Can anyone give me some sugestions to sync my tilt 2 I have read and tryed everything I could find in these threads. I will list what I have tryed:
deleted partner ships on my pc
uninstalled and reinstaled sync software
deleted device from device manager
unchecked faster file download on phone
tryed new usb cable
several hard and soft resets
will charge but no recognition of attached device
flashed energy rom 28011 on dec 10
Thanks
sdb156 said:
Can anyone give me some sugestions to sync my tilt 2
Click to expand...
Click to collapse
Well, I guess the answer is NO.
Wait, try my sig. This has been asked and answered over and over again. You have a good start. Keep plugging away at it and you will succeed.
Have you ever synced with this computer in the past?
you should try flashing the stock rhodium rom and see if you can sync then, if so maybe someone in nrgz28's thread can help you...you shouldnt start a new thread for this.
thread closed
Related
I was trying to change my rom in Vista RC2 yesterday and could not get past the bootloader screen. it was late and I didnt get to mess around with it nemore.
has anybody had any success in this?
To the best of my knowledge, you need Active sync version 4.1 to make progress with ROM upgrade.
Are you able to sync using the new Windows Mobile Device Center? That is, can you do more than sync music like in RC1? If not you still might need to do the WHOS hack to get the device download.
baarod said:
Are you able to sync using the new Windows Mobile Device Center? That is, can you do more than sync music like in RC1? If not you still might need to do the WHOS hack to get the device download.
Click to expand...
Click to collapse
You still need the hack.
I got it to work once by putting the device into bootloader mode first. But that was with RC1-5728. Did you give that a try?
Yes I did try and got frustrated. Read the wiki and found the info I posted above. For those interested, MS just released WMDC beta 3 today (http://fileforum.betanews.com/detail/Microsoft_Windows_Mobile_Device_Center_x86/1160408330/1)
Please point to the "wiki". Is it on this forum or elsewhere. Thanks for the link to b3 of WMDC.
Sorry dude, this was some time ago. I read it up either in WIKI or on the forum. And I have always used Activesync 4.1. Tried others and WMDC without luck.
Completely bricked my phone, does not connect to pc even from bootloader, bootloader says "usb" pc says something about a usb device malfunctioning. So I cannot loadwizard love my only input seems to be via sd slot. Can it be saved? please help!!
You should start by listing your phone model, what you were doing when your phone stopped functioning, the ROM you tried to use, whether you followed any flashing or unlocking guides, etc.
sorry all, I spent all night trying to sort this . Post a thread asking for help (always a last resort!) and sorted the problem about 20 later.
benoz said:
sorry all, I spent all night trying to sort this . Post a thread asking for help (always a last resort!) and sorted the problem about 20 later.
Click to expand...
Click to collapse
Still, it would be good to post your information and what you did to fix it. It may help a newbie in the future.
fair enough, g3 wizard running 2.8.7, went to update radio and killed it, would restart and run very slow, no usb connection etc. was running a ipl/spl 2.6.2 or similar. tried to install wizard love but got an error message about a malfunctioning usb device (something like that). Deleted activesync 4.2 and tried again, no goos but when I installed activesync 4.5 I managed to install button rom
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Everything is fine for me, are you sure that you flash the rom correctly as ordered ?
Sync problem
often can`t detect pda synchronitation . it`s show sync problem . Any way to fix it ?
I told you I don't have any problem which mentioned may be you have to reflash your rom, and start from the beginning.
Or first, you can delete your pairing connection with the pc, reinstall your active sync. And try to pair again. If you said "often", I hope this is not because of your hardware problem.
make sure your device is powered on ( the back light is on)..i also get it some time (only if i shut it by pressing Power Button at top)
Himalaya's USB Port is allergic to hubs
Don't try to use an USB Hub to connect the Himalaya to your PC. Always use a direct connection. This solved the problem for me.
...
Hi,
urbstar said:
Everything works fine.
But i cant use activesync 4.5 to sync my contacts and so on
(i can install programes but it doesnt sync the conntacts.)
If i disable advanced network functionality the xda freezes
and the computer shows an unknwon usb device.
Can someone help me ?
Sorry for being a noob.
Click to expand...
Click to collapse
Got exactly the same problem, since upgraded to WM6 (Tofclock Fresh ROM) Activesync never finds the PDA. Tried really everything possible, doesn't work. But 'cause there are some beautiful tools like WM5Storage or PIMBackup I don't care about ActiveSync.
May be its - as mentioned here - the USB Connection over USB Hub. But it's an internal one in my case so I can't proof.
And I don't think that the workaround for this problem is a ROM-ReFlash 'cause everything else works fine.
So long
HonkBB
i have same sync problem
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
i have reflashed 4 times now and still no good.
any ideas???
newquaymarc said:
i have upgraded from wm2003se to WM2006 AKU7.0 RAMDisk-40MB Pagepool size-24MB for Himalaya and everything is good but no activesync.
Click to expand...
Click to collapse
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
stupiddog said:
Is your USB cable connected to a hub? This was the problem in my case (see above), but other users reported that it fails to when directly connected. Strange problem this is...
Click to expand...
Click to collapse
cheer for reply but no cradle connected direct to my laptop
gonna have to go back to 2003 se till i hear of solution
shame xda runs great with wm6
I just want to ask you about active sync which version did you use ?
selangkahlagi said:
I just want to ask you about active sync which version did you use ?
Click to expand...
Click to collapse
thanks for replying
im using active sync 4.5 with xp pro all has been ok till this upgrade
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
selangkahlagi said:
I have the same with you, and everything is going well. May be you can try to delete the pairing both form your PDA and your PC and try to make new pairing again Good luck
Click to expand...
Click to collapse
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
newquaymarc said:
cheers yes tried that.
im not happy with install anyway so will try again in a few days,
i think the unlock/unhide, doc tool did'nt work as i only got a formating msg
and still had my old splash screen and 14 odd me after the upgrade.
many thanks for your help.
will let ya know how i get on
Click to expand...
Click to collapse
If you had old splash screen, big possibility you didn't do the last step
selangkahlagi said:
If you had old splash screen, big possibility you didn't do the last step
Click to expand...
Click to collapse
i did do it but dont think it ran correct, is it ment to run on 2003 se?
newquaymarc said:
i did do it but dont think it ran correct, is it ment to run on 2003 se?
Click to expand...
Click to collapse
did you do this step
hardreset your device.
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
hi
yep done all that, NO-YES-YES i think the prep work before upgrade did'nt work..
maybe i need to goto wm5 then wm6, but wm5 was too slow for me to use.
a lot of laptops actually have one set of usb ports that are registered as a powered hub and often these don't really have enough power across all the ports... jst an idea...
active-sink!!!!!!!
hi all xperts,
lemme start with my Thanx to Tof the great and Helmi who have made this possible for the good ol' Hima..
Now i need some help -
I installed this package close to a month back with all instructions point by point.
Activesync was the problem..
Today i thot i'll increase the storage space - ran the unlock and then realised the Hima Doc tool is a exe file and i'll hv to have a valid activesync connection before i can get that worked.
Then i thot, i'll reload WM6.0
Again, started in Boot loader - Got the Serial Screen with v1.06 in bottom, connected my device to run the software -
I'm redoing the flash now - wish me luck guyz!!!!!!!!!!
Greetings everyone,
I would like to ask for some advice.
I bought a HTC TYTN II and wanted to flash it to a ROM I found on the forum.
But to do that I had to use nueSPL-2.47.exe
That turned out to be a mistake as at the moment it started formatting to FAT32 the screen freezed. And I waited for around 15min. But nothing happend.
Now needless to say the device does not function. I tried a hard reset(Camera+Power+Reset) and just (Reset). But all I get is a screen darker than the pits off hell.
I am able to get the power light burning but that is it. Already tried putting the battery out and in again. But all to no avail. Maybe one of you can help me?
Thank you in advance.
-
Previous OS: Windows 6.1 (Dutch)
Active sync: 4.5.0
PC OS: Windows XP pro (English)
Just a thought but...you might want to check the Kaiser forum instead...
Posted in Titan forum. Moved to Kaiser forum.
You flashed a Titan SPL to your Kaiser?
Oh dear, not to worry, it might be fixable...
Can you get to your Bootloader?
Ta
Dave
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
kilrah said:
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
Click to expand...
Click to collapse
The other guy never fixed his phone
Dave
uh oh... what was your radio version? does the PC still try to load a driver when you connect the phone?
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
I sure hope I do not have to send it to my supplier. Because the phone is just 2 weeks old ;-)
Jin_member_of_triforce said:
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
Click to expand...
Click to collapse
are you able to load these drivers: http://forum.xda-developers.com/attachment.php?attachmentid=71038&d=1203255530
3G, okay, all of them are 3G... do you remember exact radio version. no problem if not, though.
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
There is of course a change I might be able to get files on there by putting my SD card in a card reader.
But does it boot from there?
Pocket controller-pro did not work for me.
Jin_member_of_triforce said:
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
Click to expand...
Click to collapse
that will not help, but there is another way... PM me, as it needs interactive step by step instructions.
im having the same issue i just ran the neuspl 2.47 and my htc tilt wont work the power light comes on and thats it can somepone please help me out i am in need of help badly!
ok I have searched for an answer,but could not find any solution.
I am running the Hyperdragon III rom jan 13th.
I just noticed today i can not open any email or create a new email it just does nothing. your help please. also i had a couple backups one from the other day and the other from last week. with both i still have the problem. I would perfer not to HR and have to reinstall.
thanks
Did you happen to install the cab from this post?
I did, and it had the same effect - couldn't open or create email. There is talk of a solution at the end of that thread, but I'm impatient - I did a hard reset already.
ya i did install that one. did a hard reset and everything is good now. but sucks i had reinstall everything.
bullseye69 said:
ya i did install that one. did a hard reset and everything is good now. but sucks i had reinstall everything.
Click to expand...
Click to collapse
You need to post this on the Hyperdragon thread, as I remember, SJ has been having email trouble with his new roms. It is a Hyperdragon, not a Kaiser problem.
As I remember, a work around was proposed. Have you even read back in the thread?
denco7 said:
You need to post this on the Hyperdragon thread, as I remember, SJ has been having email trouble with his new roms. It is a Hyperdragon, not a Kaiser problem.
As I remember, a work around was proposed. Have you even read back in the thread?
Click to expand...
Click to collapse
The fix was posted in PDA thread and i put it in .cab without testing, anyway it fixes the multiple sms issue, where it only marks the latest message in the thread as read, well 12hrs later we all find out it breaks email, hard-reset neede, all part of the game we play
if this cab/dll is replaced with original one does it fix the email? I trying to avoid hard reset but need e-mail back.
saopacic said:
if this cab/dll is replaced with original one does it fix the email? I trying to avoid hard reset but need e-mail back.
Click to expand...
Click to collapse
No it won't, the way i tryed was by renaming htmlnote.dll to htmlnote.dllold in the Windows dir with total commander as when you reboot this will invoke the ROM to replace original ROM file, no sucess it must nock something else out....