Handnotes on X1: S.O.S! - XPERIA X1 Q&A, Help & Troubleshooting

I have been addicted to Handnotes; the ultimate handwriting note organizer tool with great built-in Outlook-like scheduling capabilities, but recently moved from my good old Jam to my dream gadget: the X1, which apparently didn't get along with my favorite app. ((
Symptoms:
writing by the stylus doesn't start immediately; one has to tap and hold for a while (approx. 2 sec) until it starts "inking", after that and so long as u keep holding the stylus you can continue drawing lines as normal, once you remove it you have to wait again, which makes dotting your words for instance unbearable.
I suspected that it had to do with the touch scrolling properties so I tested a few things like changing delay time or even deactivating scroll but in vein, if this is the real cause then disabling it for Handnotes only would be the perfect solution.
Great minds over there any bright ideas?

Use a task manager to disable background applications, such as touch apps. If it works when those are disabled, you could create a mortscript to enable/disable them.

Thanks pal for the instant response I disabled one process that I found related to scrolling but unfortunately this doesn't help the problem persists no matter what (
Please could anyone try out the software and tell me what's wrong?
It's Handnotes 3.6.1 (and all releases) from Choung Networks.
Appreciation in advance

Related

Unresolved Tilt Issues (Please Contribute)

Ongoing issues that need to be resolved - If you respond to any of these before you write any response PLEASE put the issue number at the top of your post, because this thread is going to get very large fast and this will help keep it somewhat organized, thanks.
#1: I have tried everything but can dump the time & battery icon off the title bar without alignment problems. Anybody find a key yet? Are we stuck creating new icon templates in black to save us from the alignment issue? Or has someone found a key to compensate the alingment loss from removing both time & battery status icons?
#2:Does Video Share work on the Tilt if you have an HTC ROM on it and are connecting with a Video Share enabled phone? (obviously this will only be applicable for people who live in the selected 3G networks for which Video Share is supported)
#3:When I make/recieve a call, and I try to access the top bar (start button) the top bar locks up. if I try a shortcut button to IE for example, IE loads but just says connecting... if I hangup the call, it redoes the 3G connection (it was 3G before I was on the call) and the IE works.
BUT the top bar is locked up. Start/3G icon, etc doesn't click. Only the "X" will work until I do a reboot.
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
#5
Is there a way to choose radio frequency besides using Bandswitch? Meaning the setting would show up in the Phone Settings menu that allows Band Selection. Perhaps there are some registry edits out there?
Here is a cab file that replaces "PhoneSettings.Dll" with the one from the Rogers Canada Tilt Rom. and enables the Band Tab. You will be required to reset your phone after installation.
#6
There have been issues regarding connecting to WEP encrypted networks...if anyone else knows of these issues and a possible fix, please contribute...whitelisting the MAC address on the router has already been attempted (and failed).
This post has been moved and temporarily stickied.
Please be sure to visit the Wiki. Most of your questions can be answered there regarding the Tilt.
The previous thread, "The thread to address ALL TILT-specific questions" has been unstuck, but can still be used if required.
Have fun!
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
kireol said:
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
Click to expand...
Click to collapse
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
GSLEON3 said:
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
Click to expand...
Click to collapse
errrrrr. If you flash the identical ROM on a TyTN II and a Tilt, how are the files in the windows directory any different?
I think you misread what I typed.
OK, after serching in many forums, i found that the problem is:
"When the device is protected by a password (Start/Settings/Lock), the start menu freezes after ending phone calls. In addition, the backlight turns off.
This only happens if the phone call is long enough (more than a few secs) for the display to turn off during the call. This is to prevent accidental button presses. When the phone call is ended the display should come back up, however, this is where bug seems to manifest itself. Somehow the password protection gets in the way and turns the display off and freezes the start menu.
The reason why this is serious (especially for business users) is that when you use MS exchange sync, many businesses enforce policies requiring a device password (common & recommended practice). This means that the option of turning the device password off does not exist. Therefore, using exchange sync (with security policies enforced) and making phone calls does not work."
So, acording to this, there are two solutions:
1º Sinple turn of pasword protection if you don't need it;
2º (found in modaco) Change a registry entry:
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplay DuringCall
From "1" to "0" will stop it but be warned if you arent using a headset then the touch sensitive screen will be in operation throughout the call so you may end up with your ear triggering applications etc...
cheers
HTC Kaiser QuickGPS Fix (Error solution)
Just import this .reg file into your Kaiser registry:
http://myego.cz/img/htc-kaiser/quickgps.reg
Nasty Camera
My phone works ok I guess and I am pleased with it. But I miss not being able to take photos with it. I used my TYTN all the time primarily as a mobile video station and a camera. But this KAISER is a complete mess when it comes to taking photos.
My point is, can someone tell me how to turn off the auto focus is thats the problem or does anyone have any idea how to speed up the lens to capture time. It takes forever to set its focus. Oh, and don't start me on video capture as that IS the joke of the century.
I can't believe what a step back this KAISER is in comparison to its older brother the TYTN. I expected this phone to at least take a moderate picture. Why on earth is the 2nd camera better (VGA) than the 3MP main camera. It is completely crazy.
I digress and am off to cry now.
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
ConcaveLiNkiN said:
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
Click to expand...
Click to collapse
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Hey, actually I have a problem synchronizing. I have been told that if a Kaiser is connected to a PC through Activesync, then the Kaiser could use the PC's Internet connection. And I think that is great, except mine won't. Instead my PC will try to use my Kaiser as a modem, even though it is already connected.... What can I do?
caulirick said:
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Click to expand...
Click to collapse
Hi caulirick,
thank you so much. That explains why, sometimes I see "reply" and sometime I see "view".
Again, thank you so much
Cheers
eRic
Doug2873 said:
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
Click to expand...
Click to collapse
DoubleLauncher also includes similar functionality, but with even more options:
single tap, double tap, single hold, double hold, triple tap - 5 combinations per button - HTC may be right that it isn't possible with vanilla windows, but it is obviously possible to code something.
wifi vs AT&T
Sorry for asking a question that I am sure was already addressed (unfortunately I cannot find it).
How do I instruct my AT&T Tilt (Kaiser) to try to connect using WiFi when it is present rather then connect using AT&T GPRS, 3G whatever?
When I bought my phone in October, I got advice from Howard Forum to go to your site (http://forum.xda-developers.com/att...22&d=1191864241) to get a cab file. I did that, and it worked.
I had to replace my phone which was defective, and now I wanted to get the same cab file for the new phone but the link no longer works.
Your advice and help will be very much appreciated. If you prefer you can send me a private message to [email protected].
upgrade??
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Scrog said:
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Click to expand...
Click to collapse
Well, the Video Rendering sucks. All in all though, I have to say I really like the device. It's okay out of the box, but after tinkering & tweaking I have to say that I'm glad I moved to the Kaiser. The GPS is solid for me & after changing my DNS settings to OpenDNS the internet is fast. I tether a lot & get great speed on my laptop (when in HSPDA or 3G). Yess, there are some issues, but I think it's the best device around. I've had no problems with my Tilt or my TYTN II. It works really well with our Blackberry server & I get my emails fater on my device than on my pc.
The only issue for me again is the video. But it's mostly a work device for me, so vide isn't a big deal. Besides TCPMP playback is good enough for catching up on my missed episodes of House MD.
I'd say go for it.
Hi all,
I wonder if this is even consider a problem or bug. At the Today screen, there will be times when you are overflow with schedules. Then a scroll bar will appear at the right most of the screen(as shown below left). The scroll bar stretch all the way from the top of the screen to the bottom of the screen. Is it possible to change it to such a way that the scroll bar starts from the bottom of the Today plug-in to the bottom of the screen(as shown bottom right). Please kindly advice if this can be done.
Thanx
Cheers
eRic
You can use HHC (home plug-in config) to lock the home plug in. Then the scroll is just at the bottom. There is a registry setting to do the same thing, but I don't know what it is. The HHC is a great utility as you can back up the plug in and change the fonts and icons too.
OpenDNS
GSLEON, where does one change DNS settings to the OpenDNS settings? Thanks.
What can I do???
Hello all,
I am on my second Tilt now (on AT&T network) but I am still having voice clarity issues. Very choppy conversations at times, even when connected to a landline, but there are always at least 2 signal bars & 3G displayed. I have tried to disable the data before making calls, but so far I have seen no improvement. Could Active sync have something to do W/ my problem? It always seems to be running. Also, I am using the stock AT&T rom.
Any input provided pertaining to my issue is greatly appreciated.
Tobe

New Pointui Home 1.02b released with native support for smartphones

Can somebody test it on s730? Share your exprerience! Seems to me that it could bring more free RAM, more battery life, speedy reaction
Many new features, f.e.:
* smartphones support
* new black skin
* battery saving
* bluetooth switching on/off during call (also battery saving)
* speed increasing
http://pointui.com
Works well..sometimes a little bit slowly.
I'd locked my S730 by this tool.
Can anyone tell me how to unlock this?
New Features:
Lock screen can now be used on smartphones - you press up then down on dpad.
Yea, I have been using this SW for some hours and i love it!
Has some minor bugs. I cannot keylock the unit as ususal.
Then the home program shuts down. So I have to use the keylock that is built inn to this SW..
But now that I am used to this, it is actually better that the standard.
It also bugs up some times when using Comm Manager, I have not yet figured out when exactly this problem accures,
but Home then sometimes shuts down, and I have to restart the program..
But other than that its perfect. Fast, smooth fading menues, and looks great!
Alcaline said:
Yea, I have been using this SW for some hours and i love it!
Has some minor bugs. I cannot keylock the unit as ususal.
Then the home program shuts down. So I have to use the keylock that is built inn to this SW..
But now that I am used to this, it is actually better that the standard.
But other than that its perfect. Fast, smooth fading menues, and looks great!
Click to expand...
Click to collapse
Thanks for your opinion, this SW little bit change the behavior of the HW, but according the programmer´s goal. The previous member contribution is typical, people does not like to read the manuals, sometimes problem is not problem it is a purpose how to use the HW effectively and users are lazy to read the changelogs .
rooomish said:
Thanks for your opinion, this SW little bit change the behavior of the HW, but according the programmer´s goal. The previous member contribution is typical, people does not like to read the manuals, sometimes problem is not problem it is a purpose how to use the HW effectively and users are lazy to read the changelogs .
Click to expand...
Click to collapse
I know what you mean
A little "Tip" if anyone wants to try this program on the S730.
I had to change the HTC Home settings "Time Out" to Never. Or else the it would go back to the original HTC Home after
10 minutes. (Depending on the settings)
Looks nice but too limited for my liking just yet.
Like, I want to be able to see the time AND appointments on the home screen, without having to scroll.
It should have more user-definable input, without having to get out a registry editor. It also needs some work to make it suitable for smartphones, like being able to add stuff to the icon bar on the home screen. Also, the application bar only shows icons in the Start Menu/Programs folder by default. I couldn't see any options to change it, or even a button to move back up the directory tree to where my icons actually are.
A working uninstall procedure would be good too!!
I agree with the mad ferret.
the customization is missing. for example where is the option to create a "favorite apps list"?
i really like its fast responsiveness!!! i wish windows mobile could develop something like that as native windows mobile software. so smooth and with such neat design. why cant they? are they ****ing retarded? instead we get slow menues and ugly lists like on phones of 1998. cant windows work with people wh o can create such amazing software and integrate it natively? cant they develop something like this themselfes? WTF
anyway, pointui is a very amazing piece of software. however, whenever i press "running programs" it freezes.... the update function doesnt work.
i prefer smarttoolkit!!
http://smarttoolkit.softonic.de/windowsmobile
Everything that's supposed to work with PointUI, works for me on my HTC S710/Vox. I do hope for more features and I am sure the developers are hard at work, but what it is now - it can only get better since it's amazing. I hope for it to run at system level, apart from that it's superb so far!
I've been using it for about a week now. I love the clean look, but I'm having one major issue. My number keys and my green key do nothing so I can't call any number that is not in my contacts without going back to the WM Home screen.
Anyone else have this problem? Or better yet, know how I can fix it?
But, yeah other than that I really like pointui. Hopefully the next release comes soon.

Summary Important Issues bout Diamond & Touchflo3D, [ UPDATED 17 June 2008 ]

First impression, EXTREMELY bad fingerprint magnet. I was expecting it to be like D810's fingerprint problem, but its much muh worse. However, the back cover seems to be a different kinda plastic glossy coating than D810, so i expect no peeling problems here.
Start up screen, after it install all necessary sys cabs, there's actually a short demo (video) on how to use the Touch interface. The old Touch didnt have that, justin writing in a manual..
The glass screen feels....like got some static attraction, so its totally not fun to scroll around with the finger. Well see how it is after putting on the screen protector
EDITED: Added Screenprotector, Touch feel is now MUCH better. Screenprotector is also of high quality. (thick and solid)
UPDATE on ICONS: Some games i insalled like Hexic and Warcraft 2, the icons in the start menu is totally screwed up, like, can see the shape of the icon, but not wat the icon is. It looks black and has strange lines. But not all games like this. Only some. I'm trying to figure out why. They're all meant for VGA. Hmm
Running the game once and performing a soft reset solves this problem.
UPDATE on TOUCH FLO 3D LAG: I've tried to mess around with Touch FLo 3D, see how much stress it can take. Handling it normally, placing my thumb at the bottom and moving it left to right, selecting what it want, and returning to the home screen, no problem at all. Now as you know besides sliding your thumb around, u can just CLICK it and what you want will appear. Example you're at TODAY screen, i click messages instead of susah go slide from TODAY to MESSAGES. Slight lag occurs when i do this (a tenth of a second? Probably loading time not really a "lag"). Now i tried ABUSING the system = Click on on messages, before messages load, i click Today, click Music, click Programs, click Internet, Click click click click. Basically i'm not letting ANYTHING load, just spamming clicks. A definite lag before what i last clicked finally appears on my screen (about 1- 1.5 seconds). Which is impressive, considering how i abused it like crazy. LOL. I honestly expected it to hang.
UPDATE ON MAPKING 2007: I have just tested it, and Mapking users will be glad to know that it supports the VGA screen on HTC Diamond, and GPS works flawlessly, despite worries that eGPS since its new, may not be recognized by Mapking
UPDATE ON CALL OF DUTY: Works absolutely awesome, NOT using minimal settings, i was able to play pretty well. NOTE: Tytn2 and Touch Cruise was NOT able to play due to heavy lag even with minimal settings. Game was perfectly fine, with except with just a small little, not lag, but looks like the rendering was a bit slow as i looked around, when i used hardkeys and stylus at the same time. NOTE: ALL pdas lag in gaming when using hardkeys and joystick at the same time. However, it was minimal, and call of duty was enjoyable to say the least. SO yes, it DOES have graphic accelerators. Proper benchmarks will be done when i have proper time.
UPDATE. SPB benchmark seems to hang. cant run it. hangs at testing word document.
UPDATE on Touch Flo 3D part 2: Download http://forum.xda-developers.com/attachment...42&d=1202399126, thanks to schap, and customize File system cache to 8mb and file system filter cache to 131072. This gives drastic improvements in Touch Flo 3D.
UPDATE ON BATTERY REVIEW : I did this test, based on what a student (like me) would probably use. More sms than calls. Here's a rough estimate.
TOTAL HOURS BEFORE KONKING OUT TOTALLY = approximately 9 hours, give or take
TOTAL SMS-ES = 120
TOTAL TALK TIME = approximately 15-20 mins
TOTAL LIGHT GAMING TIME (Hexic) = 45 mins.
Its actually pretty impressive.
My verdict is that with backlight on "auto adjust" and with the dimlight dimming within seconds after not being used, there is a HUGE amount of power saving from running the VGA screen. Also, it could be possible that with its graphic accelerators, gaming also consumed less power than usual.
My Touch Cruise same amount of usage above lasted 11-12 hours
IMPORTANT UPDATE (regarding black icons): It appears that the cause of our ugly black icons is not our VGA screen, but Touch Flo 3D itself. Looks like its a bit buggy. So we'll have to wait for a proper rom update regarding it (or perhaps someone can come up with a registry fix). Don't believe me? switch off your Touch Flo 3D, and soft reset your PDA. All icons should turn back to normal. Also, with Touch Flo 3D off, you can expect better battery life, as well as a significant increase in speed for your pda.
UPDATE HTC Touch FLO 3D, another bug: There appears to be memory leak issues with Touch Flo 3D. The longer u use the less ram u'll appear to have. Will have to wait for rom update to fix all these bugs
My Blog : http://heretical-rantings.blogspot.com/2008/06/htc-touch-diamond-user-review.html
IMPORTANT UPDATE (bluetooth stack problem): It appears that after using Bluetooth A2dp, your pda will have "vibration non stop" as well as phone totally mute problems. This is reported by other members in XDA. I'll run a check up on the latest 1.37 rom and see if this is fixed, as well as other issues. Stay tuned.
UPDATE ON ROM 1.37.707.1
Rom 1.37.707.1
BLACK ICONS PROBLEM: Unresolved <------- WTF MAN HTC!!
Bluetooth stack/mute problem : Pending testing
Memory Leak Issues: APPEARS SOLVED (doesnt go above 57% here, last time 70+%)
random problem where sms tone does not ring, but only rings when u wake up your phone, despite receiving it long before SOLVED. But device is still set not to wake up at incoming sms by default.
gimme 24 hours to test bluetooth stack/ sudden mute problem and memory leak issues
kudos on one of the few informative posts i have read on this new forum for touch diamond...
Nice summary.
Few questions.
1. COD - Can you please post your control settings here?
2. Do you know the actual registry change for changing the file system cache to 8mb and file system filter cache to 131072. I like to do this via registry. I couldnt find this info...
Thanks.
K
Nice summary Baronic, at least when i get my Diamond ill know what to look out for. Saying that, it could be that the UK spec Diamonds have been delayed because of these problems??. LAst i heard was that they were being held back because HTC wanted to apply a software update or something like that before they were released into the UK. Unless they are trying to stop us from hacking the phone ie cooked roms etc. I hope not or else i will be extremely angry as to why they would do such a thing.
@boinger, you're welcome
@Kraft, in COD there's a box to tick "low settings". I'm playing it with it unticked thats all. No other settings.
For reg edits, check http://forum.xda-developers.com/showthread.php?t=398265
@Spawn, I've no idea about UK sets, as i'm from Malaysia. However, here, we've just had a rom update yesterday, and i'll be flashing it tomorrow, and see if the main problem: Black icon and memory leak, has been solved.
I'll be updating my Blog, as well as here probably once i flash the new rom. I'll have to come up with a summary on the roms as well soon, which roms have the Touch Flo 3D problems. My blog is in my signature
Baronic;2307799
@Kraft said:
http://forum.xda-developers.com/showthread.php?t=398265[/url]
Click to expand...
Click to collapse
I was asking about control settings... What keys do u use... I find it hard to play without the keyboard ...
Also I am aware about the tweeking thread.
1. Boost TFL3D Performance --> Using Advanced Config, change File system cache to 8mb and file system filter cache to 131072
Click to expand...
Click to collapse
I asked if you know the actual reg. change ...
K
I use:
Top left aim, top right stance, btm left swap weapon, btm right reload.
volume down key, "use"
Volume up key, pause, i would change stance button to grenade if i see fit.
actual reg edit? nope, i didnt bother to really explore and find out
I use:
Top left aim, top right stance, btm left swap weapon, btm right reload.
volume down key, "use"
Volume up key, pause, i would change stance button to grenade if i see fit.
actual reg edit? nope, i didnt bother to really explore and find out
Baronic said:
@boinger, you're welcome
@Spawn, I've no idea about UK sets, as i'm from Malaysia. However, here, we've just had a rom update yesterday, and i'll be flashing it tomorrow, and see if the main problem: Black icon and memory leak, has been solved.
Click to expand...
Click to collapse
You already have a ROM update, did you find that on the HTC website in the HTC e-club? I just checked out the Hong KONG HTC region site and it has no ROM updates.
A question: doesn't the screen protector blur the display and therefore ruin the hi res of the device?
@save ferris, no, HTC doesnt seem to have the rom update, i'm going directly to the distributer for the rom update. though owners who bought their Touch DIamond today/yesterday would already have that update.
@pedmomd, no it doesnt blur the screen at all. its a clear screen protector
IMPORTANT UPDATE (bluetooth stack problem): It appears that after using Bluetooth A2dp, your pda will have "vibration non stop" as well as phone totally mute problems. This is reported by other members in XDA. I'll run a check up on the latest 1.37 rom and see if this is fixed, as well as other issues. Stay tuned.
Rom 1.37.707.1
BLACK ICONS PROBLEM: Unresolved <------- WTF MAN HTC!!
Bluetooth stack/mute problem : Pending testing
Memory Leak Issues: Pending testing
random problem where sms tone does not ring, but only rings when u wake up your phone, despite receiving it long before SOLVED. But device is still set not to wake up at incoming sms by default.
Baronic said:
BLACK ICONS PROBLEM: Unresolved <------- WTF MAN HTC!!
Bluetooth stack/mute problem : Pending testing
Memory Leak Issues: Pending testing
Click to expand...
Click to collapse
agree on the mute phone after using the bluetooth
pedmond said:
A question: doesn't the screen protector blur the display and therefore ruin the hi res of the device?
Click to expand...
Click to collapse
No. Its quite ok actualy...
But makes the Touchflow3D unusable for me... So I removed it....
K
keevy17 said:
agree on the mute phone after using the bluetooth
Click to expand...
Click to collapse
maybe i did not understand the problem....but:
1. i put some music to play with my coreplayer and bt headphones.
2. after a few minutes i asked my little girl to call me from my home phone. the music stopped, i pushed the headphones button and was able to have a conversation.
3. hanged-up the call and the music start playing again.
4. repeated twice. everything OK!
is this the right experiment for your problem???
kukiriku, u must use HTC Player only to duplicate the problem
Can we have a dump of that latest rom plz ?
Baronic said:
Rom 1.37.707.1
BLACK ICONS PROBLEM: Unresolved <------- WTF MAN HTC!!
Bluetooth stack/mute problem : Pending testing
Memory Leak Issues: Pending testing
random problem where sms tone does not ring, but only rings when u wake up your phone, despite receiving it long before SOLVED. But device is still set not to wake up at incoming sms by default.
Click to expand...
Click to collapse
Baronic said:
kukiriku, u must use HTC Player only to duplicate the problem
Click to expand...
Click to collapse
aaaahaaa...i thought you are blaiming the a2dp....OK, i'll test the htc player.
great post dude..
one more bug is
when using audio booster, after a while/charging or phone call, music played would be bassless.
Ways to fix it is to plug the headset in, disable audio booster, unplug and replug in the headset.

[APP] G-Sensor Based touchscreen Locker 0.1.0.10 (Beta)

After a month and a half with the TP, I really wanted a better locker. One that would if the phone were in a given position would lock the phone if I forgot to. I can't count the number of times that I made "Case calls" becuase my phone resumed while in my belt pouch. This application works much better for me than the others out there.
I am still working on the UI (it's a bit plain Jane at the moment, but before I clean up the look I'd really like to get some feedback on the application and Ideas for the final "look" of the application.
Here is version 0.1.0.10. the First stable public Beta.
Once G-Locker is loaded, if you turn the phone in a specific direction the locker will engage. Then with a "flick" of the wrist in the correct direction, it will unlock.
The initial defaults are:
To Lock: Turn the phone with either long side facing down (or gently flick to the side).
To Unlock: "Flick" the phone in a side to side direction.
To adjust the settings lock the phone then press the Settings Button (You have access to the button for 5 seconds before it disables)
Available settings:
Locking Direction
Unlocking Gesture
Locking Sensitivity (gives some control over phone angle required to lock)
Unlocking Sensitivity (Controls the acceleration force required to unlock)
Number of Seconds to wait before checking to relock the phone
Options to:
Lock the Phone on Suspend
Check if the phone should be locked on Resume
AutoStart (NOT IMPLEMENT AT THIS TIME)
Lock the Panel when Starting G-Locker
(sorry no documentation yet, it will be included in the next release.)
Great, let me try a couple hours and i will post some feedbacks later.
Thanks for your effort!
I'm trying it as well. But isn't it the same as sensorlock?
pandaboyy said:
I'm trying it as well. But isn't it the same as sensorlock?
Click to expand...
Click to collapse
Mhm. But sensorlock developement ended. So I suppose it's best to continue it Althought I use TouchLockPro.
it's not work for me at all When i start it nothing happens
Device: Touch Pro
Kraize said:
Mhm. But sensorlock developement ended. So I suppose it's best to continue it Althought I use TouchLockPro.
Click to expand...
Click to collapse
The software confused me... It only locks my taskbar and I really don't know how to unlock it. So I simply uninstall it (because my screen wasn't lock)
Between SensorLock and TouchLockPro, I prefer SensorLock, because it's more simple. If i can program, i would just go with SensorLock and add the option of light sensor lock and it will be a perfect software.
Eh. SensorLock didn't do it for me. I'd rather use TouchProLock because I just have to tap the center button 3 times to unlock it . I actually have PocketShield + TouchLock Pro. It replaced S2U2 + SensorLock. I don't use PocketShield as a lock really, more as a screen saver since it's simple and has notifications. It's easier for me to look at when I'm just checking my phone to see if I missed something.
Actually the Old adage "he who hesitates is lost" fits real well here. I started this project about 7 weeks ago (when I couldn't find anything on google regarding a sensor based locker). Unfortunately it sat on the back burner for the past 5 weeks while I worked on hunting down the power and heating issues I was having. Then I never really bothered to do another Google search (until today) seems there are a number of these out there. I have looked at sensorlock today, It is very configurable, but not really what I am looking for (More of If the phone is in a given position then lock it, I'll have to look at touch lock pro. At this point though I'm inclined to drop this project unless I really can't find something else that works (no need reinventing the wheel any further!)
(BTW, I disabled the full lock rountine (except for the taskbar) for the beta version so I would not have to do a soft reset ever time something didn't work correctly)
Should I decide to resume development, I'll post here then. Thanks for those that took a look at it.
Sensorlock is no longer developed and is not at all perfect, il'd use this over sensorlock if there was an option to only lock the touch screen on wakeup from call, which is broken in sensorlock
Dude! If only this could be integrated with TouchLockPro!!! I'd love you both! Might want t have a talk with ZuinigeRijder. He releases the source for TouchLockPro also. I really think that GLocker + TouchLockPro = best locker for g-sen phones on xda-dev
Love ur Tool
Hey ive testet your Tool!
Worked great for me! keep on your development please!!
this app sounds REAL promising, il keep my eyes on the thread to see how it goes.
nice work!!
dear all...
i had install to my device but i had error... "This application requires a newer version of .NET compact framework"... my question is which version, because in my device had intalled "NETCFv2.wm.armv4i" .NET Version 2...???
please halp me...
i new in this device...
.NET v3.5 is available.
Look at this thread
i don´t know why, but i am not able to lock the phone.
i´ve startet glocker, but i can´t flick the phone to lock it. so please help me...
also the application restarts tf3d everytime i launch the .exe
G-Locker
the GLocker does not take effect on my Raphael
i have instaled it and also Microsoft .NET CF 3.5
do I miss something?
Tested on 6.5... Its working.
Gyrator
I'm using Gyrator for that ... you can assign actions to orientation and stylus status

Looking for light weight .exe which does nothing to temp disable S2U2

S2U2 is great app and I love it. But is kind of nagging while reading, or playing games etc. It keeps locking the screen. The locking can be prevented by populating exception list. But only 20 entries are allowed. Also I do not want to enter names of all the games (Specially G-Sensor) or GPS apps which do not require touch or keyboard.
I was thinking I can just enter one .exe in exception list and whenever I need to disable S2U2 temporarity, I can just invoke this app.
So which is the most light weight app which does not take resource ans CPU time. It may or may not do any thing and has to be .exe ?
Thanks
tahdor said:
S2U2 is great app and I love it. But is kind of nagging while reading, or playing games etc. It keeps locking the screen. The locking can be prevented by populating exception list. But only 20 entries are allowed. Also I do not want to enter names of all the games (Specially G-Sensor) or GPS apps which do not require touch or keyboard.
I was thinking I can just enter one .exe in exception list and whenever I need to disable S2U2 temporarity, I can just invoke this app.
So which is the most light weight app which does not take resource ans CPU time. It may or may not do any thing and has to be .exe ?
Thanks
Click to expand...
Click to collapse
Try this. it does what it's called: DoNothing.exe.
Got it from PPCKitchen.
dwizzy130
Thanks for quick reply and excelent idea. But unfortunately my requirements were incomplete :-(. Isn't it true for many software. They do exactly what requirements want, but are still not useful as some key requirements were missing.
Now I found that S2U2 may be disabled, but the power settings (backlight off, and then power off) kicks in. Though S2U2 doesn't kick in, but backlight goes off, then power is turned off, turning off speaker, GPS etc.
So now, I need app which does nothing but keeps backlight on and also the power on. There are some app which can do this like gpsVP. But I want light weight donothing which can keep backlight also on.
Edit: I found one here http://pda.jasnapaka.com/plamp/
Any more ?
Thanks.

Categories

Resources