Alright, I was an idiot and managed to crack my glass camera lens cover. I purchased this : http://www.amazon.com/gp/product/B00RKFAZ5I/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1 and did the replacement, but my pictures appear sort of "hazy" or "foggy" for lack of a better term. I can still get it to focus really well, but the pictures don't pop like they used to.
The only thing I did while replacing that could have caused problems was using compressed air while the old cover was off to ensure none of the shattered glass was left in the actual camera lens mechanism. I made sure to hold the can at an angle so that none of the liquid came out, but i did notice the lens mechanism moving around (almost like a hockey puck) as the air interacted with it. I assumed this sort of free floating lens design had something to do with the optical image stabilization, so it didn't seem like a big deal. I put the new cover on with clean hands and thought everything was fine until I started taking pictures again.
Has anyone replaced the camera lens cover and experienced a similar issue? I've ordered another one to take another shot at it, and I'm actually going to take some test pictures while the cover is removed just to see if I did actually damage the lens itself...
I have the jump protection, but would rather fix it myself than pay 175 for a refurb that I'm going to replace in 4 months anyways.
Why not replace the whole back camera?
I dont know how easy is to remove the lens cover but check if pictures taken without cover are foggy or not. If foggy then camera lens is dirty, if sharp - camera lens cover is a problem.
Sent from my SM-N910T using XDA Free mobile app
My guess is it got moisture behind the lense, or the lense was dirty.
When they create that hardware it is sealed in 0% humidity. If it was even a rainy day when you installed the lense, it could have caused it to fog up.
Sent from my SM-N910T using XDA Free mobile app
What I did was pull mine back and clean it with some alcohol and a q-tip
Is there a part number for that?
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
10-K said:
Check out this item I found on eBay: http://pages.ebay.com/link/?nav=item.view&id=371237781680&alt=web
Click to expand...
Click to collapse
Thanks, might give that a shot if it doesn't clear up with the next lens cover.
Did you peel the plastics on both sides of the lens cover? Also check if it's actually focusing. Maybe slap the phone and see if it refocuses. Afterall there are moving parts in there.
Is there a genuine saphire lens cover to buy anywhere? I to used the cheap replacement cover and my pictures are blurry and bad in bright light. My camera itself should be fine though.
Related
I'd like to say Thank You to everyone in this forum and providing such a great site for us. I am very admire all yours talent that I wish I have, but I don't. I did I a little mod to my Tilt camera lens and it came out good and I'd like to share it with you all. This mod require no drilling to original lens and look oem.
1. A piece of Micro Slice Glass. 20 cents
(used for microscope, you can get it from science store)
http://www.flickr.com/photos/[email protected]/2914039158/
2. Knife sharpening stone, fine gain.
3. Glass cutting tool $6
http://www.flickr.com/photos/[email protected]/2914039484/
4. Qtip
5. Double side tape
Instruction:Sorry I don't know how to attach pictures into my post. Have to link it to Flickr. Hope you don't mind.
-To remove the lens, use a Qtip & push the lens out from the back side of the cover, use your figure nail to lift the lens out from the chrome frame.
http://www.flickr.com/photos/[email protected]/2913195413/in/photostream/
http://www.flickr.com/photos/[email protected]/2914041602/in/photostream/
-Use the lens to mark the size onto the Micro Slice Glass and cutting it with the glass cutting tools, you may need to try a few time to have a straight cut. http://www.flickr.com/photos/[email protected]/2914039158/
http://www.flickr.com/photos/[email protected]/2914039484/
-Now you have the piece cut out, here the fun part. use a sharpening stone and work near the sink cause you need to wet the stone during the sanding.
while sanding the new lens, use the original lens to check the shape. I made my a bit bigger then the original so it can be fit in tight without using any glue. Double side tape used just for insurance purposes.
http://www.flickr.com/photos/[email protected]/2914080332/
-Here the final product.
http://www.flickr.com/photos/[email protected]/2914250782/
-That's it folks, this is the best and the cheapest and the oem look camera lens mod ever. Here some shots I took before and after. Let me know what you think. Pictures are in order, original lens->Moded Lens->no cover.
1.http://www.flickr.com/photos/[email protected]/2914040902/
2.http://www.flickr.com/photos/[email protected]/2913194597/
3.http://www.flickr.com/photos/[email protected]/2914040044/
I will take some picture tomorrow for you to see. Time to sleep.
Those before and after pictures just show what a Mickey Mouse lens cover HTC has provided us with. How about a petition for a new back cover with a glass lens cover?
Top mod, gonna do this one.
BS...
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
The generic name would be a cotton swab.
Without cover is still better, and having done the mod many months ago, the dust problem is overblown.
Surur
Srart-up?
rfarnell said:
Thanks for the heads up. Amazing how something so simple can improve the clarity of the camera so much.
What is a qtip?
Rob
Click to expand...
Click to collapse
I don't know how many kaisers are out in the market but a manufacturer in the far-east (due to cost) can make such back cover with integrated fixed lens in the cost of ~$0.10 (go for worst case 1$) each and I'm sure most of us are willing to pay... lets say $15 each ? so here is a win-win opportunity waiting for an entrepreneur.
I did a similar yet cheaper fix.
Pop out the stock lens.
Cut some plastic (used the package some RAM for my pc came in)
Use the double sided tape and place it there. It's not that noticable but the picture quality improves a great amount.
Great mod, just took my back cover off and the picture is much better. I'm going to try just removing the cover altogether.
Lol, this is so much nicer than my ghetto fix! I had just popped out the plastic lens cover (and succeeded in breaking the little chrome-painted piece in the process, of course) and put a little piece of extra screen protector over the actual lens to protect it from the dust and what not.
Gotta' try this!
my lil camera lens cracked so i removed it and it has been off for over a month. i dont really have issues with debris getting under the battery cover. besides, its not hard to remove the back and clean it with my shirt and put it back on
nice, I will have to try this
You really can notice the difference. I just quickly take the back cover off, take a photo and then put it back on. I really notice the difference now. Thanks heaps!!!!
Thanks for the info... from now on, when I want to take a picture, I'll remove the back cover
I was thinking of doing this mod but using glass designed for optics instead of standard glass. A quick web search found http://www.astraproducts.com/i_ptsheet.asp. Are there any photography experts out there who know if this type of glass work any better than standard glass?
Also, if someone (possibly myself) were to bulk purchase pieces of optical glass "pre-machined" to fit as a replacement to the tilt, would there be much interest in purchasing these? I suppose it would all depend on cost and I have no idea what the cost would be, but maybe worth looking into.
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
mata_mosca said:
This is just my opinion, but I see no point in going through the trouble of modding a phone that was never really meant to be used primarily as a camera.
I think this makes even less sense when you take in to account the fact that it performs really bad in certain conditions.
Click to expand...
Click to collapse
My reason for the mod is because the lense on my back cover is cracked right down the middle so the camera hardly works at all. Replacement covers run $50-$60 so I'm looking for a less expensive fix. I don't really want to remove the lense entirely because of allowing dust into the case and also the actual camera lense would be exposed and liable to scratch.
hello.
I've noticed that in all my pictures (and in the camera application) I have a black dot on the low right corner (photo attached).
Did any of you had similar problems? I think something is wrong with the camera.
I've also recently got a splodge from the images from my camera...though mine looks like a glass chip...
This may seem like a silly question, but have you removed the battery cover and taken a picture to see if it's a blemish on the cover? Also, if it's still there with the cover removed, try cleaning the actual lense (delicately) and see how it looks. It's worth a shot.
yes, i've tried those. I think is something with the sensor, or under the interior lens.
after further inspection, i can see a spot on the interior lens... but i can't clean it. I think it's a scratch (might have dropped it once).
can I do something to change/clean this lens?
soxvirus said:
after further inspection, i can see a spot on the interior lens... but i can't clean it. I think it's a scratch (might have dropped it once).
can I do something to change/clean this lens?
Click to expand...
Click to collapse
Must be a big scratch for the spot to appear that large in the images...
I wonder if vaseline would help. I use a bit of the stuff for some scratches on my PC's LCD monitor. Works wonders. Not sure if it'll work with lens scratches though...
ohyeahar said:
Must be a big scratch for the spot to appear that large in the images...
I wonder if vaseline would help. I use a bit of the stuff for some scratches on my PC's LCD monitor. Works wonders. Not sure if it'll work with lens scratches though...
Click to expand...
Click to collapse
Considering the actual size of the lens, and the fact that its seems to be on the lens itself, I don't think it would take much to cause a dot of that size.
Mine also appears to be internal. Looks like a rather large dust particle is resting on the lens under the glass. Though oddly, the focus on the splodge always appears the same, regardless of the depth of focus in the shot...
Been itching for an upgrade, seems my phone realises this....
Hello, so yesterday i noticed some scratches on the camera lens and i can feel them with fingernails.So i googled about scratches on lens and almost everywhere they said it does not affect pictures that much but when i try to take pics with my SP they turn out to be fuzzy/blurry.Im afraid the warranty doesnt cover it too
Any advice what should i do?
Sorry for my english and if this thread is in the wrong section feel free to move it
after 2 months the camera lens looks terrible. im not using protective case but it is in pocket on its own no keys or lighter next to it. somehow the camera LENS got nice scratches. there is a purple color shine on the lens like on eyeglasses which supposed to be scratch resistant layer but it has gone completely. since the lens is not covered physically i have to clean the fine dust off the lens to take photo. what i see the on closer look is that the scratches are drawing circles that makes me think the lens is so soft material that the cleaning causing the scratches. i guess its plastic. i havent checked it yet but after replacing it ill do a test. i ve found on sony support forum a link where u can buy replacement lens which is by description 100% glass.
interesting that the screen itself is very durable but this tiny round lens is a crap. disappointing from sony. very stupid mistake of chosing this material for such a nice phone. i am thinkin to call them and make a complaint. :crying:
Yup, mine is scratched too, every photo looks like Joan Collins c1986.
I believe it's just stuck on so should be easy to replace.
Sent from my C5303 using Tapatalk 2
faulty assembly?
My mate said that purple layer is a kinda filter (flare,uv or whatever) supposed to face to camera. Is that possible?
r1kkHUN said:
a link where u can buy replacement lens which is by description 100% glass.
Click to expand...
Click to collapse
Can you share the link? I might be looking to replace my lens if it's not too hard
Sent from my C5303 using xda app-developers app
ZakooZ said:
Can you share the link? I might be looking to replace my lens if it's not too hard
Sent from my C5303 using xda app-developers app
Click to expand...
Click to collapse
unfortunately I cant post link yet.
Stellatech dot com
Here are the links :
http://stellatech.com/sony-c5303-xperia-sp-camera-lens,a,en,814897.html
http://rounded.com/sony-xperia-sp-c530x-camera-lens.html
or on ebay.
I have the same problem, and I just bought one.
Here's a question for people who have changed it : do you have to unscrew the back of the phone (not just the back cover) or can you change it directly ?
From what I've seen, the lens and the "camera ring" might be "glued" directly, but might as well have to come off from the inside.
Another thing, there's one screw that's not directly visible, it's under the antenna, at the bottom of the phone...
Some help would be really appreciated !
Thx
I managed to get the ring off with just my finger nails, the ring and lens are two separate pieces, when the ring is off, the glass sits in a recess, so may be a bit tricky to remove.
Sent from my C5303 using Tapatalk now Free
Is there any purple coating on the replacement lens? If no than its just a plain glass and not like the original. I will just polish off the coating. On photo there is sharp area just as the clean area of the lens.
Thanks for the tip @technaudio.
@r1kkHUN : I'll tell you when I get it, but since it's an original part, I guess it'll be there, i'd make no sense otherwise.
Good luck with the polishing, I'm affraid I doubt it'll solve the problem though.
T cut or some fine rubbing compound that you polish a car with might work?
Sent from my C5303 using Tapatalk now Free
Hi.
Just got the new lens, and changed it.
Easy and fast, and the result is perfect, and for only 11€
There isn't any purple coating on the new one I got, but it seems to be okay, I'll try to take pictures in the sun as soon as the weather gets better.
I did a little guide about it on a french forum, if you want to have a look at the pictures.
http://forum.frandroid.com/topic/168392-tuto-changer-la-lentille-de-lapn-arrière/
Bye and thanks again.
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
nyongrand said:
My Z1 camera lens cover seems to have a lot of scratches, his is very bad effect on the quality of the captured images, is anyone have this problem before, can this cover repaced.
Click to expand...
Click to collapse
I am not aware of anyone running into this issue before. If you set it on a rough surface or a surface with granules of sand, then that could definitely be the culprit. As far as replacing the lens goes, there is currently no way to get a hold of a replacement lens as far as I know.
If you mean the inside phone part then you'll have to replace the entire camera part. If you mean just the part that you can touch with your finger then you'll need to replace the back glass.
I'm having the same issue, there are some spots on top of the lenses on my phone that won't go away and *all* my photos are have the white color over exposed plus focusing is never sharp enough like other phones, I bought the phone the way it is now and I'm going to replace the back glass to see if it helps.
I recently bought a Nexus 6 on Swappa, and for the first couple of days didn't notice anything at all wrong. Now today I went to take a picture and there was a very out of focus black smudge on my pictures. Ok, no big deal. Wipe off the rear lens, still there. Uh oh. It wasn't there at first, or at least I didn't notice it. I figured I bought it second-hand so the Moto warranty is null and void anyways. So I peeled my back cover up and lifted the lens off the camera sensor. Then I gently cleaned the lens on the sensor. Powered the phone back on, the spot is still there.
So evidently some little speck of crap has managed to make its way inside of the camera sensor, or a pixel on the sensor died. Not sure what it would look like. This just looks like an out of focus black speck. So I guess I'm going to be replacing it myself. Anyone know of any parts sources other than eTradeSupply? They're currently out of stock of the rear camera sensor. I can live with $25. There is another site that wants $90, but that seems a little steep.