I have a problem with my X1. Its not responding when pluged in laptop or any other computer...but charger is working properly...what is the problem,do i have to change and settings or???
thank you in advance!
cheers
use a two-plug USB cable (the type that comes with portable hard drives).
Maybe setting is wrong
Hi,
take a look at your settings. In the connection settings it might be set to the faster active sync mode which does not work most of the time.
If it is already disable I have no clue
Viper
Related
My Trinity device is not recognized by any of my 3 pc's using any of USB ports. The problem started when I wanted to try a different ROM. I currently have 20070418_RUU_Trinity_LVSW_WWE_1.25.0.8 installed. I wanted to install img-32424-mUn_1_25_AKU3_5 but during the reboot after the ROM transfer the connection failed for the USB connection, after which I gave up and thought well let's try again and soft resetted the device. However I was never able to get a Active Sync session going again. The OS is still booting fine so I feel I am trying to fix something which is not entirely broken. I also tried the suggestion for flashing from SD card, but that did not load the TRINIMG.nbh file as I hoped (and read) it would. So I have a IR connection and possibly a bluetooth connection (I left my bluetooth module at work so I cant test this) Will this be my free ticket out of jail? Thanks for your input.
I seem to remember something about someone loosing USB connectivity after installing and messing with the GPS icon. This probably won't help but I would try in your case.
Start>Settings>Connections>GPS
Program Port>None
Hardware Port>None
Baud>9600
Check manage GPS automatically
Exit & turn phone off
Turn phone back on
Doesn't work?
You are no worse off
Works?
Reset hardware port to Com 9
Uncheck manage automatically
Leave program port to off
Set GPS software to com 9 9600
tried it, but didnt work.
Does the USB connection work in bootloader mode by any chance? (Hold the power and camera buttons down and reset with the stylus).
Try to delete the ActiveSync partnership on both the PDA and computer and then reestablish it ... it may have nothing to do with USB at all.
Problem went away after I forgot to turn off the PDA while it was connected to the wireless. It apparently didnt switch itself of because it was dead when I tried to turn it on. After charging it for a while I could turn it on, and as by a miracle the USB interface finally connected properly with my laptop. It didnt give the error "Windows has encountered an unknown device on your USB port" So thanks for all your input sofar.
I don't know how it happened but all of a sudden when I connect my Kaiser to my computer via USB cord, it doesn't connect. It charges my phone but it doesn't let me explore my phone. Activesync or Windows Mobile Decive Center do not read my phone.
I don't know if this matters, but when I go into COMM MANAGER (I don't know if I unchecked anything by accident) but the Data Connection tab is turned off and I can't turn it on.
Does anyone have any suggestions on how I can sync my phone again?
I tried a hard reset, i tried a soft reset, i tried different mini USB cords but NOTHING worked...
A couple things.
Under the settings tab there should be an option for " enhanced USB networking". try to enable/ disable this.
Also, it is possible your USB port is no longer functioning properly. A search for USB Problems yields MANY results, some of the fixed include simple things such as reflashing a new rom/radio , to the extremes of having the USB port replaced on the mainboard.
Also, have you tried to sync it to more than just 1 computer? Try on a couple. Make sure your activesync isnt the cause.
Just like pyraxiate said, try toggling the enhanced usb networking opetion. Also give your mini usb port on your phone a visual inspection, its not uncommon for it to crack (mine's cracked before).
If all looks good, restart your computer and soft reset your device. Google for activesync restart, theres 2 or 3 apps that completely kill activesync and restart it. It also wouldn't hurt to check another PC to see isolate the problem.
GOT IT, thanks for your help guys. I went to Settings>Connections>USB to PC and then unchecked 'enable advanced network functionality' and it worked!
Glad to hear this one was a simple one
Have fun here on XDA!
same problem
I have been having problems getting my usb to connect/sync also and thanks for the idea to check for a crack in the mini usb port. I am new to all this, this is my first pocket pc - or even smart phone before Is there an easy way to fix this problem or is a "send back to company" fix only?
I have a weird problem with my USB port (I assume it's PC related but...?).
I can connect and sync my kaiser with a std or the HTC USB cable but if I cradle it in the Seidio or connect the 3-1 adapter I get the response "unknown USB device". Strange enough is that NONE of the two is charging. At other PC's it sometimes works, sometimes not. I assume my USB drivers of my Dell Optiplex are toast but how to reinstall...
Well, start with checking to see if under settings------->connections-------->"usb to pc ", the usb to pc option doesnt have " enable advanced networking functionality" checked ( enabled ). That will most times cause issues with activesync connecting and especially prevent USB charging.
Next, check to see if actvesync is set to use USB as an active connection type under its settings.
Delete any previous activesync pairs you may have and try to reconnect. I somehow doubt its your drivers but the best way to check is to just go to Microsoft.com, navigate to their downloads section, and download a new copy of activesync.
One last thing to check. Some roms have a battery option (settings ----------> power-------> battery tab ) that doesnt allow charging when connected to a PC. Make sure that is NOT checked.
Thanks for your reply.
I tried all you mentioned beside uninst. AS clean the PCs reg and reinstall.
Will let everybody know.
hello all.
i have a strange problem on my diamond. in a few days i charge my phone in a new car kit.
and now i have the problem that i cant connet my phone to pc with usb cable. just with bluetooth.
but the phone charge me and the headspeak work fine
maybe the rom its not good anymore?
if i will make a hart reset the will solved my issue?
thanks for the help
derfler d
,,,,
1 more thing, when i charge the phone in the car he was getting hot. and i power off my phone and out my battery and start over my phone again.
aybe this burn something into the phone?
hi
was it a third party car kit?
sometimes when you start your car you can get a power surge though it and it burns the usb port.
This happen to me and I had to send it back to be fixed. (it cost me to fix it)
also have a look here it may help http://forum.xda-developers.com/showthread.php?t=457255&highlight=charging
i try to make a bootloader but i can't
so i i make a hard reset ?
and what will when i make it... this start my rom over again like the first time that i install it ?
ammm after i doin a hard reset its still doesn't work for me...
some 1 ? ...
have you tried a different USB cable.
I had a similar issue before and it turned out it was the USB cable itself.
yeah i try it...
Did you try it on another computer?
When you connect the phone to the USB port, do you get the popup asking how you would like to use it? *ActiveSync, USB Disk, internet sharing)
If you don't get one, check your settings: Start Menu -> Settings -> Connections -> USB to PC.
Check what the options are and if the "Ask me first about USB connection" is enabled.
Reconnect the phone and see if it works.
If it still doesn't work, you should check the Device Manager in your Windows computer (if you use one that is). See if the device is recognised. You can try to remove the device and reinstall the drivers for it.
ai try on snythere computer and nothing. the phone asking me about active,usb disk and internet sharing. and also nothing. so i thing that my usb connecting s burn imself. lucky that we have bluetooth, slowly but it fine... 10q for trying helping me
maybe this works
hi,
I had the same problem, try this:
go to preferences > connections > usb to pc > and uncheck the advanced networking checkbox.
After that it worked for me. BUT! I Was unable to connect to the internet on my phone through my usb cable!
So I just uninstalled active sync disconnected my phone, checked advanced networking back on again and reinstalled active sync, be sure to remove all previous pairings between your pc and your phone. I hope this works for you
greets Daan
ps always make a back up of your contacts and stuuf when uour doing these kind of things, active sync just sucks *****
nope, nothing...
**** man must be hardware:s i hope not.
cant think of anything else but to send it back for repair
good luck
When I plug my Kaiser into my PC, the pc doesnt pick it up, and the phone doesnt charge. I've check the cable and port with other devices, and they were fine. I haven't changed the computer at all either. The phone says it is charging when you first plug it into USB, but the orange charge light does not come on, and after a while it stops saying its charging in the power monitor.
If I plug it into the wall charger, the light comes on and it charges as normal. The headphones also still work fine.
I haven't changed my PC at all, and everyhting used to work just fine. Does this sound like a hardware problem? Is there anyhting else I can do to test it?
If anyone has any suggestion I'd be grateful,
Thanks
nealk2k3 said:
When I plug my Kaiser into my PC, the pc doesnt pick it up, and the phone doesnt charge.
Click to expand...
Click to collapse
If you've changed settings in the phone then make sure the tickbox under Settings -> System -> Power -> Advanced labelled 'When device is turned on, do not charge battery when connected to the PC' is unticked. Also under Settings -> Connections -> USB to PC, if you've ticked 'Enable Advanced Networking Functionality' then that can explain the lack of an ActiveSync Connection as some USB ports aren't up to that. What sort of USB port are you using (for example and old USB 1.1 port built into the motherboard)?
If I plug it into the wall charger, the light comes on and it charges as normal. The headphones also still work fine.
Click to expand...
Click to collapse
Suggesting the USB port itself is still OK (otherwise the charging problem would remain even though the audio pins are different to those used when synching.
Is there anyhting else I can do to test it?
Click to expand...
Click to collapse
Try it on another PC with Activesync 4.5 or WMDC 6.1 installed (according to which OS you're running on it). Otherwise if checking all the above configuration setting is to fiddly for you and you've nothing to loose off the phone, ensure your storage card is NOT encrypted and perform a hard reset. Read your manual or the xda-wiki if you need further info on how to do this.