i just got myphone today with tmobile and i am trying to flash the spl so i can flash a rom. as i go thru the process it after the phone goes in to sleep mode and it checks for update on the computer the program tells me it faild check ur usb connection plz helppp
You should really post in the sticky HardSPL thread.
Related
Hi
I am following the guides at
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
and
http://forum.xda-developers.com/showthread.php?t=399827
Now I downloaded HardSPL 1.20 mentioned at
http://trinityguides.info/index.php?option=com_content&task=view&id=25&Itemid=66
and also tried the one at http://www.mediafire.com/?yxz2pu1oytg
I have installed USB driver on VISTA as per guide. my Bootloader shows USB.
But whenever I try to install either of the SPL it gives me an error
ERROR [270]: UPDATE ERROR
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
Please help me with this
Ok Fixed problem
Perfect solution here
http://forum.xda-developers.com/showpost.php?p=2298295&postcount=6
Connect to your PC and make sure activesync has run properly and your phone is on.
Open Hard SPL and run the ROMupdate. Your phone will go to tricolour and it will come up with a communication error.
disconnect from PC but leave the phone in tricolour....DO NOT reset it.
Cancel our of the ROMupdate. connect the phone to the pc again and run ROMupdate again.
This time it will go all the way through and you will have HardSPL on your phone.
Check it by entering bootloader and it should show Olipro 3.2.
You can then flash away....make sure you always put the phone into bootloader before flashing.
Click to expand...
Click to collapse
Flashing now and will update soon
Please help me. I am desperate.
I have flashed my Telus HTC Touch Diamond with the "Telus_shipped french" ROM, following steps by steps the guide "Flashing a Rom or Radio from the 4 gig internal storage ".
My phone is stucked at the rainbow screen showing the following error message: "upgrade ROM code error. Please try again". No hard reset, no nothing will fix it.
Thx
connect it to ur pc when its in bootloder (the rainbow screen) where it says serial at the bottom it should now say usb, now just use a ruu to flash a new rom
Thank you so MUCH mancsoulja. I did not try it because after the flash my PC was not able to see my Diamond through the USB connection, so I thought that...
Just a question. How do I know if I should use the ROM for CDMA phone or the one for GSM?
My Phone will not start up.
I installed hard-SPL 1.56 no problem with that then hard reset then I tired to put on the miri wm6.5 rom v26.3. it installed ok but now phone will not go any further that the smartphone logo and the red numbers in bottom corner that it turns of then on again and repets this cycle over and over again till i have to take battery out to stop it.
What do i do.
hard reset followed by reflash...
was caused due to a bad flash..
how do I do a reflash. I have tried a hard reset but still have prob
dnload the rom again..
enter boot loader..
connect phone to pc
run the ruu utility from the dnloaded rom..
ok will try ta very much. What happens if I can not get my phone on and synced with pc again?
paulthom said:
ok will try ta very much. What happens if I can not get my phone on and synced with pc again?
Click to expand...
Click to collapse
You don't need to sync phone to flash. Just put phone into bootloader, connect it via usb cable to pc. (bottom of bootloader should change from 'serial' to 'usb') and then run ruu.exe file
Post future flashing queries in dummies guide thread (sticky at top of this forum)
hey guys, tried flashing my rom, after flashing it boots up in stupid horrible colors and gets stuck on allignment page so doesnt boot completely. Any ideas would be mucho appreciated. thanks
You forgot the flash the 1.56 spl from olinex
Download it. set your device in bootloader, connect via usb and wait for the serial on the bottom white part to turn into usb and fire up the app. Youll probably have to reflash after that but it will work
Follow the instructions here: http://forum.xda-developers.com/showthread.php?t=505377
every time i go to bootloader it wont establish a connection to the computer.......this is the main problem
you don't need any connection to the PC, be it active sync or whatever. just
plug in the phone in bootloader into your usb port, wait for it to show USB and then flash either wirh HSPAL or USPL
but srlry, just read the howto guide!
read the how to guide........im not that dense mate! something just went wrong it happens........even when i try it without establishing a connection to activesync it wont install and says theres an error on the ruu
I hope you're doing this on a XP machine.
Phone in bootloader -> Plug-in USB -> Flash SPL
If you could tell us your step-by-step procedure, it would help us try to resolve your problem.
As above posts have stated. Follow the Dummies Guide and you'll be fine. Please post further flashing queries within that thread
Thread closed
Hello!
I have this problem:
I've installed WM6.5 on my Trinity, and it worked well, but today I wanted to try WM6.1 (0.4.9.0 digital) also. The following happened:
Everything worked fine, but at 54% flashing my brother lifted the phone, possibly it lost the USB-contact, because the flasing stopped with an error message (unfortunately can't remember the error number). Since then if I try to flash it with WM6.1 or WM6.5, after 1% the phone resets itself, and the RUU gives a 270 error.
I have the original WM5 ROM also, but if I try installing it, after "Verifying information on your PDA Phone" screen I get a connection error 260.
What can I do???
After the phone resets itself, I can see the HTC logo, and the red letters and numbers, but that's all.
If I try HardSPL, I also get a 260 error.
Can you enter bootloader manualy?
If you can than see SERIAL change to USB when connected to PC it should be OK.
if you have a SD card, you can also try to flash "manualy".
- put your RUU... NBH at the root of the card,
- rename it trinimg.nbh,
- reinsert the card in the phone,
- enter in bootloader (power+cam+reset)
you will have a grey screen asking to push "power", do it and that's it.
if USB is well working, maybe you just need to reflash the hardspooler.
Thank you for your replies.
Fortunately I solved the problem.
I did the following:
1. To be sure, do all the stuff on a Windows XP machine
2. DISABLE "Allow USB Connection" in Active Sync so you see a small red X symbol next to the Active Sync symbol
3. Start the device into Bootloader mode (Cam+Power+Reset) and connect the device to your PC and make sure USB is written on the bottom of your screen (NOT Serial!)
4. Download splxploit (http://forum.xda-developers.com/atta...0&d=1180043588) and execute unlock on your PC
5. Follow the instructions
6. Download HardSPL (http://forum.xda-developers.com/atta...8&d=1185364317) and follow the instructions
7. Finally (to be sure) restart into Bootloader mode and check if SPL is showing "SPL-1.30.Olipro) - if this is the case you've done it !
8. Flash your preferred ROM via miniSD or USB connection
I m glad you solved this. Every day another new way of solving the flash problems.
Hi to All guys
i've got a trinity from my work and it has a custom rom.
I wanted to changed the rom so i download a wm 6.5 and erase the trinity with mtty. After that i try to install the rom with he RUUUupdate, but it get error 270.
Only in that moment i read on the bootloader and see that it haven't olipro or another HARDSPL installed.
So i looked for a solution and i try the unbrick with the splxploit. I did it and i get olipro on the bootloader, but i don't know how go on with install, if i use the exe i get 260 connection error.
Can you help me?