Related
Hi all,
Here's a strange one for you, my data connection on my phone was working fine since I've got it (since launch) but all of a sudden, over the last few days, it now can't stay alive for over a couple of hours. To be more precise, it does stay connected, but looses the ability to do anything, for example, active sync sits there "waiting for network" and opera sits there "looking for host" and I can't view anything. It works fine before then, then just suddenly stops. Anyone got any suggestions on what this could be? It's really annoying because it means that my emails suddenly don't get sent through, and I never know when it's stopped working unless I manually check.
Regards,
DragonStar
I got the exact same problem, the only thing I didn't do so far is a hard reset...
The weird thing is that it DOES WORK for lets say the weather plugin in the today screen, but IE, opera, nothing else works
I'm having this same issue with panosha's v2 rom. Weather works ok, but nothing else. I really need it for activesync, and that just comes back and tells me I have permission issues, yet when I soft reset, it works just fine.
Sounds like activesync is the culprit here. Are you using activesync when the data quits working? cause i've had lots of issues with activesync screwing up my data connection.
http://forum.xda-developers.com/showthread.php?t=360268
that is my response to how i get activesync to work and keep my computer connection separate from my phone's connection. If the problem described isn't the exact same thing i'm guessing that it something similar. i would suspect that somehow the settings in your network selection drop downs have been changed.
hope this will help in some way.
Guys,
I don't know if this is actually a cure yet, but it seems to have worked on my first attempt.
First the background...
When I first got my Kaiser (UK Orange Tytn II) I was at work, I quickly enabled the wifi and all was well. When I got back home later that day I really struggled to get a connection to my access point at home. I connect to a Cisco aironet in both locations (I know there is a post about cisco extensions but I know that is not my problem as I can and have connected to both APs on at least one occasion with no problem).
After deleting wireless settings and a few soft resets I was able to connect at home. I managed to use that wifi connection all night without a problem. Getting back into the office the next day resulted in the same problems connecting to the office access point.
The AP is visible and is 'Available' but doesn't connect automatically. I tried to establish the connection manually, the phone shows the AP as 'Connecting' but shortly after goes back to 'Available'.
I've tried flashing different roms and radios but to no avail.
Last night I got to thinking that I generally connect to my AP, browse the web, sync mail etc, but I don't switch off the wifi when I am finished. I just let the phone go into standby as that shuts the wifi off anyway. So to try something different last night, I disabled wifi once I had finished.
This morning, when I got into the office, I enabled wifi and for the first time it connected immediately and I'm browsing on it just fine. This leads me to believe that there is a problem when the wifi is enabled and the phone is is standby mode for a considerable length of time and then is woken up in a totally different location.
I'll test again tonight by disabling the wifi before I leave the office and hopefully I'll get an instant connection when I get home.
Any thoughts?
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
bluemamba said:
I get the same thing for work and cannt connect even though it says available, and then connected.
Tried your approach but didnt work for me.
Click to expand...
Click to collapse
Of course that might be due to any number of factors. Have you ever been able to connect at your office?
i've had issues with my orange (uk) tytnII actually wanting to make a GPRS connection whilst connected to WiFi when i try and go online.
I connect at work using a program called Odyssey and eventually got that working yesterday, but had to turn off most other connectivity before it'd actually use the WiFi.
then I was at a pub later on with a free wifi hot spot, but that wouldn't connect despite it being 'available'
YAY!
Well...
I retested my theory. Disabled the wireless before I left the office. Got home, enabled it and I connected with no issues.
So there is a problem with having the wifi on when the phone goes into standby and it then waking up in a totally different location.
I wonder if WM6.1 addresses this. I hope so because although I have a work around, its still a pain in the a$$
I had similar problems on my Wizard... never had anything like that on my Kaiser.
DarkDvr said:
I had similar problems on my Wizard... never had anything like that on my Kaiser.
Click to expand...
Click to collapse
Could you tell me what radio you are using?
foobar1977 said:
Could you tell me what radio you are using?
Click to expand...
Click to collapse
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
DarkDvr said:
ROM: DualTouch v3 (dutty's v3)
Radio: 1.27.11.31
No problems with it.. no missed calls, calls come through fine when I'm on HSDPA.. no wifi problems so far.
Click to expand...
Click to collapse
Thanks, I might give that a go when I get a chance.
My problem is similiar. If I connect to a certain access point, it will stop working after a minute or so and then not be able connect to that access point or any other one, they are just listed as available. Strange...
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Wi-fi connection
Hi unwired,
I've been surfing this site, but unable to find an answer yet, a newbie that I am. Is there a way to define one network as default? Anytime I want to connect, I have to do it manually, and define settins, rather than just switch it on, connect automatically and fire away. This is how it works on my laptop, or I have to high expectations from the Kaiser?
Thanks in advance.
unwired4 said:
Firstly set your wifi power to max.
Secondly, my orange Tytn2 (now dutty v3'd) has never had that problem.
I leave navizon on a lot of the time and thus enter and leave wifi zones frequently with wifi on and my device connects fine to the regular ones I use.
Click to expand...
Click to collapse
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
foobar1977 said:
This is nothing to do with power settings, or at least not for me or several other people I have spoken to. Its generally not a problem when the wifi is on, its after the device has gone into suspend.
I'll bet my bottom dollar that if I set the reg hack so the wifi is always on I wont have this problem but I can't deal with the battery drain.
Just this morning I was connected to my office wifi, went for lunch without switching off the wifi first and when I got back I was longer able to connect to the same access point.
I then deleted the settings for the access point, soft reset and I'm connected again (even if I switch to low power).
To say that this pi$$es me off is an understatement, what kind of wireless device cant handle waking up in a different location to the one it went to sleep in!?
Click to expand...
Click to collapse
I have had similar problems. I get disco'ed from my AP at home and it won't let me re-connect. Jut keeps asking for the WPA2 key.
I use the same remedy as you. Turn off Wifi Before walking out of range. No amount of Softreset's fix it for me.
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
P.S. This might also be tied to my router, cause a router reset fixes it for me. But i doubt work will let you try that
DaveShaw said:
Although, some ROM's work better than others. ie Alex's WM6 ROM would not connect at all, the ROM / Radio in my sig are perfect so far.
Click to expand...
Click to collapse
Yeah I'm really hoping that this is fixed in WM6.1 which, if your experience is anything to go by, might well be the case. I really wanted to wait for the official 6.1, but I feel a flash of Duttys 6.1 coming on real soon.
Hi Everyone,
First post here so hopefully you guys can help. Been doing a lot of reading of the site over the last few hours since I got my Diamond - looks great. Am usually very literate in these things but have always tended to be an S60 guy so now breaking into the WM world properly..
Anyway, there are two things I wanna run by you which I'm sure you guys may know..
1. Battery/3G
As we all know, the battery sucks.. There's no denying that. I refuse to switch from 3G to 2G though cos that spoils the object. I have already conceded by turning HSDPA off and am now on normal 3G as it is. One of the things that can't be good for the battery is that it connects to check emails and then stays connected.. Whereas the beauty of the iPhone for example is that if you tell it to poll your imap server every 15 mins, it connects, checks and downloads and the disconnects. It connects again another 15 mins later.
I've set my Diamond to poll every 30 mins in the hope that it would then disconnect once it has downloaded the emails rather than staying connected for hours and hours at a time to the internet even though it's only checking my email server every 30 mins or so.. you follow?
So, I downloaded Advanced Customisation and have turned off the Auto Attach feature.. But what it does is stop the Diamond auto connecting the first time.. but then once it's connected, it stays connected to the internet.
You follow me?
Basically, I want a way for the phone to disconnect from the net when it has checked for messages then reconnect when it's time to check automatically again. Rather than staying connected or me having to switch to a manual check. Is that possible guys? Maybe that will help with the battery.
2. GPS/Battery
Other thing I heard was that if you go into the GPS settings and change the program port from Port 4 to None, then it saves on battery life. Only downside is that you then have to fiddle with the settings before you fire up Tom Tom or Google Maps. Is there any truth that the phone is always looking for GPS satellites even when satnav software is not switched on.
3. ALARM
Oh actually - there is a third question.
Is there a way of having the phone on silent but alarm clock on so that I can sleep knowing I will be woken up by the alarm but NO phone calls. It's a basic thing in Symbian/Blackberry/S40 but seems to be missing on my Diamond?
Thanks all - i have googled and searched through the forums looking for answers to these questions but had no luck.. Hopefully you can post some answers.
Have a good day and thanks in advance
Phil
I'm pretty sure that just because it's connected ie. the E or 3G symbol on the signal strength bar. It doesn't pull extra juice, extra power is only required to transfer data and not to 'maintain' the connection.
if your area has great 3G connectivity, then you could set the phone to 3G only instead of auto, cause that's what usually saps the power, the phone constantly trying to find the best band when it's feels that the signal strength isn't good enough.
philliplavelle said:
3. ALARM
Oh actually - there is a third question.
Is there a way of having the phone on silent but alarm clock on so that I can sleep knowing I will be woken up by the alarm but NO phone calls. It's a basic thing in Symbian/Blackberry/S40 but seems to be missing on my Diamond?
Phil
Click to expand...
Click to collapse
you can just put the phone on flight mode. that way no one will bother you with phone calls. (not tried it but i think it will work)
marauderz said:
I'm pretty sure that just because it's connected ie. the E or 3G symbol on the signal strength bar. It doesn't pull extra juice, extra power is only required to transfer data and not to 'maintain' the connection.
if your area has great 3G connectivity, then you could set the phone to 3G only instead of auto, cause that's what usually saps the power, the phone constantly trying to find the best band when it's feels that the signal strength isn't good enough.
Click to expand...
Click to collapse
Hi
BTW, to set to 3G only, is it UMTS(800+2100) or UMTS(1700) in the UK?
Cheers
Sorry i'm from MAlaysia so I wouldn't know your settings. But in anycase you can leave that at AUTO. Just force it to UMTS instead of GSM or AUTO
firedup said:
Hi
BTW, to set to 3G only, is it UMTS(800+2100) or UMTS(1700) in the UK?
Cheers
Click to expand...
Click to collapse
UMTS in the UK is 2100.
So 900+2100 i suppose
govnah said:
you can just put the phone on flight mode. that way no one will bother you with phone calls. (not tried it but i think it will work)
Click to expand...
Click to collapse
This definitely works. I do it every night before going to sleep
philliplavelle said:
Hi Everyone,
First post here so hopefully you guys can help. Been doing a lot of reading of the site over the last few hours since I got my Diamond - looks great. Am usually very literate in these things but have always tended to be an S60 guy so now breaking into the WM world properly..
Anyway, there are two things I wanna run by you which I'm sure you guys may know..
1. Battery/3G
As we all know, the battery sucks.. There's no denying that. I refuse to switch from 3G to 2G though cos that spoils the object. I have already conceded by turning HSDPA off and am now on normal 3G as it is. One of the things that can't be good for the battery is that it connects to check emails and then stays connected.. Whereas the beauty of the iPhone for example is that if you tell it to poll your imap server every 15 mins, it connects, checks and downloads and the disconnects. It connects again another 15 mins later.
I've set my Diamond to poll every 30 mins in the hope that it would then disconnect once it has downloaded the emails rather than staying connected for hours and hours at a time to the internet even though it's only checking my email server every 30 mins or so.. you follow?
So, I downloaded Advanced Customisation and have turned off the Auto Attach feature.. But what it does is stop the Diamond auto connecting the first time.. but then once it's connected, it stays connected to the internet.
You follow me?
Basically, I want a way for the phone to disconnect from the net when it has checked for messages then reconnect when it's time to check automatically again. Rather than staying connected or me having to switch to a manual check. Is that possible guys? Maybe that will help with the battery.
2. GPS/Battery
Other thing I heard was that if you go into the GPS settings and change the program port from Port 4 to None, then it saves on battery life. Only downside is that you then have to fiddle with the settings before you fire up Tom Tom or Google Maps. Is there any truth that the phone is always looking for GPS satellites even when satnav software is not switched on.
3. ALARM
Oh actually - there is a third question.
Is there a way of having the phone on silent but alarm clock on so that I can sleep knowing I will be woken up by the alarm but NO phone calls. It's a basic thing in Symbian/Blackberry/S40 but seems to be missing on my Diamond?
Thanks all - i have googled and searched through the forums looking for answers to these questions but had no luck.. Hopefully you can post some answers.
Have a good day and thanks in advance
Phil
Click to expand...
Click to collapse
I think you need to set the auto disconnect drop down in Advanced Config. I've set it to 10 secs and it works for me.
govnah said:
you can just put the phone on flight mode. that way no one will bother you with phone calls. (not tried it but i think it will work)
Click to expand...
Click to collapse
There is an easier way... Just turn down the call volume to zero, leave system volume up. This will keep the alarm ringing, but calls won't bother you.
SMS messages however will also still ring. So if you are afraid of being woken up by those, just turn them off in the notifications setting.
Oh yeah, and don't forget to turn up the volume of calls again after you wake up I missed some calls because of that, hehe.
Recently I've been having problems with my Kaiser connecting to my Wifi.
Here is what happens reliably (when phone on it happens more often):
1) Turn on wifi from comms manager (it searches relentlessly)
2) If I try to turn wifi off in command manager at this stage it hangs the comms manager - not even task manager will be able to close it down.
If I turn the phone off (button) then it won't turn on again till a soft reset.
3) soft boot or remove battery - Kaiser comes back with wifi connected immediately most of the time however, it can also come back still searching in which case repeat soft reset or hard reset.
4) Once connection is established - I can connect / reconnect ok till the device is turned off then it happens again. If phone is off it appears to happen more reliably but I've not tested this enough, it happens either way eventually.
So phone on is 95% reliable but can be ok for a couple of times.
5) Once the wifi is in search mode the comms manager is useless and this continues ad infinitum (any attempt to turn wifi off will hang CM) and always a soft boot will bring the device back with a connection established to my wifi point.
Here's what I've tried:
1) Soft boot / battery removal
2) Hard reset without restoring any kind of back up -ie virgin restart
3) Hard reset without allowing custom install of t-mobile software.
Details of my device:
1) T-mobile Win mobile 6 - original rom
2) Hard SPL : SPL-1.0 Oliprof (CPLD-8)
so the only thing I've done to this machine is installed Oli's Hard SPL.
It appears therefore that no software is causing the problem. I am wondering if there's a possibilty of the Hard SPL causing a problem through corruption or do I have a hardware fault with the radio?
I'd be grateful for any help on this as to what I should do next. Please don't tell me to load win6.1 as this worked fine till now so isn't the problem. The only thing I can think of is to re-do the hard spl.
EDIT: Well I've just reloaded Hard spl 1.0 and the problem is the same so I'm out of ideas.
Just a few thoughts - although I do not have problems with my Kaiser, I have met problems with other folks.
1
Is the signal quality good - we know the range is not fantastic, so it's worth checking:
Start>Settings>Connections>Wireless Lan (Icon)>Main and look at the Signal Quality.
2
Start>Settings>Connections>Wireless Lan (Icon)>Power Mode(Tab) and change to best performance.
3
Does it do this with other networks? Don't rule out the Router creating difficulties.
4
Do you let the Kaiser go to sleep mode with wifi connected. If so I'd advise you terminate the connection in comm manager and turn off using on/off button rather than allowing auto sleep mode.
5
It might be better to allocate a fixed IP address rather than allowing the router to set it. Hangs can be created in the IP allocation stage.
6
Do you have any applications set to auto collect data? These could be weather apps, mail, time sync, quick GPS etc etc etc. If so you can try disabling those settings to ensure the crash is not a conflict between setting up the connection and simultaneous data collection.
These can be pesky problems to track down. I suspect that many of the above would be ruled out by your clean boot after a hard reset. If it always works initially after a hard reboot though, it does suggest that another app/process is interferring at a later stage.
Mike
mikechannon said:
Just a few thoughts - although I do not have problems with my Kaiser, I have met problems with other folks.
Click to expand...
Click to collapse
Thanks Mike for your valued input.
Just to answer the questions:
1) Yes signal is excellent (I connect in 3 cycles of the animation plus after reboot it connects immediately)
2) I've tried these options - my current setup worked perfectly before, plus of course a hard reset and clean machine displays the same problems
3) I haven't tried on other networks but I've eliminated the router as the problem. I've tried dynamic / fixed - I normally allocate ip via the router plus lock down mac addresses. opened the system. However, this doesn't surprise me because I can cause this lock up without a connection. It's more rare but for instance, if I turn the phone on and delete my signin, normally this pops a dialogue asking which network to connect to. Sometimes that doesn't come up and it still hangs. It is more rare though.
4) No
5) yes tried all optons
6) No and especially not on a clean machine.
I've had the device for some time without any problems so something has changed quite radically which makes me think h/ware. If I were diagnosing this on a pc I'd be looking at both H/ware or a possible driver problem as it the network adapter is locking when it's accessed, however, on this device I don't see the logic of drivers unless they can somehow corrupt in rom even after a hard reset. Is that possible or heard of?
One observation is that when I get the hang and I try to look at the wifi settings I get the following message:
Code:
"To configure your wireless network, please enable your wireless network card".
This little clue seems to point at somethhing that's caused the adaptor to cease responding but somehow in the process locking the comms manager up (ie. if I goto comms manager and try to turn the wifi off, I'll get the spinner ad infinitum). Yet a reboot will kick it back into life again. And notably once it's running, and providing I don't switch the machine off, it'll work till the cows come home perfectly reliably.
I guess my question is whether there is any possible software cause that could exist AFTER a hard reset? Also the reliablity of this problem is enhanced considerably if 1) I have the phone turned on and 2) if I turn the machine off and back on and try to reconnect. Maybe that could indicate a power issue making the adaptor die I don't know what else would make the adapter lock up.
So far I've re-installed the (same) radio and Hardspl and neither of these have changed anything. I could of course go the final step and install the rom again but I haven't done yet as I wasn't sure what components other than the radio might be relevant in the rom.
Edit:
If it always works initially after a hard reboot though, it does suggest that another app/process is interferring at a later stage.
Click to expand...
Click to collapse
Just to clarify this: Wifi connects 90% after a soft boot initially. A hard reset makes no difference to the behaviour.
It may be a hardware issue, but it would be last on my list of suspects. (I KNOW it must feel as if you have tried everything already – and I think perhaps you have!!!)
Just a couple of further suggestions – since I am certainly not sure where the problem lies.
Having done a Hard Reset, I would 95% rule out a software issue on the phone (though it is possible with corruption of original data – but a remote possibility I think).
I hesitate to suggest a router factory reset, but it may be worth trying.
Two more things to try:
http://forum.xda-developers.com/showpost.php?p=2406606&postcount=19
http://forum.xda-developers.com/showpost.php?p=4233158&postcount=20
I am curious about why having the phone enabled causes more crashes. Have there been any phone network changes in your area. It crosses my mind that there have been a few reports of wifi problems when 3G is being used. Perhaps you could, as a test, try limiting the phone to GSM only and then testing wifi:
start>settings>phone>band – set gsm on both drop down lists.
Mike
Hi Mike thanks for sticking with me on this.
mikechannon said:
Having done a Hard Reset, I would 95% rule out a software issue on the phone (though it is possible with corruption of original data – but a remote possibility I think).
I hesitate to suggest a router factory reset, but it may be worth trying.
Click to expand...
Click to collapse
There are a few reasons why I didn't spend more time on the router once I'd established a few things:
1) The adpator actually hangs and it causes abnormal behaviour on the machine. ie. comms manager hangs if you attempt to try to turn off wifi and the spinner comes up. Even more abnormally this causes one of two scenarios, either a) the machine no longer turns off or if you manage to turn off it won't turn on again. So it's causing a major problem with the whole system.
In my experience a no-connect situation never results in a hang, it just times out and a list pops up of other alternative wifi networks it's found and you can always just turn wifi off or use the machine normally at this point.
2) Wifi connects to my router no problem, always has and still will first time from a boot (providing I tried to turn wifi on and it failed before the boot). After a hang and reboot it comes back always connected - doesn't even search, it's a solid non animated connection icon. In other words the card has woken up and therefore has no problems with my router once it's alive.
As an outside chance that the router is getting confused about a disconnect / reconnect I've also rebooted it in between just to make sure - but the router can't tell my machine to hang or fail to respond.
3) I have managed to get this to hang after deleting my settings, ie. stopping it from logging on to my router but rather letting it come up with a list of wifi points it's found. Most of the time the list comes up but after several tests I've confirmed that it does eventually happen. The symptoms are the same when it does. At this point no list appears and we end up with the same deal as in 1)
Having said that I can give the router a try - resetting it isn't too much of a problem as I can backup my configuration but I'm pretty certain it's not the problem bit when problems get wierd then logic sometimes goes out the window and one has to try everything.
http://forum.xda-developers.com/showpost.php?p=4233158&postcount=20
Click to expand...
Click to collapse
I'll follow the registry one just in case but both those threads seem to be from people who can't get a wifi connect at all, usually for s/ware reasons. This is different to my problem which is an abnormal adaptor / system hang caused by accessing wifi.
I am curious about why having the phone enabled causes more crashes. Have there been any phone network changes in your area. It crosses my mind that there have been a few reports of wifi problems when 3G is being used. Perhaps you could, as a test, try limiting the phone to GSM only and then testing wifi:
Click to expand...
Click to collapse
I'm curious too. I thought a problem with the radio as a whole but I've tested GPS and bluetooth without any problems, both on plus the phone. I also thought that some kind of power issue. If the voltage to the adapter for some reason dropped below a certain point it would kill it till it was kicked back into life. Just a theory. What would cause this, I've no idea, faulty component, dry joint perhaps.
I also had similar thoughts as you on possible changes to the phone service till I finally found it could hang without the phone too just less. This is like 30% to 95%, but multiple on/ off of the wireless and a couple of machine power offs will get it to happen when the phone is off. It just takes a bit more encouragement.
As for 3G I have mine disabled. I only ever turn it on if I am out and need internet via my service. I got caught out when T-mobile's 3G kicked in, in my area and my battery life went to hell about 18months ago - since then it stays disabled.
EDIT: This may or may not be relevant but I hadn't figured out which situation causes failure turn off. If comms manager is hung after a trying to turn wifi off the machine WILL turn off but not back on again. I just found that one other dialogue that hangs is going into the Wifi settings > network adapters > IEE 802.11b/g wifi adapter. This dialog hangs solid. At this point the off button does nothing. It's a reset. Just a strange reversal but it's also a confirmation that the adapter itself is the problem or has been put into a very nasty state.
hi there
My wifi either sits searching or no network found it wont pick up any network
Its a stock rom never flashed only official upgrades
i have tried 3 hard rested and each time straight fter the rest it detects the wifi and connects to the network
but after entering my details and syncing mail and other accounts wifi will no longer work
its a bit weird
any ideas
thanks in advance
Steven
one_mad_punk said:
hi there
My wifi either sits searching or no network found it wont pick up any network
Its a stock rom never flashed only official upgrades
i have tried 3 hard rested and each time straight fter the rest it detects the wifi and connects to the network
but after entering my details and syncing mail and other accounts wifi will no longer work
its a bit weird
any ideas
thanks in advance
Steven
Click to expand...
Click to collapse
Hi there, I have the exact same situation, I tried everything, master resets, downgrades of spls and custom roms, and different radios. All didnt work. I asked the same question and no one replied, may mean there is no known solution. I also scoured the web for a whole week, reading almost everything about this issue and trying whatever was suggested to no avail. Now I am selling my HD7 with "the wifi and bluetooth doesnt work".
thanks for the reply and sorry to hear your phone is in the same boat as mine.
Mine seems to be getting worse, slowly affecting other functions of the phone. ive lost count of the hard resets i've done now. somethimes settings wont open, apps dont always open. got to pull the battery to shut the phone off as the screen dulls down if i leave it but it doesnt time off. and the power button sometimes works and sometimes don't.
think unless someone turns up with a magic nswer soon, i'll need to order new phone too. shame coz i really like the hd7
I am having the same problem. Wifi worked fine since I bought the phone on 11/2010, but stopped working last night. When I went to power the phone off, I had to remove the battery because it was stuck on the "Goodbye" screen (the first time this has happened).
Same problem, what can we do?
Scalabrine said:
I am having the same problem. Wifi worked fine since I bought the phone on 11/2010, but stopped working last night. When I went to power the phone off, I had to remove the battery because it was stuck on the "Goodbye" screen (the first time this has happened).
Click to expand...
Click to collapse
Exactly the same problem. I've flashed and reflashed, tried all radios from 5.51, 5.52, 5.69 to 5.71.
After a reset the wifi works once or twice then doesn't work anymore :crying:
Must be the module within the phone. I see the middle housing has two connectors for WiFi and GPS, perhaps the WiFi connector doesn't work but it looks like this little thing is only an antenna, not a module.
The part I meen is a "sticker" that's on the same piece of plastic as the kickstand.
Should i replace the entire inner part or would the antenna be enough?
Help: WiFi/Bluetooth Problem
Hi, I suggest you change the title to 'WiFi/Bluetooth Problem' as I also have the same problem. It does not detect either of the two WiFi protocols (WPA2 & WEP) as I tried both with my router (laptops and androids get them both perfect).
Bluetooth on the other hand, does not pair with ANY device. Brings 'Tap to pair' prompt', then the Error 'Not Supported'. I'm running Dynamics v2.0 - Newer WP7.8 custom ROM, but this was the same even with factory ROM.
So are there any developments regarding the problems here? I still got it, no Wi-Fi, no BT...
I have a problem with my WiFi too. everything was ok since I had my HD7 two years ago, and I started to flash many custom roms a year ago with no problems at all. but one month ago my WiFi stopped working without any obvious reason, my phone was connected to wifi and I put it on the table then I picked it up.... no WiFi at all and no internet sharing also. I can turn on or off the green switch of the wifi but only just for fun! and the Wifi icon which usually pops down from the top of my phone will never appear.
I tried to flash new or old roms, many many hard resets with no luck. Also opened my phone to check if there is a hardwear problem but seems not.
Now I'm using cellular for the internet untill I can buy a new phone and break this one.
Ik must be built in or so. Every flash I do, two reboots later, Wi-Fi breaks.
They just want us to get new phones :/
EDIT
I've also installed two different, brand new, SD-card (1 class 2 and 1 class 10) but this gives the same problem.
On a side note, the class 10 is way, way faster
/EDIT
Same here
The WiFi just stopped working out of the blue and nothing i've done has restarted it. It must be something with WP7 because now the wifi icon no longer appears and the Internet sharing option is blank.