Related
Dear friendly XDA-Developer,
Three days back, I tried to upgrade my ASIA IIs radio from 1.02 to 1.12. It all went smoothly, but however, my IIs had been without signal and all it says is No Service. I've tried to search through the forums, but to no avail. Kindly please help... I'm at my wits end.
Thank you all!!!
Not sure were or what files you used, if they were type I or II, so I would just sugesst that you Reflash using the files of wiki.
Hi, thanks! I practically tried all the other radio roms for BA thats available on the ftp://xda-developers, but all give same results... Is it something to do with the radio rom or my phone?
You can't try all roms of the download site for they wont work unless you know what you are doing, (correct rom type ect).
Just make your life easy and go over wiki, download, read and install, its worked for many before you.
Read below this
Dear MDAIIIUser,
Like what you've said, I've read through the wiki BA guide, over and over again. I've followed throught the tutorial carefully and still, it didn't solve my problem.
I've some queries here:-
Firstly, if I use an incompatible radio version, would it affect my XDA IIs? I mean, I've successfully upgraded my CE Rom to 1.40 WWE previously and it worked flawless with cooked 1.40 Ext Rom, however, the moment I upgraded my radio rom, my phone feature cannot be utilised. It just says No Service. I've seen on the forum Asian users using Qtec 1.08 radio rom.
Secondly, my understanding on the Oper and WWE is that by setting them correctly with XDA3tools, I can then upgrade them to my XDA without facing any country code errors or such. But would it affect my XDA functionality?
Lastly, can you make any recommendations on which is the most appropriate CE/Radio ROM version I should use for my XDA IIs based on WWE & O2ASI001?
THanks a millions! Believe me, I've really tried very hard to get my IIs to work and have throughly read through the guide, but to no avail...
I recommend that you just download a FULL, fresh, 1.40 Shipped EXE (I recommend the I-Mate one) and upgrade with it.
Use the first method described here to upgrade.
Dear TheLastOne,
I'll try that now! I'll post the results after that.
Thanks a millions!
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
khngaroo
Could it be that your device is sim locked or that your sim card is no good?
Dear MDAIIIUser,
I believe that my SIM is not locked as I can make calls using the same SIM with another phone. When I insert my SIM card into my XDA, there wasn't any prompt or indication of my device being locked... Is there another way to verify that?
Thanks!
khngaroo said:
I've successfully flashed my XDA IIs with I-Mate shipped exe. All went smoothly, but the same problem persist. No service. I guess I can pronounce my IIs official dead... Sob Sob
Click to expand...
Click to collapse
Hi KHNGAROO... I am not an expers as TLO and MDAUser..but you can give a try downloading the 1.10 radio and downgrading your 1.40 istallation thet contains 1.12 radio to 1.10... I experienced a lot of problems on my device ( low signal or no signal) with the 1.40+1.12 radio combination..and I solved with hios trick..Dont know if can work for you..but maybe you can try..byez
khngaroo
The fact that you have no service would or could indercate that it is beining rejected by your network operator.
Alas, I have no Idea what message you get when a BA is locked to a sim.
(as in the provider has SIM locked your device so that you can only use it with that sim on his network).
The fact that you can use your sim in a different phone proves that the sim is not faulty however that does not verify if the Phone is sim locked.
Thus can you insert a sim from another device that you know that works into your BA and use it.
I have no idea what you had on the phone before you upgraded it nor if it worked, nor if you have also changed your sim so its just a bit hard to work out your probem.
At the moment it could be a locked device or a faulty instaltion of the radio rom.
You might have to go back to your Shipped version to verify if the device still works.
Then upgrade the OS only and check again
Then cook the Extromn to make sure you are not downgrading anything with the new 1.40 OS
Then upgrade the radio to a higher version 1.10 to verify if it works
The upgrade to 1.12 to prove or disprove vicer's very good suggestion.
Have fun
Be careful with the files that you use as you can't use Type I upgrade files to upgrade a Type II rom. Thus you will need to always download the files based on wiki and not reuse the old ones.
Dear MDAIIIUser,
I've flashed my original shipped asian rom back to my device. Got the SD bootable from my pal holding the same phone. Didn't work, still says No Service. I guess either my device is locked or the hardware is screwed.
Is there anything I can do to unlock my SIM on my XDA, should it be my XDA being locked. Or do I really have to bring it down to the service center to get the whole thing fixed?
Thanks a millions for all your help... Appreciated...
You still have not asnswerd the question of the sim. So I still dont know if it is the original sim or if you are using another on on a locked device.
So based on what I do know:
If you flashed the original Rom and have the correct sim and it does not work then your device needs to be sent back to the shop (which will be no problem as you have the original rom in it).
Wiki has a how to unlock (but like I said I dont know if that is your problem)
To all whom had helped me along the way (esp. MDAIIIUser & TheLastOne & vicer)
Brought my XDA IIs to Accord Dist and got it fixed. Now its back. I was told by the customer service operator that they had replaced the whole mainboard altogether. They didn't tell me what was the exact problem. Guess it was the hardware all along. But I was wondering, how on earth can flashing a ROM cause so much damage?
Therefore, here is a warning to those who wish to flash their XDAs, please do so only f you know what exactly you are doing. Please read wiki carefully before you try anything, or you might end up just like me, hee...
Well glad you solved your problem. There are a lot and I mean a lot of people that have been able to falsh thier device via this forum. But as you said you need to read and understand what you are doing.
So what rom do you have now and are you going to keep it?
(Not sure based on your sig)
Dear MDAIIIUser,
Weel, I've upgraded my CE rom to 1.40. However, I've decided to maintain my radio rom as it is (1.02), its kinda like once bitten twice shy. Quite sceptical that my IIs might end up in heaps again, lol.
Thanks again for all your help and concern.
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
TheLastOne said:
khngaroo, I'm glad all your problems have been fixed. If it is indeed a hardware problem, then you should not hesitate to upgrade your rom.
(Besides, if the problem returns, you know they'll fix it )
Click to expand...
Click to collapse
Dear TheLastOne,
I took your word for it and gave it another shot! Followed all the instructions found at WIKI and presto, it worked and now my IIs is running on 1.40 CE and 1.12 Radio.
Many, many, thanks to all of you who had helped along the way!
khngaroo
Great, Happy for you.
The 1.40 rom has a few issues that can be found on the wiki Upgrade page that you need to be aware of.
Hi All
I have a SPV M2000.One day the phone stopped working. Everything was all right, it did ask for pin but then didn't even looked for network,was immediately saying NO SERVICE. I tried few sim cards - the same.
So then I wanted to reinstall the ROM, I downloaded the official from Orange UK , tried to install it,and it shows ERROR 114, Radio Rom Upgrade Error.
And the phone now is in bootloader mode and I can't do anything!
I downloaded different ROM from xda-developers ,at the beggining with a country error, but i managed to fix it and now with this ROM it's the same thing. ERROR 114. I tried everything, hard,soft reset, Pc reset etc. Nothing works!PPC still in bootloader mode!
Please tell me if you know what else can I try!
Guys,come on,really noone knows???
Have you read WIKI? Follow the first method to flash your ROM. Have you remembered to plug in your power supply to your cradle when you flash your device?
Heres another thread on NO SERVICE Plz help... No Service after radio upgrade. Happened to me. Read it and see the advise by MDAIIIUser and TheLastOne. If all else fails, bring it to the shop.
I had a very similar problem....
First I tried to update a whole package that means rom, extended rom and radio
The radio update is always the first one and there always upgrade error 114 occured.
So I updated every part seperately and it works except the radio. So I tried alot but it just didn't work..even downgrading was impossible. MDAIIIuser and happy goat tried to help me as well as they could but nothing had an effect.
So I read in another forum that asus mainboards have some problemes with these radio updates....I thought they were joking...but I tried the radio pdate at another pc and it worked!
I know it sounds a bit stupid but I was desperate and at last it worked!
You can read it here :
http://forum.xda-developers.com/viewtopic.php?p=89657#89657
TRied that method.Doesn't work
Any other ideas?
One more thing.Is it normal that in bootloader mode when I plug the power cable in the charging LED is not working?it was working before.
The battery is charged ,but shouldn't it show that the power is connected anyway?
EDIT: this is a reply to the first answer.
So you think I should try on another PC?I will today!Hopefully it will work.
So I managed to install new rom on a different computer! I think that there was a problem with active sync.I used the one that was installed from my old XDAII.Could that be the reason?Now i installed the one provided with a M2000.
But it doesn't work anyway
Still NO SERVICE message.
ANy other ideas different than taking it to Orange?
Hi rottie,
No Service could mean anything. Could your SIM card be faulty? Device SIM locked? Or hardware faulty? You cannot just use any ROMs you find at ftp. Try to flash your device with full shipped rom at http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade. Use the first method and upgrade using MaUpgradeUt_noID.exe to bypass the Country code error. Remember that you'd need to run MaUpgradeUt_noID.exe twice.
Read wiki carefully, it has alot of precious information. Cheers ^^
Before you update any version you should be sure that your radio is
compatible with your device. Usually all radio upgrades should be
independent off the language of the device but as I understood (could be
wrong) there are differences because of the servicenetwork frequency.
So you must be sure that the chosen radio is compatible and that your
device is not simlocked.
So perhabs you should chose an upgrade of your provider.
But perhabs itis better not to risk your guarantee of your provider by
using updates or components of other providers! Because there could be
the possibility that your device is damaged and you should bring it back!
Good luck!
Guys, you get me wrong.I'm not trying anything what I'll find.
1)One of the ROMs that I tried and the one that I left now is a ROM downloaded from orange.co.uk for SPV M2000. So there can't be any incompatibility, don't you think?
2)I have 2 sim cards,both from Orange,I was using both of them before in my M2000 which is sold only through Orange so there can't be any simlock problem,don't you think?
3)I used only that orange ROM, original and the I-Mate one.None of them were working good,always NO SERVICE.
I bought the phone second hand,with box,all accessories etc. But I don't have a receipt :? And of course have lost the guy's number.That's why I want to try everything before going to the service.
I think this phone is network blocked, probably been reported damaged or stolen, once the insurance or replacement is issued a block is put on the imei of the phone that was subject to claim.
I recently attempted to update the ROM in my Cingular 8125. The process stopped at 95% and I received an "Internal Error". Now, when I turn on the phone, it gets as far as the color RUU screen, and nothing else.
How can I find out if I can repair this situation myself or if I need to take it back to Cingular.
Hopefully you'll give Cingular a little more info regarding this than you gave us.
My psychic advisor is STILL on vacation so I can be of very little help to you, sorry!
What ROM were you running before and what ROM were you trying to flash it with? Did you CID unlock before you flashed?
Sorry - When I posted the 1st message, I was in a hurry...
I am not sure what ROM version was on the device before I attempted to update (I know, I should have paid attention, but I was not). The phone was new from Cingular and I had not done anything else to it besides load a couple of apps (Skype & Agile).
I attempted to run the file RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe that I downloaded from the HTC site. The update go to 95% and I received the error "ERROR [326]: INVALID COMMAND" - This NBF file cannot be used for your PDA Phone. Please check your NBF file." (I have attached a screenshot of the error to this post).
I am not sure what to do at this point.
Thanks,
Chris
Some folks at the Cingular forum are having the same issue with no solution offered.
I'd suggest putting the device into bootloader mode (Holding Record and Camera buttons while soft reseting) and then reflashing. Make sure not to launch any programs while flashing. I also don't touch the device at all as I've noticed the USB connection might slightly disconnect.
Good luck and let us know what happens.
I just tried reloading from the bootloader screen - no luck. Exact same error at 95%. Would it work to try to reload an original earlier ROM? If so, how would I go about trying that?
Chris
I had this same problem.....I went to the cingular site after having the problem. Before installing I stopped all applications then soft reset.
THen after it boots up install the file from cingular. It worked from their site. Not sure what changed but I am not having any problems now with the new ROM.
I had this same problem.....I went to the cingular site after having the problem. Before installing I stopped all applications then soft reset.
THen after it boots up install the file from cingular. It worked from their site. Not sure what changed but I am not having any problems now with the new ROM.
I have re-downloaded the ROM file from the Cingular site (actually it just redirects to the HTC site). Same problem. I cannot get to the point to even shut down any programs because the phone OS does not even load at this point. When I do a soft reset, I get the following (sorry for the blurry image - as you can see my good phone with the good camera is dead...)
I had a similar problem. I posted the fix on another thread and ppl said i was wrong, this wasnt it...but heres what worked for me.
Are you using a usb port on the front of the computer? if so, try pluggin into the ports on the back of your computer. I tried flashing the official rom from cingular a few times using front port and it stopped at the exact same % each time. got the same thing as you, colored bars.
Someone had mentioned to me that front usb ports don't work as well as back ones. give it a try. good luck
from the picture, it looks you have the G4 chip(u can see 2.25 0001)
Thanks to everyone for their input. From the suggestions above, I have tried various USB ports on my laptop and I always get to the same point. I have also called HTC tech support and they are pretty sure I have bricked my phone. I talked to Cingular and they have agreed to replace it. I have also researched the G4 chip issues (looked at the post: http://forum.xda-developers.com/viewtopic.php?t=56408).
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
xtreme23 said:
from the picture, it looks you have the G4 chip(u can see 2.25 0001)
Click to expand...
Click to collapse
I second this observation! :shock:
This makes a major difference on wether or not you can even upgrade.
Search for G4 issues.
The .0001 in the IPS/SPL number will tell you which one you have.
The way I understand it is:
2.25 - G3
2.25.0001 - G4
I think this is the proper way to identify it.
slapper said:
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
Click to expand...
Click to collapse
Chris, LokiwizMSL ( http://forum.xda-developers.com/viewtopic.php?t=50768 ) can SIM Unlock your device. Be sure to read the instructions.
Well - Now I have a new problem. So far, Cingular is refusing to replace my phone - saying that the ROM upgrade voided the warantee. I am still fighting that, but just in case I loose, is there any way to get my phone fixed once it has been "bricked"?
slapper said:
Well - Now I have a new problem. So far, Cingular is refusing to replace my phone - saying that the ROM upgrade voided the warantee. I am still fighting that, but just in case I loose, is there any way to get my phone fixed once it has been "bricked"?
Click to expand...
Click to collapse
If you installed an unofficial ROM then they are correct. You should never admit that you used a ROM that was not provided by HTC.
There are warnings all over this site about VOIDing your warranty.
Since you used the Official Update they are wrong.
Same problem with official Cingular 8125 ROM
I tried to flash the official Cingular ROM from the HTC site here:
http://www.htcamerica.net/docs/RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship.exe
I got the same error at 95%:
"Error [326]: INVALID COMMAND This NBF file cannot be used for your PDA Phone. Please check your NBF file."
When I reset the phone I get the RGB bootloader screen and nothing else.
My phone is a G4 and was running ROM version 2.25.11.1 WWE before. The reason I tried to apply this ROM is because there was apparently no Extended ROM. None of the customization cabs executed on a hard reset. Also, in Device Information, there was no "ExtROM" listed.
This is the second phone that this has happened on. I thought the first time was just a fluke thing and I had a bad phone. But now I think there is an issue with this ROM.
Anyone have any idea what is going on here with this ROM? Does the fact that there was no Extended ROM have anything to do with this ROM not flashing properly?
Is there anything else to try or do I need to try to return the phone (AGAIN)?
how to fix the problem
read this thread carefully. The upgrade problem seems to be occuring on G4 chipped Wizards with the most current IPL/SPL.
http://forum.xda-developers.com/viewtopic.php?t=56088
take the official update. run it, when it finishes extracting look for the extracted NBF file in your
C:\Documents and Settings\yourusernamehere\Local Settings\Temp\the newest directory just made
find the NK.NBF file
extract it using the tutorial in the post above you will be flashing with the official cingular components sans IPL/SPL.
flash it and your are back up and running
I would have posted this earlier but i had to make sure it worked and was repeatable.
I think the problem with the new update is the new IPL/SPL version checking. It seems that if the patcher sees the same version already running it will give you that error at 95%. I've seen it on 3 phones already and I have been able to fix them by doing what i've told you above. You are already in bootloader mode and your phone is ready to accept a new rom anyways. My solution may not be the best for your phone and take no responsibilites but you are already desperate and need a fix. Good Luck!
Thanks for the reply, evilito. Since I hadn't gotten any replies for a few days, I decided to go ahead and try to exchange the phone at the Cingular store. They were baffled that this was the second phone I had returned for the exact same problem, but gave me a new phone anyway. I wish now that I had waited so that I could try evilito's solution to see if it works. As it is now, I am too scared to try any flashing on this new phone after my results with the first two. I would really hate to have to try to return a third phone
Can anyone else verify that there is a problem with the latest Cingular ROM when flashing a G4? Or did I really have two bad phones?
slapper said:
Now I have the following question - When I get my new phone (which I will assume will have the G4 chip as well), the Cingular rep told me that it will already have the latest 2.25.0001 ROM on it. What are my options at that point to SIM unlock my phone. Will I be able to? From the post I referenced above, it sounds like I may not be able to with the G4 chip.
Chris
Click to expand...
Click to collapse
Thats good to know, I thought that when we unlocked it and updated the ROM we lost Warentee Support. Where can you get the official Cingular 2.25 ROM. I am still on 2.17.
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
What operator are you on? All of the recent ROMs do not work on Orange UK. The phone and txt message functionality is broken.
As for not showing the ROM version, this always happens after a crash. Just reset again as soon as you see "NONE".
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
opps,thats all rom's since mid november
TEXT,PHONE BLUETOOTH WIFI.
Read The Wiki
NeCrOpHiLiCaT said:
i tried upgrading to wm2005 and it works fine as a pda and for satnav but dosent work as a phone, it will not get anysignal and when it lodsa sometimes in the corner it shows the a redio version other times it willl show just the rom, ive tried upgrading just the radio, ive tried upgrading it all, ive tried returning it to standadrd and it just wont accept anything? ant help anyone? i just want it back to standard.
Click to expand...
Click to collapse
not being funny, but there are a few pages in the Wiki that can help.
http://wiki.xda-developers.com/index.php?pagename=HTC_Blueangel_WM5_Home : explains all about WM5 on a BA
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5 Gives you STEP BY STEP instructions how to go back to 2003
NeCrOpHiLiCaT said:
come one people, 65 views and not one reply? someone must be able to help? i remember when this place used to be helpful.
Click to expand...
Click to collapse
Before you complain that users cant help you, try helping yourself. You will find that people are more willing to invest their time then!
realkinguk said:
am a bit lost here.
am on orange UK and evreything works ok with this rom.
just thought i point that out.
Click to expand...
Click to collapse
Wierd, you are the first to come forward to say that it works fine for you. Myself and a couple of other users haven't been able to get reliable telephony for months now. It may be a regional thing, perhaps only in Scotland. I've had replacement phones and I still have problems.
No one seems interested in helping as it's not something that can be easilly tested unless you have the problem yourself.
i was looking for hte downgrade link ill give that a go tomorrow, as tot he person that said i should try helping, how can i help if i dont know anything? we all need to learn and start somewhere. think ill be staying away from here with my spvm600 if thats the attitude this place is takeing.
Hey, it wasn't intended at you, obviously. What I was basically saying was that if you have the same problem, then don't expect a fix as it's a tough one to fix.
could it happen that you are one of those who downloaded the rom which someone had the gall to replace the original one? which rom upgrade did you use?
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
NeCrOpHiLiCaT said:
i cant remmeber what rom it was that i used now as it was about 2 months ago i done it, ive tried the downgrade link that was posted and when i open maupgrade it dosent see any rom on my device or any in the folder and when i click up grade it takes about 10 sconds then says tis done, which is obviously isnt dont, any mroe ideas please people?
Click to expand...
Click to collapse
use one of the latest (i.e. helmi's or xplode's) and upgrade again. be sure to follow the instructions (including that for device data, and the no/yes/yes input). make sure also you were able to download the whole file (it was a problem for some users).
you might also want to upgrade your radio version (1.15.00).
good luck.
Hello Everyone,
I know that is a very noob question, but I don't know anymore what to do.
I recently move to Germany and I bring my wizard (bought in Brazil) with me.
My device is CID and SIM unlocked and its running WM 6.1
The problem is, I never get signal!!
I already try all the available radios (2.19, 2.25, 2.69, 2.71 and etc..) and nothing happen!
someone knows if there anything to do for work?
I appreciate all the help.
Thanks in advanced.
no one? no ideias =/
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
-MyHTC- said:
None of the radios you list are from any of the O2 ROMs in the wiki.
Have you tried an O2 Radio?
Click to expand...
Click to collapse
i was not able to find it,
could you please send me a link, or tell me where i can find?
hope that work.
This Radio is from the O2 Xda Minis
And here is link to the ROM
danken schön!
i will try and report!
That is very strange!
i flash the radio and nothing happen.
I start to think that my device is SIM unlock again.
But the most strange is:
-I put a diferent SIM and my phone start normaly look for signal but couldn't find it.
-The Invalid SIM screen for type code don't show anymore
-When i read my device on Wizard service tool its show SIM LOCKED.
-But in Brazil i test other operator SIM a long time ago and works.
Any ideia?????
damed! i cannot find a solution...
anyone? any ideia?
I had the same Problem, I live in Germany and have the XDA mini S too, but it's a Vodafone SIM-Card inside. When I installed WM6 the Phone always got a bad connection to the network, and it took much longer even to connect than with the original GERMAN ROM from O2. I downloaded the original ROM from O2s german Website and flashed it with the tool which was in the downloaded file, I didn't extract it from the installer because my Phone was CID-locked. Then the Phone had very good connection again. Then I CID-unlocked it and flashed the newest release of TNT. I expected bad connection again but NO, the Phone behaves like with the original ROM.
XDA mini S german ROM:
http://www.o2online.de/nw/support/downloads/software/xda/older/xdaminis/index.html
My Phone is a G4, so I used this tool to unlock:
http://forum.xda-developers.com/showthread.php?t=332320
Then I flashed this ROM (Professional Edition):
http://forum.xda-developers.com/showthread.php?t=414518
I used ROMUpdateUtility_Wizard_NoID.zip for that:
http://forum.xda-developers.com/showthread.php?t=291215
Everything seems to be normal again. I described every detail because I am not really sure what the EXACT problem was because there are so many ways to do the same thing, but i don't know if every method REALLY DOES EXACTLY the same thing, if you know what i mean
wow! thats really strange! but i will try it!
i cannot beleave but works!!
thank you!