Related
Hi,
I have a problem with my Wizard, my rom update failed because the pc reboots in the middle of the installation and now only the Red Green Blue screen appear with three things, IPL 2.17, SPL 2.17 and in the right top corner RUU.
I can't enter in the bootloader (pressing the camera button and turn on)
What can i do to fix this and update a new ROM?
Thanks in advance.
....... while on that screen plug in the usb cable and re-run the update utility.... Since the RBG screen is the bootloader...
I tried to do it, but i get ERROR[300] : INVALID UPDATE TOOL in the PDA Phone ROM Update Utility 2.00.1
Thanks
is working now. tks anyway
I'm having this same problem... not sure what's going wrong.
msmobiles.com:
Q: If I encounter ERROR [300] : INVALID UPDATE TOOL, what should I do?
A: This error message will appear when you use the incorrect RUU to upgrade. Please make sure you use the correct RUU version to upgrade.
Click to expand...
Click to collapse
Normally, you can only flash an official rom to restore from the point you are at. Once the bootloader is the only thing that comes up, a custom rom will not do the trick.
Once you have the official rom installed, you can then "cross-grade" to a custom rom.
_Nomad_ said:
msmobiles.com:
Click to expand...
Click to collapse
Ok, so using some Italian version is working for me. RUU is the same as the pda phone updater tool right? But something is still going wrong. It says I now have OS 2.26.10.2, which is the molski rom I've been trying to get on here, but neither the ipl or spl change, and the same cingular settings keep loading.
Man this is confusing me.
I have paid to unlock my g4, and I still can't get it to work the way I want it.
I currently have AKU3.2-1.0RC1.
What do I have to do to install RUU_Molski.Biz_AKU2.3-226102_22610105_024711_WWE-30MB-CF2?
Also, Molski mentioned I need an Extended ROM - how do I install that?
Thanks guys.
Tried RomUpgradeUtility_noID .....there was an Error 240 =(
Error 300:
Error message will appear when you use the incorrect RUU version to upgrade.
Error 240:
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
_Nomad_ said:
Error 300:
Error message will appear when you use the incorrect RUU version to upgrade.
Error 240:
When this error message appears, check whether the downloaded image is placed in the directory of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again.
Click to expand...
Click to collapse
O i got that. that's from the Readme file.....
But what does that mean?....like.can you suggest the next step? =)
Well... I'd suggest that you use this ROM to downgrade with. You should be aware that this ROM also downgrades the ipl/spl so make sure that after flashing it upgrade to an official ROM that also upgrades your bootloader.
NOTE: You have to make sure that your device is CID-unlocked before flashing a custom ROM. If you don't know how, look here...
After these steps you shouldn't have a problem upgrading to the latest molski.biz ROM.
Oh, and the extended_rom is, in the case of molskis rom, already included in the download. As it is in almost every ROM available, so you really don't have to worry about that...
Good luck and give us a shout if you run in to any problems not answered in the above mentioned thread
_Nomad_ said:
Well... I'd suggest that you use this ROM to downgrade with. You should be aware that this ROM also downgrades the ipl/spl so make sure that after flashing it upgrade to an official ROM that also upgrades your bootloader.
NOTE: You have to make sure that your device is CID-unlocked before flashing a custom ROM. If you don't know how, look here...
After these steps you shouldn't have a problem upgrading to the latest molski.biz ROM.
Oh, and the extended_rom is, in the case of molskis rom, already included in the download. As it is in almost every ROM available, so you really don't have to worry about that...
Good luck and give us a shout if you run in to any problems not answered in the above mentioned thread
Click to expand...
Click to collapse
I had my CID unlocked using lokiwiz. Very happy - first time everything just went as described in the thread....!
However I wasn't able to use __RUU_Wizard_1050412_WWE_101_11210_WWE.exe - It gives me an Error 300 again. (My Wizard is newly hard-resetted so I guess I don't mind hard-resetting it again if needed)
I really need all the expert out there to help me on flashing my CHT9110. I'm not sure if flashing CHT9110 is the same as flashing P3600i?
Anyway there is an instruction post by ajajaj and credit to Olipro for the great help. I follow every step stated by ajajaj but still I couldn't get my phone flash to WM6.1, therefore I'm pleading for help here.
Step 1 - Anyway First of all, load the Hard SPL to your phone from : http://forum.xda-developers.com/showthread.php?t=398742
Click to expand...
Click to collapse
From my understanding I need to download the Hard SPL, but what does it mean by load the Hard SPL to your phone? Does it mean I unzip the hard spl and double click ROMUpdateUtility.exe on my PC? I tried to double click anyway and my phone boot to tri-color mode, there my phone get disconnected, doesn't matter I press power, camera button, and push the reset button and my phone start in tri color, again I run the ROMUpdateUtility.exe and this time it run and finish 100% but after that it return an Error[270] Image corrupted.
Then I ignore this first step and proceed to following steps
Step 2 - So, what I did was to download RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite extract into its own folder (Mary seems to work as well)
Click to expand...
Click to collapse
Yes I downloaded
Step 3 - then download the custom ruu updated from here: http://forum.xda-developers.com/showthread.php?t=295113 - also get the rombaker for trinity as found further down in the post.
Click to expand...
Click to collapse
Also downloaded
Step 4 - unzip the custom_ruu stuff, put in the downloaded trinity rombaker to replace extracted rombaker,
Click to expand...
Click to collapse
I unzip the rombaker and custom ruu. I overwrite the rombaker into custom ruu/workshop folder
Step 4a - Copy ruu_signed.nbh file that is found in folder created in Step 2 to the rombaker/workshop folder created in step 4
Click to expand...
Click to collapse
I copy the ruu_signed.nbh from WWE_ASIA folder to custom ruu/workshop
Step 5 - then use nbhextract (created in step 4) to extract the ruu_signed.nbh file that is now in the workshop folder
Step 6 - watch the output. (for file names)
Click to expand...
Click to collapse
I extract it and get 00_OS.nb as output
Step 7 - Run the rombaker program and load the extracted files into their places (as referred to in step 6), then click generate NBH
It will ask you to save a file. call it new_nbh (or whatever you want) -
Click to expand...
Click to collapse
I run the rombaker and I fill IPL, SPL, OS, ExtROM, GSM, SubSplash, MainSplash with 00_OS.nb and name the file called new_nbh. So I get new_nbh.txt as the output.
Step 8 - open this file (created in step 7) in notepad, and change the number 400 (about 5 lines down) to 401 save and exit
Click to expand...
Click to collapse
I open with text editor and change the last line to 401 from 400 as below
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_OS.nb
200,00_OS.nb
600,00_OS.nb
601,00_OS.nb
900,00_OS.nb
300,00_OS.nb
401,00_OS.nb
Step 9 - then open a dos/cmd/command.com window (whatever you want to call it), cd to the rombaker/workshop folder and then run the following:
nbhgen new_nbh.txt
NOTE: new_nbh.txt should be the same as the filename created in step 7
Click to expand...
Click to collapse
I did exactly been instructed here
copy the generated RUU_signed.nbh file back to the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder.
Your p3600i rom is now ready for flashing
Click to expand...
Click to collapse
I copy the ruu_signed.nbh from workshop folder back to RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder and run the ROMUpdateUtility.exe
After all the next next thingy, it turn black and doesn't go into the tri color. Tried to push power, camera, and reset button and boot in tri color, run the ROMUpdateUtility.exe again it stop at 1%
Can anyone tell me where I went wrong?
Thank and appreciate all your help.
wssoo said:
I really need all the expert out there to help me on flashing my CHT9110. I'm not sure if flashing CHT9110 is the same as flashing P3600i?
Anyway there is an instruction post by ajajaj and credit to Olipro for the great help. I follow every step stated by ajajaj but still I couldn't get my phone flash to WM6.1, therefore I'm pleading for help here.
From my understanding I need to download the Hard SPL, but what does it mean by load the Hard SPL to your phone? Does it mean I unzip the hard spl and double click ROMUpdateUtility.exe on my PC? I tried to double click anyway and my phone boot to tri-color mode, there my phone get disconnected, doesn't matter I press power, camera button, and push the reset button and my phone start in tri color, again I run the ROMUpdateUtility.exe and this time it run and finish 100% but after that it return an Error[270] Image corrupted.
Then I ignore this first step and proceed to following steps
Yes I downloaded
Also downloaded
I unzip the rombaker and custom ruu. I overwrite the rombaker into custom ruu/workshop folder
I copy the ruu_signed.nbh from WWE_ASIA folder to custom ruu/workshop
I extract it and get 00_OS.nb as output
I run the rombaker and I fill IPL, SPL, OS, ExtROM, GSM, SubSplash, MainSplash with 00_OS.nb and name the file called new_nbh. So I get new_nbh.txt as the output.
I open with text editor and change the last line to 401 from 400 as below
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_OS.nb
200,00_OS.nb
600,00_OS.nb
601,00_OS.nb
900,00_OS.nb
300,00_OS.nb
401,00_OS.nb
I did exactly been instructed here
I copy the ruu_signed.nbh from workshop folder back to RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite folder and run the ROMUpdateUtility.exe
After all the next next thingy, it turn black and doesn't go into the tri color. Tried to push power, camera, and reset button and boot in tri color, run the ROMUpdateUtility.exe again it stop at 1%
Can anyone tell me where I went wrong?
Thank and appreciate all your help.
Click to expand...
Click to collapse
First up you are way ahead of me in getting to the stage where you have been able to modify the nbh, well done.
I am not sure this ROM works even after being modified, but you can give it a go.
To flash the modified ROM.....first put your phone into bootloader mode...ie camer..power and soft reset. It should come up with the tri-colour screen and show SPL Olipro 3.2. something. If it doesnt show Olipro then the Hard SPL you did earlier didn't work.
If it does...connect back to your PC via the USB cable and then run ROMupdate. It will then go through and flash the phone.
All the others have said this ROM flashes and then hangs at the boot screen.
Good luck...let us know how you go.
don't use that ROM... it doesn't work
go HERE to see the ROMs that have been tested and work with the P3600i
there's only 2 (tested) ones there, but at least they work
if those ROMs don't work, i don't know what will - i've tested both myself and they work fine
like andych said, make sure your bootloader (3 colour screen) says Olipro 3.2 on it, to make sure you have HardSPL... otherwise you haven't put that on yet - if you haven't do it again, then flash with a ROM from the link i gave
If I run the ROMupdate when I'm in WM it show
TRIN100
IPL-1.00
TRIN100
SPL-olipro 3.20
But if I boot into the bootloader mode, and I see
TRIN100
IPL-1.00
TRIN100
SPL-3.03.0000
am really confused on how to go about it
joncgde2 said:
don't use that ROM... it doesn't work
go HERE to see the ROMs that have been tested and work with the P3600i
there's only 2 (tested) ones there, but at least they work
if those ROMs don't work, i don't know what will - i've tested both myself and they work fine
like andych said, make sure your bootloader (3 colour screen) says Olipro 3.2 on it, to make sure you have HardSPL... otherwise you haven't put that on yet - if you haven't do it again, then flash with a ROM from the link i gave
Click to expand...
Click to collapse
I just wanna be sure, with the 2 given ROM, I need not do any changing of 400 to 401, and etc? Just run the ROMupdate and everything will run smoothly?
OK
You need to run Hard SPL again.
Connect to your PC and make sure activesync has run properly and your phone is on.
Open Hard SPL and run the ROMupdate. Your phone will go to tricolour and it will come up with a communication error.
disconnect from PC but leave the phone in tricolour....DO NOT reset it.
Cancel our of the ROMupdate. connect the phone to the pc again and run ROMupdate again.
This time it will go all the way through and you will have HardSPL on your phone.
Check it by entering bootloader and it should show Olipro 3.2.
You can then flash away....make sure you always put the phone into bootloader before flashing.
Let us know how you go.
Ok once I get communication error, I disconnect from PC, cancel the ROMUpdate, then I reconnect to my PC again.
This time do I run the Hard SPL or the rom from ajajaj?
I tried both it however reset my phone to tri color and I dont see olipro 3.2 anymore
wssoo said:
Ok once I get communication error, I disconnect from PC, cancel the ROMUpdate, then I reconnect to my PC again.
This time do I run the Hard SPL or the rom from ajajaj?
I tried both it however reset my phone to tri color and I dont see olipro 3.2 anymore
Click to expand...
Click to collapse
You need to run the ROMupdate from HardSPL again......
Only when you have Olipro 3.2 on the bootloader can you run the ajajaj ROM.
Guess it is really giving me a big headache.
Here is my scenario
My phone is on, I connect to activesync and run harl spl romupdate
My phone boot into tri color mode with SPL-3.10.olipro
Then I get error ERROR[260]: Connection
I exit
Disconnect phone from PC
Now comes the part that seems like only I'm the one facing problem.
I connect my phone back to my pc. My phone still in tri color mode I still see SPL-3.10.Olipro
Now I run the romupdate for hard spl again
I see the loading bar but I'm stuck at 0%, then my phone restart and reboot in tri color, now I see SPL-3.03.0000
Alright fine, I reboot on my phone connect to pc run hard spl romupdate till I get Connection error. Now I close romupdate and disconnect from PC.
I reconnect and run the ROM Mary instead. Again failed.
Did I miss any step? Or those are for P3600i and not CHT9110? Any different?
wssoo said:
Now comes the part that seems like only I'm the one facing problem.
I connect my phone back to my pc. My phone still in tri color mode I still see SPL-3.10.Olipro
Now I run the romupdate for hard spl again
I see the loading bar but I'm stuck at 0%, then my phone restart and reboot in tri color, now I see SPL-3.03.0000
Click to expand...
Click to collapse
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
joncgde2 said:
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
Click to expand...
Click to collapse
acutally i want to ask after successfully update the hardspl
what number will show?
3.10 or 3.20
mine is 3.20
so strange, but i still can flash to mary rom
joncgde2 said:
That's odd. I did what you did - I tried the first time, it failed with the 260 error. I kept the phone in bootloader, disconnected it from the PC, exited and restarted the HardSPL flashing program, and put my phone back in WITH the bootloader still on after that error the came up.
This second time, it worked for me.
If what I have just described does not occur with you, then you cannot flash any ROMs. You MUST succeed with HardSPL first. I don't know what is going wrong for you, I'm sorry Are you using Vista? I only tried on XP.
Also! Watch the screen of your phone the first time you try it from activesync, and make sure security dialogues come up and you approve them. I had to allow them ro proceed.
Click to expand...
Click to collapse
Well I've tried. The only way for me to accomplish 100% on bootloader is when my phone show SPL-3.02.0000, if I run hard spl romupdate at this point of time, it will complete 100% but sadly after that, it return
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
wssoo said:
Well I've tried. The only way for me to accomplish 100% on bootloader is when my phone show SPL-3.02.0000, if I run hard spl romupdate at this point of time, it will complete 100% but sadly after that, it return
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
**Am using Windows XP SP2
i'm sorry, you seem to have a big problem with your phone :/
i don't think we can help you any further - hardspl to get into bootloader the first time, you get the error, you run the program again with the phone in bootloader and the hardspl should complete.
then you can soft reset and it should have 3.20 olipro on the 3-colour screen.
if this doesn't work for you, maybe it won't work at all
wssoo said:
ERROR[270]: Update Error
The image file is corrupted. Please check your Update Utility
Click to expand...
Click to collapse
Which Ruu Update utility did U use? 3.1.3.2 or 3.14.4.1? If you use the one that came with hard-SPL, try using the 3.14.4. U can get this here http://forum.xda-developers.com/showthread.php?t=321182 extract this then change the RUU_signed.nbh with the hard-SPL one, then flash your device as described above.
Argyle0297 said:
Which Ruu Update utility did U use? 3.1.3.2 or 3.14.4.1? If you use the one that came with hard-SPL, try using the 3.14.4. U can get this here http://forum.xda-developers.com/showthread.php?t=321182 extract this then change the RUU_signed.nbh with the hard-SPL one, then flash your device as described above.
Click to expand...
Click to collapse
I'm using the default ruu_signed.nbh that come along with Hard SPL. Unsure what version it is. Anyway I downloaded RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite.rar from the net too? Is this you are talking about? I overwrite the ruu_signed.nbh to Olipro's Hard SPL ruu_signed.nbh?
wssoo said:
I'm using the default ruu_signed.nbh that come along with Hard SPL. Unsure what version it is. Anyway I downloaded RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite.rar from the net too? Is this you are talking about? I overwrite the ruu_signed.nbh to Olipro's Hard SPL ruu_signed.nbh?
Click to expand...
Click to collapse
Download the RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe then right click to extract (winrar installed). You should see a some files in the directory you extracted to. Find the RUU_signed.nbh, DELETE IT. Then copy the RUU_signed.nbh from the Hard-SPL to the above directory. Run the ROMUpdateUtility.exe.
Sadly I've tried Argyle0297 still getting the same old error msg.
I think it is lock on the SPL or SuperCID is it?
I know how frustrating it is .... this happened to me too.
BUT the one i got is not CHT9110, it's HTC P3600i with chinese rom installed (originally SPL-3.03.xxx). Maybe there's a difference between the two devices. Anyway if you want to give it another try, download the file below. It's the one i successfully used to flash the HardSPL.
Good Luck.
Argyle0297 said:
I know how frustrating it is .... this happened to me too.
BUT the one i got is not CHT9110, it's HTC P3600i with chinese rom installed (originally SPL-3.03.xxx). Maybe there's a difference between the two devices. Anyway if you want to give it another try, download the file below. It's the one i successfully used to flash the HardSPL.
Good Luck.
Click to expand...
Click to collapse
Thank.. am downloading it and will try it right away after work..
Crossing my finger..
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
You can restore original SPL and rom without having to get into phone with cabs.
As long as you can enter bootloader screen you can restore stock SPL.
I came across this "step for step" process via a search. I have not tried it yet (and hopefully never have to -
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package (ie the original SPL).
2. also download the original hardspl from the attachments in this post. (I presume you already have this?)
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing. (You can probably skip this step)
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000.
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
As I said, I have not tried this. If this does not work, search on this site or Google for additional info. Hope it helps.
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
longnguyen30 said:
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
Click to expand...
Click to collapse
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
ClydeB1 said:
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
Click to expand...
Click to collapse
note that; if you restore stock SPL 114 or 115 please download the same rom version for flashing.
ex: when you restore SPL 114 you must have ship Rom:http://rs68l32.rapidshare.com/files....479.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
because the different SPL & Rom version will make wrong screen.
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
mcowly said:
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
Click to expand...
Click to collapse
firstly you must Hard SPL 1.56 Olinex
secondly flashing your rom
And restore with SPL 1.13 I assume?
mcowly said:
And restore with SPL 1.13 I assume?
Click to expand...
Click to collapse
The process of restoring stock rom/SPL is only to be used if you plan to return device. If you are wanting to keep you you mentioned earlier then you would need to put either USPL or HSPL on your device first. I would recommend USPL for you as it would be easier to return to stock SPL afterwards.
Once you have rom on your device, DO NOT restore stock SPL afterwards. You only restore this if you plan to return your device. If you did you would have to go through whole process of putting USPL or HSPL onto your device again to flash another rom.
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
mcowly said:
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
Click to expand...
Click to collapse
No probs. Out of curiosity what screen problems do you have? Are they Hardware problems or is it something else which could possibly be fixed through the assistance of xda users
It's the phone of my brother, he tells me that the screen doesn't respond anymore, so he can't get past the calibration!
I'll give an update when HTC fixed this (or replaced it )
Thanks for all the help!
I'm doing this right now. I had been using Dutty's V6 before. I never updated the radio, so Ishouldn't have to change it, right?
Anyway, I flashed the stock RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe rom, and that went fine. I'm trying to flash the stock 1.13 spl, and I get error 202: connection. It thinks it can't see my phone, even though it does the initial connection, and even sees what version (1.56) of the spl is on there. Any ideas?
Ok, I did this: I put the phone into bootloader manually by pressing up when it boots up to get to the tricolor screen. That let me run the 1.13 spl pdate, and it said it completed successfully. However, when it boots ups, it still shows D:1.56 olinex or whatever. Did it not work?
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
scythe000 said:
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
Click to expand...
Click to collapse
If your SPL says 1.13.0000 then you are fine to send phone in for service.
R1.13.25.24 - Radio Version
G52.62.25.34u - Protocol Version
D1.56.00.00 - ROM Version
All queries answered
Hi Guys,
I've got the HTC currentyl configured with a custom ROM. Lately it has been giving me trouble in sending/receiving text messages, not receiving incoming calls, not downloading weather data automatially etc.
I did try installing a couple of different ROM's and had the same problem. So I thought I will go back to the original stock ROM and OS and see if I still have the problem and then get HTC support to look into it.
Now, the thing is, I dunno how to find the Stock OS. I found several threads with regards to going back to the stock ROM... but no one seems to talk abt the OS. I had windows 6.1 installed along with Manilla 2.1 on the phone originally.
Pls help me....
From this thread. It is basically the reverse of flashing. ie Flash rom and radio (normally in one package) and then flash to stock spl.
How to reflash Stock/Shipped SPL - STEP BY STEP
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!! (You can find stock roms here)
1. download your choice of a stock spl package from this post. (currently either 1.13, 1.14, 1.15, 1.54 - depending on the rom used)
2. also download the original hardspl from the attachments in the above linked post.
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing.
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000 or any other version ending in .0000, but not ending in OliNex!
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
Click to expand...
Click to collapse
Please post further queries in relevant thread. Link already provided by ClydeB1 above
Thread closed