Every once and a while I'll get this error, but then out of the blue it will connect and I won't have any problems with it for good period of time.
Seems when I connect to Active Sync it messes with my connection settings and then it'll give me the "Error Synchronizing" message.
Then it pops up with "Cannot connect with current connection settings"
it could be a E/2g/3g thing (if you are in the US). At home I only get E if I'm lucky and I cannot sync with the same error. But as soon as I leave I can connect with no issue. Sorry if this is no help and good luck
Related
Hi all-
I've installed (and reinstalled) the drivers off the At&t cd for dial up networking, and am having some issues connecting either by bluetooth or USB. I switch wireless modem on, select the connection type and click start, and i get the following errors-
Bluetooth- opens port, attempts to dial (green and blue lights blink on device) and error 680- no dial tone
USB- multiple error messages: opens port, dials,
error 692 hardware failure in modem <==== Most Common
error 619 "connection to remote computer could not be established, so port was closed" (Freezes on "Registering your computer on the network.")
error 777 connection attempt failed because modem or remote computer is out of order
The APN setting has the "preset GPRS connections" box checked and access point is "isp.cingular"
Is there something I'm missing? Please help!
UPDATE: This issue occures on multiple computers, so is there something I need to change on my phone?
I don't know what I did, but for some reason, I am getting no phone service, my calendar and contacts are unavailable, I can't retrieve email from the exchange server (i get a message that there was an error syncing) and my device won't sync with my computer. I can still connect to the internet without a problem.
When I go to the phone settings and click on "find network" I get a diaologue box that says "registering on the network", but it only lasts a few seconds and nothing happens. Does anyone have any ideas?
Edit: i am using the Tilt rom and I have AT&T service
I have a tilt and i'm trying to get it setup to get on the internet on my laptop via usb, i have the usb connected to my laptop and i see active sync comes up, i went to the connection settings under file and try to connect, but it doesn't, i see usb under one of the options and i select it and hit connect and it tries to connect but doesn't, i don't get any error message or anything, just no connection. i have the unlimited data plan, but no tethering, but from what i've read on here you don't need the tethering if you aren't going to use it much. any tips on how to get the net on my laptop doing this?
Try reading the Wiki. Your answer is there.
...And try searching next time.
Strange issue with my Tilt... when my apps try to connect to the internet using MEdiaNet they just close out... when I use them on a wifi connection they work with no issues.... Internet connection sharing also works fine when I tether to my laptop....
Currently using ROMeOS 3.5
Any ideas?
---UPDATE----------
After a hard reset this is the current status-
Apps are no longer closing out but some are getting a "cannot connect with current connection settings" message
PIE- connects with no issues
Google Maps- connects with no issues
Internet Connection Sharing- connects with no issues
Skyfire- Does not work... keeps on checking for flight mode
Email- Does not work- "cannot connect with current connection settings" message
is
settings->connections->connections->advanced->select network
set to my isp or whatever your device have named the gprs settings profile
if not change it so it is
Also if you have at&t go to start/settings/connections/connections. You should see MEdia Net with options underneath and My Work Network with options underneath it. Underneath MEdia Net, click the option set up my proxy server. Disable the option that says "This network uses a proxy server to connect to the internet." Hope this helps
I started having the same problem the other day. My pocket outlook will not connect using Media Net, I get the "Cannot connect with current settings" message. i didn't change anything before this started and I have tried all of the above suggestions. Does any one have any other suggestions? I will do a Hard reset only as a last resort. Thanx
Has anyone been able to get this to work?
Trying it on Rogers in Canada and keep getting the "cannot connect to SNG server" error.
http://mobilerumor.blogspot.com/2010/05/lg-ally-socialite-app-download-for.html
I can get it to work sometimes, but then get an "Unable to connect to the SNG server" and "Unable to update feeds" CONSTANTLY.
It makes this widget completely and utterly useless.
Does anyone know of a fix for these?