Related
Hi, I need some help.
I have a S730 without HardSPL. I understand that I can only flash it with signed original ROM from HTC. Does anyone know if there is anyone to download? I really need to get one on it because I can now get into my phone right now because of keyboard layout problem. Can't even unlock it to get activesync connection.
Stupid me, why didn't I applied the HardSPL completely.
/Chrille
You may use the Hardreset:
Phone off;
Press+hold both Softkeys (the ones on Display-bottom, left and right to the direction pad);
While holding Softkeys->Tap the Powerbutton (Only a short tap,dont hold the Powerbutton!Otherwise the Phone Boots normal...)
->a black Screen with one Question appears;Press 0 if you want to restore FactoryDefaultSettings...
This may help...
arpy said:
You may use the Hardreset:
Phone off;
Press+hold both Softkeys (the ones on Display-bottom, left and right to the direction pad);
While holding Softkeys->Tap the Powerbutton (Only a short tap,dont hold the Powerbutton!Otherwise the Phone Boots normal...)
->a black Screen with one Question appears;Press 0 if you want to restore FactoryDefaultSettings...
This may help...
Click to expand...
Click to collapse
It worked finally. I pushed the power button to long in my desperate attempt to hard reset.
You saved me, thanks a lot
/Chrille
Helpme Please My HTC Kais130 (AT&T Tilt) NO RUN , IS DEAD, only power on and ( smart mobility in display black) and no more
helpme please
Hello there, we all understand youre frustration. But for beeing able to assist you everyone need to know what exactly happend here? Where you flashing? Did it fell out of youre pocket? What where you doing last on it and so on. Take 5 minutts or more and provide as much info you can then edit youre post. That is AFTER you have searched and digged trought this board using google aswell for keywords on youre issue.
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
did u try hard reset?
No , i didnt do it, i dont kwon how to do it?
hanster said:
didnt flash, it was working well suddenly is dead, plug in cable usb,and is the same but on screen appear "smart mobility" vibe and then off
Click to expand...
Click to collapse
I know this is a abiouse question but I have to ask, mate.. You are not running flat on batteries? If you havent flashed youre device, and it wount boot and you got power on it you should check youre waranty on the device. Try to charge it for 10 minuts or so (check that you have charging light on) then try to start it again.
I understand you correctly that you havent HardSPL youre device at all or?
hanster said:
No , i didnt do it, i dont kwon how to do it?
Click to expand...
Click to collapse
u should do a hard reset.
Here is a step by step for u:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Resets
Remember after performing a hardreset, u will loose all your data on your phome(not on SDcard).
Kaiser_Resets
Back to Kaiser Wiki
--------------------------------------------------------------------------------
Soft Reset
Using a stylus, press the soft reset button at the bottom of the phone
Hard Reset **NB** This cannot be performed while the device is connected/charging!**
Press and hold both soft keys
Using a stylus, press and hold the soft reset button at the bottom of the phone
Keep all three buttons pressed until the keypad lights turn off and then flash
Release the soft reset button while still pressing the soft keys
Let go of the two soft keys once the message "This operation will delete all your personal data, to manufacturer default" appears on screen
Finally, press the green call button to perform the hard reset, or press other key to cancel
Bootloader
Press and hold the Camera button
Using a stylus, press and hold the soft reset button at the bottom of the phone
Release both buttons once the bootloader screen appears
did u do it?
this is my phone
this is my phone where is it the soft key
Press and hold both soft keys
I have currently disabled pics so I cant see the pics of your phone.DOnt u have kaiser?
The soft buttons are the ones next to gren and red phone buttons and above messaging and internet buttons.
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
hanster said:
im doiin that but dont do anything, dont show a message for reset phone what more can i do, can i repair with any software, any test mode , any flash
Click to expand...
Click to collapse
just be sure u are doing the hardreset right. Some guys had problems, cause they had big fonger and they were pushing not just the soft buttons but also a buttons that are around them.
Hold these two soft buttons, then stick the stylus to the hole and hold it there antil a white screen appears where is the message shown. Then push the green phine button.
http://www.mediafire.com/?rc3vbcqdtbh
here you go a video
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
hanster said:
http://www.mediafire.com/?lrgmtzy4mat
here you go a video of problem the my HTC
Click to expand...
Click to collapse
Ok, I have seen the videos. Did u try the reset with the kaiser closed?
I remember a thread with similar problem, will try o find it and post back.
PS: In the first video, u have three hands!!
OK, I found this one:
http://forum.xda-developers.com/showthread.php?t=374388&page=3
Similar problem, does your kaiser reboot continuosly or the screen just flashes.
Your best bet is to read the whole thread, try to learn something about mtty and contact gsleon.
ah! i was using the unlocking program from the forums to unlock my tilt. i got to the 2nd step. and then from the 2nd step when it was restarting it showed the att start up then the 3g start up then it stays on a black screeen. i took out the battery and tried again and same thing. it stays on the black screen. i even reset the phone and same thing! idk what to do!! please help!
cid or sim unlock?
If it is the sim unlocker, which I think you are using the second step is to check your radio. Therefore, this is occurring possibly because you installed hardspl. Try a hard reset then search this thread:
http://forum.xda-developers.com/showthread.php?t=334679
yes i was doing the sim unlock. idk how installed hardspl. (im farely new to the whole windows mobile deal)... i tried doing the hard reset but it does the same thing. (hard reset = green button, red button and power button all at same time?)
no that does not equal hard reset. Didn't we go over this with you already?
Hold down both soft keys and insert stylus. soft keys are the two keys that have horizontal lines or dash whatever you want to call it. So hold those two down then insert stylus. You will receiving a warning. When you receiving this warning hit the green button. Then you will receive a notification to hit the green button again (the send key).
i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?
Somekid said:
i did the hard reset, windows mobile installed, and it went back to the black screen.
so now what?
Click to expand...
Click to collapse
I had the same problem u have to flash your original rom back to normal for evrything to go back, hard reset wont work.
Just stumbled on this thread as well so I thought i'd add a little information. I had this Exact same problem. Black screen after step 2. I went ahead and tried to do the 'unlock' of the phone even though i couldn't see anything. I dont know if it worked or not, but whatever. Did a reset, still black.
So I went ahead and flashed HardSPL 3.29, still black as I expected.
I THEN installed a WM 6.1 cooked rom that requested said HardSPL to be precise it was this one http://forum.xda-developers.com/showthread.php?t=416276
Anywho after flashing that rom, everything was good again, the screen worked as it should etc.
My guess was that the Hard SPL was screwing things up because my phone was still on the original ATT WM 6 rom.
Anywho, all is well. I hope this helps someone else down the road.
MF
Hi guys,
Great forum, unfortunately i can't find a solution for my problem. Here is my problem: I installed Diamond TF3D Config on my phone and i tweaked a couple of things, everything went well untill i changed the TouchFlow menus.
It automatically restarts, but the loading process can't pass the HTC logo screen and now it says:
" The Device is unable to boot because either you turned of the device incorrectly...----- Press SEND to reset your device..."
Well, ofcourse I followed the instructions and pressed SEND, but it looks like it doesn't do anything at all. The error screen above keeps displaying, without anything telling me that something is being done about the problem. Is it doing something or is it just stuck? (The light is continously on).
Can you guys help me? By the way I tried the manual hard reset, but that didn't help.
did you hard or just soft reset?
well i did a soft reset, that didn't work out keep getting that screen.
and I tried a hard reset but that wasn't possible, because i couldn't get in the device, so it pretended it was a soft reset..
but do you know if it is doing something or not , cause i get the screen continously with the lights on
PM the developer... sushilange... and then post the solution here for us all to take benefit of.
Not sure of your full situation, but two options that may help; hard reset, or connecting phone to pc and try running an RUU install; of course all data will be lost, device could be as well.
---- Hard Reset Option ----
To perform a hard reset:
1. Press and hold both softkeys on the device (the little dots above ok, and windows key). Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device.
NOTE: I had no idea which of the many keys were considered the soft keys. They are the two buttons above the phone control buttons.
2. Release the stylus but keep the softkeys pressed when you see the following message on your device screen:
“Do you want to erase all user data and restore to manufacture default?”
3. Slide open the hardware keyboard, and press R to restore to factory default or press X to exit the hard reset process.
Note:
Your device will be set back to factory default settings. Please ensure any additional installed programs and user data have been backed up before a hard reset is performed
--- RUU install ROM --- (this is for the mogul, you'll have to find your own, just reading material)
http://www.htcamerica.net/support/mogul/software-downloads.html
k I will. And this guy has the necessary knowledge?
bjason6 , thanx for your help
but I don;t understand.
hardware keyboard, a diamond doesnt have a keyboard or do you mean something else and where are the two soft buttons i cant seem to find them
This is the proper way to hard reset the Diamond (taken from the wiki):
Switch the device off. Press and hold the "Volume Down Key" and "Action Button" (round button), at the same time, use the stylus to press the red RESET button in the stylus silo. You will be presented with a menu saying 'press R to reset, X to exit'. If you press R, your device will be set back to factory default settings.
Hard Reset will delete all data you have put on the device: Programs, Settings, Mail, SMS, MMS, etc., so be careful and make a backup before doing this.
After a hard reset, you will have a complete clean new install of Windows Mobile on your device.
I thought the phone must be on for the hard reset to work, because I doesnt work on y phone
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Yes, bottom left "phone" button is send
YiuW said:
and oh, the SEND button is just the phone button right? the one beneath the House-button?
Click to expand...
Click to collapse
Nice
Now your tekin the pee mate
YiuW said:
k I will. And this guy has the necessary knowledge?
Click to expand...
Click to collapse
Well he wrote the app, so I bloody hope so
damn what the hell is wrong with my phone man damn...
YiuW said:
damn what the hell is wrong with my phone man damn...
Click to expand...
Click to collapse
LMFAO..... RTFM.... dunno
Anyone suggestions to solve this problem??
It doesn't seem that I can acces my phone via usb
Can you enter bootloader? WIKI
yeah i can
What can i do with the boat loader then?
YiuW said:
What can i do with the boat loader then?
Click to expand...
Click to collapse
Sail away ?
i just picked up my telus htc diamond last night. was looking forward to putting the new juicy rom on it today, but i get screwed over big time. first i tried putting the hardspl from here, that didnt work. then i went to ppc forums downloaded .057 cdma version of hardspl for diamond. that worked. so i wont over to install the juicy TELUS version of the rom 2.3. was going well, but 40% through it stopped, and ever since i was not able to get the rgb screen off my touch. i tried reapplying the .057 version and now it wont start up. the screen freezes on htc diamond touch, with version info. is it a done deal for this phone? if there is any way to fix it, please help me out. the stock version rom on it was 1.6.661. or do you think they will take it back. i will say i was updating the files, and it just keeps freezing on it. do you think they will notice i was tempering with it? any help would be appriciated. i just signed on a 3 year term, and don't feel like paying 500 dollars for it, as i was running all over the city to get the 100 discount on the phone.
please help me out on this one. thank you
when i start it up, it shows these stats
uP0B P DCBBBPZM-615010
B 80 R 0. 99. 90V
ps20 D 1. 06
are these stock stats?
did u try hard reset?
If not u can find a stock rom and try to flash it in using bootloader mode?it shd work if u r able to go into bootloader...good luck bro
i can't seem to dwonload the stock rom. but i doubt it will wokr because the phone is not synced. it wont start up. it stays frozen on that blackdiamond screen with red letters. do you think they will take it back in store if i say i dunno what happened?
i am not sure what hard reset is. i tried removing the battery and i also tried pressing on the little button behind the battery slot is.
Incubated said:
i can't seem to dwonload the stock rom. but i doubt it will wokr because the phone is not synced. it wont start up. it stays frozen on that blackdiamond screen with red letters. do you think they will take it back in store if i say i dunno what happened?
Click to expand...
Click to collapse
Tatswhy i ask to u to try to go into bootloader bro,if u can, u might still be able to flash in a rom...
Don't panic. Try Hard Reset. Keep pressed Volume down button+Enter+,,little button behind the battery slot'' and than follow the instruction on the screen. Try search better for Hard Reset
Incubated said:
i am not sure what hard reset is. i tried removing the battery and i also tried pressing on the little button behind the battery slot is.
Click to expand...
Click to collapse
hold down down vol key,centre action key and then poke and let go the red reset button while still holdin on to the 2 button,you shd see a grey screen which warn u about losing all your data.
i cna't seem to put on a stock rom. i download one from ppc forums, but it shows its 1.00. my telus cmae wiht .1.6.661
i can't seem to be able to flash anything on. i do hard reset and it goes ot the rgb screen, but not much from there.
when i try to flash it, it wont even display the image version. does it mean there is no rom on it or what?
Incubated said:
i cna't seem to put on a stock rom. i download one from ppc forums, but it shows its 1.00. my telus cmae wiht .1.6.661
i can't seem to be able to flash anything on. i do hard reset and it goes ot the rgb screen, but not much from there.
Click to expand...
Click to collapse
no,it goes to a light grey screen and ask u if you wanna hard formatt the 4gb disk or juz wanna reset the set...do u see tis sreen?
how bro?
no i dont see the grey screen. i am holding down volume down, middle circle, and pressing reset button behind, where battery is, nothing
its not coming up. either i hold down power button on top and volume down, it brings the touch diamond screen. or i hold down voluem down, circle button and reset and it also brings touch diamond screen. nothing else. it doesn't take me anywhere else from the rgb screen. does it mean i am screwed?
try the hard reset method remember hold down to the vol down and center buttons when u poke the red reset and hold it there for around 3sec
Incubated said:
its not coming up. either i hold down power button on top and volume down, it brings the touch diamond screen. or i hold down voluem down, circle button and reset and it also brings touch diamond screen. nothing else. it doesn't take me anywhere else from the rgb screen. does it mean i am screwed?
Click to expand...
Click to collapse
holding down power and vol down bring u to bootloader when u press reset!
hold down middle buttons? u mean not the circle but the whole square?
holy crap it keeps vibrating, wont stop
Incubated said:
hold down middle buttons? u mean not the circle but the whole square?
Click to expand...
Click to collapse
OH MY GOD!!!where do u came from my friend???MAR???
u dunno how to hard reset but u try to flash???
Incubated said:
holy crap it keeps vibrating, wont stop
Click to expand...
Click to collapse
at least ur diamond is showing some reaction pls try to HARD RESET UR SET FIRST