hello.
I've noticed that in all my pictures (and in the camera application) I have a black dot on the low right corner (photo attached).
Did any of you had similar problems? I think something is wrong with the camera.
I've also recently got a splodge from the images from my camera...though mine looks like a glass chip...
This may seem like a silly question, but have you removed the battery cover and taken a picture to see if it's a blemish on the cover? Also, if it's still there with the cover removed, try cleaning the actual lense (delicately) and see how it looks. It's worth a shot.
yes, i've tried those. I think is something with the sensor, or under the interior lens.
after further inspection, i can see a spot on the interior lens... but i can't clean it. I think it's a scratch (might have dropped it once).
can I do something to change/clean this lens?
soxvirus said:
after further inspection, i can see a spot on the interior lens... but i can't clean it. I think it's a scratch (might have dropped it once).
can I do something to change/clean this lens?
Click to expand...
Click to collapse
Must be a big scratch for the spot to appear that large in the images...
I wonder if vaseline would help. I use a bit of the stuff for some scratches on my PC's LCD monitor. Works wonders. Not sure if it'll work with lens scratches though...
ohyeahar said:
Must be a big scratch for the spot to appear that large in the images...
I wonder if vaseline would help. I use a bit of the stuff for some scratches on my PC's LCD monitor. Works wonders. Not sure if it'll work with lens scratches though...
Click to expand...
Click to collapse
Considering the actual size of the lens, and the fact that its seems to be on the lens itself, I don't think it would take much to cause a dot of that size.
Mine also appears to be internal. Looks like a rather large dust particle is resting on the lens under the glass. Though oddly, the focus on the splodge always appears the same, regardless of the depth of focus in the shot...
Been itching for an upgrade, seems my phone realises this....
Related
Hey people, look at these 2 pictures, that I just have taken:
With the backcover on:
http://www.4shared.com/file/53179104/2a29789d/Med_cover.html
And without:
http://www.4shared.com/file/53179169/2c2a3a6/Uden_cover.html
As you can see, there is a big difference. Hmm, why haven't HTC done something to this problem?
Are you sure you were at the same distance?
And what about the focus point? It seems a bit different between the 2 pics.....
flaviopac said:
Are you sure you were at the same distance?
And what about the focus point? It seems a bit different between the 2 pics.....
Click to expand...
Click to collapse
Yes I'm very sure about that. I have tried with more pictures.
did you stick a 'lense protector' on the cover's lense screen? like if you stuck on a full body protector like invisibleSHIELD there'll be a piece for the lense cover too.
Or, did you forget to peel off the original one?
happyguy82 said:
did you stick a 'lense protector' on the cover's lense screen? like if you stuck on a full body protector like invisibleSHIELD there'll be a piece for the lense cover too.
Or, did you forget to peel off the original one?
Click to expand...
Click to collapse
Haha, no i'm not that stupid Nothing "protection" is on.
the "lens" that is part of the back cover is obviously not optically neutral. Pretty lame if you ask me.
Syphon Filter said:
the "lens" that is part of the back cover is obviously not optically neutral. Pretty lame if you ask me.
Click to expand...
Click to collapse
Without the back cover, the Diamond takes decent pictures, still slow on focusing and shutter release(you should see the Samsung F480, this little fellow shoots pictures almost like a normal digital cam) but pretty good for a 3.2 MP cam.
WITH back cover however, the pictures look like crap to me. Sometimes it looks like if the pictures have been taken through light fog and I can clean the lens cover as much as I want(not easy, tiny little bastard), after some time, the lens gets dirty/whatever again. Horrible, HTC definetely needs to find a better solution.
Here some more http://www.howardforums.com/showthread.php?t=1365731&page=43&pp=15
info
remove the small mirorr in a back cover that protect the camera from dust
Aqrab said:
remove the small mirorr in a back cover that protect the camera from dust
Click to expand...
Click to collapse
It will "destroy" the backcover? hmm. And when the mirror is gone, dust can easier come into the camera lens?
mooooooa said:
It will "destroy" the backcover? hmm. And when the mirror is gone, dust can easier come into the camera lens?
Click to expand...
Click to collapse
look i didnt try it but i think if we remove it the camera quality will increase
the htc p3600 and the touch dual doesnt have mirror for camera
Aqrab said:
look i didnt try it but i think if we remove it the camera quality will increase
the htc p3600 and the touch dual doesnt have mirror for camera
Click to expand...
Click to collapse
Yes, of course the quality will increase, when a cheap plastic cover is removed But hmm, my Diamond is 2 days old, and I don't want to already destroy a part of the cover
mooooooa said:
Yes, of course the quality will increase, when a cheap plastic cover is removed But hmm, my Diamond is 2 days old, and I don't want to already destroy a part of the cover
Click to expand...
Click to collapse
the problem is man that
when we want to clean the mirror we cant clean it good from the outside
we need to clean it to get better quality
Aqrab said:
the problem is man that
when we want to clean the mirror we cant clean it good from the outside
we need to clean it to get better quality
Click to expand...
Click to collapse
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
mooooooa said:
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
Click to expand...
Click to collapse
well ideally you should or you should remember not to put you fingers on the lens (not an easy task given the camera position i know) but lets be fair here, i mean its not as if you would take your stand alone digital camera, smear you greasy hands over the lens all day (+ let dust collect on it) and then expect it to take perfect pics...
be practical, if you remove the case screen for long you are gonna end up with scratches on the actual camera lens! and that's not easily replaceable now is it (not like the back cover...) lol
mooooooa said:
But we can't clean the mirror everytime we just wanna take a picture. That's not a good way?
Click to expand...
Click to collapse
yah i know
im jast saying when we want to clean it
remember not to put your fingers on the lens
What we need is a back cover with a piece of glass in place of the piece of plastic which covers the lense.
This seems like the only solution to me.
Its because the plastic isnt very durable, it does mist up the photos. If you look on coolsmartphone.com ive also took some pictures and they looked alot better without the back plastic cover on.
I just hope someone somewhere is reading this as i would pay for a back cover with glass instead of plastic lense cover.
The pictures are alot sharper and arent misty without the cover on.
tomchap said:
What we need is a back cover with a piece of glass in place of the piece of plastic which covers the lense.
This seems like the only solution to me.
Its because the plastic isnt very durable, it does mist up the photos. If you look on coolsmartphone.com ive also took some pictures and they looked alot better without the back plastic cover on.
I just hope someone somewhere is reading this as i would pay for a back cover with glass instead of plastic lense cover.
The pictures are alot sharper and arent misty without the cover on.
Click to expand...
Click to collapse
Your right!
white balance
Granted the backcover lens protector doesn't do justice to this phone. Adjusting the white balance does for improvement (say the lighhtbulb mode) I find. Again the camera does let this phone down, compared to others of similar spec. Can a software tweak solve the lag in motion when shooting in video mode at all? Is it as a 'simple' case as that I wonder!?
I just did some test shots with my xda diamond from germany and I honestly cant see a difference. can you tell which one is taken with the cover off?
I don't often use the camera in my Tilt, that is to say I never use it on purpose. If I need a camera on the spot, I'll use it. It's better than nothing sometimes.
I hadn't used it in a while and this weekend I needed to grab a photo of something and I noticed that the window on the battery cover was very strange looking, almost a fractal pattern of scratches or etches on it. Very light, but making it very foggy. Unfortunately I didn't notice until later, and my shots were horrible. After I noticed the fogginess, I took a few test shots with and without the cover, and without the cover the shots looked as 'good' as they ever do.
So I got out my Novus plastic polish that I use to polish up light scratches out of gadgets (similar to Applesauce and other products) and polished the window for a few minutes and all of the weird foggy layer went away. It took a few times, so it wasn't simply dirty, etc. Now I have a 'ring' of this weird looking fogginess around the edges of the lens but that doesn't affect the camera. So I took a few more test shots and the different between with the battery cover and without are back to negligible.
Just thought I'd mention it for folks who are taking off the battery cover to take photos or thinking about removing the 'lens' in the battery cover. If you have something to polish plastic and your lens looks foggy, give this a try.
I might try to take a picture of it sometime, but not sure I'll be able to really capture it well.
I used brasso brass polish for the same result, works well with a bit of elbow grease. As for the "halo" left around the edges I took a wooden toothpick and covered the end with a bit of paper towel and got rid of the "halo" by polishing in circles against the edge to remove that halo. Now my cover is like new!!!
mk69 said:
I used brasso brass polish for the same result, works well with a bit of elbow grease. As for the "halo" left around the edges I took a wooden toothpick and covered the end with a bit of paper towel and got rid of the "halo" by polishing in circles against the edge to remove that halo. Now my cover is like new!!!
Click to expand...
Click to collapse
Was yours similar to how I described? Not just foggy, but kind of a weird pattern on the plastic?
khaytsus said:
Was yours similar to how I described? Not just foggy, but kind of a weird pattern on the plastic?
Click to expand...
Click to collapse
yes, it looks like a "rainbow" on the surface almost like if you were to blow a bubble and catch it and look at it you can see a rainbow of colors in the bubble.
After I polished it it was clear, the before and after effects were enough for me to see.
must have been somthing on our fingers that got on the cover or something like that.
mk69 said:
yes, it looks like a "rainbow" on the surface almost like if you were to blow a bubble and catch it and look at it you can see a rainbow of colors in the bubble.
After I polished it it was clear, the before and after effects were enough for me to see.
must have been somthing on our fingers that got on the cover or something like that.
Click to expand...
Click to collapse
I'm beginning to think you're right, it was a suspicion of mine to start with as the only thing that could have really made a lot of contact with it is my fingers. And sure enough after a week or so, the window is starting to get funny looking again. I touch it all the time by accident, it's just in a perfect spot to get fingers on it.
khaytsus said:
I'm beginning to think you're right, it was a suspicion of mine to start with as the only thing that could have really made a lot of contact with it is my fingers. And sure enough after a week or so, the window is starting to get funny looking again. I touch it all the time by accident, it's just in a perfect spot to get fingers on it.
Click to expand...
Click to collapse
Just in case people aren't aware, the lens cover is not plastic but really thin coated glass. The coating thats been applied to it clearly isn't heavy duty enough for the type of ordinary use the device gets as mine also developed this problem, even though I'm very careful with how I treat it. I too used brasso to polish the coating off and then cleaned it with my Klearscreen and microfibre cloth and all is now well. I thought the blurry photos I was getting were because I wasn't holding the device still enough but it turned out to be Chromatic Aberation (click the link for an excellent Wikipedia description).
thanks for the advice, now my pics won't look like they've been altered by some cheap gaussian blur effects,
I tried to find why my pictures are soo foggy.
With backplate...
http://i241.photobucket.com/albums/ff294/kiske13/TytnHotfix2.jpg
and without...
http://i241.photobucket.com/albums/ff294/kiske13/Hotfix3.jpg
It's obvious that the plastic window of the camera is of a poor quality!!!
kiske13 said:
I tried to find why my pictures are soo foggy.
With backplate...
http://i241.photobucket.com/albums/ff294/kiske13/TytnHotfix2.jpg
and without...
http://i241.photobucket.com/albums/ff294/kiske13/Hotfix3.jpg
It's obvious that the plastic window of the camera is of a poor quality!!!
Click to expand...
Click to collapse
dang thats a huge improvement man, it makes me want to try and take that piece out or fit a diffrent type of glass or sumthing there..
People always look at me weird because I pull off the faceplate right before a picture snap!
I thought everyone was aware of this already?
Pretty much everyone is aware, it is like taking the lens cap off before you take a picture.
Other solutions
I've seen some replacement battery cases where the lens cover is just a hole (usually for larger battery replacement covers) and heard of people carefully drilling a hole.
If I can get a replacement back cover I'd go for drilling although it would put the lens itself at risk
just try to pse some screen guard on it
or cleanwith and antistatic clot means fibre
this will solve problem
infact i m doin the same
i have pasted a skin guard on it
workking perfect
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
nyongrand said:
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
Click to expand...
Click to collapse
I am not aware of anyone running into this issue before. If you set it on a rough surface or a surface with granules of sand, then that could definitely be the culprit. As far as replacing the lens goes, there is currently no way to get a hold of a replacement lens as far as I know.
If you mean the inside phone part then you'll have to replace the entire camera part. If you mean just the part that you can touch with your finger then you'll need to replace the back glass.
I'm having the same issue, there are some spots on top of the lenses on my phone that won't go away and *all* my photos are have the white color over exposed plus focusing is never sharp enough like other phones, I bought the phone the way it is now and I'm going to replace the back glass to see if it helps.
Alright, I was an idiot and managed to crack my glass camera lens cover. I purchased this : http://www.amazon.com/gp/product/B00RKFAZ5I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and did the replacement, but my pictures appear sort of "hazy" or "foggy" for lack of a better term. I can still get it to focus really well, but the pictures don't pop like they used to.
The only thing I did while replacing that could have caused problems was using compressed air while the old cover was off to ensure none of the shattered glass was left in the actual camera lens mechanism. I made sure to hold the can at an angle so that none of the liquid came out, but i did notice the lens mechanism moving around (almost like a hockey puck) as the air interacted with it. I assumed this sort of free floating lens design had something to do with the optical image stabilization, so it didn't seem like a big deal. I put the new cover on with clean hands and thought everything was fine until I started taking pictures again.
Has anyone replaced the camera lens cover and experienced a similar issue? I've ordered another one to take another shot at it, and I'm actually going to take some test pictures while the cover is removed just to see if I did actually damage the lens itself...
I have the jump protection, but would rather fix it myself than pay 175 for a refurb that I'm going to replace in 4 months anyways.
Why not replace the whole back camera?
I dont know how easy is to remove the lens cover but check if pictures taken without cover are foggy or not. If foggy then camera lens is dirty, if sharp - camera lens cover is a problem.
Sent from my SM-N910T using XDA Free mobile app
My guess is it got moisture behind the lense, or the lense was dirty.
When they create that hardware it is sealed in 0% humidity. If it was even a rainy day when you installed the lense, it could have caused it to fog up.
Sent from my SM-N910T using XDA Free mobile app
What I did was pull mine back and clean it with some alcohol and a q-tip
Is there a part number for that?
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
10-K said:
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
Click to expand...
Click to collapse
Thanks, might give that a shot if it doesn't clear up with the next lens cover.
Did you peel the plastics on both sides of the lens cover? Also check if it's actually focusing. Maybe slap the phone and see if it refocuses. Afterall there are moving parts in there.
Is there a genuine saphire lens cover to buy anywhere? I to used the cheap replacement cover and my pictures are blurry and bad in bright light. My camera itself should be fine though.