Plz Help Me.....
I Cant Connect My Mobile To Pc Via Activesync Whenever I Upgrade To Windows Mobile 5. I Had The Same Problem Even In Tuma v1.3...
I Have ActiveSync v4.1.0 (Build 4841)
And So I M Not Able To Copy All The Files Of Ext Rom.....
Plz Someone Help Me...
AS 4.2 went final the other day, try the latest version. AFAIK it contains a lot of bug fixes.
Also, some people have problems when plugged into a USB hub, try a direct connection or even another port.
Did you check and see if your mobile network setting (local PC) is set correctly?
Goto My network --> Properties
and you should see a netowrk connection for Windows Mobile Device.
Go to properties, and enable the Internet Protocol for the device.
i'm really keen to get this issue fixed.. any suggestions would be appreciated.
i have just downgraded from WM6 to WM2003SE (o2 XDA offical rom 1.40 for AUS) and i cannot sync the device anymore.
i have completely set the device back to it's original state, ext rom, main rom, radio rom. the PDA itself works fine, no issues there.
i receive an error when i try to sync with my laptop.. (which it used to sync with when i put WM6 on the device).
the error is - cannot verify the version of activesync on your device, a program such as a firewall may be blocking a port activesync uses to connect to your device, you may need to upgrade to a more recent version or activesync
i have removed activesync, deleted all the registry entries, folders and files relating to activesync that i could find. reinstalled activesync, still no luck.
-> i can get the device to sync with my desktop without any problems (i never used the desktop to sync to it when WM6 was installed)
however all my data is on the laptop.
Any ideas ?
update
here is an extract from the log..
**** ActiveSync (4.5.5096 RETAIL) started, Cmd line: '/onconnect'
10/08/2007 16:07:14.324 Creating new partnership for device 0x0 (Pocket_PC, PocketPC).
10/08/2007 16:07:14.324 Error 0x8000BADD: Failed to get version number from device.
10/08/2007 16:07:15.927 Creating a guest connection for device of type 'PocketPC'
-> i can't get into the screen to clear the storage and hive..
i can get into bootloader.. can't get it to work when i press power, reset, camera and record.. just goes into bootloader.. or the numbers come up on the bottom..
could there be some residual information left behind from the previous install of WM6 ??
how do i set the version no manually ? is this done in the PDA registry ??
I don't remeber having this problem. All you can do it try to downgrade ActiveSync to one of the older versions.
There used to be an option to disable advanced network functions under USB to PC in the connections folder. In WM 6.5 I am unable to find such an option and Vista won't detect the phone.
Please help as I need to flash to an older ROM that will work with Navigon 7.31, which btw, anyone have recommendations?
Thanks.
usb to pc
Go to Start, settings, connections, usb to PC and uncheck "enable faster data synchronization.
Hi,
I have a Diamond which I've recently flashed with Gen.Y's R5 NLD rom and radio 1.17
At first everything was fine. However, since a few days when I connect the diamond to my (windows 7 x64) PC I get a message "USB Device not recognized". I've reinstalled Mobile Device center to no avail.
I've also tried unchecking "Enable advanced network functionality", but that neither helped.
Luckily I can synchronize activesync through bluetooth, but it's really slow, also for files.
Internet connection through USB works fine though.
Anybody got an idea what I could do?
here to help
1. make sure you have the latest windows mobile device center
2. plug the device into usb port
3. go to control panel administrative tools - computer management - device manager
4. click on universal serial bus controllers and uninstall any usb root hubs and usb composite device
5. unplug the device
6. restart the computer
7. plug in your device
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
try changing the usb port
i've tried but didn't work
try reboot sometimes computers start on the whole unknown usb device
and the only cure is reboot
is the only solution?
it's possible is an hardware issue?
Re-install WIN 7
If rebooting too doesn't work then i recommend re-installing Win 7, it hardly takes half an hr..
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
i'd uninstall wmdc even search and remove any traces of it in regedit
of cause if you reinstalled win7 from scratch that should happen automaticly
or I would try connecting it to another computer to verify that the device connector was not damaged
it's possible is an hardware issue?
because the pc recognise my diamond with bluetooth
news
my pc recognize my diamond with bluetooth but for the usb port nothing...
i've tried to install a new rom version but nothing...
how i can install an original bootloader from internal storage?
as I said try connecting it to another computer xp with activesync or later with wmdc
anything
you don't need to sync or anything just detect it if works you could even use a public library computer if they are not too locked down
thats how you detect if the connector in the phone have been damaged
about doing it from Internal storage I'd suggest you check the wiki
http://wiki.xda-developers.com/index.php?pagename=HTC_Diamond
maybe around the "Upgrading / cooking / flashing:" section
i think the usb connector on the phone is broken
the only solution is the assistance...but i have the hardSPL inside my phone!!!
Try it on another PC .
i've tried...but nothing
windows fault
This is actually a problem with windows.
I had the same issues but solved it by fiddling with the device manager. This is slightly more advanced than just plugging the phone in but it's not that hard.
Also you can check to see if this is really a problem with the phone. Try to connect the phone in disk mode (so it registers as a memory stick). If it shows up it means it really is windows having some issues detecting the device.
I have the same problem, but when the TD is in disk mode no problem at all
stronkyz said:
hi guys!
when i connect the diamond at my pc, windows 7 tell me: unknown device
i have installed the wmdc and yesterday my pc recognize my diamond!!!
what i can do?
pls help me!!!
P.S. i've tried to reinstall the wmdc but don't work
Click to expand...
Click to collapse
STEPS (on HTC TOUCH DIAMONF):
1. START
2. SETTINGS
3. CONNECTIONS (tab)
4. USB TO PC
5. UNCHECK "Enable advanced network functionality"
6. OK
Try now to connect your HTC with your PC (Win 7)
stronkyz said:
i tried to change the cable, to change the port usb,reinstall wmdc, format computer, hard reset, another computer...but nothing...
what i can do?
Click to expand...
Click to collapse
may be you could change diamond's rom