Database Develop

Bootloader Problems

Please help I cant get my xperia into bootloader.
I've tried volume down and power technique, but to no avail.
Any suggestions? as I'm fed up of this damn o2 ROM.
Thankyou

did you turn-off your phone first?
again, turn-off the phone,
press and hold the down sound button,
press and hold the power button until the multi-color screen appear.

yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help

You must to press for long time,Until Tree-color screen to appear..

hirst89 said:
yes, it just doesnt go into bootloader.
I really want to flash a cooked Rom.
Please help
Click to expand...
Click to collapse
I dont know if theres other way to enter bootloader mode in x1...
try to search...
or maybe you can try hardspl again.

try two thinks please:
ONE:
turn of your pda by holding long time power on/off until a message comes and ask you "turning of?" (i write the short version).
than try bootlader-modus by 1. press volume down and hold 2. press power on/off and hold.
dont shocking by vibration - hold both buttons until bootloader comes.
TWO:
your pda is quite normal?
than you dont need make finger-gym. open X1_HardSPL.exe and wait two or three seconds. it extracts some files. one of this is "EnterBootloader.exe"
copy this with usb/activesync or flashcard to root of your pda. go with fileexplorer (pda) to root and klicki-micki and you straight fly to bootloader-mode.

okokur said:
your pda is quite normal?
than you dont need make finger-gym.
Click to expand...
Click to collapse
Love it!
But yes, make sure you done hardspl first. then power off phone then hold volume down and power do not let go of buttons until multicolour screen appears.
Tin.

TBH you don't need to hardspl to get to the tri-color bootscreen, just to flash with custom roms.
And if nothing works, remove and reinsert the battery then hold power+volume-down key until it vibrates and let them go when the screen shows up.

try taking the battery out first, then putting the battery back in. make sure that the phone is NOT connected via usb cable, or else it will automatically turn back on.
then use the power and lower volume key to enter bootloader mode.

Vol Down+Power Buttons are not working when trying to flash!!!

Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!

isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!

agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???

try to hard reset first... then try to charge the new ROM.

wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....

You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be

poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?

isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try

wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!

HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes

maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again

to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.

Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...

hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks

human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally

i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!

One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it

isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.

Help bad flash

Hi all,
so i did a bad flash and my diamond doesnt boot into windows, not a problem with the Unlocker Right? turn off and turn on holding power+down volume key+ center key and back key, it boots into bootloader but it just sits there saying LOADING... and this is because the internal memory wasnt being recognize by windows before the bad flash.
do i have any other alternative??

Hi, fear not my friend. Just boot into bootloader mode by pressing power key and volume down at the same time (If you press the center button also you will trigger a hard reset.) Then plug your phone on your PC. On the bottom of the phone screen you should see that the word serial changes for USB. Then just lauch any rom upgrade(either a stock rom or a custom one). The rom upgrade utility will the upgrade your phone like it normaly does when it's not bricked. It will just be a little longer.

you have hold the power volume down and press soft reset to enter boot loader

Hi
I have the same problem, I flashed my diamond with a bad flash, now it turns over, I try a hard reset, it works not so.
when I plug in the charger, the LED does not light.
what should I do, help me pls!
Here is the link where I downloaded the flash: ftp://ppcgeeks.com/Diamond/Users/Tobeychris/Tutorial/Diamond Unlocker.rar

[Q] An huge problem!!

Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio

Remove your Micro SD-CARD, and enter in flash mode! Volume down + power on!
Open the Update Phone Utility with the rom of your choice! Remember to rename your rom to: KOVSIMG.nbh
Sorry for English.

Faffa_mcr said:
Sorry, but I have a big big problem. I have an x1, and I flashed the previous version of Energy Rom on the sd card. BUT I wanted to re-flash these, and the phone blocked in initial screen..the update rom one..
So, every time I try to update, it starts and after a few second, and when it start to update, the screen turns off. Finally, anyone can help me? I don't know how I can fix this situation PLEASE, HELP ME!!
Thanks, Fabio
Click to expand...
Click to collapse
first time u must delete first the previous version on ur sd card... than u can update the new one... and dont forget to tasks 29 before u flash the rom...

Sorry guys, but when I enter in flash mode, and I press the power button and it should load the ROM, instead it always restart after 2-3 second. I don't know what to do..please help me!!

It sounds to me that you're not holding the buttons down correctly

paul c said:
It sounds to me that you're not holding the buttons down correctly
Click to expand...
Click to collapse
I tried again, but the result is the same.. uff..

hardspl
Faffa_mcr said:
I tried again, but the result is the same.. uff..
Click to expand...
Click to collapse
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..

ahmadin said:
1. Try to pull up the batery for 10 menute.. and replace it again.. and press volume down and the power button together and dont realese until the boot screen appear...
2. connect ur x1 with the computer and hardspl the phone with the new spl 0.78.. when its finish the phone will restart.. pull the batery again for 1 menute.. and replace again... go to bootloader screen again like i explain in point 1.. after that conect again ur x1 with computer... do task29.. when finish its will restart again...
after u do task29.. u can flash ur x1 with the computer or with storage card..
this was the link for SPL 0.78 and task29 and if u still confused... http://www.826x.blogspot.com/
i think you can't flash the energy rom and always fail.. because u not hardspl your x1..
Click to expand...
Click to collapse
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
I looked that the power button have a red light, and when this turn off, it go to bootloader mode, but after few second (it's in update mode) the phone turn off..
Someone has the same problem? I don't know what to do, I'm desperate! I can't use my phone

first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps

Faffa_mcr said:
Sorry, I tried to connect the x1 to pc..but the pc doesn't recognize the phone..
Click to expand...
Click to collapse
did you try another usb port of PC?

orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...

orkhanahmadov said:
first remove sd card.
then pull out battery, press power button without battery on phone for about 30 sec.
then place battery. try to hard reset without OS:
press and hold both softkeys of X1, and press power button to turn on phone. but don't release softkeys until appears blue text with white background. slide put keyboard press R, wait to complete then press SPACE.
phone will be hard resetted. if not helped to boot OS, or there's no OS, or you did task29 before then do another task29 after this prosedure.
hope it helps
Click to expand...
Click to collapse
orkhanahmadov said:
did you try another usb port of PC?
Click to expand...
Click to collapse
Very good explaination....

Faffa_mcr said:
mmm no...but I think that's another problem, coz when I put the phone on ac mode, it's the same situation...
Click to expand...
Click to collapse
did you try method that wrote first.
and off course try another usb port, or another usb cable.
because if the phone did'nt recognized by PC, it means there's problem with cable or usb port if other things are OK.

[Q] HTC One stuck on bootloop/no hardware keys

Hi, wondering if you guys could help me.
My HTC One is stuck on bootloop. I tried to install a GPE rom with S-ON and now it get's to the first screen of the setup and restarts itself. The problem is the volume keys are defunt therefore I can't get into recovery to flash another rom.
Is there anyway I can force the phone to boot to recovery or to hboot ? I tried to «adb reboot recovery» on boot but with no luck.
Really appriciate any help.

Put it under a light and try to longpress Power and vol-.

HI Guich, thanks for the reply.
I did try what you suggested: shined the flash from another cellphone on the One, at the top where the sensors are, and long pressed power+volume-. If I hold the buttons the phone will just restart endlessly and if I let go of the power button and hold the (defunt) volume- the phone will try to boot as standard.
What would the light do to the phone ? Is it supposed to trigger some of the sensors ?
Thanks!

deerxmoose said:
HI Guich, thanks for the reply.
I did try what you suggested: shined the flash from another cellphone on the One, at the top where the sensors are, and long pressed power+volume-. If I hold the buttons the phone will just restart endlessly and if I let go of the power button and hold the (defunt) volume- the phone will try to boot as standard.
What would the light do to the phone ? Is it supposed to trigger some of the sensors ?
Thanks!
Click to expand...
Click to collapse
His intention was to re-verify whether you were pressing the volume down key and not the volume up key. There are no hidden sensors im aware of. if nobody else can give u a solution, the only choice wud b a motherboard replacement frm HTC itself

deerxmoose said:
HI Guich, thanks for the reply.
I did try what you suggested: shined the flash from another cellphone on the One, at the top where the sensors are, and long pressed power+volume-. If I hold the buttons the phone will just restart endlessly and if I let go of the power button and hold the (defunt) volume- the phone will try to boot as standard.
What would the light do to the phone ? Is it supposed to trigger some of the sensors ?
Thanks!
Click to expand...
Click to collapse
Umh, if you longpress power and vol- it will boot?
Strange.
If you longpress under the light, theoritecally, it have to boot into the bootloader...

raghav kapur that's what I trying to avoid
Guich it boots because the volume button is broken.
I think my only chance is to, some how, force the phone to get into recovery or hboot whilst booting I just don't know how I could do that without the volume buttons.

Just another bit of information.
When I've got the phone connected to the pc, Windows tries to install an MTP device but never gets to finalize the installion because the phone reboots. If I leave the battery flat and then plug it in, with the charging animation on the phone, Windows tries to install an 'unkown device'.

deerxmoose said:
raghav kapur that's what I trying to avoid
Guich it boots because the volume button is broken.
I think my only chance is to, some how, force the phone to get into recovery or hboot whilst booting I just don't know how I could do that without the volume buttons.
Click to expand...
Click to collapse
deerxmoose said:
Just another bit of information.
When I've got the phone connected to the pc, Windows tries to install an MTP device but never gets to finalize the installion because the phone reboots. If I leave the battery flat and then plug it in, with the charging animation on the phone, Windows tries to install an 'unkown device'.
Click to expand...
Click to collapse
Ah, sorry, my mistake.
If you've a broken vol- you don't have a lot of chance...
It's an unknown device because it don't boot.