set CPU needed? - G1 Apps and Games

Is this app worth using if you are running cyanogen. Those that do, do you like it?

Of course, cyan uses @528Max for his rom which is too much, @384max is better and if you ever used Super-D/Dwang he uses the @384 for max.I like custom profiles too though.

Ace42 said:
Of course, cyan uses @528Max for his rom which is too much, @384max is better and if you ever used Super-D/Dwang he uses the @384 for max.I like custom profiles too though.
Click to expand...
Click to collapse
why is 528 too much?
i like setCPU because it has profiles, e.g. scaling down the CPU in sleep mode, or when low battery.

What are ideal setting by everyones opinion?

shmigao said:
why is 528 too much?
i like setCPU because it has profiles, e.g. scaling down the CPU in sleep mode, or when low battery.
Click to expand...
Click to collapse
It is too much, the phone is fast enough with 384 which can be proven when used even on King espresso or manup's eclair so no need to waste batt life.Well atleast for me since im rarely at a outlet.

Related

Overclock or not?

A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
ZeppeMan said:
A few weeks ago when I still had my HTC Hero it was overclocked to 672Mhz (standard = 528Mhz). It gave me a little boost in performance on Froyo, also the batterylife wasn't decreased too much.
But with our N1 running on 1Ghz, will it give much difference when clocked to 1113/1152Mhz? And what about batterylife?
If SetCPU is used what are your settings then? Mine is currently running on stock speed, no SetCPU.
Click to expand...
Click to collapse
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
set to 1.13 ghz
then screen off to minimum 245mhz
josemedina1983 said:
I have my nexus one rooted and flashed to MIUI Rom and clock @ 690mhz I get way better battery power. Before I would only get 6hr to 8hr if lucky now I get from 9hr to 13hr depending how much I use it.
Click to expand...
Click to collapse
So you underclocked it, what about the speed? It's not to laggy?
Nexus one can run reasonably smooth @ 600mhz and above. It might not open applications as fast as it will be @ 1GHz though.
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
shreyas1122 said:
i think 1Ghz is enough for n1
why do u want an overclock?
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
I didn't said I want an overclock. It's allready very fast on 1Ghz (compared to my old Hero ), just wanted to know your thoughts about overclocking the N1.
im overclocked at 1152 mhz and profiles set for 245 max with screen off. Overclocking is nice because i like the snappiness but most people cant tell the difference between 998 mhz and 1152. its not needed to overclock but i think profiles help alot. just my two cents
Ok thx, I will try 1150Mhz and see (if it's stable and) what batterylife does. I'm also going to try underclocking.
I have my N1 only for a couple of weeks now and I must say, this phone is awesome. It's VERY fast compared to my old Hero. I remember when I was installing apps on my Hero it became very slow and couldn't do anything untill installing was finished. With the N1 you still can do things while installing apps without lag. The responsiveness and smoothness is also a lot faster. I loved my Hero Because it never let me down, ok it was all a bit slower, but it was getting there. Now with the release of Gingerbread (custom ROM) it became to slow for me and that's why I sold my Hero and bought the N1. It was very difficult to find one, because of the EOL (end of life). But eventually I found one and i'm very happy with it. The N1 is allready more 1 year old, but it still competes with the best phones out there.
I generally run overclocked at 1075MHz, which gives a good balance between battery power usage and processor power. My understanding is that a different voltage scaling method is generally used above 1075MHz, so power consumption will increase above that point.
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
ZeppeMan said:
Didn't knew the voltage would increase above 1075Mhz, will keep that in mind
Click to expand...
Click to collapse
This is, of course, dependent upon how the kernel is constructed, but this is what I have generally found to be true.
Give us some feedback
I overclocked it too 1075Mhz when screen is on (screen off 245Mhz). Will give my thoughts in a day or 2.
Just report that my battery drain is almost the same as on stock settings. I think it drains a tiny bit faster on 1075Mhz, but nothing major. On the other hand, I don't feel it's faster on 1075Mhz then on stock speed. Only benchmarks give me performance increase.
I'm now on CM6.1.1 with stock kernel (cyanogen), I tried other kernels like Wilmonks kernel,.. Although it was more responsive, battery was going down even faster. I get best battery results with stock kernel.
Hard to choose
more speed = more battery drain
less speed = longer battery
I think I stay with the last option (less speed = longer battery), because Wildmonks kernel doesn't give me enough performance increase over the stock kernel on stock speed.
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Either way, its so easy to play with the clock settings, i'd just have a play with a bunch of different settings if i were you.
liam.lah said:
I have mine at 998mhz, but overclocked 1152 while plugged into power.
Click to expand...
Click to collapse
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
ZeppeMan said:
wanted to know your thoughts about overclocking the N1.
Click to expand...
Click to collapse
well my thoughts: underclock!
so you can watch movies on it all night!
Sent from my Nexus One
shreyas1122 said:
I'd love a how-to fire that..
mind sharing the app?
Sent from my Nexus One
Click to expand...
Click to collapse
You can use SetCPU to create profiles based on different circumstances.
Me, I have mine clocked to a max of 1075 and min of 245 with the screen on, 576 max / 128 min screen off, 998/128 charging (to reduce heat - overclocking while power is applied can make it silly hot), and a failsafe to clock down to 576/128 if the temperature gets over 50*C.
Fabulous app.
Correct me if I am wrong. When you use setcpu to "ondemand", the CPU speed can ramp up to max whenever necessary, otherwise the speed will tune down to min especially in standby mode. In that way, you can enjoy the advantages of overclocking and underclocking the CPU speed i.e. increasing performance when needed and saving power when not in use, right? When I loaded Rod's MIUI and Wildmonk's kernel, I can underclock down to 128Mhz and overclock up to 1.152Ghz. At the end of the day, I still have over 60% of power left after not so heavily use (some web browsing, checking email and listen some music). Overall, setcpu is a great app for me.

[Q] clocking cpu

i am fairly new to rooting phones. i just installed cyanogen 7 on my htc hero. works much faster than the stock. had heard that you can overclock the cpu. i downloaded CPUmaster free and lets me clock cpu to 768MHz. have been doing some research on this and have come across a few things. so really just one question; 1) what is the fastest you can clock the cpu with it still being stable?
help with this would be very much appreciated!
Depends on a variety of factors and every Hero is different. Depends on the ROM your running, kernel, etc. You can play around with capped and uncapped kernels but no one can really give you an exact # but you..u'll just have to try tinkering with the settings. If your wise you will just select one of the governors located in Cyanogenmod Settings. I prefer SmartassV2,min. 362 max 691 its efficient and takes care of everything while prolonging the life of your battery. Also remember that overclocking for an extended period of time will overheat your phone and could cause damage, so keep an eye on the core temp while playing with ur cpu settings.
1big_bear said:
i am fairly new to rooting phones. i just installed cyanogen 7 on my htc hero. works much faster than the stock. had heard that you can overclock the cpu. i downloaded CPUmaster free and lets me clock cpu to 768MHz. have been doing some research on this and have come across a few things. so really just one question; 1) what is the fastest you can clock the cpu with it still being stable?
help with this would be very much appreciated!
Click to expand...
Click to collapse
Some phones can't take more than 691, some can handle 768. I have found, for my phone, that 245/710 works great for me. I can see a marked improvement in snappiness at 710 over 691, but not really much at higher frequencies.
I used to use OnDemand as my scheduler, but with the newer .35 kernel I have liked the SmartassV2; I don't have any issues with music cutting out like i would with smartass or interactive. CM7, or most any of the roms built off of that, have the option in CM Settings to adjust both the frequency and governor so you don't need to install a 3rd party app to do so (it's under the "performance" heading). I also like to go into the spare parts app and set my animations to fast; that's just me though. I think the new CM7 builds have Jaybob's .35 kernel now instead of the .29. I have not seen an uncapped kernel that goes beyond 768 in a long time. There was one that jasonmaloney compiled that did 806 (I think) but that was pulled by him as it isn't good for the phone. just test it out and see what you like with what you have installed on your phone. Every phone is different even though they are the same.

[Q] ZeroHero question

Hi guys!
Thanks for all the time and work put into these ROMS.
I love the Zero Hero rom and would love to use it as my daily but for me it runs at a very slow speed. Seeing alot of lag on phone calls.
Is there anything I can do to speed up this fantastic ROM?
Close a lot of the running apps. Don't use a lot of widgets either. Sense is a huge memory hog and doesn't multitask well with the hero.
MattCrystal said:
Close a lot of the running apps. Don't use a lot of widgets either. Sense is a huge memory hog and doesn't multitask well with the hero.
Click to expand...
Click to collapse
Mine is slow from the fresh install....no addons, no apps, etc. Is the kernel overclocked? Or how can I overclock the cpu with this ROM?
asarjip said:
Mine is slow from the fresh install....no addons, no apps, etc. Is the kernel overclocked? Or how can I overclock the cpu with this ROM?
Click to expand...
Click to collapse
The kernel that in used in this rom can be overclocked, but you'll need SetCPU (available from the market) to set the frequences. I'm sure there are other methods, but this is how I control the cpu.
good cpu setting is 710\352 on demand. works well with Zero
Also try set sampling rate to 200000. Yes two hundred thousand. And the up threshold to 50%
Sent from my PG86100 using xda premium

[Q] Setcpu + stock kernel

Hi !
i have a LB and so, i have only a stock kernel. I would like to use Setcpu and profile to save my phone, can use it ? can i undervolt this ?
Thanks !
Meelouw said:
Hi !
i have a LB and so, i have only a stock kernel. I would like to use Setcpu and profile to save my phone, can use it ? can i undervolt this ?
Thanks !
Click to expand...
Click to collapse
No, you need a custom kernel for UV/OC/UC so setcpu or other similar apps are of no use to you.
gregbradley said:
No, you need a custom kernel for UV/OC/UC so setcpu or other similar apps are of no use to you.
Click to expand...
Click to collapse
Agreed, except you will be able to profile using stock governors and I/o schedulers if you are rooted, you will also be able to set a lower max or higher min process speed if you should choose. I have not used setCpu yet although I have it installed, annoyingly it keeps requesting su even tho I'm not using it :/
Sent from my LT30p using xda app-developers app
[email protected] said:
Agreed, except you will be able to profile using stock governors and I/o schedulers if you are rooted, you will also be able to set a lower max or higher min process speed if you should choose. I have not used setCpu yet although I have it installed, annoyingly it keeps requesting su even tho I'm not using it :/
Sent from my LT30p using xda app-developers app
Click to expand...
Click to collapse
True, you can set stock governers, but when it comes setting cpu speeds you will only be able to set stock speeds. Since the stock speeds are all aready availabe you will only be able to increase the lowest speed and decrease the max speed which is not what he wants to do, and IMHO no something to bother doing anyway.
Indeed, and thats what I said
However I would disagree that it's pointless - you could (for example) set profiles for when battery >40% max cpu = 1G - this would slightly increase remaining battery life - you can also set temperature based profiles and even profiles for specific apps.
But in truth, most of these are rather redundant given that the T already has battery saver/thermal throttling and decent enough processor to cope with heavy load - still, will be very useful once we get a few more custom kernels to play with (eagerly awaits the arrival of DOOOOOOM!!!)
[email protected] said:
Indeed, and thats what I said
However I would disagree that it's pointless - you could (for example) set profiles for when battery >40% max cpu = 1G - this would slightly increase remaining battery life - you can also set temperature based profiles and even profiles for specific apps.
But in truth, most of these are rather redundant given that the T already has battery saver/thermal throttling and decent enough processor to cope with heavy load - still, will be very useful once we get a few more custom kernels to play with (eagerly awaits the arrival of DOOOOOOM!!!)
Click to expand...
Click to collapse
+1
I tried SetCPU when I was rooted on 303 firmware.
It worked ok for about half a day and then locked in a CPU mode and hammered my battery until the phone went flat. The phone was pretty hot when I noticed and picked it up.
Might be a one-off but worth keeping look out for if you are using with a LB like I was.
If I helped hit thanks!
ok
thanks for all information !

Undervolt/Overclock Captivate...

What kind of success/failure are people having with overclocking and undervolting?
I'm doing this through ROM Toolbox Pro. Is there a better way? I'm a n00b with some of this stuff.
I have the phone overclocked to 1200mhz and all cpu levels are undervolted by 100mV.
Im doing so to get more performance, and better battery life. Just wondering what settings everyone else is using.
Also I'm using CM 10.1, with the BlueMint Theme.
Sent from my Samsung Captivate/JB CM 10.1 via Tapatalk.
DR650SE said:
Just wondering what settings everyone else is using.
Click to expand...
Click to collapse
Every phone has different limits. It's just like PC overclocking, no two CPU/MB/RAM combos are exactly the same. In general most of Captivates will handle 1200 step OC with default voltages. Not too many will handle 120% live OC though. It doesn't matter what tool you use to OC. All tools try to play with the same kernel settings. In my experience UV saves very little battery but increases significantly the chances to get stability issues. This is why I never play with UV. My particular phone can do 1400 step OC or 1200 live OC with 1350mV. I run it on 1200 step OC @ default. Also, keep in mind that different ROMs/kernels give different OC results.
RE: undervolt
I agree with Val D that undervolting will not show any significant benefits. Overvolting has helped me with stability while overclocking. I use the free Voltage Control app for voltages, or the free NStools app. Rom Toolbox is a great app too- I use it for many other things- stick with what works for you. Currently I am running at 1200Mhz step, at 120% Live OverClock to get CPU up to 1440Mhz, and ARM voltage of 1350mV at that 1200Mhz step. Rock solid. Battery life suffers a bit, but I run this way for gaming. Day-to-day regular usage I just set to 1400Mhz step and no Live OC, default voltages. I have run fine in the past at 1500Mhz, no Live OC. Overclocking the CPU tends to make my phone a bit snappier and more responsive. A big battery drain that affects my phone is an app such as Gmail running in the background, or leaving wifi enabled when not in use. Setting the phone to Airplane mode has been a big battery helper too (I do not make any voice calls on this phone anymore). Governor and scheduler setting can also have a big effect on battery life. I searched for this post I made a while back that linked to two great articles on studies of battery life and voltages, and ended up reading through them again:
http://forum.xda-developers.com/showpost.php?p=28141250&postcount=1194
Great information. Edit: just figured out how to link articles in my signature.
Thanks guys. I know each one over clocks differently. Just looking for some rough outlines. Thanks for the links. I'll be reading up on those. I have extensive computer over clocking experience, but on e phone its a whole new ball game. Basically trying to make this phone last longer.
I'll have to learn what live OCing is vs step OCing.
Thanks again!
Sent from my GT-P3113 using Tapatalk HD
I just do 1200mhz OC using CyanogenMod 10.1 - the option is in the performance menu. So far no problems.
PxGold said:
I just do 1200mhz OC using CyanogenMod 10.1 - the option is in the performance menu. So far no problems.
Click to expand...
Click to collapse
Awesome. Didn't even realize that as there. I've been using ROM Toolbox to OC to 1200MHz.
Sent from my Samsung Captivate/JB CM 10.1 via Tapatalk.
overclocking to 1200 mhz will made any difference ?
Klitoni said:
overclocking to 1200 mhz will made any difference ?
Click to expand...
Click to collapse
I really didn't notice much of a difference in speed or responsiveness using CM 10.1.

Categories

Resources