Hi I upgraded my 9090 to WB 6.5 from Xplode latest release. I’m really happy with this and everything works fine except one thing.
I configured my mail-account and everything went on nice and worked find. Then sudden the account is gone and don’t shows up in the account manager.
I have tried this three times now and the last time the account seem to stay. The problems are two.
First: In some way the old account names is still in the OS so I can’t use their names, who I want to. How can I get rid of them?
Second: In the WB 6.5 start window, the horizontal navigation bar for E-mail, who have the account names, the old non functional mail account names is visible there. How can I get rid of them?
Can I clean the mail for account names? How.
Regard
Ola A.
I found a small app. who fixes the problem with the invisible mail accounts.
Here is the link: http://nicolasmauri.blogspot.com
I hope this problem not are to frequent and if someone have a solution I’m glad you tell me.
Regard
Ola A.
Related
I am using goodlink on my TILT and when i go to send an sms it doesnt pull my goodlink contacts only my sim contacts.. any clue how to access goodlink contacts for sms?
The Windows Mobile OS will only pull up the native contact list. If you are using ver 5 of GoodLink you can get the GoodLink server IT admin guys to be sure that the one way (that is from GoodLink to your native contacts) is enabled on your phone.
According to GoodLink literature the reason for this functionality is just for this reason and for things like Voice Command (or other voice dialers) that also use the native contact list. In this case the OS uses the native contact list for SMS msgs
jmr79x said:
I am using goodlink on my TILT and when i go to send an sms it doesnt pull my goodlink contacts only my sim contacts.. any clue how to access goodlink contacts for sms?
Click to expand...
Click to collapse
Quick question .. how did you get goodlink on your tilt...my restore from backup method did not seem to work. Did you do an OTA install?
EDIT: See my solution posted below
What version of Goodlink are you running?
Do you know if your admin guys have upgraded to ver 5?
jcrompton said:
What version of Goodlink are you running?
Do you know if your admin guys have upgraded to ver 5?
Click to expand...
Click to collapse
Just figured it out ... problem was I had goodlink on my 8525 too (which as of about 20 mins ago, when the fedex guy got here, is being retired), and I could only have it on one device at a time. Once I figured that out, just got a new PIN for the Tilt and it seems to be running the OTA provisioning without a problem.
jcrompton said:
What version of Goodlink are you running?
Do you know if your admin guys have upgraded to ver 5?
Click to expand...
Click to collapse
Mine pushed out 4.9.3.21 and it's working just fine...
I got our admin guys to upgrade to 5.0 then upgraded (it automatically loaded it). It looks a little different to 4.93. its not that much of a big deal except you get a nice RSS and the ability to make a calendar appointment private (finally). BUT admin gets to see all the apps you have on your Kaiser and they can lock anything out! you can also get your admin ppl to allow good contacts to be used for native lookup (phone, sms etc.) but it didnt seem to function as well as activesyncing contacts (it doesnt show company name - in fact it doesnt sync company name and you end up with lots of UNNAMED contacts).
I also had a couple of issues on the install becuase Activesync forces you to add a password and Good doesnt like this when it installs. tyherefore in the end i did it via ahard reset.
All in all, its a luittle better. im testing it for stability before they roll it out to thers where I work.
Please report back on the experience - It would be great to know how things work before I try an push for the upgrade as well.
How well does that RSS work, and is it only set up on the phone, or does it sync with your Outlook acct? (ie - is it a box in your exchange account like the native rss support in Outlook 2007)
Good vs. BBC
I have used goodlink for years starting on my treo 650 then my trusty (kind of) 8525. The whole separate contacts thing really annoyed me so when I got my tilt I switched to, dare I say, blackberry connect. As opposed to using separate software to manage the calendar and contacts, it uses the built in wm apps so the contacts issue goes away. Just something to think about if you have the option to use either one...
Guys,
My org uses goodlink (good.com) as the email service provider not microsoft's push mail. I recently upgraded to a tilt and changed the rom promptly to schapps latest release.
The way the good software works is that it adds its own software stack (email/contacts/calendar etc) which syncs to the my outlook. The problem this creates is that my contacts do show up (the right softkey button leads to contacts which are the goodlink contact list) but are not connected to my dialer.
To be able to use smart dialling i then have to manually sync my phone to my computer to copy the contacts again which is a pain. My previous phone was based on windows 2003 whose dialler showed the goodlink contacts directly.
If there are any ideas or suggestions please let me know.
memon01 said:
Guys,
My org uses goodlink (good.com) as the email service provider not microsoft's push mail. I recently upgraded to a tilt and changed the rom promptly to schapps latest release.
The way the good software works is that it adds its own software stack (email/contacts/calendar etc) which syncs to the my outlook. The problem this creates is that my contacts do show up (the right softkey button leads to contacts which are the goodlink contact list) but are not connected to my dialer.
To be able to use smart dialling i then have to manually sync my phone to my computer to copy the contacts again which is a pain. My previous phone was based on windows 2003 whose dialler showed the goodlink contacts directly.
If there are any ideas or suggestions please let me know.
Click to expand...
Click to collapse
This is not what is supposed to happen. I use GL too. If you sync with Active synch eventually, you will end up with duplicate contacts. Sometimes it takes a bit of time for this to occur. This applies to GL 5. In 4.9, I had to do exactly as you are stating...synch only the contacts with active synch.
interestingly, I have a post regarding Good Mail. I found that using the XDA Live 3.0 (WM6.1) with the reTOUCHED dialpad, my contacts, while in the phone mode, linked to my Lotus notes contacts, not my local ones.
If I'm understanding you correctly, this is exactly what you want to happen (exactly the opposite of what I want to happen on mine).
I have 5.0.3.23 good mail with the above and it works the way you want yours...
Good luck,
MBN
MustBNuts said:
interestingly, I have a post regarding Good Mail. I found that using the XDA Live 3.0 (WM6.1) with the reTOUCHED dialpad, my contacts, while in the phone mode, linked to my Lotus notes contacts, not my local ones.
If I'm understanding you correctly, this is exactly what you want to happen (exactly the opposite of what I want to happen on mine).
I have 5.0.3.23 good mail with the above and it works the way you want yours...
Good luck,
MBN
Click to expand...
Click to collapse
With 5.0 the contacts are shared. If you sync with active sync, they will be duplicated because you are already syncing the mail server. GL 5 takes over much more of the system than past versions. I have found no way to change its behavior at all. If I make changes, it has protections in it that undoes the changes.
thanks for the help guys. I got on IT's case and changed my GL version to 5.0 and a hard reset and the installation of the retouched dialler everything is now working exactly the way i want it. Thanks guys!
parleyp said:
With 5.0 the contacts are shared. If you sync with active sync, they will be duplicated because you are already syncing the mail server. GL 5 takes over much more of the system than past versions. I have found no way to change its behavior at all. If I make changes, it has protections in it that undoes the changes.
Click to expand...
Click to collapse
Have you tried using Microsoft Voice command with Goodlink contacts? in my search for a solution i found a thread on another forum which said that voice commands/dialling wont work with goodlink contacts and we will have to sync them again. Im going to be trying it anyway but just wondering if somebody has already done the effort.
I can also vouch for that. I am the good admin at my org and the latest 5.0.4.46 works quite nice with outlook contacts and allows for smart dialing.
memon01 said:
Have you tried using Microsoft Voice command with Goodlink contacts? in my search for a solution i found a thread on another forum which said that voice commands/dialling wont work with goodlink contacts and we will have to sync them again. Im going to be trying it anyway but just wondering if somebody has already done the effort.
Click to expand...
Click to collapse
I use voice speed dial and it works with GL 5 owning the contacts without doing a sync via active sync. Haven't used MS VCMD so ymmv.
jfor26 said:
I can also vouch for that. I am the good admin at my org and the latest 5.0.4.46 works quite nice with outlook contacts and allows for smart dialing.
Click to expand...
Click to collapse
I just wish I could talk my IT guys into a longer wait period before locking the phone...30 minutes kind of sucks when using the GPS...in a car. Any ideas for hacks? I haven't found any.
I just installed emoze, which I finally managed to get working well, but it automatically configured itself to call the mailbox "emoze", and I would like to change this. I searched all over the registry, but was unable to find this.
Does anyone know where WM6.1 or TF3D store this information, so I can go in there and change it (the way emoze installs itself on the device you cannot go in and edit this setting via the WM interface).
Thanks!
Hi Diplomate,
emoze uses a special API to set the account name, changing it will result in emoze not functioning at all.
Gilirock.
I finally gave up on emoze!
In the end, I had to give up on emoze, as it has a couple of very annoying bugs:
First, any calendar event which recurs yearly gets added multiple times back into the Outliik calendar (using the PC client), but I was not able to figure out the logic there: some where added 5 times, other 12, others 13. None were touched/edited/open on either the device or Outlook, as they were set months in the future... a reat PITA to clean-up!
Second, emoze seems to ignore the "File As" field when importing contacts into the diamond, so all your contacts revert back to the default "lastname, firstname" display order, regardless of how you have them set in Outlook. As this sort order cannot be changed in TF3D, you are SOL!
Basically, a great idae/product if you could configure it to only take care of e-mail, and let ActiveSync take care of your calendar/contacts, etc. But this is not possible - apparently emoze wants to only do it all, so...
Too bad! I loved the push e-mail!
Guys,
With my tilt and TF2D if I had more than 4 e-mail accounts then I would get a down arrow below the 4th account in the accounts tab. So when I wanted to get to the other accounts I could scroll down.
Now with my Fuze (Both AT&T ROM and HTC Rom) I see 2 problems. First when I add the 5th account to the accounts list I get an error in Manilla.exe. the account gets added but I cannot select it from the accounts tab. I have to go to the tab, tap inbox and then pull down the list of accounts at the top and select the new account.
The second is that TF3D doesn't seam to support the down arrow for more then 4 accounts. Based on the error I am getting when I add the 5th and 6th accounts it seams that the code is still there and trying to work but fails.
Anyone got a fix for this? Any help would be great!
Hate to say this, but try a different e-mail client? Something like Flexmail for instance is superior to poutlook in every way, with the only downside (to it and everything else out there) being that it's not integrated with TF3D. With that many e-mail accounts you'll probably want something more advanced anyway.
flinx1 said:
Hate to say this, but try a different e-mail client? Something like Flexmail for instance is superior to poutlook in every way, with the only downside (to it and everything else out there) being that it's not integrated with TF3D. With that many e-mail accounts you'll probably want something more advanced anyway.
Click to expand...
Click to collapse
I know I can use another client I was just hoping that some of these other great minds on here could point me in the right direction to make the OEM tools work. I know they did in TF2D and I'm sure there is a way to get the same result from TF3D.
Anyone?! It would be greatly appreciated.
4 mail accounts only???
hey all i have a cab (wont say from where) that i think will correct this issue. It is a cab for the EPIX but i think it might do the trick.
4th email fix
HOPE THIS WORKS! i looked around and i see where and how to upload files. Here you go and i hope this works.
Thanks justpe8709,
Can you also provide the link to the thread so that I can read more about what this cab does? That way I can see if this is what I need without having to clean up my phone from another cab install that didn't uninstall correctly.
Thanks!
well i got this .cab from a ummmmm non public site. so this is the only thing I have for you. If you want to message me your # i can call you and let you know more info on it.
I recently flashed the [25 February 2009] HyperDragon IV Lite. That went smoothly and is running well. However, I have an email issue to which I haven't been able to find a solution.
The problem is of my own making. I had backed up data before flashing the ROM. After finishing the install, I tried to set up email accounts, but was having an issue with my AT&T account - a whole different matter.
So, after being unable to download email, I decided to restore the backup I'd done. I assume since I'd flashed a new ROM, the following problem occurred.
I can see the email from my personal account in the TouchFlo interface; however, it isn't listed as an account in the accounts list and I can't download new mail or open an inbox. I also can't create the account now since the Tilt thinks it's already been created.
I have no way to delete the account since it's not listed in the account list and can't create a new one for this email address. Additionally, my exchange server was restored and I have the same problem there; except for the fact that I'm getting new email. However, I have a gap of a couple days I can't download because I have no control over the account. It shows in the account list but can't be deleted or changed.
So...does anyone have a good solution to this? A way to remove the accounts so I can start from scratch maybe???
I very much appreciate any help I can get with this.
Thanks,
GT
You can try this, I have used it before to clean out phantom email accounts
http://forum.xda-developers.com/showpost.php?p=1944125&postcount=3
Thanks for the help. It fixed the Bellsouth to the degree that I could delete it and start over. I still can't manage to delete the Exchange Server account. The options simply aren't available when I attempt to use them. Still working on that one.
Thanks again, I appreciate it.
GT
I ran this program a couple times more, and it finally let me delete the sync relationship and email associated with this exchange server account.
I've been able to reestablish this relationship with exchange online and setup the account correctly. So, both accounts have been corrected.
I appreciate the help very much.
Thanks Again,
GT