Related
FINALLY got cyanogen rom working. i've almost pulled my hair out over buying this phone(att user so i had to unlock and learn root, etc.)
anyways, got .999 installed and saw the * Apps2SD is automatic! All you need is a second partition (ext).
can someone point me in the right direction on how to do the partition part? i have full version of paragon and know how to use it but just don't want to fubar anything up.
i apologize for the noob question but i just need to know what to set my 2gb(although i have a 4gb class 6 in the mail now) sd card to what size partitions so i can run the add2sd.
thanks guys and love the site.
There is a sticky post in this section. I found it in less than 2 seconds. without searching.
blackinches said:
FINALLY got cyanogen rom working. i've almost pulled my hair out over buying this phone(att user so i had to unlock and learn root, etc.)
anyways, got .999 installed and saw the * Apps2SD is automatic! All you need is a second partition (ext).
can someone point me in the right direction on how to do the partition part? i have full version of paragon and know how to use it but just don't want to fubar anything up.
i apologize for the noob question but i just need to know what to set my 2gb(although i have a 4gb class 6 in the mail now) sd card to what size partitions so i can run the add2sd.
thanks guys and love the site.
Click to expand...
Click to collapse
Example for 8GB card.
Reboot and enter recovery (home+power) then go to console. Enter the below pressing "enter" after each line.
Code:
parted /dev/block/mmcblk0
print (to verfiy we know what size card we are dealing with. Mine was 8166 read below if yours is different)
rm 1 (if you had more than 1 partition you would want to rm them as well)
mkpartfs primary fat32 0 7622
mkpartfs primary ext2 7622 8134
mkpartfs primary linux-swap 8134 8166
quit
upgrade_fs
recovery
NOTE: this will reformat your entire card, so i suggest you back up your files.
and btw tell me the size of your sd card and i will type up the code for you...
use this method to tell me your exact size
go into recovery via home+power
go to console
pres enter
type:
parted /dev/block/mmcblk0
print
i am pretty sure you can see what number represent your total card size.
Easier Way!!!
OK,so I also have Paragon Partition Manager 9.0 Special Edition.
1.Go into your Paragon Partition Manager Software
2.Click on Partition Manager at the first screen
3.Click on your SD Card drive (ie. F:/)
4.Click on create partition in the left hand side of your screen.
5.It will ask you how big you would like your partition to be,then what type of partition. Paragon only supports EXT2 and EXT3 if your looking for an EXT partition. Paragon also only supports Linux-Swap2 and not Linux-Swap3.
If you need any more help man let me know.
Follow me on Twitter: http://twitter.com/andy_lowe02
andy_lowe02 said:
OK,so I also have Paragon Partition Manager 9.0 Special Edition.
1.Go into your Paragon Partition Manager Software
2.Click on Partition Manager at the first screen
3.Click on your SD Card drive (ie. F:/)
4.Click on create partition in the left hand side of your screen.
5.It will ask you how big you would like your partition to be,then what type of partition. Paragon only supports EXT2 and EXT3 if your looking for an EXT partition. Paragon also only supports Linux-Swap2 and not Linux-Swap3.
If you need any more help man let me know.
Follow me on Twitter: http://twitter.com/andy_lowe02
Click to expand...
Click to collapse
well i wouldnt say ur way is easier... it does require using a computer, mine uses the phone.. and mine is simply typing what u see.
Also im pretty sure you need to use linux-swap and not linux-swap2
(i think 2 works but im not sure that its recommendable sicne the rom cookers themeselves use 1)
I would also use the method brian posted. its much more effective
thanks guys, i got adds2sd working and everything. on a 1gb right now until my new 4gb class 6 comes in this week.
i haven't done the swap things yet as i'm not sure of them just yet. i've learned quite a bit over the last week without trying to bug too many people on the forum. your replies are MUCH appreciated.
what is the different between ext 2/3 and linux-swap? i'm running my current 1gb 514mb fat32 and 445mb ext3.
ext3 has journaling which reduces corruption a lot. linux-swap is used as virtual memory.
thanks for the reply so in turn the swap will make the phone run faster right?
also, since no one answered my question in another thread:
although i'm running .999 when i press the camera button it open a box with a 'To:' entry and 3 button 'open', 'call', and 'send'.
i've looked in the settings to see if i can change what the camera button does(want it to open the camera like before obviously) without any luck..
any idea?
Click to expand...
Click to collapse
any ideas?
thanks again
blackinches said:
thanks for the reply so in turn the swap will make the phone run faster right?
also, since no one answered my question in another thread:
Click to expand...
Click to collapse
In theory swap should make it faster as it has more memory to play with.
For your other question, a file on the ROM containing the keymaps has been changed. The only way to change what the camera button does is pull it, edit it, and push it back.
AdrianK said:
In theory swap should make it faster as it has more memory to play with.
For your other question, a file on the ROM containing the keymaps has been changed. The only way to change what the camera button does is pull it, edit it, and push it back.
Click to expand...
Click to collapse
oh boy, i tried to avoid the adb stuff as i had a few problems with it. wonder how it got 'changed'.
i'll give it a try sometime.
i searched for this and came up with some links, but none to verify my exact question which is, do i need a certain ROM, or recovery image, i have the RA-dream-V1.5.2. to apply apps2sd, i am currently running the latest cyanogen ROM, do i need a sd card reader or can it be done just by using terminal emulator, and i just bought a 4gb class 6 from new egg, and i was wondering what do you guys recommend for my ext2 partition space to be? so if you guys have any info on this it would be great if you threw it my way thank you!
Most rom have it enabled automaticlly when it sees an extX partition. The recovery is not required, but helpful if you don't have a linux system or other software to create the partitions on your computer. No card reader is required unless you want to format it that way. The only terminal commands you would need would be in the recovery console for you. The space is up to you and your needs and does not increase or decrease performance either way.
See the link below and it will help you doing it the manual way and with Amon_RA's recovery.
http://wiki.cyanogenmod.com/index.php/Apps2SD
thank you, you were a bunch of help, i shall try this when i get home tonight
No problem, let me know how it goes.
it asked me for swap-size and also ext2-size, im not to sure what numbers i need hmm?
If you plan on using a hero rom put in something for swap, if not put zero. The put in the amount of ext you want for apps. (normally between 256-512)
To upgrade the file system from ext2 -> ext3 use the command upgrade_fs in the recovery console.
Look at the link I gave you and scroll down to the Amon_RA section if you need more help.
it said upgrade_fs not found (nvm)
i got ext2 to ext3 thank you for all your help sorry for being a pain dude...
so to make sure i did it right, how much available phone space should i have?
It varies based on the cache you have for the apps, but I have 68mb but I have been running the same rom for a while. It should be around 80mb if you haven't done anything to build the cache, but I have the 1.33.2005 SPL which increases the internal memory size.
I get the same error "upgrade_fs not found" when I want to upgrade to ext 3 from console. From Amon_Ra's recovery I get an error too when I want to upgrade to ext 3. The other SD card I have worked perfectly with exact the same steps. What is wrong? Thanks
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
sakumaxp said:
i guess thats the same?
Click to expand...
Click to collapse
As the upgrade_fs script, yes.
evilkorn said:
As the upgrade_fs script, yes.
Click to expand...
Click to collapse
yeah thats what i did because it did the not found error, so i was like meh, sounds like the same haha
sakumaxp said:
if you amon's isnt there an option that says upgrade ext2 to ext3? i guess thats the same?
Click to expand...
Click to collapse
I get an error when I press "upgrade ext2 to ext3" on my 2 GB card, the 1 GB card is done already.
sorry dude im a noob at this thing myself i guess one of the senior guys gotta answer this for you =\
Very strange, after many attempts suddenly I made the partitions, I don't know why but it worked
well thats good to hear =]
Hello all,
i have had root for a while now using cyanogens 4.2.12.2 with the ram hack, ok the thing im confused with is i have 2 partittions fat32 and ext3 for the a2sd but whenever i install a app it installs to internal memory, do i need linux swap aswell ?
Thanks Alot Ryan​
What size is your ext3? And by installs to internal memory, do you mean it goes down a bit for each install, or does it go down the total app size? Even with A2SD you still use up a little internal memory. As well, if you run out of space on the ext3, it will install to the internal memory. It should work just fine out of the box with no need to do anything crazy on your part.
well im using 2gb sd with 600mb ext3, well i installed 8apps and it went from 71.91mb to 71.02 is this normal and thanks for the quick response
That is very normal, if it wasn't working you would have seen it go from 71.91 to 50 type thing. That small amount taken up is normal.
ok then thanks alot for your help
hi i needed help with apps to sd card i recently rooted my g1 to cm 4.2.14.1. i was reading that it does it automatically thru this mod if you have a partitioned sd card which i do but i notice everytime i download a new app my internal phone storage goes down. i was wondering if that was normal or if its only suppose to go down on the partition? im really noob to this who rooting process so please help!
Applications not only store information in the apk, but also other places, /data/data/ for instance.
Delete the partition then see how much space applications use if you want to compare the difference. It could also be browser cache and other things that store information on the phone memory.
Cyanmod rom will automatically do apps2sd if it see a new partition EXT2
You have to do that on your own.
The easiest way I found to do that is use amon_ra's recovery 1.2.3 instead of Cyans
It has an option in the recover screen to partition and add EXT2 .
Now im new to this I dont know how to increase the default of value of XXXmb in ext 2 .
So if some one can chime in and tell me in the simplest way how to change how big the ext2 partition is that would be great.
OP I hope I helped you if you need more help PM me.
Edit I figured it out.
Just use linux to partition ext2/3 and define how much space your sd2apps will use on ext2 partition.
Firstly, BlaY0 has a great tutorial on how to do this properly, I suggest you do that to learn something.
Secondly, I cannot confirm that this is 100% safe. BlaY0's method should be 99% safe, I don't know about this as it is all automatic. BlaY0's method is tried and tested, this is not. I only used this method as I had a new SD card and I was in a hurry (exams coming up ) and I didn't have time to remind myself of BlaY0's method, and CWM only allows you to create up to 512mb partition. Also, I had a new computer, and I don't have time to set up ADB all over again.
Anyway, this is a method for people who don't want to use ADB to partition their SD card for A2EXT or DATA2EXT (a.k.a. apps2sd, etc etc), and are using Windows. If you're running linux, you could use something like gParted to partition it, not sure about OS X though. This method will allow a Windows user to create an EXT partition on their SD card alongside the FAT partition.
1) Download and install Minitool Partition Wizard, from here.
2) Open the program and delete all partitions from the SD card (which you will have inserted into the computer using an adapter or something). DO NOT DELETE THE PARTITIONS FROM THE HARD DISK! MAKE SURE YOU KNOW WHAT YOU'RE DELETING. Oh, and make sure the SD card is backed up
3) Create a FAT32 primary partition. You decide how big you want it, but I'd advise you leave 1024mb (1gb) for the EXT partition.
4) Create an EXT2/EXT3/EXT4 (you decide) primary partition. Use up the rest of the space on the SD card.
5) Click assign/OK/whatever and wait for it to complete
6) You now have your partitioned SD card ready for an A2SD ROM!
7) You need to assign a drive letter to the FAT32 partition. Not sure about the EXT partition. At first I forgot to do this and my card didn't show up in Windows, though Partition Magic can still see it.
Like I said, do yourself a favour and use BlaY0's method here, but if you're lazy or you don't have time or ADB doesn't work anymore, use this.
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB. Well, you're right but that's why I made a customized version of fake-flash that can do bigger... to 1 GB. It can even add second ext partition for some exotic types of data2ext. On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Sent from my HTC Legend
BlaY0 said:
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB. Well, you're right but that's why I made a customized version of fake-flash that can do bigger... to 1 GB. It can even add second ext partition for some exotic types of data2ext. On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Sent from my HTC Legend
Click to expand...
Click to collapse
Ah, I didn't know about your customized CWM, I think I'll just use that next time
BlaY0 said:
Nice one m8. You mentioned that CWM doesn't offer adding partitions bigger than 512 MB...
Click to expand...
Click to collapse
I remember some version had the ext menu up to 4GB
BlaY0 said:
On top of that I added auto block alignment which is described in my guide (the manual one) so no more calculations and manual labour
Click to expand...
Click to collapse
Didn't know that, good to know, for those of us still using data2ext, this is important...
Wish this was up earlier, spent an hour repartitioning my card using parted.Couldn't upgrade to EXT3 and ended up using CWM 3.0.2.8 to do it instead lol
What CWM is using under the hood for partitioning is actually parted.
Sent from my HTC Legend
Tried it but it didnt work not sure what the problem is...
formatted my SD to FAT 32 and reserved 1G for EXT3 both as primary partition in the Mini Partition Tool
Plugged it in my phone,
Ran ADB shell
# a2sd --enabled, rebooted
on reboot nothing seemed to have changed... went back to ADB shell
tried a2sd --free it says A2Sd is not active ...
a2sd -- enabled again and it says it is enabled but not active
so im guessing it cant read or recognize the EXT3?!
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
QkSi1ver said:
Tried it but it didnt work not sure what the problem is...
formatted my SD to FAT 32 and reserved 1G for EXT3 both as primary partition in the Mini Partition Tool
Plugged it in my phone,
Ran ADB shell
# a2sd --enabled, rebooted
on reboot nothing seemed to have changed... went back to ADB shell
tried a2sd --free it says A2Sd is not active ...
a2sd -- enabled again and it says it is enabled but not active
so im guessing it cant read or recognize the EXT3?!
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
Click to expand...
Click to collapse
Take me through what you did, step by step. You say you reserved 1G for EXT3, but did you actually format it as another partition?
QkSi1ver said:
Any clues... i didnt want to move my Dalvik to SD ... should I try EXT4 or even EXT2?
Click to expand...
Click to collapse
It has been mentioned here like a gazilion times, boot up your device with logcat and see the first few lines...there is your answer!
Google how to wait for the device with logcat
1) Downloaded and installed Minitool Partition Wizard from your link. I got the free home edition
2) backed up my SD card and Open the program and delete my SD card partition ( which is in a card reader)
3) Created a FAT32 primary partition of 69xx MB and left the rest 1024 MB for the other unallocated space
4) Right click on the Unallocated Space to create an EXT3 as primary partition with the default cluster size.
5) At this point, it showed 2 partition on my SD, one with the drive letter for windows FAT32, and the 2nd one Ext 3 with 1GB and Primary. Clicked OK and Apply and wait for it to complete.
6) once complete , put it in phone, plugged usb and ran adb shell
7) ran a2sd --enable, it said reboot phone.. i made a mistake to reboot by adb the first time but then did the whole process again a 2nd time using reboot from the phone....
Tried logcat using this command "adb -d logcat>mylogfile.txt"
couldnt find the file anywhere ... if i dont redirect to the txt , it goes too fast to read and there's soo much debug messages what do i need to look for?
I thought it would save me time to get it done through windows... but its taking me as much time it w0uld probably get me with the manual way...
i'll give it a try tomorrow...
8) rebooted fine, and i was still low on space.. so went back in adb sheel to check a2sd --free but this is where it says not active..
QkSi1ver said:
1) Downloaded and installed Minitool Partition Wizard from your link. I got the free home edition
2) backed up my SD card and Open the program and delete my SD card partition ( which is in a card reader)
3) Created a FAT32 primary partition of 69xx MB and left the rest 1024 MB for the other unallocated space
4) Right click on the Unallocated Space to create an EXT3 as primary partition with the default cluster size.
5) At this point, it showed 2 partition on my SD, one with the drive letter for windows FAT32, and the 2nd one Ext 3 with 1GB and Primary. Clicked OK and Apply and wait for it to complete.
6) once complete , put it in phone, plugged usb and ran adb shell
7) ran a2sd --enable, it said reboot phone.. i made a mistake to reboot by adb the first time but then did the whole process again a 2nd time using reboot from the phone....
Tried logcat using this command "adb -d logcat>mylogfile.txt"
couldnt find the file anywhere ... if i dont redirect to the txt , it goes too fast to read and there's soo much debug messages what do i need to look for?
I thought it would save me time to get it done through windows... but its taking me as much time it w0uld probably get me with the manual way...
i'll give it a try tomorrow...
8) rebooted fine, and i was still low on space.. so went back in adb sheel to check a2sd --free but this is where it says not active..
Click to expand...
Click to collapse
Tbh I'm really not sure. One thing I forgot to mention in the guide is that you should assign a drive letter to the FAT32 partition or it won't show up in Windows. I didn't assign one to my EXT4 partition though, and DATA2SD is working great for me. Try deleting all partitions from the SD card and start again. It'll only take 10 minutes, and if it still doesn't work just use the manual way.
Sorry.
alexhtclegend said:
Tbh I'm really not sure. One thing I forgot to mention in the guide is that you should assign a drive letter to the FAT32 partition or it won't show up in Windows. I didn't assign one to my EXT4 partition though, and DATA2SD is working great for me. Try deleting all partitions from the SD card and start again. It'll only take 10 minutes, and if it still doesn't work just use the manual way.
Sorry.
Click to expand...
Click to collapse
Yeah i assigned a drive letter to FAT32...
Also the FAT32 , was my first block allocated partition, the 2nd partition was EXT3... i will redo the whole process and recreate EXT4 instead.
"DATA2SD is working great for me" ... you mean "A2SD working great for me" ... right? unless i'm missing something else that i needed to run..
ps: I recalled, after it was not working, i took out the sd and put it back in the reader to open MiniTool, it showed EXT2 instead of EXT3 ( which i was sure i chose )... and what's weird is it was reporting used space like 41MB... so obvisouly, the ROM wrote something on it...
Formatting it again to EXT3, didnt delete the 41 Used space, but it did convert it back to EXT3 ...probably nothing but mentioning as well
QkSi1ver said:
Yeah i assigned a drive letter to FAT32...
Also the FAT32 , was my first block allocated partition, the 2nd partition was EXT3... i will redo the whole process and recreate EXT4 instead.
"DATA2SD is working great for me" ... you mean "A2SD working great for me" ... right? unless i'm missing something else that i needed to run..
ps: I recalled, after it was not working, i took out the sd and put it back in the reader to open MiniTool, it showed EXT2 instead of EXT3 ( which i was sure i chose )... and what's weird is it was reporting used space like 41MB... so obvisouly, the ROM wrote something on it...
Formatting it again to EXT3, didnt delete the 41 Used space, but it did convert it back to EXT3 ...probably nothing but mentioning as well
Click to expand...
Click to collapse
I suggest you start over, something seems to have gone wrong.
A2SD is where the apps are stored on the EXT partition.
DC2SD is where the dalvik cache is also stored on the EXT partition.
DATA2SD is where the entire /data partition on the phone is stored on the EXT partition of the memory card.
Partitioning the SD card with a FAT32 partition and EXT partition is done first, then you decide which one is for you. DATA2SD does have one or two issues, such as the risk of corruption - you'd then have to completely reinstall the ROM. A2SD and DC2SD are fine but I still found myself running out of internal memory.
i gave up and used ROM Manager to create my partition ...i couldnt set it to 1G because 512MB is maximum but it was painless to create.
it asked me to create a swap partition... i've read somewhere that swap partition is useless or barely used in newer android os? do you guys have any swap partition if so how big are they?
Also, did you move Dalvik cache to sd? isnt it slower on SD? i mean shouldnt dalvik cache be on RAM whihc i assume is faster than any external sd?
thanks for your insight
QkSi1ver said:
i gave up and used ROM Manager to create my partition ...i couldnt set it to 1G because 512MB is maximum but it was painless to create.
it asked me to create a swap partition... i've read somewhere that swap partition is useless or barely used in newer android os? do you guys have any swap partition if so how big are they?
Also, did you move Dalvik cache to sd? isnt it slower on SD? i mean shouldnt dalvik cache be on RAM whihc i assume is faster than any external sd?
thanks for your insight
Click to expand...
Click to collapse
I used the full DATA2SD, which includes Dalvik2SD.
ok so sorry for a double post but im having an issue partitioning.
32 gb card san disk brand new
primary Fat32 10gb
primary Ext2 rest of space
once mini tool is done it sats successful but shows the sd card as Bad disk?!?
is there somthing im doin wrong? is used this guide here http://forum.xda-developers.com/wiki/SD_card_partitioning
all help deeply appriciated
Acer Iconia Tab A110 rooted, Cwm, 4.1.2
Can you actually have a 22gb ext partition? This might be something to look into to see if you can do it.
Edit: this got me interested so I searched myself, yes you can but apparently it depends on the chosen block size and hardware limitations, so u may have an issue with either.
Sent from my Legend using xda app-developers app
alexhtclegend said:
Firstly, BlaY0 has a great tutorial on how to do this properly, I suggest you do that to learn something.
Secondly, I cannot confirm that this is 100% safe. BlaY0's method should be 99% safe, I don't know about this as it is all automatic. BlaY0's method is tried and tested, this is not. I only used this method as I had a new SD card and I was in a hurry (exams coming up ) and I didn't have time to remind myself of BlaY0's method, and CWM only allows you to create up to 512mb partition. Also, I had a new computer, and I don't have time to set up ADB all over again.
Anyway, this is a method for people who don't want to use ADB to partition their SD card for A2EXT or DATA2EXT (a.k.a. apps2sd, etc etc), and are using Windows. If you're running linux, you could use something like gParted to partition it, not sure about OS X though. This method will allow a Windows user to create an EXT partition on their SD card alongside the FAT partition.
1) Download and install Minitool Partition Wizard, from here.
2) Open the program and delete all partitions from the SD card (which you will have inserted into the computer using an adapter or something). DO NOT DELETE THE PARTITIONS FROM THE HARD DISK! MAKE SURE YOU KNOW WHAT YOU'RE DELETING. Oh, and make sure the SD card is backed up
3) Create a FAT32 primary partition. You decide how big you want it, but I'd advise you leave 1024mb (1gb) for the EXT partition.
4) Create an EXT2/EXT3/EXT4 (you decide) primary partition. Use up the rest of the space on the SD card.
5) Click assign/OK/whatever and wait for it to complete
6) You now have your partitioned SD card ready for an A2SD ROM!
7) You need to assign a drive letter to the FAT32 partition. Not sure about the EXT partition. At first I forgot to do this and my card didn't show up in Windows, though Partition Magic can still see it.
Like I said, do yourself a favour and use BlaY0's method here, but if you're lazy or you don't have time or ADB doesn't work anymore, use this.
Click to expand...
Click to collapse
Hahah! Thanks for you detail guide. It is so helpful for me!