I am trying to connect to the internet to my netbook via bluetooth on my td.
I have done this many times before using different kit.
I am using Windows 7 starter on my netbook. Using DUN, I use the bluetooth modem, dialing *99# no user name or password. It will not connect.
As far as i can tell the problem is that the phone has not picked up the correct profile when pairing the devices. I use activesync and that works fine.
How can i get my netbook to talk to my td using bluetooth dun?
Related
has anyone tried internet connection sharing via HSPDA to a PC using activesync or bluetooth yet? any issues?
I use USB/ActiveSync and it works fine.
Just follow the manual. I followed it and got no problem.
One thing though, in the manual, it said "execute 3gnetopt.exe in the PC to optimize it for 3G connection".
It seems, after that it changed the routing automatically and can slow down your internet connection when not using the ICC via PDA.
Well, that's easy, just disable the "additional" network interface in the PC.
i could get the usb internet sharing to work but bluetooth internet sharing doesnt work. my pc is able to detect a local bluetooth pan network without internet access. anyone got their bluetooth/internet to work?
I have internet sharing working via bluetooth on a tablet and laptop (both running XP). First I tried DUN and it worked which suprised me. Then I set up a PAN connection and got Internet sharing running. After that DUN will no longer work, it looks like it trys but then fails. But Internet Sharing is faster and works fine over bluetooth.
It can be tedious at first, you need to create a BT PAN Connection on the PC, you need to create a BT partnership with the Kaiser in your Bluetooth manager on the PC. You need to set the Kaiser's Internet sharing to "Bluetooth PAN" and have the Network connection set to go to your ISP's GPRS internet AP.
Once I have PAN setup on the PC, it's showing "Network Cable Unplugged"
I then Start the Kaiser's Internet Sharing and press connect, it starts a GPRS connection.
I then open the Bluetooth Manager on the PC, select the Kaiser's Connection Icon, right click and select connect.
Then the two devices connect and I'm off and running.
With 3G I have been able to answer calls and talk on my Jawbone BT headset while still connected to the PC via BT as well, pretty much MAGIC
bluetooth still cant work with those instructions, i'll just stick to USB for now.
how do I ensure that HSPDA is working and its not just 3G?
My 3G icon changes to H when it connects hi-Speed. I'm wondering what Bluetooth Stack your PC has, I had issues with my tablet and Hermes until I got new BT Drivers from Fujitsu support. Your PC may need updated BT profiles? My laptop is Dell (uses a Toshiba BT Stack), the tablet is Fujitsu (also Toshiba BT Stack). Just a thought.
On the Plus side, using a USB cable will keep the phone charged, which is good because HSPDA is a power hog anyway.
i'm using a bluetooth dongle with my PC running vista
Both USB and BT ICS work great for me. I've used it on Edge, 3G, and HSDPA.
Both USB and BT ICS work great for me. I've used it on Edge
Internet sharing only working on 2G and not 3G
I am connected right now via internet sharing using my USB cable. However, this is working only if I have a 2G signal showing on my tytnII. When I am in a 3G location, the internet sharing program sits with the message "waiting for network"....this is just after the message "checking USB cable".
I have tried many things including a hard-reset, not having a full sync relationship between the PC, just connected etc. All to no avail.
I am using a new Dell laptop running Vista Ultimate.
Unlike previous PDAs I've had, I don't know a way to force the tytn II to stay on 2G, so when I am at work in a 3G environment, I cannot get internet sharing to work.
Help!
I have just got my Vario III but am having problems setting it up to be used as a wireless (bluetooth) modem for my laptop computer. I am running Vista Ultimate and have not installed any driver software for the phone.
Can anyone please assist?
Wireless modem using Vista and TyTN II
First you should create a partnership between Vista and TYTN II. Then you run the Internet Sharing using Bluetooth and choose the "Connect To" menu at start menu and select connect to a Bluetooth PAN. You should see your mobile phone in the list. Just click connect. Boom !!! You're connected !
BT PAN
I can get Bluetooth Internet sharing to work on my AT&T device it is just a bit clumsier than by USB. With USB I just launch the Internet Sharing app on the Tilt and select PC Connection via USB. I then get an immediate 3G data connection on my laptop. Cool. As others have stated to tethering or extra data plans required.
To get this to work via Bluetooth I must do the above but select BT AND then connect the Network Access Point connection in my BT connections from the PC side. Isn't there some way to get this down to a single connection initiated solely from the Tilt side?
BTW: AT&T Tilt device and ROM, Toshiba BT stack, Windows XP SP2.
Hi there,
I got a car-pc since a while and have been using my sony ericsson with it... calls get transferred via bluetooth to the computer, as like phonebook in integrated into the car-pc software... all transmitted via bluetooth...
Now with the diamond, how do i set it up as a phone? winXP doesnt recognize other services than the moden funxtion
you should enable Remote SIM access on you Diamond: Start -settings - connections bluetooth SIM acces and also activate the service for your BT connection (do this in the first tab of the BT settings dialogue after connectig)
already done :-( But the Computer doesn't list other functions than modem for the HTC
Do i need any drivers for XP? Usually not...
Using Diamond & CarPC Via Internet sharing over BT
I have a CarPC in my car, it has a 7" touch screen & it is running WinXP and have built in Bluetooth. So for surfing in the internet , MSN, Skype in my car over the carpc i am using my HTC Diamond with the Internet Sharing icon and connecting it via Bluetooth to the carPC so i get FAST Internet over Bluetooth between my carpc and my HTC Diamond.
It works very good - very stable.
Matter of fact it is "capturing" my 3G Internet and pass it over Bluetooth to the carpc.
Solution works very well.
k, but i am not interested in using it as internet connection, i want to phone via the computers hardware, so the car-pc should act as an headset... besides that, he shoult be able to access the adress book and to begin calls... that for, i neeed 2 comports emulated, but how to create them?
could it be because the device is seen as a PDA, and not as a mobile phone?
I know somewhere here on XDA there is a reg hack for earlier devices to make them appear as a mobile phone to car kits. maybe the same thing will help here. I don't know where it is, can only suggest searching, unless anyone else can point you in the right direction....
I used to have PhoneConnector on my CarPC, with PhocoAdapter on the phone. It worked, but now this software is not supported anymore and unfortunately it does not work with WM6.
Freefone is not compatible either.
My good Blackbaron, I believe we users of CarPCs and Windows Mobile are scr...d!
By the way, sharing the 3G connection workds a treat, by USB, BT, Wifi... I just wish Vodafone would allow other ports than port 80
I still didnt realize what 3G is... ^^ I never owned a ppc before...
Well, on the CarPC the internet speed is as great as a DSL line, here is France I measured it at more than 3.5 MB/s (KS20 is limited to 4 MB/s with HSDPA, who knows why). Coming from the crappy Edge Motorola phone I had before, the browsing is truly amazingly fast!
help
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Try this app called JetWare
gerardo66 said:
golympio can you tell me step by step how to connect htc diamond via bluetooth for internet?
Click to expand...
Click to collapse
1) Launch the Internet Sharing application on your phone (all WM6 phones have it)
2) Select your 3G connection, and BT or USB, tap "Connect"
3) USB: have ActiveSync installed on the PC, connect the USB cable, it's done.
4) BT: you have to set up a BT PAN hosted from your phone, add your PC to it, it's done.
5) If your provider uses a proxy, setup Firefox to use it (Tools/Options/Advanced/Network)
6) If your provider has a filter on User Agent, then you need the plug-in "User Agent Switcher", to put the same User Agent string as on your phone.
There you go!
zmob123 said:
Try this app called JetWare
Click to expand...
Click to collapse
Looks interesting, I'll give it a try when I have some time. Do they have a trial version?
Yes they have, i leeched it... But i don't find the difference between now and before installing it...
Hi
My connection to internet through my diamond (internet connection over USB or bluetooth) is very unstable. The program show that it is connected and my computer gets an ip-adress from the phone, but I don't reach the internet (my phone answers to ping(default gateway))
The connection profile I'm using works (i use it to sync with Exchange) and one out of 10 times it works with my computer too
Anyone have similar problems?
Best regards
Andreassg
i have the same problem!
hey - i have the same problem - im trying on my mac (10.5.5), the computer connects to the phone fine and gets an IP address, but no data gets through to the net - strange though it works find using dialup bluetooth, just not using the internet sharing app and bluetooth lan connection. It has to be a windows mobile issue. Strange thing is though - and this is where things go strange, it works fine with the widcomm BT stack on an XP machine.
just my thoughts
D
I'm trying to set my laptop up to use the td2 to get a connection to the internet. can this be done either via bluetooth wiFi or USB. I have tried to add a bluetooth network connection but the laptop keeps giving an error saying could not connect to the remote device.
When I plug mine into my laptop via USB, I get an option on the device to 'internet share'. Does this not happen for you? I'm not sure whether Windows Mobile Device Center is also needed, but it may be!
I did this today using a Macbook. The USB did not work on the Mac but Bluetooth did. I had to connect to the phone from the computer using ordinary bluetooth first (without network). Then I had to choose Internet Connection on the phone using Bluetooth PAN - which I assume is Bluetooth network. Also had to select Bluetooth PAN on Macbook - was a bit fiddly but it worked. Anyway it does work with USB on the PC see post 16 of the thread here.
cheers both, i will check out the other thread but when I connect the phone via USB to this (work) laptop, I get nothing. My home one uses Vista and Mobile Device Centre, but my work one uses XP.
typically, after a reboot the phone gives of the option to shart internet sharing but the laptop wants to install a rndis connection, but the only way to do this is connect to internet. ironic.
Ok, finally have a proper Interenet connection and downloaded Activesync 4.5 from MS. This looks like it will resolve the situation.