Hi. Yesterday i installed a new ROM on my touch diamond, after that my touch diamond won't start. And what's weird?? I can go to Bootloader and I can do a hard reset, but i can't connect with PC on bootloader and i can't enter Bootloader with USB Mode...plz help me
Solved !!
LOL. I tried for many times to go to USB Mode Bootloader pushing VOLDOWN+OK+Reset.....when i pushed VolDown and Rest...all done and now i'm flashing my new rom...thanks XDA Forum, Ur the best
i got a problem,after installing Mystery rom i cant start my diamond,when i turn it on,it stay at screen TouchDiamond and i cant do anything...any help? PLEASE!
markos807 said:
i got a problem,after installing Mystery rom i cant start my diamond,when i turn it on,it stay at screen TouchDiamond and i cant do anything...any help? PLEASE!
Click to expand...
Click to collapse
you can imitate the way of qemasoft to make your device go to the boot loader, then you flash back to the official ROM that you can get in http://shipped-roms.com/index.php?category=windows mobile&model=Diamond
Related
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
mfesenko said:
Hey guys, i was flashing a new ROM and after i pressed Jump SPL on the phone , i didnt do HARD SPL but went on and installed a ROM ....well now it starts with the loading screen ...........and just never loads..... any suggestions ? is it trash ?? i hope not. Thank
Click to expand...
Click to collapse
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
denco7 said:
Try flashing your stock ( original ) rom, found in the wiki . And start over again.
Oh yeah, and this time it might be a good idea to read ALL the instructions FIRST.
Click to expand...
Click to collapse
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
mfesenko said:
How ?? how can you do this with out Jump SPL ? its at the first initial screen with the name of the rom.... and thats it , connecting to my computer doesnt even make a connection sound......
Click to expand...
Click to collapse
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
denco7 said:
Try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to PC and see if you can run the RUU in your stock rom.
Click to expand...
Click to collapse
Nope, it just does a regular soft reset , and back to the same screen
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
JugglerLKR said:
it is easy to flash it back with original rom or unlock it. just read some tutos here on xda
Click to expand...
Click to collapse
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
mfesenko said:
i looked into it and they had solutions if your phone is in the tri colored screen. my phone is not. my phone is in the loading windows screen... but it never loads.
Click to expand...
Click to collapse
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
mfesenko said:
Nope, it just does a regular soft reset , and back to the same screen
Click to expand...
Click to collapse
Keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
JugglerLKR said:
that's even better - just start it in 3color boot loader and flash!
loading windows screen appears AFTER 3color boot loader...
Click to expand...
Click to collapse
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone.
Maybe you didnt read well enough..
Maybe, I didnt Explaine it correctly but , I do NOT get the tri colored screen . This is how it goes after i press the power button to start my phone : So it automaticaly goes into loading screen where on the bottom right hand corner it shows the Radio version , the G version and some other version.......... and that is the only screen i get after staring my phone
Click to expand...
Click to collapse
YOU AREN'T BEING ASKED TO HIT JUST THE POWER BUTTON
try to put your phone in bootloader. Press and hold camera button and power button, while pressing soft reset with stylus. Once in bootloader. Connect to pc and see if you can run the ruu in your stock rom.
Click to expand...
Click to collapse
keep trying to put it into bootloader. Try a hard reset and follow instructions to get it into bootloader. Sometimes it takes several tries.
Click to expand...
Click to collapse
THAT MEANS DO IT AGAIN !
Thanx
Thank you denco , for the info , and thanx chumley for beating some sence into me. So i got to the bootloader. Do i need to instal my original rom or can i just reinstall the one i got or maybe another one?
well I have the same problem.
It started with the edfc problem explained here
While trying to fix that problem, I switched my rom to the TPC elite rom series (windows 6.5).
All went fine till three days later, while text-messaging, the screen freezed. I removed the battery, restarted the device and found myself having the same symptoms discussed in this threat.
Putting my phone into bootloader doesn't work, and I think It has to do with the problem I had before; that apart from the directional buttons and the power button, all buttons are defunct.
Anyone any suggestions? (apart from: don't bother us, etc, etc...)
my phone randomly bricked too a while back....as far as I understand is that either you CAN put your phone in to bootloader or your phone is junked....correct me if im wrong ppl
.....make sure you hold the camera and power buttons then reset with stylus....
and make sure you install your stock rom...aka the att tilt rom
if you didn't do it already...
1. flash your original rom (SD card method - Step 5 Flashing Via MicroSD Card ) you need the rom to be at least from the same operator. it should run just fine, just as long as you follow the directions.
2. HardSPL,SIM CID unlock, etc. as described on the same forum i pointed to a little earlier. from this point on you should have a phone just like it was when new.
try to read more carefully (maybe a few times) and search before you start a new thread.
on the wiki and in the stickies in the rom development section you get a lot of "bricked" solutions. you just have to read them all and see what is your case...
Hi everyone.
Ive got a MAJOR Problem here.
My Cell Phone doesnt start at all.
If i put it one the USB Cable it can Start up like 5 Seconds.
Then it Reboots and Reboots again and again by 5 Seconds.
If I Disconnect the Phone from USB screen turns Black Immediately...
I thought it could be the Batterie... but.. it worked just fine yesterday..
(have i Mentioned that this weird Sticker on it turned red..? Some kind of sign saying me it got wet?)
All this started as i got a Coloured screnn with saying ´´Serial´´ @ the bottom of the Screnn... just exact like the Flash Screen
I Flashed the Rom which is on the Internal Storage i put bevor. To bad it aint the Stock ROM!
Then i also tried Hard Reset.
But everytime i boot... i only get as far as 5 Seconds.
Is there any Chance to Flash this Baby with original ROM (Stock ROM, RADIO and SPL)
I want to send that Baby in... but if they find out i Flashed it... i wont get any Warranty... ;(
So PLEASE GIVE ME ANY ADVICES!!!!!
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
krisztian b said:
Try to flash with the original ROM. Go to HTC homepage-support, download the ROM and flash. It may help...
Click to expand...
Click to collapse
You only can Flash if u got a Active Sync connection.
So ... Cell cant boot... i cant flash...
HELP
Just go into bootloader mode (you have Hard SPL installed right?) by booting up the phone while holding down the volume down key. Then connect it to the pc with the USB cable and run the CustomRUU to flash another rom. Should work! Else you should try to MTTY (that solves the resetting stuff right?).
I was just about to say to try to get Diamond into bootloader mode manually. http://forum.xda-developers.com/showthread.php?t=405659
MTTY wont work... cause i cant boot at all
But THX for your help flashing it back to Original...
This Thread can be closed
Is My Phone bricked HELP
It is stuck in the Start up screen "smart mobility" in the middle of the screen with the rom details at the bottom right. It won't go passed this. I tried to put it in boot loader mode so that I could try and reinstall the Rom but phone doesn't recognize the usb - (at the bottom of the boot loader screen it says serial when unpluged and the USB when connected to PC). Any Ideas Plz I connot live without a phone.
The Rom I was last using was the latest Topix ROM
kaisersolo said:
Is My Phone bricked HELP
It is stuck in the Start up screen "smart mobility" in the middle of the screen with the rom details at the bottom right. It won't go passed this. I tried to put it in boot loader mode so that I could try and reinstall the Rom but phone doesn't recognize the usb - (at the bottom of the boot loader screen it says serial when unpluged and the USB when connected to PC). Any Ideas Plz I connot live without a phone.
The Rom I was last using was the latest Topix ROM
Click to expand...
Click to collapse
Did you re-flash the Stock ROM at least once?
Thanks for the Reply
Where can I find the blackstone stock rom.
Sorry to be a pest not used the forums for ages
Why can't you try to flash via microSD ?
Put the ROM image in the root folder of the microSD, named exactly BLACIMG.nbh
Then start the Blackstone in bootloader: you will be prompted to start the flash by pressing the power switch.
Good luck!
Marco
Quality
Cheers Guys who answered my plea for help.
all is well
yahoo!
Glad you got this sorted
Thread closed
ok so here is the situation with my G1 im no expert i just googled stuff and rooted the phone and have been trying to install roms on it since to change the look features etc you know the deal. so i stumbled upon this
http : // db. androidspin . com /android_build_screenshots.asp?build_id=322
and it was all good and everything it just didn't have android market for some reason i tried installing different on but after this installation the recovery menu had changed from how i was and none of the roms loaded just stuck on the start up screen then i wiped the phone installed again regular 1.6 and everything and i tried it all and it didn't want to load up and now its stuck on the start up screen which say t mobile G1 and i can get in to recovery mode with camera and end or home and end keys and I'm exhausted
PLEASE SOME ONE TELL ME WHAT TO DO PLEASE HELP ME I WOULD HIGHLY APPRECIATE IT PLEASE
wajid456 said:
ok so here is the situation with my G1 im no expert i just googled stuff and rooted the phone and have been trying to install roms on it since to change the look features etc you know the deal. so i stumbled upon this
http : // db. androidspin . com /android_build_screenshots.asp?build_id=322
and it was all good and everything it just didn't have android market for some reason i tried installing different on but after this installation the recovery menu had changed from how i was and none of the roms loaded just stuck on the start up screen then i wiped the phone installed again regular 1.6 and everything and i tried it all and it didn't want to load up and now its stuck on the start up screen which say t mobile G1 and i can get in to recovery mode with camera and end or home and end keys and I'm exhausted
PLEASE SOME ONE TELL ME WHAT TO DO PLEASE HELP ME I WOULD HIGHLY APPRECIATE IT PLEASE
Click to expand...
Click to collapse
Ok, just so i am understandin whats goin on..
You've rooted your phone, installed a few roms any now your stuck at the boot screen..
Can you get into recovery? by pressing (HOME before power then holding both until you get into recovery menu)
Can you get into fast boot? by pressing (Camera before power then holding both until you get into fast boot menu)
tnxs for replying and no i cant get to recovery anym0re in anyway just stays on G1 screen thats it it all happen after i installed that stupid thing in the link i provided im so mad i just had got this phone and like most people googled around and learned about the root and stuff and now im stuck
wajid456 said:
tnxs for replying and no i cant get to recovery anym0re in anyway just stays on G1 screen thats it it all happen after i installed that stupid thing in the link i provided im so mad i just had got this phone and like most people googled around and learned about the root and stuff and now im stuck
Click to expand...
Click to collapse
The ROM is CM6, Have you tried installing Danger SPL for that or what have you tried....you need to explain better otherwise it will be a guess work for us....
Either give step by step process or links to the file which you flashed....
G1sanju said:
The ROM is CM6, Have you tried installing Danger SPL for that or what have you tried....you need to explain better otherwise it will be a guess work for us....
Either give step by step process or links to the file which you flashed....
Click to expand...
Click to collapse
hello like i said i put this in there
http: // db.androidspin. com/androidspin_developer_display.asp?developerid=3#304
after that i tried to cgange it to another rom and i couldnt it just stuck on the G1 the rom above was installed on it and was working fine it just didnt have the android market for some reason o i was trying to change it and after that it stuck on G1 screen and i repeat I CANT GET IN RECOVERY SCREEN ANY WAY NOT HOME AND POWER OR CAMERA OR POWER IT JUST DOESNT DO ANYTHING
wajid456 said:
hello like i said i put this in there
http: // db.androidspin. com/androidspin_developer_display.asp?developerid=3#304
after that i tried to cgange it to another rom and i couldnt it just stuck on the G1 the rom above was installed on it and was working fine it just didnt have the android market for some reason o i was trying to change it and after that it stuck on G1 screen and i repeat I CANT GET IN RECOVERY SCREEN ANY WAY NOT HOME AND POWER OR CAMERA OR POWER IT JUST DOESNT DO ANYTHING
Click to expand...
Click to collapse
You Flashed this rom and it was working fine right?...except market....to get the market you have to flash google addon,
When you try to change this what have you done, have you tried flashing something or just try to go into recovery and you are not able to go in...
G1sanju said:
You Flashed this rom and it was working fine right?...except market....to get the market you have to flash google addon,
When you try to change this what have you done, have you tried flashing something or just try to go into recovery and you are not able to go in...
Click to expand...
Click to collapse
yeah i did trying the basic one it had on it 1.6 or soemthing but nothing worked and after that ir wouldnt get in to recovery mode
If you cannot get into the bootloader (camera + power) or recovery (home + power), and the phone is not detected via ADB on your computer (adb devices), then your phone is bricked.
You will need JTAG equipment to unbrick it, search around the forums, there are many threads dedicated to this.
Hi,
My HTC touch diamond 2 has struck at tri-color and when I tried to upgrade the ROM it is stopping at 16%. I downloaded the rom upgrade software which is compactible to my Czech republic phone and tried all methods but no luck. Can anybody guide me how do i rectify my phone and get it functional?
Please help.
I assume that you pulled the ROM from HTC.com using your S/N?
You can try flashing again, just enter boot loader screen by holding Volume Down as device reboots until you get to the tri-colored screen, once you see USB on the bottom of the tricolored screen you can reinitiate flash from your PC.
If it continues to get stuck, you may want to attempt to flash HSPL and try again.
zamahtc said:
Hi,
My HTC touch diamond 2 has struck at tri-color and when I tried to upgrade the ROM it is stopping at 16%. I downloaded the rom upgrade software which is compactible to my Czech republic phone and tried all methods but no luck. Can anybody guide me how do i rectify my phone and get it functional?
Please help.
Click to expand...
Click to collapse
what is the error code you get in RUU?