I have been connected to my wifi with original rom from Bell. Ever since I've flashed I can't connect to my wifi with WEP. I put in network key but what is the key index, it sees my network with good signal but wont connect. Do I check IEEEE 802.1 network access control. Smart card or certificate. The original rom was automatic once I put password in, now won't connect. Help!
Related
I cannot connect to wifi. It says connected and it says i have an IP address but i can't navigate to any webpages. I use WEP and have WM5. If I enter a wrong wep key it won't connect so i feel that i am actually connected to the network just my device isn't realizing it. Is there any manager like the cooked rom of 2003se where i could manually choose WLan as my option to connect to the internet. I have also tried turning off wep on my router and other settings like that. Changed in between connected to work or the internet. Any ideas?
I found the problem. for some reason it was trying to connect on my gprs proxt server. that would always deny the connection. I had to set up my GPRS as my work connection and a generic connection that connected to the internet and ONLY put this network connects to the internet. Also it only worked if i used the existing my work connection and didn't work if i created my own with the same settings..
All is now well in thw WM5 world.. no more resets!!! think this might be a bug though..
I just realized that this ONLY pertains to ATT GPRS settings because they are the only ones who need to set up a proxy server..
now that connections work with my wifi i have one problem and this occurs with GPRS also.. my connections seem to time out. I was trying to download about 50k of mail and after about 10 messages it says "Unable to connect to incoming mail server" I've been connected just fine.. then the connections fails.. i have to do it all over again..
My wifi connected no problem on older ROMS, now it will only connect with the security on my router disabled. If I try to set it to WPA or WEP, it finds the connection but won't connect. I don't really wont to turn off the security everytime I want to use my wifi.
I have a Belkin F5D7632-4 Wireless-G DSL router.
i have the same issue here, it say "connectin" but never connect.
But it does connect without the security? check your authentication method and make sure that what you have on your phone matches your router. I actually did this a while back, and it was driving me insane cause it wouldn't connect. Hope that helps you guys out.
Using WEP on a 802.11g and it works fine for me.
At first I didn't get any options to set the key but once the network was detected I was able to go into "network cards" and put in my key. Works fine with that.
I have lost the ability to connect to my Wi-Fi access point with SSID broadcast disabled after upgrading the ROM. With the original T-Mobile ROM my MDA could connect w/o any problems to the same access point. I can of course connect after enabling SSID broadcast but I'd rather not broadcast the SSID. WiFiFoFum can see the network regardless of the SSID broadcast setting.
Ideas..? Anything I'm missing..?
Solved:
Enable SSID broadcast on the access point, connect with the MDA to the access point, turn the MDA WiFi radio off, disable SSID broadcast on the access point. From this point on the MDA will connect to the same access point with the SSID broadcast disabled.
Another solution is to create the network connection manually in Settings/Network Cards. If you go this route, you don't need to turn on SSID broadcast on your AP.
3waygeek said:
Another solution is to create the network connection manually in Settings/Network Cards. If you go this route, you don't need to turn on SSID broadcast on your AP.
Click to expand...
Click to collapse
Thanx!
I know that and I did try it, but it wouldn't stick - it would say "available" then "connecting" and then revert to "unavailable." No idea why - the original T-Mobile USA ROM did work exactly the way you have described.
Same. I tried connecting continuously to my wifi network and couldn't till broadcasting was enabled. After I turned it off, it worked well too.
ePhonite said:
Thanx!
I know that and I did try it, but it wouldn't stick - it would say "available" then "connecting" and then revert to "unavailable." No idea why - the original T-Mobile USA ROM did work exactly the way you have described.
Click to expand...
Click to collapse
I bought a HTC tilt but I cant figure out the wifi settings. Its from the states, and its branded AT&T. THe phone itself is unlocked and ive been using it on the fido network for the past week. Everything works fine but i cant figure out how to get the wifi to work. It wont connect to the internet or my wireless network.
bumpppppppppppp
step1: turn wifi on via comm manager
step2: hit settings, wireless lan
step3: choose ur network from the list
step4: follow the settings and fill out the WEP key given by your network
step5: connect!
Same problem for me.
I have done eaxctly as described above but despite showing as connected the phone will not access the internet through wifi.
Same sort of thing here, using both standard t-mobile rom and newest HTC rom, my wireless connects, i get an ip from my router, but i am unaible to browse the web
in settings/wi-fi/network adapters/connects to:the internet
settings/connections/advanced/select networks/both options:my isp
also tried setting both options to "work"
any clues anyone?
click start, settings, connections, wlan, and change the power mode from battery to performance
Hi
First, I am rooted with superoneclick and on EC02. I replaced the wpa supplicant from an adhoc working cersion so I could upgrade to EC02. After successful upgrade to EC02, I then went back in and replaced the wpa supplicant file so I could connect to my AndroidTether, which works. I can connect to any other network as well as long as it is open etc.
The problem that I am having is that I cannot have WiFi auto switch to an open network, or my home network etc. I have to manually go in to WiFi settings and disable Wifi and then re-enable WiFi then select the network manually. All passwords are remembered for networks, I just do not have auto-switching capability. Before upgrading to EC02 via a guide here in XDA, my WiFi would auto-select an open network that was available and pass worded, when I would leave work my SGT would automatically switch to my home network WiFi. I have tried FXR WiFi fix and rescue and other apps to fix this but still have to choose manually to disable and re-enable WiFi or manually select a network. Also, even when a network that I was in range and connected to is still being held onto even when I am no longer in range of the network. WiFi won't automatically let go of the previously connected network.
Again, I have to disable WiFi and manually select a network to switch WiFi connectivity. Any help or suggestions would be welcome.
Verizon Samsung Galaxy Tab
Hardware version 1800.0.3
Model number SCH-1800
Firmware 2.2
Baseband version S:1800.0.3V.DL21
Kernel 2.6.32.9 [email protected]#3
Build number SCH-1800.EC02
Thank You