Help! Digitizer broken and phone is locked! - Tilt, TyTN II, MDA Vario III General

I broke my digitizer a couple months back on a carnival ride and hand to replace it. It was a pain in the ass picking off bits of broken glass off the LCD. Anyway it worked great but it got broke again! Don't know how. Huge spider cracks in the middle. We'll for some reason the phone has locked the hardware keys, and key board and requires a swipe of the stylus to unlock the phone. I'm running a TPC Elite rom not sure which version. I can not answer any phone calls or anything the phone is basicly a brick to me. I leave On a ski in 3 days and I need to have a phone for obvious safety reasons. No time to get a new digitizer off ebay. This same thing happened before when it broke the first time and I some how fixed it by resetting it.
Can any one help me?

You should be able to perform a hard reset of the ROM (see the how to sticky for how to do this) which would get you back in.
Sounds like you need to keep your phone in an impact-proof box XD

Related

Hardware Problem What do I replace

I recently purchased some housing and screens for 3 Tilts I am planning on putting up on ebay. The phone with the problem was my original tilt that was sent back for a warranty repair but in transit the carrier ran it over with a truck or something. It came back with tire marks on the package. Needless to say this caused some trouble with the ATT warranty people. After it sat in my garage for a year I pulled it out.
Every thing seems to work now except for the touch on the screen. I know it is not the screen itself ( I installed it in another phone and it works). I have hard reset flashed and taken it apart various times. Nothing.
The new symptom is that i found out if I push really hard on the buttons on the front of the phone I can get the touch function to work for a second or two.
I want to know what part should I be buying. Do I need to buy the whole ribbon connector that twists itself from the front of the phone to the back or am I missing something else all together.

Screen goes black when I slide out keyboard

My Xperia is messed up....
Has NO damage... No water damage, hasnt been dropped, overheated or anything...
Last night I was going to respond to a text and slid out the keyboard and the screen went blue... okay...weird... slid it back, still blue. So I restarted it. Heard the "ding" for the power off button. Turned it off. Turned it back on. Started to respond again. Slid it out... No blue screen, just had black and white lines, then went black, but it would never come back to the regular screen.
I have NO idea what triggered this. NONE. I've had no problems with my phone whatsoever.
What I've dont to try and fix it:
-Turn it on and off (obviously, to get the screen back on)
-battery pull
-sim pull
-hard reset
I bought the phone off of EBay. Has no warranty. I got a warranty with Squaretrade for my fiance's cell phone and when he needed to make a claim (it would power off when it was clammed shut...no damage to it. Also you couldnt hear out of the phone at all)) they said they couldnt do anything. I decided that was worthless and that I'm not going to get a warranty with them. Smart move not getting one period, but Ive had bad expierences with them anyways...
What else can I do? I'm @ a total loss... I don't know what else I can do since I've dont the hard reset. I'm trying to avoid taking it to a cell phone repair place b/c I have a hard time trusing people with electronics now (long story) unless I know you.
Thanks for reading and helping if you can!!
​
Erinc2005 said:
My Xperia is messed up....
Has NO damage... No water damage, hasnt been dropped, overheated or anything...
Last night I was going to respond to a text and slid out the keyboard and the screen went blue... okay...weird... slid it back, still blue. So I restarted it. Heard the "ding" for the power off button. Turned it off. Turned it back on. Started to respond again. Slid it out... No blue screen, just had black and white lines, then went black, but it would never come back to the regular screen.
I have NO idea what triggered this. NONE. I've had no problems with my phone whatsoever.
What I've dont to try and fix it:
-Turn it on and off (obviously, to get the screen back on)
-battery pull
-sim pull
-hard reset
I bought the phone off of EBay. Has no warranty. I got a warranty with Squaretrade for my fiance's cell phone and when he needed to make a claim (it would power off when it was clammed shut...no damage to it. Also you couldnt hear out of the phone at all)) they said they couldnt do anything. I decided that was worthless and that I'm not going to get a warranty with them. Smart move not getting one period, but Ive had bad expierences with them anyways...
What else can I do? I'm @ a total loss... I don't know what else I can do since I've dont the hard reset. I'm trying to avoid taking it to a cell phone repair place b/c I have a hard time trusing people with electronics now (long story) unless I know you.
Thanks for reading and helping if you can!!
​
Click to expand...
Click to collapse
Search the forum?
All I can find is if the screen is already dead or whatnot....I've already searched before I posted. I didnt want to post a worthless thread.
how long have you own the phone..?
and what rom do you use?...
Arju007 said:
how long have you own the phone..?
and what rom do you use?...
Click to expand...
Click to collapse
Since about March of this year, and ROM--WM 6.1
Go to the service centre and maybe ask them to quote a price, i had this problem
dadeadman said:
Go to the service centre and maybe ask them to quote a price, i had this problem
Click to expand...
Click to collapse
Did yours just happen for no reason?...Out of the blue?
I have this problem on one of mine also....it appears the flexribbon has gone bad...lcd is good....but when the keyboard slides out the screen goes black...tried another board and lcd in the phone problem still persists...this only leaves the ribbon as the culprit.
Regards,
WC
Wild Child said:
I have this problem on one of mine also....it appears the flexribbon has gone bad...lcd is good....but when the keyboard slides out the screen goes black...tried another board and lcd in the phone problem still persists...this only leaves the ribbon as the culprit.
Regards,
WC
Click to expand...
Click to collapse
Ill be sure to tell the people @ the service center what the problem could be. That helps alot. Upsets me that I had to do a hard reset for no reason and mess my phone all up, oh well!
Erinc2005 said:
Did yours just happen for no reason?...Out of the blue?
Click to expand...
Click to collapse
Yup out of the blue
same problem here wildchild is correct its the rigid flex ribbon. unfortunately it will take a month before the parts arrive since its not readily available at Sony Ericsson service centers...
Unfortunately i just got this problem yesterday.
Suddenly, when i slide out the keyboard, screen fades and goes black.
When i slide it back screen is still on but black.
To bring it back i just click power button twice to put it to sleep and wake it up again. I assume this is the same problem and the ribbon cable is loose, correct ??
I was thinking of following one of the disassembly vids to try and open it and make sure the cable is connected correctly.
What do you guys think ? Give it a shot or too risky?
I am not sure if the ribbon cable is damaged and am assuming its just loose because the screen works fine without the keyboard out.
Any advice would be appreciated.
P.S - had the xperia 3 weeks now, bought it used (about 6 months) with no warranty, Its X1i running Energyrom 3.0 (05/08) build.
A month?? Man, that's a long time... geeee wiz. I asked them asn they said about 7-10 busimess days, so we will see... but I trust it'll be about a month since you said they don't have the parts. I shipped it off Friday, put insurance on it, and said a prayer. I hate my Quickfire, its my backup phone... HATE, LOATHE.... DIEEEEE lol.
Ive been searching for other phones to replace this one if i continue to have other problems... but i cant find one I like. i Love WM, the QWERTY, and touch. Felt like i was send my child off to school or something.​
I was actually able to find the flex ribbons on ebay took 6 days to get them from china, bought two of them since I have 2 sitting here with the same exact issue....they were about 60 dollars a piece and are here already...will report back after I repair the phones....
Regards,
WC
hey man.. i got the same thing happened to my phone also.. slice keyboard out screen gose black... but phone is still running... why dont chu try the black card in ur box... give them a ring they should help u out... i bought my from ebay also... but lucky is a x1a so in melb which telstra sale it... check urs if is a x1a or not.. it should come with a warranty for 12 months... hope this can help...
I have this also, my pghone is 5 months old. Senrt it away and they didnt have parts. After 3 weeks Sony sent an exchange unit. Opened up the box but the exchange unit is broken! The optical pad doesnt work at all and when I make calls no one can hear me at all..
I had exactly the same problem, besides the regulary cracks
So ive send it in, and a week later ill got a new one. Even with a second battery lol.
The flex cable fixed my issue....so to confirm this is the issue....repaired mine this evening, working perfect, abit tricky to get it all apart but is doable....
Regards,
WC
I got my phone back from Sony on the 9th. They said there was a loose part. I sent it off on Aug 28, and got there on Sept 2, so it didnt take long at all like I thought it would. I was so tired of the other phone. Sad when a phone runs your life haha.
That was such a nice day...went and got fitted for contacts for the first time as well as a getting a new vision rx, came home with perfect vision and what was on my door step, my beloved X1i. I smiled sooooo big. I didnt expect it for a month! They said it should be 7-10 days at the service center though when I called them.
It was still under factory warranty, so I did'nt have to pay for the repair, but I sure would have paid if I had to... lol.
sigh having the same problem now
i used to be excited to put my treo 750 to sleep before when i changed to x1. but apparently i keep taking it out of the box again everytime i have to get my x1 repaired
i just got it back 2 weeks ago when i got fed up with the keyboard button problem.
now it seems i have to bring it back once again since the screen goes blank on me when i slide out the keyboard
hopefully they can fix it on the spot, maybe just a loose connection as compared to a broken ribbon.
was hoping to use the GPS when i go out of the country, paid and got the needed maps already. but i have only a week before i leave. hopefully itll get fixed by then

[Q] Broken Screen

Hi there, I know there are other threads on this, but I've got two questions;
I might be able to claim a repair on insurance - the policy doesn't state anything about rooting voiding it, but I'd want to play it safe and flash back the original RUU - now, the digitizer works on my phone, but the LCD is totally shot, can't read anything.
It's been a while since I flashed the RUU, so is there any point where you have to press a button or something on your phone to advance? is it possible to use ddms while flashing the RUU to see what you're doing?
Also, if I can't claim this on insurance, how hard is it to replace the screen yourself? I've seen a "genuine" (hmm.) LCD/tools set on ebay for about the same amount as my insurance excess, so this seems like it could work (if it's easy enough!).
Thanks!!
laughingcavalier said:
is it possible to use ddms while flashing the RUU to see what you're doing?
Also, if I can't claim this on insurance, how hard is it to replace the screen yourself? I've seen a "genuine" (hmm.) LCD/tools set on ebay for about the same amount as my insurance excess, so this seems like it could work (if it's easy enough!).
Thanks!!
Click to expand...
Click to collapse
I've not done it personally but I have seen the guys in the phone shops doing it.
It's not that hard, but you have to know what and where to remove. Just go slow first.
pardon this but what is ddms?
Hi,
I have flashed RUU for my Tattoo at least twice. And as far as i remember there is no point you have to do anything on your phone. It will reboot (into fastboot i think). You will se progress on computer screen.
By the way, how can the LCD be broken and the digitizer not? Is the lcd shattered?
This is against laws of physics!
Oh, maybe I got the letters wrong but ddms is part of the android sdk, so you can take screenshots on your computer - also handy if you've broken your screen and need to know where to press.
As for defying the laws of physics, I guess the Tattoo is more special than we thought! the lcd is showing up loads of black/white cracked patterns (but a small it at the bottom works, so I can just about make out my dock. )
Thanks, insurance guys seem to be a bit more helpful now, so hoepfully won't have to resort to doing it myself.
Just in case anyone else has this problem, found this nice photo-guide to unscrewing everything: http://translate.google.com/transla...acenter.ru/razborka/htc_tattoo/&prev=_t&twu=1
haven't got round to it yet, but should do after exams.
Thanks useful info.
I have opened and dismentled everything my tattoo 3-4 times refering the guidlines. It is really helpful.
I was trying to resolve a touch screen problem. My phone acted like something is always touching at a point of the screen, so, I couldnot able to select a thing correctly and it is worst while typing using screen keyboard. So, I disassembled my tattoo and clean everything inside and assembled again. It seems working correctly for few hours then the problem reoccurred. And I disassembled again and again.
Atlast, I found out the problem was just on the screen protector, I have removed it and resolved the problem. Funny problem but it is worth all those efforts.
Bad Digitiser
Recently the Digitiser of my phone went bad. I tried flashing back the Stock RUU but did not succeed since it was not able to detect my phone. Then I just flashed back the backup of the stock ROM and took it to the Service Center. To my surprise the person didn't even check whether the phone was rooted lr not. Since it was out of warranty I still had to pay I still had to pay $45.

[Help] Motorola Droid parts of touch screen unresponsive.

So basically I've had my Droid 1 since March of 2010, I LOVE my phone. Today I was out in the sun, and it just started freaking out, I put it on a table from my cool pocket for literally 4 minutes. Now two things are happening:
the soft key search button has stopped working(keyboard one still works), and the place where the back button is on my soft keyboard is borked.
Is there anything I can try/do to possibly attempt to fix the problem? I've never run into an issue like this before. :/
okay... so I gave it to my brother to look at and suddenly it's working again...
Is there anything that could cause this?
We don't really know what causes the touchscreen issue but we suspect that the moisture is the main problem. Also, a defective or improper charging or a bad flex cable can lead to something like that. I am facing exactly the same problem (paradoxally, after flashing a new ROM - coincidence maybe) but here it didn't dissappear. I will replace the digitizer. I think it's the only way to get rid of it. If it shows up again, I'm sorry!
When do you plan to change out your digitizer? If anything I'd love to see your results before I go for it.
Oh the joys of being a broke college student.
The same problem happened to my D1!! If it re-occurs then it means that your digitizer has broken. The only solution is to replace it or buy a new phone (If you do a search on "Droid" and "digitizer" you will find many people who have had this same problem)
I researched repair stores and finally settled on a place called Mission Repair in KS (missionrepair.com). Sent my precious Droid to them on a Tuesday and got it back as good as new on Friday for a cost (including Fedex) of around $90 - certainly a lot cheaper than a new phone.
Has been working fine again since.
I heard it is a common issue on the phone, you can use an application like multitouch visualizer (on the market) to check the functional parts of the screen.
The problem I have is with the keyboard, I was using the right key to pass the pages on kindle for android and now I have to press it harder, it also happened with one of the space buttons, thanks god those are 3...
Ends up I'm not entirely retarded, and got the extended warranty for 1.99 extra month. I traded it in, but the replacement has same issues. Might be time to upgrade my phone...
Try replacing Flex cable instead of digitizer.
If it's not damaged.. hold off on the digitalizer and cable replacement.. grab ya some descant packets (do not eat bags that come with new items that can't stand any moisture) ziplock it up with them.. with battery out of it.. leave it over night.. bam..
BRITT#OGDROID
Oh.. and the OG doesn't like sweaty pockets or extreme humidity.. it's definitely your problem if not damaged.. bet you're in the south..
BRITT#OGDROID

[Q] Screen - Hard Reset or new digitizer

Help/advice needed please?
My incredible S starting playing up with screen touches, didnt worry about it as it was sporadic. However I then lost the touch at the menu button, this prompted me to installMultitouch Vis Test and noticed that there was a double touch registration on the line up from the menu button. I then installed Screen Touch Test and this confirms there is a line from Menu button straight up the screen, as well as another line close to the left edge not registering any touch at all. The advice I am after is 1) is this a software issue as there is no visible damage, therefore do I go for a hard reset or 2)Is this a digitiser issue and do I go for a new digitiser (£50 from guy in the local shops or £15 of ebay and do it myself)
I have not rooted the rom the phone is all stock and not dropped or damaged it recently.
Cant be bothered with the pain of hard reset if I dont have to, but if it saves a digitiser I have no problem with that then. Equally dont want to get a new screen only to discover it needs a hard reset.
Thanks in advance.
Maybe you should try to boot into safe mode. You can do it by holding up or down volume button (don't remember which, try googling it) on boot when HTC splash screen appears (release power button first). This mode will start your phone without loading any application you installed. This way you can see if the issue is made by an application.
If it still don't work I would highly recommend doing hard reset. It is not that much complicated to reinstall after a hard reset. You can use an app like titanium backup to backup and then restore all your apps. I'm sure many people here can tell you that a hard reset is nothing because we are used to do it every time we flash a Rom and I for example do it at least 1 time a month.
Sent from my Incredible S using xda app-developers app
http://forum.xda-developers.com/showthread.php?t=1432289
Fixed screen, aftermath was damaged digitizer, however after a few days the digitizer kicked back in and worked fine. After a few month the screen became unusable. Long story short, I didn't replace the digitizer and it only got worse so I recommend that you replace it. If you do, I highly recommend getting the special tool for separating the glass and lcd from the housing.
Sent from my Incredible S using xda premium
Oh well very valuable lesson learned!! I bought a cheap £15 digitizer and tools from ebay and took time out on a saturday to replace it. First off the little tool to seperate the screens broke on first use...managed fine following the youtube videos. Separating the two screens was a bit tricky but eventually managed it. Then replaced the screen and connected/built it all back together. Switched it on and watched as it was obvious I had damaged the LCD, either during separation or putting it back together. There was no obvious damage but it was goosed.
Decided to take it to the local guy at the shopping centre with the little booth to see how much to replace both. Was quoted £80-85 and told it would be end of the week.....ah nearly a week without my smartphone! Got a text message on Monday lunchtime telling me its fixed and that would £70, got there and he only charged me £65. Phone display is better, phone is more responsive and less sluggish that it was before too, and this was without a hard reset. Very happy as was dreading a hard reset.
Lesson learned, dont attempt to replace screens on own, leave it to the guys that change about 30-40 each day.
I presume the sluggishness of the phone was related to the screen problems also. Was contemplating a new phone, but can hold off now until Windows Phones 8 get their act together and one of the manufacturers decide to make a phone that fits my needs.
Thanks for advice guys.

Categories

Resources