This is probably an obvious answer kind of question, but I am super new so bear with me!
Can I get Manila 2.5 on my CDMA TP? Does it require a flash? I've never flashed before!
Haida1 said:
This is probably an obvious answer kind of question, but I am super new so bear with me!
Can I get Manila 2.5 on my CDMA TP? Does it require a flash? I've never flashed before!
Click to expand...
Click to collapse
You can find cabs for the Manila 2.5 to allow you to add it to your rom that you are using like the other Manila. You can use the search in the formus to allow you to find them. Good luck.
ive benn having trouble adding the mania cab to my rom it does not show up im using ervius package creator
go to the ROM development section. My best bet, just flash your TP to a new ROM
I just flashed my first ROM and it's easy and definitely worth it; just follow the directions in the CDMA section carefully.
I tried to DL the cab but it always fails on installation. Says that I dont have the specifications.
Related
I'm quite the newbie when it comes to ROM cooking, quite lucky to have a P4350 so I can mess around a bit w/o worrying about bricking the phone. I was able to flash the t-mobile dump using this method:
xander803 said:
I'll try to detail out exactly what I did. The rom kitchen was used for every single step. The directions provided with the program are not comprehensive but done well enough that you can figure most of it out.
1). Use the extract tool and choose "dump from bin" and dump the wing os bin posted on the first page. This dumped the contents to a directory in xdump.
2). After this "pkgtool" will run to separate out the sys and oem folders.
3). Move the contents of "xdump" (which should be the sys and oem folders and maybe a couple other files) into the "kitchen" folder.
4). Place the XIP folder and Aserg's os.nb, both of which are found in this thread, into the "ROM" folder. Aserg's os.nb will have to be renamed, check for details in the rom kitchen help file.
5). This is the step where cooks can delete/add stuff but I wouldn't recommend it your first time through.
6). Run "Build" and it should automatically create your new os.nb. We don't need to do any of the conversion afterwards because we can just put this os.nb in place of Aserg's os.nb and use his method to flash.
Please read through the rom kitchen's help manual as well as Aserg's help file for flashing the herald and make sure you understand exactly what you have to do. If you don't have an unbranded Herald it may be difficult to recover from a bricked device. I bricked my device several times before getting it but luckily I have an unbranded Herald so I could just flash an official WM5 WWE back on. Lastly, do this at your own risk, this worked for me but may not work for others.
Click to expand...
Click to collapse
What I wanted to know is what I would have to do to switch the T-Mobile rom with the PdaViet rom in this process of cooking. I have tried various methods, but have had no luck right now. The ROM image I create hangs at the initial bootscreen.
Also on another note, not sure why this is but when I extract the PdaViet rom and then compile it back together using the Pro Kitchen, the new image is always a bit smaller (like I missed something.)
Question: How did you CID unlock your device?
I didn't have to CID Unlock to upgrade.
Well I found out that its normal for the rom size to shrink using the Core Pro Kitchen, this is because of Tadzio's program. What I can't seem to figure out is why I can't flash the new build of the PdaViet rom without it freezing at the first splash screen. At first I thought it was the missing .rgu files found by , but I have found out that those were taken out for a reason, so that cancels out one potential problem.
We just have to wait a little more. Anichillus is trying to creat the Kitchen for the herald as he promised it. But now after exams he is in holiday. But after that he will present a new kitchen. Just wait a little.
And yes - his kitchen compresses the files more than other.
Keep on working and cooking. The Heraldforum needs it really...
I never liked PDAViet roms - so let´s creat own ones...
Thanks
Thanks for the update, and only reason I wanted to use the PdaViet rom is cuz it has the newest build. Guess I'll just work with k0ster's release.
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
blackout203 said:
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
Click to expand...
Click to collapse
Be careful. When it get bricked whiel falshing there is NO chance to unbrick with Herlad RUU!!!
Believe me and don´t try it
Hope you will allways have success while flashing with Asergs Method
blackout203 said:
Yeah man, i'll beta test any roms you create, I just paid to have my Wing CID Unlocked and i'm trying out PDAVIET's rom's now.
Click to expand...
Click to collapse
I thought you couldn't CID unlock the Wing.
^^imei-check. It worked so far. No other wing user has tried, I don't believe, i'm the first guinea pig.
So I just started to cook ROMs for the herald and I have to say it is a long and enduring process, but simple enough that anyone who wants to learn is able to do so.
For anyone else who is interested I am using the Core Pro Kitchen to build the roms, using this rom as my base (very clean-also good rom to load to your phone directly. Doesnt have missing files unlike PdaViet rom when running PkgTool.)
http://forum.xda-developers.com/showthread.php?t=319142
I also found a very useful selection of OEM cab packages that work with the herald for the most part. If they dont a simple edit will do the trick.
http://forum.xda-developers.com/showthread.php?t=319970&highlight=rom+kitchen+guide
Even a newb can cook up a rom using this method so there ain't no excuses.\
Cheers
So by all means all P4350 users start experimenting and cooking up ROMS so that Terra and Wing users have something to look forward to when they have an RUU.
Which version of Core Pro Kitchen are you using? The one for Hermes?
BRSG said:
Which version of Core Pro Kitchen are you using? The one for Hermes?
Click to expand...
Click to collapse
anichillus told me that the artemis version should work.
BUT write an pm to him and he will give you a link to his "Hyper Core Kitchen" the complete new one!!!!!!!!!
Give it a try
im going to try this out again and see if I can cook something up. I tried and actually created a rom be4 but was too scared to try it out. ill see if I can have a release by the end of the week but my computers been acting up. imma try to get the touchFLO working also.
neptune, post your cooked rom up or post some pics. did u do a traditional rom or one with the Touch home plugin and stuff?
http://forum.xda-developers.com/showthread.php?goto=newpost&t=323166
Would you be able to add that into your rom? It's a button free activation of the 3D Cube!
i'm currently cooking a rom using the Artemis kitchen, i'll post up how it goes, main issue for me is trying to make sure i'm putting packages in the right folder. I downloaded a .rar full of pre-mad packages so all I gotta do is drag and drop. i'm using k0ster's rom as a base but would love to use the official wm6 that was just released as a base as its newer and cleaner i'm guessing. we'll see, maybe we'll see some cooked roms from me soon!
blackout203 said:
i'm currently cooking a rom using the Artemis kitchen, i'll post up how it goes, main issue for me is trying to make sure i'm putting packages in the right folder. I downloaded a .rar full of pre-mad packages so all I gotta do is drag and drop. i'm using k0ster's rom as a base but would love to use the official wm6 that was just released as a base as its newer and cleaner i'm guessing. we'll see, maybe we'll see some cooked roms from me soon!
Click to expand...
Click to collapse
It should be better to extract the REAL WM6 rom with nbhextract and then start cooking the rom with the kitchen for Artemis (anichillus Core Kitchen??).
ANd be sure - in about one week there will be a new kitchen from him
But please use the real OS. Not a ported one!!
^Alright, i'll try that tonight. What is the major files that people remove? (Transcriber, etc.)
blackout203 said:
^Alright, i'll try that tonight. What is the major files that people remove? (Transcriber, etc.)
Click to expand...
Click to collapse
transcriber, autoupdate, sql
Thanks papamopps!
Will you please test out my rom when it is released
does anyone know where I can find the .cab's? I tried a ROM that had them, but I didn't like the overall rom so I switched back to SNE's TouchNoEvil rom but I'd like to add the cube
It's not warez is it?
Does anyone have these, or are they not allowed to be posted here? I mean, they are used in ROMs
gvalergas said:
Does anyone have these, or are they not allowed to be posted here? I mean, they are used in ROMs
Click to expand...
Click to collapse
I dont think it is warez cause it is posted in other treads for all types of phones. I downloaded them and installed them on my 8125 and they worked perfect. I was looking for a Touchflo that can be installed, not have to bake into the ROM. Get a good fast & stable ROM, then install the extras.
lotw said:
... Get a good fast & stable ROM, then install the extras.
Click to expand...
Click to collapse
The problem is finding these extras
One out of two aint bad
I used this, added the customizer, and love it!
http://forum.xda-developers.com/showthread.php?p=1685213
No cube, but the htc home plugin...
Hi, there is a cab that will install the touchflo http://forum.xda-developers.com/showthread.php?t=345350 but its a French version. I just tried installing on my wizard mobile 5 and it didnt work.
Was about to start a new thread if anyone knew if it was possible to have touchflo on the wizard and mobile 5.
Hi, I was just about to update my kaiser phone to duttys latest rom, however I read the all important thing do not update unless you have 6.1 professioanl compatible radio.
I have done a few searches and i'm not sure what exactly I am looking for, can someone please tell me or point me to a link which will install windows mobile 6.1
I take it before any rom updates are done I should install that Hard-SPL thing or whatever its called first
Read this and choose one of the 6.1 compatible ones.
unwired4 said:
Read this and choose one of the 6.1 compatible ones.
Click to expand...
Click to collapse
A lot of people think that the Polaris radios work best from this link. I've tried them all and they all seem ok for me - but at the moment pretty much anything above 1.58.xx.xx will work with a wm6.1 rom - however you might need to try a couple if you have problems.
unwired4 said:
Read this and choose one of the 6.1 compatible ones.
Click to expand...
Click to collapse
Hi thanks for the link, however I am a dummy at present and I cant tell which one i need to download, they all say 6.1 compatible, but as I dont have it installed i cant download it.
I just need one to upgrade from 6.0 to 6.1
A location to a couple of files download will do as opposed to looking at a thread as i dont know what i need
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
There out their! LOOK! MightyROM is so far the best you just need Fave People, the picture mail app that sprint didn't make, and change the location the photos save at to using advance config
agentmikeyd said:
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
I am running Calkulins Ver. 4, and loving it.
agentmikeyd said:
anyone running this OS on their Diamond? If so, please link to download, and provide details on if it works well, smoothly, bugs, etc. I have searched but do not find a hardspl for my cdma diamond.
my understanding is I need to:
1. download 6.5 hardspl for Sprint cdma diamond
2. update the rom after the hardspl is loaded
Please correct me if I am wrong.
Thanks
Click to expand...
Click to collapse
Man ... get yourself over to PPCGeeks and the Diamond upgrade forum. Plenty of info and roms to choose from.
note: the forums have been up and down the last couple of days, so you may have to wait until the issues are dealt with.
wmdunn said:
Man ... get yourself over to PPCGeeks and the Diamond upgrade forum. Plenty of info and roms to choose from.
note: the forums have been up and down the last couple of days, so you may have to wait until the issues are dealt with.
Click to expand...
Click to collapse
Precisely.
My favorites would be
STX
Mighty 6
Demolition
SSK
in that order as far as 6.5 is concerned. For 6.1, I would say Mighty 4 and intx 2.5 or premiere.
im running EnergyROM and love it
I'm on Mighty Rom 6, but the battery drains quicker than my stock rom. Any idea why?
Forgive the noob question but...If I install a cooked ROM on my Telus Diamond will I still have Telus functionality as in cell service, etc? Would Telus be able to tell and then cut my service or something? What would be the ramifications of installing another ROM? Other than the risk of bricking my device what, if anything, would I lose.
expire in 30 days
got it running great thru juicy rom , 6.5 is awesome, but says will wm6.5 pro will expire in 30 days. What?!?
ok i have an att htc tilt 2 stock and i want to get the co0kies home tab on it but i have downloaded it and can figure out how to use it. i think my phone has manila/sense 2.1 im not sure tho. all i know it that it has touchFlo 3d on it. i would like to get the manila 2.5 if i dont already have it and i would like to get co0kies home tab. do i have to download the chteditor to use co0kies home tab. i download the chteditor but when i went to open it a message came up say i had mismatch software or something. also what the best way to get .net 3.5 on my phone? i read the thread for first time flashing for noobs but i just dont know if i have to do all that to get what i want.
plz help...
the-new-guy said:
ok i have an att htc tilt 2 stock and i want to get the co0kies home tab on it but i have downloaded it and can figure out how to use it. i think my phone has manila/sense 2.1 im not sure tho. all i know it that it has touchFlo 3d on it. i would like to get the manila 2.5 if i dont already have it and i would like to get co0kies home tab. do i have to download the chteditor to use co0kies home tab. i download the chteditor but when i went to open it a message came up say i had mismatch software or something. also what the best way to get .net 3.5 on my phone? i read the thread for first time flashing for noobs but i just dont know if i have to do all that to get what i want.
plz help...
Click to expand...
Click to collapse
Just download the .net 3.5 cab. Search for it, it's everywhere on this forum. Install it and cookie should work.
the-new-guy said:
ok i have an att htc tilt 2 stock and i want to get the co0kies home tab on it but i have downloaded it and can figure out how to use it. i think my phone has manila/sense 2.1 im not sure tho. all i know it that it has touchFlo 3d on it. i would like to get the manila 2.5 if i dont already have it and i would like to get co0kies home tab. do i have to download the chteditor to use co0kies home tab. i download the chteditor but when i went to open it a message came up say i had mismatch software or something. also what the best way to get .net 3.5 on my phone? i read the thread for first time flashing for noobs but i just dont know if i have to do all that to get what i want.
plz help...
Click to expand...
Click to collapse
CHT requires Sense 2.5. The best way to get CHT is to burn a ROM for it, either with Sense 2.5 or with CHT already burned in.
thanks to both of you but how do i go about burning a rom with sense 2.5 on it
the-new-guy said:
thanks to both of you but how do i go about burning a rom with sense 2.5 on it
Click to expand...
Click to collapse
You can either get an official ROM from AT&T, if they've done one with Sense 2.5 (sorry I don't know). Or you can HardSPL your phone (see the sticky thread) and use one of the custom ROMs from this forum (just take a look, there are loads with Sense 2.5, including ones with CHT already cooked in). Details of how to flash a custom ROM are in one of the sticky threads.
Edit - I just did a quick search, and I couldn't find details of any official AT&T ROMs with 2.5, so I don't think that's an option (unless another Tilt 2 owner can provide some info to the contrary).
sweet! now if i flash my rom can i flash it back to the stock rom if i have to do a warranty swap or something. and where exactly can i find the built roms? i also looked in the my first rom flash for noobs and it said some thing about the model id or something that if its a world phone i can use that hardspl or something?
You can flash back to stock for warranty return, yes, you just need to get hold of a copy of the stock ROM for that (which should be easy). You'd also need to un-do HardSPL and reflash the stock SPL (again, not hard).
The built ROMs are all in this forum ! You'll see lots of threads with details about them, they're the ones with all the square brackets in their names, showing you the OS version, Sense version, any other add-ons (like Cookie/MaxSense/etc) and so forth.
If your phone is a Tilt 2 then it's a GSM phone and you need to use the HardSPL/radios/ROMs in this forum. The "worldphone" that that bit is referring to is the CDMA phone which uses different stuff. This can be confusing since the term "worldphone" can be used to mean different things. If you take out your battery, then the model number will be written near the serial number, it will be I think "RHOD300" for a Tilt2.
how would i un hardspl? also thanks for all the help is there any way i can add you to a friends list if i have any other questions?
There are instructions in the HardSPL thread about how to re-flash the stock SPL.
steviewevie said:
Edit - I just did a quick search, and I couldn't find details of any official AT&T ROMs with 2.5, so I don't think that's an option (unless another Tilt 2 owner can provide some info to the contrary).
Click to expand...
Click to collapse
You are correct. The stock AT&T ROM came with TF3D, and given AT&T's history that's the ROM it will die with.
the-new-guy, please see mskip's great thread on flashing here. http://forum.xda-developers.com/showthread.php?t=550540 Even though I'm not exactly a noob, I still referred to the instructions there before flashing my Tilt 2 for the first time.