Related
(Swiss) if anyone is interested? I also have the ext rom files (which are already posted on xda-developers ftp) if anyone wants those as well
Moridin
I have uploaded the extended rom. I also have the complete rom but it is an image of a 1Gb SDcard :?
Do you have a smaller image of the rom ? I'm interested.
Yep...it's the typical 40-50 MB. I will attempt to post it this evening and will add a link here.
BTW, you can use itsutil to extract the correct sized image from your sd. I will also find the link (to the instructions) and post it for you this evening.
Moridin
uploading the rom file now. Should be done within the hour.
My Orange SPV M3000 French ROM
ftp://xda:[email protected]/Uploads/HTC_Wizard/Orange_SPV_M3000-FRA.rar
You will need the itsutils to aplly it to your miniSD card.
http://www.xs4all.nl/~itsme/projects/xda/tools.html
I used this "how-to" to do mine and it worked perfectly both ways
http://www.modaco.com/Backup_your_Typhoon_ROM-t201334.html
Hope this is helpful! :wink:
Moridin
hello
i have qtek 9100 i need french rom orange spv but this link the doesn't open in my computer some boby can help me !!! sorry for my nad english i need french rom for spv m3000
ftp://xda:[email protected]/Uploads/HTC_Wizard
then copy the Orange rom to your machine.
Moridin
BTW make sure you backup your extended_ROM2 as the flash will likely replace your files with the Swiss french Extended_ROM2 files.
hi moridin
hi moridin the program you give to me i can't open it, i use winrar to open but winrar found error, i don't know what's i can do for to open it, what's program you use for to open this rom orange_spv M3000 FRA ?
Try to redownload the file. If it still does not work I will put a recovery tool on the site so you can repair it.
Moridin
edit: I have uploaded quickpar and 10% revocery files. Install quickpar and run one of the quick recovery files to repair the Orange SPV archive.
it's very difficult moridin, it's doesn't work
I test but that always does not go I do not know any more what to make I downloaded quickpar but nothing has to make. :twisted: :twisted: :twisted:
I do not arrive has to make only you me requests.
Hi, I have bought from Ebay a HP 6510 whti english Language.
I'm Italian, and I wanto to install a Italian Rom.
I have downloaded it, but I cannot install it, becouse language is different and setup doesn't go on.
There is a solution??
Daniele
danielehk said:
Hi, I have bought from Ebay a HP 6510 whti english Language.
I'm Italian, and I wanto to install a Italian Rom.
I have downloaded it, but I cannot install it, becouse language is different and setup doesn't go on.
There is a solution??
Daniele
Click to expand...
Click to collapse
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Hello Asukal,
Wow .. I see you everywhere for changing language ..
I found you on google and saw your web site .. and reading so much of your posts ..
You are the expert here with IME.
I am having a problem for my Benq P51 that using WM6 JPN. I can't understand it because it is in Japanese. I try to work on it by changing it back to English or Thai but no hope.
Can I use your korechithai ?? or Do I have to do something as the above post ??
Please guide me !!
PS... I just installed your korechithai and it works !! i can read Thai now but .. everywhere is still in japanese .. such as, contact button, name of some programs, .. etc
ipaq 6515
i tried to cahnge language from spanish to english , update stopped at 0.1%, i disconnected after few hours and after that my ipaq is dead , i cant do nothing, its not recocnized by active sync, i tried hard reset but it dosen't show nothing, exept light shows that is charging , screen is empty all the time , if anybody had same problem please help me
chilly_ft said:
i tried to cahnge language from spanish to english , update stopped at 0.1%, i disconnected after few hours and after that my ipaq is dead , i cant do nothing, its not recocnized by active sync, i tried hard reset but it dosen't show nothing, exept light shows that is charging , screen is empty all the time , if anybody had same problem please help me
Click to expand...
Click to collapse
The bootloader was dead, there is almost nothing you can do (unless you know how to JTAG the 6515... or take out the ROM, reprogram and solder it back)...
watchsat might not be right i have read other posts that this error at 0.1% is due to radio rom not being compatable and freezing there. no idea what the solutoion to this is but i know that if you dump radio.nbf it will continue pat 0.1% but you will have no radio
dont read much chinese but go over to www.pxdxa.com and search for error there as well.
try with another pc
that work
i try that and it's working. first I try english to italian the resultat its ok
I come back in english end now I heve change in french
thanks
Asukal said:
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Click to expand...
Click to collapse
where i can find ROM for english language only for 6515-without letters ?
how do you open hpruu.in for editing???
Asukal said:
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Click to expand...
Click to collapse
hello everyone
Í have the HP ipaq 6515 yesterday i've updated it to the newest vesion 1.21 but i'm asking if someone has or can fabricate a dutch rom if possible
greets
hnaoume said:
how do you open hpruu.in for editing???
Click to expand...
Click to collapse
open it with Notepad or other txt editors.
ini was just text file.
chilly_ft said:
i tried to cahnge language from spanish to english , update stopped at 0.1%, i disconnected after few hours and after that my ipaq is dead , i cant do nothing, its not recocnized by active sync, i tried hard reset but it dosen't show nothing, exept light shows that is charging , screen is empty all the time , if anybody had same problem please help me
Click to expand...
Click to collapse
i also got same problem with you a long time ago.
then i had brought it to Hp service center.
i said to them " suddenly it never boot any more,,"
they replaced it with new one after few days.
(in my case, it was free of charge,but i dont think you also free)
pls try this, if you have little bit of luck, you can get new one
neogin said:
Hello Asukal,
Wow .. I see you everywhere for changing language ..
I found you on google and saw your web site .. and reading so much of your posts ..
You are the expert here with IME.
I am having a problem for my Benq P51 that using WM6 JPN. I can't understand it because it is in Japanese. I try to work on it by changing it back to English or Thai but no hope.
Can I use your korechithai ?? or Do I have to do something as the above post ??
Please guide me !!
PS... I just installed your korechithai and it works !! i can read Thai now but .. everywhere is still in japanese .. such as, contact button, name of some programs, .. etc
Click to expand...
Click to collapse
you can tweak registry in those valu with registry editor,
could it be posible to flash only OS and EXTROM to avoid radio bricking?
Asukal said:
hi,
1;DL English ROM from here
http://h20000.www2.hp.com/bizsuppor...sId=501209&swEnvOID=2050&taskId=135&swLang=13
2:unzip with winrar.exe dlonloaded [sp33246.exe]
light click this file and menu [extract to]
3;the files will be extracted into the folder name [sp33246]
then you can find following files
unicows.dll
CeiPAQ.dll
CEOS.nbf ----------- OS ROM
EnterBL.exe
EXTROM.nbf -----------Extrom
hpRUU.exe
hpRUU.ini
hpRUUENG.dll
iPAQPCSDK.dll
RadioFS.nbf -------------RadioFS ROM
RadioOS.nbf --------------Rado ROM
Readme.exe
ReadMe.txt
RUUClientDriver.dll
4:Extract Italian [SP33243EXE] with same way
and copy your CEOS.nbf from Italan Set & past to Desktop or any where.
Also replace with over writing EXTROM.nbf in the in the English folder.
5:Connect hw6500 to PC via AS as useal upgrade mode.
6:Start [hpRUU.exe] in extracted english folder.
7:go flowing instructions and proceed Upgrade program till finish
verify the Version of Device & ROM images are same languagese
8:This step is very IMPORTANT:
*Light click the Italian CEOS.nbf and select COPY from pull down menu.
*And click OK to start upgrading to fash the English image,
also past to the Copied Italian CEOS.nbf to over write English CEOS.nbf
at the same time.
if the timing was not wrong, upgrade exe will flash itaian ROM onto
your device.
i flashed Chinese ROM onto English deivice with this way.
But some of friend failed and bricked coz of bad timing
So PLS do this carfully, and on your own risk.
---------------------------------------------------------------
@Or another way i didint test.(may be not work ?
1:Edit [hpRUU.ini] in the folder in Italian
-------------------------------
OS_IMAGE=CEOS.nbf
EXTROM_IMAGE=EXTROM.nbf
RADIOOS_IMAGE=RadioOS.nbf
RADIOFS_IMAGE=RadioFS.nbf
LANGUAGE=ENG -------Chnage ENG instead of ITA
-------------------------------
Click to expand...
Click to collapse
and how to proced English to Spanish can you upload de rom hackng because i dont a expert computer
thanks a lot it worked perfectly for my HW6515 i used this tutorial to change the language from spanish to french. Cool
How can I update through memory card ?
My phone is showing SERIAL v0.21 .
Thanx !
me too
salaam
1)i have a hw6515c my language is arabic and i want to change it to english but i can't find arabic rom please help me???
2)can i download wm2003 us or uk and install it on my hw6515c???
if your answer is yes please guide me ...
thanks ...
thanks for the perfect guide!
I changed the language of my 6515 from WWE in to Italian
now I've only question, I can flash the full Italian rom after this operation?
Hi, I got one Treo At&t 750 English and I need to change it to spanish any help pls what can I do tks for your help...
find a spanish rom like http://palmone.r3h.net/downloads.palm.com/Treo750_2_23_ROW_ES_DesktopUpdater.zip
extract cheeimg_fw.nbh from archive (winrar), rename to cheeimg.nbh and use sd method for upgrading/flashing
enjoy
Hi, can u explait more cos I unziped the file Treo750_2_23_ROW_ES_DesktopUpdater I dont find the file u told about it..pls
tks
Hi, I did it..tks for your help...tks
Hi,
let's keep the rom development topic in here. Here is my romkitchen, from kaiserkitchen 0.3. There is no flash utility, but you can use customruu for that.
The included rom is a base for localisation, or customisation. Click on first step (prepare), make your changes, then click on step 2 (cook). You have a Signed_RUU ready for flashing.
In my experience, it is best to delete the RUU_Signed before creating a new one
Also, the custom ruu will not flash the new rom if you do not change the folder between each flashing on vista. I use a name identation (folder1 then folder2, etc...)
Happy cooking. Please use this to help finding stuff about drivers
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
thank you.
thaihugo said:
Hi,
let's keep the rom development topic in here. Here is my romkitchen, from kaiserkitchen 0.3. There is no flash utility, but you can use customruu for that.
The included rom is a base for localisation, or customisation. Click on first step (prepare), make your changes, then click on step 2 (cook). You have a Signed_RUU ready for flashing.
In my experience, it is best to delete the RUU_Signed before creating a new one
Also, the custom ruu will not flash the new rom if you do not change the folder between each flashing on vista. I use a name identation (folder1 then folder2, etc...)
Happy cooking. Please use this to help finding stuff about drivers
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
Click to expand...
Click to collapse
Hi
Thank you very much.
Ram
Thank you for your hard work and dedication we put it. Best regards
thaihugo said:
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
Click to expand...
Click to collapse
you mean that we have to extract sys folder from RUU_Signed.nbh file... then execute greloc and take note of the value... then copy files in the sys folder like OEMAPPS and OEMDrivers... and when we finish adding files in the sys folder... before we execute cook process and NBHutils we have to run the greloc again and reinsert the previous values... then click doit! in the greloc?
davidgreen said:
you mean that we have to extract sys folder from RUU_Signed.nbh file... then execute greloc and take note of the value... then copy files in the sys folder like OEMAPPS and OEMDrivers... and when we finish adding files in the sys folder... before we execute cook process and NBHutils we have to run the greloc again and reinsert the previous values... then click doit! in the greloc?
Click to expand...
Click to collapse
Make sure you keep your langugage specific folders intact.
Thanks
Ram
G'Reloc Situation
thaihugo said:
Hi,
Warning: you cannot add or remove from sys folder without doing a greloc. DO it before doing anything. Notge the value, then relaunch it when you added or removed something. Put back previous value then click on go!
http://rapidshare.com/files/142122071/shiftkitchen.rar.html
Click to expand...
Click to collapse
Hi thaihugo
My G'Reloc posts the same numbers always before and after, and strangely they are same for kaiser and SnapVUE. Am I doing anything wrong there?
Slot 0: 01F90000
Slot 1: 03DD0000
Size of ROM: 83400000
Unknown: 00000000
These are the numbers I have seen in ImageInfo.txt under .VM folder in SYS
Thanks
Ram
Most of the time, greloc sees the same numbers, but is needed for the few DLL's you have added. So even if you (as me) get the same number everytime, just run it to make sure everything is in place.
If you put say a full sys from another device, you will get slightly different numbers. You will have to put back the value you posted here in that case.
Morality: If you add any dll folder or exe folder in the SYS folder (not a simple dll or exe), do a preventive g'reloc before cooking.
thaihugo said:
Most of the time, greloc sees the same numbers, but is needed for the few DLL's you have added. So even if you (as me) get the same number everytime, just run it to make sure everything is in place.
If you put say a full sys from another device, you will get slightly different numbers. You will have to put back the value you posted here in that case.
Morality: If you add any dll folder or exe folder in the SYS folder (not a simple dll or exe), do a preventive g'reloc before cooking.
Click to expand...
Click to collapse
oh. Thank you
Ram
Help needed...
After all...i decided to cook my own rom...
Read alot , did everything i have read...
"cab oem" ing
"initflashfiles.dat" modification
but when it came to the end , buildos gives an error such as
The target file "temp\dump\mstscax.dll is a directory not a file"
Mind do wake me up for what i am missing ?
Safak
Help #2 for the noob
I have found out the problem about the previous tab... It was about wrong configuration of Remote Desktop...
I have overcome it but came a new one which is
Buildos gives this error
"Error building default.hv and user.hv"
and now , what ?
Help this poor lamer :-(
eh...
I ignored the latest error and have my own rom...and i m now flashing it to my Shift...
Will let yo know whn done...to be honest i m a little nervous about the result...
Urgent Help
I m in deep trouble...
I messed everything and now i m dead...Winmo side does not even boot...tell me what to do...tell me if there is a way to go back ?!?
how about flashing working rom to it?
omg
Recovered....thanks alot for your patience...
Average Joe
Hi guys,
I recently bought a HTC shift which SnapVue came out to be in Chinese, i really need to change the language and liberate it ASAP. I 've read so many replies on many different threads that i'm just completely confused right now. I barely understand all the technical words used out here. I need help please. Thank you.
What is the max size the rom can be?
I'm getting my Shift this week and I'm prepering for it with a cooked rom
EDIT: I saw that UDK's rom was 64mb in size so I know I'm safe if I'm within that limit
gullum said:
What is the max size the rom can be?
I'm getting my Shift this week and I'm prepering for it with a cooked rom
EDIT: I saw that UDK's rom was 64mb in size so I know I'm safe if I'm within that limit
Click to expand...
Click to collapse
Welcome Gullum.
64mb is the limit IMHO. Some NBH files over 50 mb have problems, and I have to reduce them.
thaihugo said:
Welcome Gullum.
64mb is the limit IMHO. Some NBH files over 50 mb have problems, and I have to reduce them.
Click to expand...
Click to collapse
ok first problem now ... I made my first atempt to flash a rom and now snap vue only gives a black screen what to do now?
edit maybe it should be added to first post that to recover from bad cooked flash then just flast the included rom
I now have a working own cooked rom on my shift just need to do some finetuning and I'll upload a rom for everyone to try... next step is to port a newer build.
i'm typing this on my snapvue side of my **** with opera mini
I have added some apps from blakstone and opal
google maps, rsshub, streaming media, calculator skined, thumbcal and some more
gullum said:
I now have a working own cooked rom on my shift just need to do some finetuning and I'll upload a rom for everyone to try... next step is to port a newer build.
i'm typing this on my snapvue side of my **** with opera mini
I have added some apps from blakstone and opal
google maps, rsshub, streaming media, calculator skined, thumbcal and some more
Click to expand...
Click to collapse
Hi
Can't wait. Could you check whether you are able to attach to audio to notes etc.
Thanks
Ram
hi all
i noticed most of us having this problem with imate spjas \ breeze
stuck at bootscreen and can startup the phone
i downloaded the original rom from
ftp://ftp.clubimate.com/
extracted it and took the nbh file renamed it to breeimg.nbh
copied it to SD card and camer+reset button
congratulations
where is every body... can any majestious senior or moderator help...
vodovodo said:
hi all
i noticed most of us having this problem with imate spjas \ breeze
stuck at bootscreen and can startup the phone
i downloaded the original rom from
ftp://ftp.clubimate.com/
extracted it and took the nbh file renamed it to breeimg.nbh
copied it to SD card and camer+reset button
congratulations
Click to expand...
Click to collapse
i"m pleased to know that you fixed your device, and thx that you shared with us your xperience, specially that no one seems to care for the members request in this forum even the moderator....
i dtried what you shared with us, but i couldn't repair my device, still stucked in the DAME windows mobile blue screen
hope i'll find an answer from the majestious members or senoirs or even moderator to repair my device....
i think the problem is there is the hardware diff. between spjas and mteor ! i dont know
do u have the imate ??? the one with the camera infront ?
vodovodo said:
i think the problem is there is the hardware diff. between spjas and mteor ! i dont know
do u have the imate ??? the one with the camera infront ?
Click to expand...
Click to collapse
yep that's it...
when i extracted the rom that i downloded from ftp imate club, and renamed the breeimg.nbh, i copied it to the memory card, i pressed cam+power botton, the device entered into bootloader, then marked checking for 15 to 20 sec
then NOT ALLOWED....
really i'm tired from trying to fix help.... euffffffffffffffffffffffffffff
just relax.... i felt the same and i couldnt think strainght too
lets take it step by step
1- make sure u formated the SD with FAT32
2- make sure to rename the nbh from the exe file "not the exe itself just right click and extract here if u have winace or winrar" to BREEIMG.nbh with cap. letters
try again and tell me what happened
helloooooooooooooooooo no one can help here, where are the professionel in the forum SOS HELPPPPPPPPPPPPpp!!!!!!!!!
vodovodo said:
just relax.... i felt the same and i couldnt think strainght too
lets take it step by step
1- make sure u formated the SD with FAT32
2- make sure to rename the nbh from the exe file "not the exe itself just right click and extract here if u have winace or winrar" to BREEIMG.nbh with cap. letters
try again and tell me what happened
Click to expand...
Click to collapse
nothing better,
when i did these steps, the device didn't even load or even the cheking word.
but when i tried to synchronize my device via active sync and install the rom the device started to install windows 1%... 2% and oupssss failed, the device turned off and restated....
just to let you kow on the 3 color screen (bootloader screen)
BREE100
IPL-0.90
REE100
SPL-1.09.0000
and i installed before this bootloader vrsion that i geted from a link mentionned to be installed before the BREE rus
really i dont know what to do...
but really thx for your help...
it seems you are the one who care in this forum...