Hi everybody!
I realize fully that the device has only simple GPRS even without EDGE. However, is there any way to speed up the BA internet connection ? Maybe it is possible to connect an external 3G modem or other external device or even make some modifications in hardware (if it won’t too much complicated)?
Thanks.
hi and welcome to the forum.
the only practical way to surf faster is to connect through wi-fi. connecting to an external umts source like another phone via bluetooth is not really an improvement, because bluetooth is also terribly slow, also, if you have another device that can connect faster, you should probably use that to go online in the first place. there are no hardware modifications you can make to get edge, umts, hsdpa or anything else.
Related
Sorry if this is a repeat question. I looked through the archive, but couldn't find this question.
I haven't bought the Tilt yet, but what I want to be able to do is take a Tilt have it be connected to the 3G network and then connect to my wireless router as well. From there I would connect my laptop to the same wireless router but somehow use the 3G internet connection on the laptop. Is this easily doable?
I want to do this since when I get home I want to just keep the phone in one location where I get good reception and then be able to use my laptop where ever I move it in my house without having to move the phone and risk losing connection.
I will be buying a tethering plan.
Thanks for the help.
haven't tried this but i think u should be able to if u have internet sharing enabled.
Does the tilt come with internet sharing?
yes
but let me get this straight, you want to connect it this way
3G->tilt->router->pc
why do that when you can do
3G->tilt->pc
search for ics control, or wmwifirouter
Yes I was thinking the first way. I am not opposed to the second way, but I was curious how much range will a tilt give me as far as broadcasting on wifi?
I often watch tv in my basement and wasn't sure if the tilt wifi would be able to travel as well as my router which has an external antenae. Range was the only reason I introduce the router. It seems wmwifirouter may support what I want to do.
Well considering the phone can follow the laptop anywhere I would say range isn't a question. It's all wireless with batterys
I’m here on the coast at Keesler Air Force base. There is no internet to speak of and I do not want to spend roughly $1,400 to obtain it through a Cell provider for my laptop. I setup the Internet Sharing on my TILT and it works somewhat. Well, I lied. It stays “connected” however the damn thing peers off and the laptop continuously loses connectivity.
I only use Skype and sometimes webmail with the Internet Sharing and it cannot handle it. Every minute, sometimes up to six minutes, Skype videocalls and standard webcalls are dropped and I test the internet connection to see that it’s timing out for another minute or so and then it magically reappears.
I closed all applications and the antivirus crap to ensure that there was no extra throughput bandwidth. Anyway, I’m about to lose my damn mind here because I cannot stay in contact with my fiancée who’s on the other side of the globe right now.
According to the phone I’m only getting the Edge network and that makes sense as there are not 3G towers nearby. The signal continually shifts from two bars to four bars. I have used the Kraiser Tweak to enable HDSPA but that service is not being picked up.
Any ideas as to how I can keep the connectivity from dropping between the cellphone and the laptop? I assume that’s the issue as the phone stays “Status: connected” within the Internet Sharing application.
If it matters, I can only use the "Media Net" option under Network Connections. Media Net utilizes the wap.cingular access point.
I have tried to use the "ATT ISP GPRS" option but it continually loops through attempts to connect to the internet. Eventually it gives up without any success. The ATT ISP GPRS uses the isp.cingular access point.
Please any assistance would be most appreciated. This United States Airman is about to lose is frigging mind over the fact that he can’t communicate with anyone any longer. Ugh!!!
Thanks to any thoughts and advice to better my situation...
Oh and for the record, if it isn't understood being a Tilt, my provider is ATT.
HSDPA will not work without 3G service. MEdia Net is the best way to tether, I use it all the time. Make sure the proxy option is unchecked, or you will get very poor speeds and high latency.
What do you mean by HSDPA? Also, I tried with MEDIANET but I continually lost connectivity. However, ATT ISP GPRS seems just as bad if not worse. Any thoughts on something I can do to boost connectivity? I don't know about the proxy but where I looked one is NOT enabled.
I enabled IP Compression and Software Compression for ATT ISP GPRS and it hasn't seem to have any affect...
Thanks a lot.
crypted said:
What do you mean by HSDPA? Also, I tried with MEDIANET but I continually lost connectivity. However, ATT ISP GPRS seems just as bad if not worse. Any thoughts on something I can do to boost connectivity? I don't know about the proxy but where I looked one is NOT enabled.
I enabled IP Compression and Software Compression for ATT ISP GPRS and it hasn't seem to have any affect...
Thanks a lot.
Click to expand...
Click to collapse
You mentioned HSDPA, so that's why I said it. As for ATT ISP GPRS, you do not want to use that unless you have a modem tethering option on your AT&T account. If you go under MEdia Net settings, and then check the Proxy tab, make sure the proxy option is unchecked.
Allrighty, I've confirmed that the Proxy is not enabled. The only thing on the Proxy option section that is enabled is the first option where it says this network connects to the internet.
Any ideas on stabilizing internet on a 2 - 3 bar Edge network? If I do more than one task (more than one website OR a website and Skype) the internet gets lost quite easily...
Thanks a lot man.
Wow when I was over that way I dont recall have any issues with ATT and internet. When I access the net while tethered I use the ATT program that connects via laptop... Its not the internet sharing program.... Its called ATT Communication Manager... It may read as being tethered so if you dont have tethering on your plan then I dont know if id use it. If you have tethering it works great for me. Heres a link for the download...
http://www.wireless.att.com/businesssupport/setupOTW.do?phone=ATTTilt
You might want to try flashing another rom and radio. I remember I had an issue similar to this with my hermes from ATT. Swapping to another radio can definitely boost your signal quality. If your signal drops too low even for a second, it can cause major latency issues on the edge network( which WILL cause skype to dop a call ) . I recommend trying a ROM that already has a radio packaged in with it to save you the trouble of having to match a radio to a rom. Also look for one that has the network configuration cab built in so it can automatically set up your Connection settings for you.
Hope this helps
Allrighty... I don't have much time to research ROMS or RADIOS unfortunately. Any suggestions on where to find them, or what I might use? I'd almost prefer just to change RADIOS so long as I can find the original RADIO to replace any changes back to what I was using...
Currently, I have:
ROM 1.62.502.0
RADIO 1.27.14.09
Any help to further this US Airman along would be appreciated.
Thanks.
Hi2all!
I have Diamond 1.93 ROM, and i am using WiFi @ home & work.
But on other places i must use EDGE or GPRS (no 3G networks).
Question is simple - each time i want to use EDGE i need to go into settings -> connections and set that programs using internet should use "this" connection.
How to "teach" my diamond to switch automaticaly i.e when wifi connected - use wifi for internet, otherwise - edge.
Thanks for replies!
If Wifi (or wired ActiveSync connection) is already connected, it will be used for Internet. If not, the device will try to etablish an Edge or GPRS or UMTS connection.
If you don't want the tool to automatically connect to EDGE etc. use nodata.cab (search here in this forum) to disable / enable the connections when needed / not needed.
What I'm still searching for, is a solution to somehow priorize the available connections. Like first try to find an open WLAN and only if there's no WLAN available then ASK to open a mobile connection. Mobile data connections are still expensive for most of us and so the automatical attachment is bad. On the other hand, keeping Wifi always open consumes to much battery.
This is a 2-part dilemma...
1.) is there a way to use my Wi-fi and data plan as a gateway for internet access with the computers in my home? I want to be able to turn on the Wi-fi, and the phone will become an access point and its internet connection comes from my data plan... I guess this can be done with a T-mobile G1.
2.) the way I do it now is that I hook it up via USB to a computer, and that works pretty well. Problem is, if I disconnect it via software function on the phone or just yank the USB plug out, I have to re-boot my phone before the internet sharing will work again. This gets annoying. Anyone else experience this and/or know if there's a fix?
Or am I just dumb and want everything on a silver platter?
are these computers connect in a network. I am sure it can easily be done by internet connection sharing just have all the computers connect to your pc for a connection.
I thought about doing that--basically an internet share to an internet share. That WOULD work, but I was hoping for something a bit simpler. i am not a hardcore computer user like I was back in the day where I had to have at least 3 computers running 24/7 in order to cope with life. LOL. I was hoping for a setup where I can just walk in the door from a crappy day at work, plug my phone into the charger where it gets its best signal, and just leave it there and the rest will take care of itself. I am close to being able to do that with my Xlink bluetooth cellular gateway. Once I am home, there's no reason why I have to carry my phone around the house, as my hard-wired phones in the house ring through my cellular and I can make calls from them
The other option is to quit being a cheap turd and get a $30/mo internet connection for my computers, which is faster than the EDGE service I get here at home. But I live alone and don't download big stuff anymore or play multiplayer games, etc
I think the concept in question is one that has been batted around here for some time: Can the Kaiser be used as an access point with an internet connection?
As far as anyone's been able to tell, no. The phone's wifi chip(or part of a chip that does wifi) would need to support AP mode (access point mode) where in it receives and routes multiple wifi connections' data between each other and the GPRS hardware. As far as anyone's been able to tell, the wifi capabilities in the phone are limited to single-connection only, so allowing multiple devices to connect (or even 1, unless the desired device can get internet via adhoc or bluetooth) is not possible.
You can use the WiFi connection sharing. What it does is take your EDGE or 3G connection and set your phone up as an "access point". I put that in parenthesis because it creates an "ad-hoc" network that only certain devices can detect and connect to. Ad-Hoc is a device to device network, where the normal is infrastructure mode. Also being the device it is, I'm not sure if it's going to be an intelligent network device, IE.. iTunes music sharing between local connected clients. But you can most certainly share your connection with your laptops or desktops if they have WiFi. I'll see if I can find the cab for you and post it here.
EDIT: Here you go... http://forum.xda-developers.com/showpost.php?p=4175565&postcount=90
Cool. I will look into that! I pretty much only have one computer running at a time these days, and the EDGE connection isn't all that fast to be sharing it among multiple computers anyway.
why...
Hi,
Not sure if i understand... why would someone use the "crappy" internet connection of a phone to get internet access to your home network...
It's 2009. Why not get a decent cable or DSL account
jeen said:
Hi,
Not sure if i understand... why would someone use the "crappy" internet connection of a phone to get internet access to your home network...
It's 2009. Why not get a decent cable or DSL account
Click to expand...
Click to collapse
$ 30.00 for your phone data connection + $ 45.00 for your home cable/DSL connection = $75.00 per month, as opposed to just $30.00 for both.
To some people $ 45 dollars a month is a lot of money to save no matter how slow the connection is.
I am no expert but I found this software here a while ago and really liked it. There is an older version that is legally free but the new one is pay, try the trial.
http://www.wmwifirouter.com/
-Max
jeen said:
Hi,
Not sure if i understand... why would someone use the "crappy" internet connection of a phone to get internet access to your home network...
It's 2009. Why not get a decent cable or DSL account
Click to expand...
Click to collapse
Or you're like me and cant get anything but satellite internet where I live, which is way more expensive. Yet I get 3G just fine =)
WMWifiRouter
I like WMWifiRouter pretty well. It drains my battery like crazy, but when I have my phone plugged in, it's okay. Without being plugged in, my battery loses about 20% over ten minutes. Also, the free version doesn't really come with any admin features. The router is public and there's no way to see who's connected. Other than that, it's great!
Hello,
I'm a normal PDA/Smartphone user. I get most of the basic uses of the phone.
I updated my rom several times, changed radio, etc.
BUT! I don't get all these connection types.
I have a Diamond. I can connect to the internet with it. I always use Wi-Fi. I don't have internet from my provider, but i CAN use it. This comes at a shocking cost though.
I wanted to disable this, so I can only connect to Wi-Fi.
Then I found out that this was rather difficult. You have so many types of connections that I got lost.
GSM, GPRS, EDGE, HSDPA, HSUPA, 2G, 3G, 3.5G.............
Can some one, please clear this up for me?
What connection am I using and how do I stop it.
http://forum.xda-developers.com/showthread.php?t=377530