Database Develop

Flash went wrong!

Mates,
i flashed my X1 with itje's WM6.5
i noticed that it doesn't support the arabic packages supplied with my device so decided to go for Toutch-IT 4.5
using SD card method, i'm trying to flash and it's stucked at arround 15%
should i turn it of or wait?
what will happen now?
what are the risks?
cheers
edit HardSPL is there.

offed it
tried again
same problem
copeid the Image again to SD
Flashed successfully
thanks people

【05/04/2009】AUS2lite2000[Australian lite]

ORIGINAL ：X1i_GENERIC_AUS_CDA1223-8642_R2AA011 - uploaded
REMOVED
-all games
-GoogleMap，GooglePanel，GoogleSearch
-HandangoInHand
-MediaXperiaPanel
-Opera
-StreamingMedia
-windows autoupdate
-OneNote
-SampleMusic
-WelcomeCenter
-WindowsLiveSearch
-NetCF
ADD
-3Dgame Xtrakt
http://www.divshare.com/download/7017221-a4c

sorry about last time.
error with my rapidshare,so i changed it to divshare,it s should be ok.

hmm. using R2AA.. dont wan to try R3AA??

im a new chef.this s my first rom,i just wan a pure lite.
and im in oz,so i did choose aus r2aa011

x1iAUS2liteROM and AUS2lite2000 's difference is
the x1iAUS2liteROM i didnt delete FMradioPanel
and i removed a link in AUS2lite2000
very very small difference，like no difference.
i posted that new because x1iAUS2liteROM's download link was blank out.
http://forum.xda-developers.com/showthread.php?t=500497

Firmware Update Service
Great ROM - thanks and loved the game - very addictive. I am into speed and hate clogging up the phone with never-to-be used applications.
A couple of things:
1. Calculator application missing? (I get an error message).
2. Firmware updates from SE. I flashed the ROM from my microdisk after converting to Hard SPL. It seems to me that this then makes the phone look to the microdisk for an Img file when you put it in boot mode.
The problem is that because it does this (ie look to the microdisk card) now it will not sync with the PC to take up the new SE firmware update.
Any clues on this issue or a pointer to a relevant post?
Thanks

ajt320 said:
Great ROM - thanks and loved the game - very addictive. I am into speed and hate clogging up the phone with never-to-be used applications.
A couple of things:
1. Calculator application missing? (I get an error message).
2. Firmware updates from SE. I flashed the ROM from my microdisk after converting to Hard SPL. It seems to me that this then makes the phone look to the microdisk for an Img file when you put it in boot mode.
The problem is that because it does this (ie look to the microdisk card) now it will not sync with the PC to take up the new SE firmware update.
Any clues on this issue or a pointer to a relevant post?
Thanks
Click to expand...
Click to collapse
A：1.may be i removed calculator,i forgot it.
2.I have never used the memory card to update my phone,so sory i dont know how to solve your problem,but i knew the first time to flash this rom,it may be slow.
and do you mean to windowsupdate?or u mean SE Update Service?i got it to,it said"ur firmware is the latest",i dont know why too...hehe,so I have been using [ROMUpdateUtility] to flash my PPC by my PC.

ajt320 said:
Great ROM - thanks and loved the game - very addictive. I am into speed and hate clogging up the phone with never-to-be used applications.
A couple of things:
1. Calculator application missing? (I get an error message).
2. Firmware updates from SE. I flashed the ROM from my microdisk after converting to Hard SPL. It seems to me that this then makes the phone look to the microdisk for an Img file when you put it in boot mode.
The problem is that because it does this (ie look to the microdisk card) now it will not sync with the PC to take up the new SE firmware update.
Any clues on this issue or a pointer to a relevant post?
Thanks
Click to expand...
Click to collapse
and u can1 use my new one may be...
http://forum.xda-developers.com/showthread.php?t=505570

I recommand to add tompz dial panel in this rom

xperia stuck in restart loop

Hi there
I've got a problem with my X1. I did a hardspl which was successful and then i updated to a custom rom using the minisd card version. After a few days my xperia was restarting repeatedly during the night. This was fixed however by taking out the battery and putting it back in.
But this problem happened again a day or two later so this time i decided to reflash the ROM and still it didn't fix it. Now all my xperia does is restart, it gets to the green windows logo screen, sometimes the top task bar may load and then it restarts.
I've tried the following solutions:
1. Reflashed rom to a stock rom
2. took out the battery, minisd card, sim card.
3. Changed battery.
I cannot change the spl back to the stockspl because if i connect it to the pc, it does not recognise it as a valid usb device.
Does anyone have any suggestions or is it a bricked device?

Can you flash with SEUS? I'm not sure if SEUS works with HardSPL though...

Firefall! said:
Can you flash with SEUS? I'm not sure if SEUS works with HardSPL though...
Click to expand...
Click to collapse
HARDSPL don't work with SE update service.
Install original R3 ROM with microsd metod.

I;ve tried the R3 and R1 original ROM and i still have the same issue.

hi Man
I have same problem sense 4 days my phone just restart
I also try all solutions but it's not work
any one can help us
thanks

So , why did U do with ur problem????
u can check this thread
http://forum.xda-developers.com/showthread.php?p=4714723#post4714723

Rom Problem With my X1

Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...

Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799

drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways

error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck

DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho

error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...

DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl

error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps

DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here

Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.

ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...

Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.

NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server

http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help

error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers

circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks

DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update

error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection

1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL

kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom

[Q] SD ROM flash not working...

I have installed android on my Kaiser (Incubus26Jc_'s Super FroYo RLS15 All Language) and I want to go back to my custom WM ROM, but I've never managed to flash a ROM from the SD card, although I've respected all steps (SD card FAT32 formated, WM ROM renamed as KAISimg.nbh and put on SD root, together with KAISDIAG.nbh, pressed power & camera button and pushed the reset button)... I can get to the 3-color bootloader but for 1 second appears a message (I think is something like "no image file" but I cannot read it because it dissapeared too quickly) and then the word "serial" at the bottom of the 3-color screen, and it remains like this until I make a new reset...
As I cannot use ActiveSync anymore (due to Android OS) and I cannot flash through USB, I have no option now to get back to WM!!!
Could somebody give me an advice how to do it?
Thanks in advance!

...nevermind... I've solve it... just look at this (for others with same problem):
http://forum.xda-developers.com/showthread.php?t=423486
I have to say, this is a great forum, I can find almost always a solution for my problems!

I got the same problem, I flashed a tpc rom (well my brother actually) a while back. And I was never able to load up the bootloader with all the key combinations I can think of
(hard reset, power+camera, batery out and turn on+camera)
I also took a look at the link above me. I couldn't find an answer .
Someone please help me out.

mmh, Is there no1 with a solition to fix this>
I really hate the fact the tpc rom prevented me going into mah bootloader.