
I saw that someone recently came up with a way to fix bricked phones. They weren't Heralds, I forgot what they were... They basically found a way to use a buffer overrun on the SPL to launch code so they could launch a patched SPL and reflash... i wonder if our SPL's have that same bug and the method could be applied to us, too.
hey,
if my Herald is IPL 1.xxx can I somehow make it a 4.xxx? Or is there no chance to flash other roms? What does the IPL depend on? Production date?
thanks everyone for your patient replies
I guess for IPL 1.x there seems to be no solution as of now !!!
it was actually working initially with touch IT after Hard spl but i wanted to give a try to another version of touch it thats when the device got bricked .
I feel really sorry for you, but dont give up yet. As ivanmmj said, there could be a solution. Just check the forum.
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
xtc.sanchez said:
I am not sure whether it helps but I did a little search and found severals threads:
Fix Bricked HTC ELF/ELFin
Someone with the same ERROR300 as yours
good luck
Click to expand...
Click to collapse
thanks so much mate !!! I will look into it right away
iv done all the reading
iv heard there was a way to flash the ROM through SD so i did try using
HERAIMG.nbh for the official rom from the HTC website !!
somehow the ROM does not work (invalid rom)
id try a couple of roms !!maybe ill be lucky !!
thanks again xtc.sanchez and everyone else
its been very informative and helpful
HI , friends i been trying to sim unlock my new tytn2 which is in uk orange network now.
I tried to install hard spl, i m new to this technical worlds like cooked rom, new hard spl etc ,.any one please tell me how to do this step by step,
When i tried to install hard spl, there comes a tricolor screen first white screen with progress bar 0% , and after some time it stucks and in pc shows error message. tried with jump spl method described by some one, in the kaiser section, what is the meaning of wm6 and wm6.1
Following are the details of my phone
R 1.27.12.29
G 22.45.88.07H
D 1.81.00.00
KAIS130
SPL-1.81.0000
CPLD-8
What should i do to get my phone unlocked, plz help i assure 5 pounds to the one who has time to help me in this. cheers friends.
WM6 and WM6.1 are Versions of Windows Mobile, see Settings, About on your phone.
Looking at the Radio version, you are a WM6.0 user still.
To install Hard SPL read here: http://forum.xda-developers.com/showthread.php?t=334679
If you get a white screen, read here: http://forum.xda-developers.com/showthread.php?t=354061
Once you have Hard SPL complete, you can SIM Unlock, read here: http://forum.xda-developers.com/newreply.php?do=newreply&noquote=1&p=2572785
I suggest you read here Getting Started and on the XDA Wiki, there is lots of information on the HTC Kaiser page that covers the basics.
It is appreciated to search and read before posting new threads when the information is already available. If you get stuck with one part, re-read the thread, search for your problem, and then (and only then) post in the thread you are trying to follow.
Thanks
Dave
thanks dave.but i tried it, i couldnt even install hard spl, i dont know what happens when i run jumpspl also it shows white screen no further actions takes place. i dont know what to do now.
pappoos4u said:
thanks dave.but i tried it, i couldnt even install hard spl, i dont know what happens when i run jumpspl also it shows white screen no further actions takes place. i dont know what to do now.
Click to expand...
Click to collapse
Try SSPL First, then JumpSPL 1.56, then JumpSPL 1.93. one should work.
Ta
Dave
pappoos4u said:
...i dont know what happens when i run jumpspl also it shows white screen no further actions takes place...
Click to expand...
Click to collapse
Dave's second link above says "If you get a white screen..."
Hello, my device has a SPL of 5.04.0000 and I want a new ROM on it because it still runs WM5...
Now, in some threads I read that devices with an SPL higher than 4.xx.xxxx do not need to hard SPL it... but I'm not sure about it...
Can anyone give me the correct answer on the question if I need to hard SPL my device?
Let me first tell you im still a new flasher myself (Atleast to PDA's, Ive flashed PSP's And numerous other phones) and the way I read it, its much safer to flash with the HardSPL. I had the 4.00+ SPL and Still HardSPL'ed my TMo Wing. Its quick, easy, and it also sped up my phone quite a bit by taking off uneeded junk! Any questions please feel free to ask. Ill help as much as possile.
So if I understand everything, it is nessaserry to HardSPL my Herald before I can flash it with another ROM? And there is no difference with phones with an SPL of 2.XXX or 4.XXX or in y case 5.XXX? It still has to get an Hard SPL?
Well,
you will definitely need Hard SPL when intending to use a custom ROM! But beware: All devices with an SPL below 4 will brick when trying to Hard SPL them. So be sure to have an SPL of at least 4. Don't know if there's any workaround or w/e.
Cheers
I have an SPL above 4 so it will work! There are different "ways" to hard SPL the phone... does anyone know what the easiest way is?
Heres the thread I used.... it was quick and painless lol.... Clickity Click! But before u get started if you have windows vista there will be a few minor issues, but i can walk ya through that if necessary.
Used that thread as well. Works flawless
Cheers
Hi
I am having some problems when trying to upgrade my Orange SPV M700 to Hard SPL. I have followed the instructions given in "TrinityGuides.info" but I am not convinced the Hard SPL has actually worked okay. This is what happens:
1) I follow the initial instructions (run ROMUpdateUtility.exe) and click on the various screens ("I understand" "I completed") etc
2) I get to the point where the screen says "You are now ready to update your ROM image. This operation takes approximately 10 minutes"
3) I then click on "Next", the progress bar screen appears and I get the message on my SPV about running programs - I select 'yes' on the SPV.
4) Immediately I hear the Windows XP 'dum-dum' noise letting me know that a USB device has been disconnected. Also my ActiveSync is gone. I have not done anything to cause this though - the connection just goes down.
5) I then get a message telling me that the device is not connected and I have to exit the Hard SPL routine.
6) After reading the FAQs on TrinityGuides.info I re-run the "ROMUpdateUtility.exe" and get to the progress bar screen again. This time I see the grey screen on the SPV, with progress bar rapidly completing on both the SPV and my Desktop screen progress bar.
7) After literally a few seconds I get a screen telling me "Congratulations! Your ROM update is now complete etc"
Even though I see the congratulations message I am not convinced it has successfully installed Hard SPL.
Firstly, whereas the messages suggest it can take up to ten minutes to do the Hard SPL mine only takes a few seconds. Secondly, when I follow the TrinityGuides.info instructions on how to check the Hard SPL (by pressing power, camera and soft reset) I see this:
On my tri-colour screen this is displayed:
IPL-0.50
SPL 1.07.0000
The "TrinityGuides.info" instructions say that I should see this:
TRIN100
IPL-0.50 (your device may show IPL-1.00)
TRIN100 MFG
SPL-1.20.Olipro
I have tried both the "Hard SPL 1.20.Olipro" and "Des' Crash-Proof SPL" but nothing makes any difference to the display I see.
Can anyone help me? I am concerned that if I don't have the Hard SPL correctly installed I am going to risk bricking my SPV if I try upgrading the ROM, unlocking the SIM etc (which is what I want to do). Is there any other way I can tell whether Hard SPL is installed correctly?
Thanks in anticipation!
Spivvy
If i remember correctly hard SPL is a quick process, it's the ROM flashing that takes ten minutes or so. As to why it's not working i can't offer any help, sorry.
Hi DeeDee
Thanks for taking the time to reply. If, as you say, the Hard SPL does happen very quickly (in my case it seems a second or so) then that's good to hear as I was sure something had gone wrong.
Does anyone know if what I see on my tri-colour screen is correct? (i.e. IPL-0.50, SPL 1.07.0000) as before I proceed with any more drastic updates I'd like to make sure my SPV is protected against bricking.
Thanks again
Spivvy
UPDATE.....
I spotted this person's solution to what seemed to be a similar problem to mine:
http://forum.xda-developers.com/showthread.php?t=382246&highlight=ActiveSync+disconnects
I decided to try his fix. I used Olipro 1.20 Hard SPL.
The Hard SPL procedure did continue in a more convincing manner than my previous attempts, and the progress bar took a bit longer to complete, and I also received a message telling me that the operation was successful. I then did a soft reset and felt that maybe this time it had worked.
In a rare moment of feverish optimism I pressed the buttons to check the SPL version now on my Orange SPV (power, camera and soft reset). However, it is still telling me this:
IPL-0.50
SPL 1.07.0000
i.e. nothing seems to have changed. No sign of Olipro's SPL again.
In a word, I am flummoxed.
In two words, I am very flummoxed.
So, I am still putting out an appeal to you clever bods as to how I establish if I have a safe Hard SPL on my Orange SPV, or is it still looking a bit iffy (a technical term for "not very good")
Thanks
Spivvy
i am seeing the latter version with OliPro SPL, OK it's v1.2 but it's still different from yours.
Are you trying this on Vista or XP, personally i have always used XP for flashing. Whether that's going to make any difference i don't know.
I have a question along similar lines, although not identical. I'm completely unable to get from the triband screen to the bootloader screen. I'm trying to flash from my mini-SD card, but one it gets into that SSPL triband screen, it doesn't do a thing. I'm running vista on my PC, and can't seem to get any useful action trying to flash from there. Getting a little frustrated, cause I haven't even been able to SIM unlock my phone so far... Considering going the IMEI route, although that won't do anything for bootloader and upgrapding ROM later on... Any advice, or should I just use IMEI and go the easy way?
Dan
Hi DeeDee
I am using Windows XP, which I think is the preferred OS for this type of operation. Very puzzling.
Thanks
Spivvy
Hmmmm.....
It's looking like I am not going to resolve this problem as no one has posted an actual solution. I am not sure what to do now - my gut feeling is that my SPV M700 has not been Hard SPLed (based on what it displays as described earlier).
All I know is that I have followed the TrinityGuides instructions (and other postings with information about this type of thing) accurately. I have done it several times (using both Olipro 1.2 and Des Crash Proof) - but, for some inexplicable reason, my SPV M700 would appear to refuse to accept the Hard SPL.
As no one has said otherwise I have to assume that the tri-colour screen information I see in bootloader mode does mean that I have not successfully SPLed?
I can't understand why some (in fact most) people seem to get the Hard SPL flashing performed okay and yet mine refuses. I know from searching the postings that there are a few unlucky souls like me who have not been able to do it successfully.
If anyone does have any suggestions I really would be grateful to hear them, but for now it looks like I have drawn a blank. Pity.
I have run out of ideas - could it be some other program I have installed is interferring with the process? Is it my version of ActiveSync (4.5.0)? Is it some setting I have got on the SPV M700 that is preventing the Hard SPL? There surely has to be a reason why the Hard SPL is not working?
Still hanging on, hoping that some shaft of light might shine on my SPV M700 one day...
Ho hum...
Spivvy
Hey u are not alone, my Trinity ( Dopod D810 variant ) just simply refuses to flash to any hard spl as well, same problem as yours, i am using windows xp to flash so i doubt its the driver problem.
I found a solution to this problem though, i use SSPL to flash cooked rom to my device.
http://forum.xda-developers.com/showthread.php?t=293632
Just paste the .exe onto your trinity and open it using file explorer, it should enter bootloader with a "by des" behind the bootloader number, it should be safe to flash then.
I tested flashing WM 6.5 by savesaint, Finix's 6.1 with no problem
ADDons: Anyway the reason i suspect is because my one has been flashed with HTC P3600 rom, yes, by HTC without dopod branding, hence the problem
Hi there - thanks for that tip. I will try that link you suggested, and have a go with the file. I'll get back to let you know how it all went.
Many thanks for taking the time to post your suggestion.
Cheers
Spivvy
Hi
I thought I would report back as to the progress (or lack of it) regarding the failure to Hard SPL my Orange SPV-M700. There's not much to report I'm afraid, which may be largely to do with my lack of confidence etc.
I checked out the link suggested above by "/b/-TarD" (using SSPL to flash cooked rom to device - as described at:
http://forum.xda-developers.com/showthread.php?t=293632
However, when I read the various posts and experiences I still felt that this might not be the solution I was looking for. I am not very technical with all this ROM flashing but the original Hard SPL method seemed to me to give me some insurance against bricking my SPV-M700. This SSPL does not seem to leave you with a Hard SPLed device (I am not exactly sure what it does to be honest), and in fact some people seem to have had quite difficult problems after using it.
Call me a cowardly old geezer but I have backed away from trying the suggested solution at the moment (but still very grateful to user "/b/-TarD" for his suggestion).
My aim was to:
1) Get the basic HARD SPL on my SPV-M700 - Olipro or Des, but having followed all the Trinity guides faithfully, it would appear that my device doesn't wanna play ball with me — very frustrating.
2) Re-instate/upgrade the GPS radio thingy (which I believe you lose after you Hard SPL)
3) Unlock my Orange SPV-M700 so that I can use any SIM card in it
4) Then, finally, consider upgrading the ROM to one of the newer WM6 versions, or a better WM5 version.
But, at the moment, it would seem that it's not to be.
Ho hum....