Related
Hello all:
I've recently upgraded from the "leaked" ATT WM6 ROM to a ROM built from the Aussie 3 WM6 ROM with the "leaked" ATT WM6 Extended ROM.
With this combination 2G data works great, however, I have found that 3G data doesn't work at all for me.
It looks like it is connected, and will even try to switch to HSDPA mode when attempting to access data but I can't move any data up or down.
Was wondering if anyone had any ideas on what to check?
Thanks.
edit - 3G voice does work properly, so it isn't like I'm being denied access to the 3G network
I also switched from the Leaked ATT ROM to the Australia3 ROM, however I am not using any of the ATT Extended ROM stuff.
My 3G has worked fine
MS
???
I am having the same problem with my 3g data. my phone seems to connect but it will not open any sites. When I am on edge it works fine. Does anyone have any suggestions as to what I can do to fix this?
I have the same problem. My location is the NYC Metro area.
At0mAng said:
I have the same problem. My location is the NYC Metro area.
Click to expand...
Click to collapse
same issue.....in the metro area as well......i went back to the leaked ATT rom since then.....hangs every once in a while but its still better than having WinMo5 in my opinion....
changed to vodafone
I had the same problem on a business trip to NYC. The Aussie 3G rom lost internet. I switched to the vodafone and haven't had a problem in NYC or back in SF where I live.
Well I went back to the Voda version and everything works fine. Does any one have an idea why the Aussie rom 3G will not work in NYC?
I went to the Voda ROM too and now everything is working perfectly...
Any one else here using the HTC Diamond on Rogers network here in Canada?
I just purchased my Diamond a few days ago to replace my HTC 3600P. My 3600P connected to Rogers 3G network perfectly fine and I was able to get broadband speeds.
Now, with the Diamond I can only get GPRS (G icon on the phone) and Edge (E icon on the phone).
I am not sure if this had anything to do with it, but unlike the 3600P, when first setting up the Diamond it ask if I wanted the phone to auto detect the network and auto configure the phone. I selected yes.
In the phone settings under network tab, the network selection is set to Automatic. Under the Band tab, both select your network type and select your GSM/UMTS band is set to auto.
is my phone setup correctly, or is it that the Diamond doesn't work with Rogers 3G network only GPRS/EDGE? If this is the case now, could a ROM update fix this?
I really need broadband speeds on my work and am seriously considering returning the phone, as I specially asked the store I purchased it from here in Toronto if it would work on Rogers 3G network like my HTC 3600P and they said yes.
Current Diamond models (EU and Asia) do NOT support North American 3G bands. There was some talk from Rogers that the 900MHz band would be support but for now GPRS is as fast as you will get with your Diamond.
Just to add confirmation to what NikoL has said.
No 3G with the Diamond on Rogers.
Thanks for the feedback! Much appreciated!
My question now is will my ASIAN/UK diamond ever work on Roger's 3G network? If yes, any idea how long this will take?
I really need broadband speed on my mobile phone for work. I still have my HTC 3600P which works fine on the Rogers 3G.
I am trying to justify keeping the phone or returning it.
Worth holding on to?
SkankAgent said:
Thanks for the feedback! Much appreciated!
My question now is will my ASIAN/UK diamond ever work on Roger's 3G network? If yes, any idea how long this will take?
I really need broadband speed on my mobile phone for work. I still have my HTC 3600P which works fine on the Rogers 3G.
I am trying to justify keeping the phone or returning it.
Worth holding on to?
Click to expand...
Click to collapse
To be honest buddy, it all depends on Rogers if they support that band that your missing. If they arent going to enable it on their network then you will never get 3G on the Diamond that you have now. So its a 50-50 chance they may or may not...probably better off asking them if you ring them. Im sure they will tell you if they have any intentions of enabling that band on their network.
Now if it was me, id return it and wait for the North American version which should be released next month hopefully. But this is me personally...im in the UK and i couldnt live without 3G myself...blazing fast on my nokia n95 8gb which i sold and at the moment im having to make do with GPRS because my nokia 8600 luna only does GPRS.
SkankAgent said:
Thanks for the feedback! Much appreciated!
My question now is will my ASIAN/UK diamond ever work on Roger's 3G network? If yes, any idea how long this will take?
I really need broadband speed on my mobile phone for work. I still have my HTC 3600P which works fine on the Rogers 3G.
I am trying to justify keeping the phone or returning it.
Worth holding on to?
Click to expand...
Click to collapse
What are you doing that requires 3g?
Edge and GPRS don't imped stuff like email sync, syncml, or minor web browsing.
If you need to use remote access like RPD or UVNC then sell the phone. Roger's isn't about to turn on 900mhz as that requires changing the match on existing infrastructure. It makes far more sense for them to push toward LTE tech rather then waste it on whats going out.
citats said:
What are you doing that requires 3g?
Edge and GPRS don't imped stuff like email sync, syncml, or minor web browsing.
If you need to use remote access like RPD or UVNC then sell the phone. Roger's isn't about to turn on 900mhz as that requires changing the match on existing infrastructure. It makes far more sense for them to push toward LTE tech rather then waste it on whats going out.
Click to expand...
Click to collapse
I work in the streaming media industry, hence I definately require broadband on my mobile phone/device.
For now, I guess I will keep using my HTC P3600 which works perfectly fine on Rogers 3G and hope that the north amercian version of the Diamond will support Rogers 3G or on the tail end, that a ROM update for the Asian verision will 'turn on' the required freq to support Roger's 3G.
SkankAgent said:
I work in the streaming media industry, hence I definately require broadband on my mobile phone/device.
For now, I guess I will keep using my HTC P3600 which works perfectly fine on Rogers 3G and hope that the north amercian version of the Diamond will support Rogers 3G or on the tail end, that a ROM update for the Asian verision will 'turn on' the required freq to support Roger's 3G.
Click to expand...
Click to collapse
I would imagine the N American version of the Diamond would support 3G in Canada...as for a rom update to enable the asian version that you have now to use 3G??..i doubt it very much as its a hardware issue. The diamond you have is missing that 3G attenna.
Spawn12 said:
I would imagine the N American version of the Diamond would support 3G in Canada...as for a rom update to enable the asian version that you have now to use 3G??..i doubt it very much as its a hardware issue. The diamond you have is missing that 3G attenna.
Click to expand...
Click to collapse
You are correct about the ROM update. I called HTC Canada and confirmed this with their support department. I guess, I'll be putting my Diamond up for sale on ebay (as my local dealer refuses to take back the phone - last time I'll ever purchase from them, as I specifically asked about it working on Rogerrs prior to purchase) and wait for the North Amercian verision.. or see how the new 3G iphone stands up when it is released here on July 11th.
Hi,
I just got a UK Touch Diamond, and using in US with AT&T. Apparently 3G is not working, and I'm pretty much stuck with GPRS or EDGE. I was wondering if it would be possible to add 3G (US) support by installing a US radio ROM. Or will I need to replace the phone with a US version?
Thanks
Right for the last time!!!!, the uk/asian spec of the Diamond will not support 3G in the USA because it IS MISSING the attenna for that band and no updated rom etc will ever fix that problem. Its a hardware problem rather than a software problem
If you want 3G in the US then wait for the American version of the Diamond....should be out by July sometime and will support 3G in US.
Hey gusy I just got my Aussie HD with 3G on 850mhz but I think I crapped it up. I did a hard spl then went to a custom rom and now I have no 3g when I did before. Can anyone please point me in the right direction.
Thanks,
turcomora said:
Hey gusy I just got my Aussie HD with 3G on 850mhz but I think I crapped it up. I did a hard spl then went to a custom rom and now I have no 3g when I did before. Can anyone please point me in the right direction.
Thanks,
Click to expand...
Click to collapse
it would help if you tell us what custom ROM you used AND if that ROM included a Radio. if it didn't include a radio, you should be ok... also, can you get an internet connection? did try going into Phone->Menu->Options->Band Tab->and select WCDMA for GSM and the 850/1900 UMTS band -> click OK and then see if you get a signal? these answers may help us solve your issue.
OK so I found the telstra rom and what back to it. Still could not get 3G. But with that rom I did at least have the 850mhz as an option under settings, phone, band. I was for sure that Houston had the 850mhz but I could be wrong. So now I am on Rom version: 1:19:831:0 (25581) Radio 1.10.25.25. Let me try changing those settings like you suggested. Is your reception good up there in Dallas?
my reception in dallas depends on my location... at home i usually get a solid EDGE signal. i'll get a stronger 3G signal if i go outside. conversely, here in KC, i have a solid 3G signal everywhere i go. so what ROM did you flash to your phone? and did you flash a Radio ROM as well?
turcomora said:
OK so I found the telstra rom and what back to it. Still could not get 3G. But with that rom I did at least have the 850mhz as an option under settings, phone, band. I was for sure that Houston had the 850mhz but I could be wrong.
Click to expand...
Click to collapse
Not every area in the US is covered by the 3G 850mhz bandwidth by at&t. I wish the online retailers would put. May work in North America. I'm sure if you traveled around the state a bit you would find that your phone gets 3G in some areas.
I also have the option to select 850 and 1900 GSM & 3G in the settings.
AllTheWay said:
Not every area in the US is covered by the 3G 850mhz bandwidth by at&t. I wish the online retailers would put. May work in North America. I'm sure if you traveled around the state a bit you would find that your phone gets 3G in some areas.
I also have the option to select 850 and 1900 GSM & 3G in the settings.
Click to expand...
Click to collapse
May I ask what rom & radio you are using? The original Telstra rom & radio show under settings, phone, options, bands the 850 spectrum and a bunch of different combinations. I hate the tf3d on the telstra rom because it is loaded with all of there carrier stuff but I want 3G. It seems that when I change roms even if I keep the same original radio I lose all those band spectrums under settings, phone, options, bands. What would you suggest?
cortez.i said:
my reception in dallas depends on my location... at home i usually get a solid EDGE signal. i'll get a stronger 3G signal if i go outside. conversely, here in KC, i have a solid 3G signal everywhere i go. so what ROM did you flash to your phone? and did you flash a Radio ROM as well?
Click to expand...
Click to collapse
Well right now I went bacl to the telstra rom & radio because I seem to lose bands if I change rom even keeping radio the same. May I ask what rom & radio you are running?
i'm running Dutty's 2.1 ROM with the new Manila. i had the same thing happen to me: one minute the Band Tab (under phone settings) are there and the next they're gone. there are 2 fixes i use when this happens: (a) simply soft-reset and they appear or (b) use a registry editor to goto HKLM\Software\OEM\PhoneSetting and then change the setting for ShowUMTSBandPage to 1. Sometimes i have to change the other Show****Page seetings as well. right now, my device is set to Auto for BandType and Network Type and i'm getting the H symbol everywhere i go in Kansas City. i know that once i get back to Dallas, the same settings will cause my signal to vasolate between H and E depending on where i am, e.g., at home it will likely be E. if you didn't flash a different radio, you should be ok. like AllTheWay said, you're probably not in an area with a strong 850 3G signal.
cortez.i said:
i'm running Dutty's 2.1 ROM with the new Manila. i had the same thing happen to me: one minute the Band Tab (under phone settings) are there and the next they're gone. there are 2 fixes i use when this happens: (a) simply soft-reset and they appear or (b) use a registry editor to goto HKLM\Software\OEM\PhoneSetting and then change the setting for ShowUMTSBandPage to 1. Sometimes i have to change the other Show****Page seetings as well. right now, my device is set to Auto for BandType and Network Type and i'm getting the H symbol everywhere i go in Kansas City. i know that once i get back to Dallas, the same settings will cause my signal to vasolate between H and E depending on where i am, e.g., at home it will likely be E. if you didn't flash a different radio, you should be ok. like AllTheWay said, you're probably not in an area with a strong 850 3G signal.
Click to expand...
Click to collapse
I really appreciate the help. I am going to try to dutty's rom right now. His rom does it come with a radio? I will install phm reg edit and try that fix also. Thanks alot man, I will post my results.
turcomora said:
I really appreciate the help. I am going to try to dutty's rom right now. His rom does it come with a radio? I will install phm reg edit and try that fix also. Thanks alot man, I will post my results.
Click to expand...
Click to collapse
no, Dutty's 2.1 ROM does not come with a radio. what ROM did you flash that cuased the BandPage to disappear?
I used the newest wwwe shipped rom. But the used udk's custom RUU and placed the nbh file from the old radio back into it.
Hey guys, I am considering getting the telstra version HD soon, I was just wondering what do I need to do to set up the phone for ATT, or is it good to go out of the box?
Also will all the phone features function normally with ATT? Thanks for any input.
Also wondering if i have read this thread correctly, as long as I do not change the radio and only upgrade the ROM after HardSpl, then I should keep the 850mhz 3g?
Same here I have a european version of HD. What do I need to install to get the 850 3G on ATT ? please advice
daraj said:
Same here I have a european version of HD. What do I need to install to get the 850 3G on ATT ? please advice
Click to expand...
Click to collapse
you need another phone, a.k.a., the Telstra Touch HD. you will not be able to get 850 3G with the UK version of the Touch HD.
the telstra hd (T8285) is good to go on AT&T and Tmobile in the US....
straight out of the box...
another question i have is that i have the EURO HD. (t8282)..
in the BAND TAB (under phone settings) i have the options
UMTS (850 +1900) +GSM (850+1900)
does this mean that my phone will get 3g on an 850 MHZ network?
like AT&T or telstra in australia?
cheers
cortez.i said:
you need another phone, a.k.a., the Telstra Touch HD. you will not be able to get 850 3G with the UK version of the Touch HD.
Click to expand...
Click to collapse
Can you point me to a good place or website to purchase the Aussie version because I I see online is the Euro version.
daraj said:
Can you point me to a good place or website to purchase the Aussie version because I I see online is the Euro version.
Click to expand...
Click to collapse
here you go..
http://cgi.ebay.com.au/HTC-Touch-HD-T8282-T8285-Telstra-US-8-GB-Micro-SD_W0QQitemZ280322363132QQcmdZViewItemQQptZAU_Mobile_Phones?hash=item280322363132&_trksid=p3286.c0.m14&_trkparms=66%3A2|65%3A1|39%3A1|240%3A1308
I have tried every single ROM here, but sometimes when I try to answer a call the phone gets stuck.
The phone does it mostly on 3g mode, when i switch to GSM everything seems to work normally.
AT&t 3g is 850mhz here in Miami, I get 1.53mbps download speed but cant handle simple calls.
Is there a fix for this?
Thanks
EF7 said:
I have tried every single ROM here, but sometimes when I try to answer a call the phone gets stuck.
The phone does it mostly on 3g mode, when i switch to GSM everything seems to work normally.
AT&t 3g is 850mhz here in Miami, I get 1.53mbps download speed but cant handle simple calls.
Is there a fix for this?
Thanks
Click to expand...
Click to collapse
All I can say is I have tried Dutty's 6.5, Miri's 6.5 and energy rom 6.5 and they all do it. I have tried 4 different radios and its still a problem. I hope someone on here can help because a phone that you cant answer calls with is real frustrating
Duttys 6.1 Turbo X didn't do it, but had issues with the SMS feature.
EF7 said:
I have tried every single ROM here, but sometimes when I try to answer a call the phone gets stuck.
The phone does it mostly on 3g mode, when i switch to GSM everything seems to work normally.
AT&t 3g is 850mhz here in Miami, I get 1.53mbps download speed but cant handle simple calls.
Is there a fix for this?
Thanks
Click to expand...
Click to collapse
What Radio are you using? I had a very similar problem before I flashed a new radio.
I've been running Dutty's 6.5 R8 ROM & Radio since I got my phone last week and its been flawless on 3G in my area.
turcomora said:
What Radio are you using? I had a very similar problem before I flashed a new radio.
Click to expand...
Click to collapse
Ive tried all the Radios available on xda, same problem with all of them.
rotohammer said:
I've been running Dutty's 6.5 R8 ROM & Radio since I got my phone last week and its been flawless on 3G in my area.
Click to expand...
Click to collapse
Might be an AT&T issue in my area, love the phone but dont know if I can keep it like this.
EF7 said:
Ive tried all the Radios available on xda, same problem with all of them.
Might be an AT&T issue in my area, love the phone but dont know if I can keep it like this.
Click to expand...
Click to collapse
I am using 1.14.25.24 with the dll cab and my phone qulaity is excellent. Before this radio I was getting crappy reception, losing signal in areas of good strength. I also have my phone settings to WCDMA, GSM (1900 + 850) + UMTS (1900 + 850). Good luck.
turcomora said:
I am using 1.14.25.24 with the dll cab and my phone qulaity is excellent. Before this radio I was getting crappy reception, losing signal in areas of good strength. I also have my phone settings to WCDMA, GSM (1900 + 850) + UMTS (1900 + 850). Good luck.
Click to expand...
Click to collapse
I tried the band setting you mentioned, no luck. My signal is excellent everywhere I go, the problem is just when I answer calls.
I'll keep on flashing roms until I find one that works properly
have you guys tried different SIM cards to see if that may be causing the problem? if the problem doesn't occur in GSM mode, it might be signal related (i know i'm reaching here... using the process of elimination method). your respective delimas are perplexing.... i know this doesn't help, but i've had my device since March 09, live in an area where 850 3G coverage is not that strong, flashed a buttload of ROMs (4 this week) and 2 different radios and i (knock on wood) haven't encountered similar issues. you might consider flashing the latest Telstra ROM from HTC. don't know if it was leaked earlier, but based on the website the ROM was released on 7/23/09.
Same problem with my bothers SIM (also AT&t) Im going to request a new SIm and see what happens.
Im gonna try the telstra ROM, hopefully its better looking than the one that came witht he phone. Thanks.
I don't have another sim to try but I have also tried different radios and the problem remains. I did notice for whatever reason, Miris manila 2.5 rom with the "data connection" set to off but the "3G" set to on doesn't have the issue and sill works on 3G. I always thought "data connection" and "3G" had to both be on but it works. I tried the same method in the energy 6.5 rom but it doesn't let me configure the connection that way
Flashed Duttys 6.5 R9
Data Connection is OFF
3g Connection is ON
1.14.25.24 Radio
Phone Network Settings: Type AUTO GSM/UMTS Band: 1900 + 850
I'm testing it now, it seems to be working properly
The problem is still there, don't know what to do anymore
all of the sudden mine doesnt do it anymore, I have been using Dutty's R9 rom and Miri's 6.5/2.5 rom and every call can be answered fine. I happened to catch one of the "phone review" guys on youtube say that he has been having "call on the 3G network" issues but edge was working fine. He is in San Fran ( 2.5 Hours from me) so maybe it was/is a network issue???
Flashed Duttys 6.5 R9
Hard Reset
Installed Rilphone.dll
Turned phone off
Enter bootloader
Flashed 1.14.25.24 Radio
Soft Reset
Data Connection is OFF
3g Connection is ON
Phone Network Settings: Type WCDMA - GSM/UMTS Band: 1900 + 850
it has been working flawlessly for 2 days now.
I believe that the radio was flashed incorrectly the first time, it looked like it was successfully installed.
Closing thread as solution and rom flashed