RDP Won't connect - Tilt, TyTN II, MDA Vario III General

I recently upgraded my Tilt with a Kaiser ROM found from this site. Everything is working flawlessly except RDP. Internet and all other data connections work fine on the phone.
When I try RDP however the status changes to "Connecting" and never connects or gives any error messages just stays at "connecting". Left it running overnight and in the morning it was still "connecting". Our firewall and Windows Server 2003 computer are configured correctly to accept remote RDP connections. In fact we use this remote RDP connection from Windows XP/Windows 7 computers several times a week. I have verified the windows mobile phone is using port 3389. Its Finster869 WM6_RDP. I'm stumped. Has anyone seen this before? Thanks in advance.

Try it on a diff computer on a diff network.

Different Network
I have tried connecting the PDA phone to a different wireless network than the default AT&T MediaNet (HSDPA) with the same results. By different computer do you mean different PDA phone? I know that I have connected successfully with this phone in the past when it was at windows mobile 3.1.

lol @ windows mobile 3.1
i believe you mean windows mobile 6.1
anyway, that cab from Finster869 seems to be the correct one FOR WINMO 6.1
however, you should mention which ROM you have currently because, after all, the problem started AFTER you changed the ROM, isn't that so?
if you are now running a windows mobile 6.5 or windows mobile 6.5.x ROM, there is a thread about a newer cab of remote desktop that works correctly on windows mobile 6.5/6.5.x...search for it!
if you come up short in the next 24 hours, i will see if i can find the thread or pull up the cab from my storage card and attach it to my next reply in this thread. lets hope search gives you better and earlier results, because search is your friend.
good luck!

lol yeah I meant windows mobile 6.1 not 3.1
The ROM I loaded is TPC_V11_Kaiser_Loaded.rar. It has windows mobile 6.5.
The only newer cab of remote desktop thread I could find linked me to a german website that when clicked our firewall blocks Conficker.gen (Worm) blocked.
Couldn't find the cab. Do you have one?
Thanks!

try this one:
http://forum.xda-developers.com/showpost.php?p=3592033&postcount=264

Hmmm that one gets me further but I get a pop up saying "cannot connect with current connection settings. To change your connectings, tap settings". My existing connection is AT&T Media Net cellular line (GPRS, 3G) connecting to access point name wap.cingular. The problem may lie with this cellular connection although I don't see an option to configure it otherwise. Anyway thank you for the new client.

try connecting to another computer on another network.

I got it to work. Didn't do anything except try again. Thank you!

Related

Some apps won't use data connection?

I tried posting this in the WM6 forum last week but didn't get any replies... so, sorry for the cross-post.
I'm having a problem with several applications, and I'm not sure if its problem with how they were written, or if the problem is in my WM6.
I leave my phone connected to my computer all day long. When I first started doing this, I quickly realized that it was using my computer's internet connection via ActiveSync instead of my phone's data connection. I didn't want this, and I found the option to tell ActiveSync "This computer is connected to my Work Network". After that, Pocket IE and IM+ (the two apps I use the most) started using my data connection and everything was good.
Then I started getting more apps, for example, TCPMP and Palringo. When I am connected to my computer via ActiveSync, these apps still try to use that connection instead of my data plan. The big problem here is that my work's firewall blocks things like IM and streaming media, so these apps don't work at all.
If I disconnect from ActiveSync and start up TCPMP and Palringo first, then they work just fine. It seems to stick with the phone's data connection once its established.
So, is this a problem where those programs are picking the wrong network adapter? Or is this some issue from running WM6 on my MDA? Maybe even something that's been fixed in a more recent WM6 rom?
Any help would be greatly appreciated! I have:
T-Mobile MDA
WM6 (InGeNeTiCs_15342_by_mfrazzz)
IPL/SPL 3.08

Tilt 'HTC USB Modem' driver needed (for Windows XP)

Hi
I am missing the original CD that shipped with my AT&T Tilt Package. Would anyone be kind enough to upload the USB Modem drivers available on the CD please.
I have read the Wiki and I have looked over the forums for it, all I could find were the Vista Drivers for the same, but not the XP divers.
Thanks for looking.
do you have the latest version of Microsoft Activesync installed? If not, you should download it from Microsoft.com and it should be ready to sync.
I do not need ActiveSync
Hi
I already have ActiveSync 4.5 installed. HTC USB Modem drivers are different, they allow the kaiser to act as a dial-up modem that we can connect to a laptop computer.
Although we can use the 'Internet sharing option' in Kaiser for the same purpose, I just wanted to experiment with this alternative.
I am sure the drivers are available on the AT&T CD, I just need someone to upload it here.
IntShrUI
Hey, I have a Tilt too. I was messing around using the Tilt as a modem. I have the drivers, but I couldn't get the Tilt to dial right. I found on this forum a program called IntShrUI. It is in the Windows folder of your Tilt. Just run it and follow the onscreen instructions. You don't have to dial anything. Just plug the Tilt into your computer, click connect on the Tilt, and the internet is up. I can give you more info, I am looking for the thread. I can upload the drivers when I get home too if you want to go that route.
Thanks
Your method of connection is good, but I do not have a data plan. I guess it works if you have a data plan or something.
What I am doing is, I am making a voice call over the GSM network to a free dial-up number. The speeds are VERY slow, about 7-8kbps, but it does work.
Oh and if the number we dial isn't free, then we will be charged for the duration of the voice call. I know its low tech, but its free for me and it actually works.
Thanks for replying.
Sorry, I misunderstood. I used to do that too. Just making a data call to my ISP to get the internet. I will attach the drivers from my AT&T CD. The folder is labeled Vista, but I am pretty sure these are what I used and that they work with XP. I will test it when I figure out where my dumb USB cable went.
Thanks again
Thank you for the drivers jeff. After tinkering a lot with the WModem application, I believe that the HTC Kaiser cannot be used as a conventional dial up modem.
The only way to overcome this problem is to use 'Internet sharing' in Kaiser and specify a connection there itself. The only disadvantage here is, we cannot use the dial up services like NetZero that require us to use their custom dialers.
If anyone has a solution to this, please make a suggestion.
Has anyone tried the Vista 32bit driver on XP? Does it work?
Vista drivers do work
Yes, the Vista drivers work under xp. The kaiser is unrecognized as 'HTC USB modem'. However, as I pointed out earlier, the Kaiser does not behave like a conventional dial up modem. Only if you have GPRS, 3G etc. you can use this method.
I'm in the same boat. I couldn't get those drivers to load.
It's unreal that you can't find USB drivers for this phone anywhere on the Internet for XP.
internet
explorer82 said:
Your method of connection is good, but I do not have a data plan. I guess it works if you have a data plan or something.
What I am doing is, I am making a voice call over the GSM network to a free dial-up number. The speeds are VERY slow, about 7-8kbps, but it does work.
Oh and if the number we dial isn't free, then we will be charged for the duration of the voice call. I know its low tech, but its free for me and it actually works.
Thanks for replying.
Click to expand...
Click to collapse
i don't mean to criticize or anything, but you have a $400 phone, unlimited internet for the phone is like $20, why not just do that? or do pda unlimited for $50 and you get unlimited sms too, i just don't get shelling out a full paycheck for a phone and not the extra few bucks to optimize it
BenBoosted said:
I'm in the same boat. I couldn't get those drivers to load.
It's unreal that you can't find USB drivers for this phone anywhere on the Internet for XP.
Click to expand...
Click to collapse
I had no problem getting these drivers to work on Vista and XP. All you need to do is launch Internet Sharing while your phone is connected to the PC, and when the driver prompt comes up, point Windows to the folder where you stored the drivers.
Under Windows XP SP3, I do not even get prompted for drivers, everything loads automatically.
XP 8925(tilt) ICS usb driver
I'm trying to get my 8925(tilt) connected for ICS on my girlfriends' parents' computer running XP sp 1 via usb.
It tries installing a 'generic IRNDS' (something like that), but doesnt work. I couldn't find a working driver, even when I extracted the vista drivers to a folder and tried setting it as the driver for the 8925 in the device manager. All to no avail.
Does anyone know where I can find the XP driver for whatever usb device it would be consider for ICS?
i've got all the tethering plan yadda yadda, I just need it to work, the phone is faster w/ 3g than thier ... !dial-up!!!
Needless to say we watch a lot of Jurrasic Park on VHS in full Dolby Stereo at that household. ha, no really, i need some help with this. please holla back.
@explorer82: go to Start > Settings > Connections tab > Connections > Add a new modem connection.
Select "Cellular Line" as a modem, input the number, user, pass etc.
Than connect to your computer and activate ICS on your Tilt. This should do it.
@rubicant1982: as mentioned in the 2nd post, you need to install Activesync (free download from Microsoft) to be able to connect to Windows XP.
At&t tilt drivers for xp
Hello veryone!
I've lost my CD included in the AT&T TILT which includes the drivers.
I've search the web in order to find this driver compatible with my Windows XP computer, but unfortunatelly no one has up-loaded this program.
If any one has it, we will appreciate if you share it with us.
Regards,
Why it is not posible do download this driver ?
not working on xp sp3,need good working drivers for xp,anybody
all you need is active sync.
Thanks Buddy that worked - finally. phew
/S/

using tytn II as modem in vista

Hi!
I'm having trouble using my tytn II as a modem in windows vista. I had no problems in windows xp but since i installed windows vista and use internet sharing application this is what happens:
I get connected and a new networkadapter (NDIS) is detected
I recieve a local ip-adress of 169.xxx...
This is making me crazy and i've searched the forum without beeing able to find anyone with the same problem...what am i doing wrong??
Any help will be greatly appreciated!
Thank you!
I understand, you use it with USB cable, may be using it with Bluetooth will be better, because in this case Windows will recognize it as a modem.
Please provide some more information about how did you make the configuration.
Did you make it as it was described in the user guide?
Hi!
I did make the configuration exactly as the manual describes it and my device is syncing correctly and everything. It even installs as a network driver when i use the internet sharing application. But it just wont give me an ip-address...
I've had this issue for over a month now and it feels like vista is blocking the service or something, but i just cant figure it out...
PLEASE advise!
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
No problems!
Hi guys.
Ive used this feature with vista with no problems at all..
Just turned internet sharing on and it connected to the network connection then vista aked me what kind of network it was (Home, Work Place etc) and hey presto it worked.
Mine is a T-Mobile Vario iii btw.
Never really had a problem either though it's much too slow compared to a "real" USB-3G/HDSPA-modem. (I max out at 1.2-1.8 mbit/s but when I use my dedicated modem I easilly reach 4 mbit/s)
megaman said:
I have the same Problem as you !
As a matter of fact, I have an ip but vista says that I'm connected to local network but not to the Internet.
But at the same time I have an illimited data plan that runs perfectly when using Pocket ie...
Still searching for a solution...
But i'm sure it comes from vista...
megaman
Click to expand...
Click to collapse
Yeah this is killing me! I get the same as you, i get a IP-address but its a local one 169.xxx.xxx.xxx and vista says its a local ip-address...
I've started looking for services that may be stopped and such in Vista, but i still cant get it to work
I also can't get it to work, so if my WiFi goes out and i need internet, i just reboot to XP... Obviously not a solution, it's very annoying. I'd love to figure this out. I think my friend said he got it working, i should get details from him!
-Taylor
Guys, this is not the solution, BUT, until someone finds it, this is a awesome way to get around the problem! Just install the application, start it and tap connect. Now on your computer you'll find a new adhoc network using wifi, connect to it and your ready to go!
http://www.jongma.org/WMWifiRouter/

Activesync error 80072f7d

I am using Activesync 4.5.0 (Build 5096) on my WinXP laptop to sync the AT&T Tilt with my laptop and outlook exchange. I have no problem with Activesync over the cellular network or wifi, but when I connect the USB and it automatically launches Activesync on the laptop, I see this error on the PC side. Looks like it is able to sync everything except the Outlook data. I looked for this error code on Microsoft site, but I don't see much details about this error code. I have installed additional SSL certificates to see if that resolves the issue, but it didn't. I have had this issue from Day-1.
It is not an issue as long as I am in USA where I have cellular data service to get the emails/appointments/contacts into my phone over the cellular network. However, when I travel, I don't plan to pay for the exhorbitant roaming charges and so would like to use the USB link to sync the info.
Has anyone else faced this problem? Is there a solution?
I heard they had wifi overseas, too. Supposedly its not that exhorbitant, and possibly more convenient than keeping a laptop with you at all times to sync your PIM stuff.
I do carry a travel router with me everywhere with my laptop while on travel to create an instant wifi access point. However, if I am sitting in one of our offices and have a LAN connection to my laptop, I don't see why I can't get my USB connection to work. I am sure there are others who need to sync up Outlook while the phone is connected to the laptop for charging purpose.
Saw this on a site, might want to check it out:
http://devnote.stokemaster.com/2008/02/activesync-45-supportcode-85020006-and.html
" Support Code:80072f7d
Fixes:
Note that this involves registry changes so be careful with it.
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services]
"AllowLSP"=dword:00000000
This site has the registry file that you can double click and modify.
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
This disables the Layered Service Provider (LSP) that use the Windows TCP/IP stack. "
Don't know if that will work,but worth a try.
Make sure to export your original reg key first so if it doesn't help you can always change it back.
Alemaker
I tried the registry addition on the phone just now and then rebooted the phone. But, it didn't help. I have seen this discussion on pdaphone forum, but it is not clear whether it should be done on the phone or the PC side. Chris Herrera's site is also not very clear about it. The file has a .reg extension. Does the extension indicate where it should be run? I manually added the parameter on the phone.
hmm,
good question, and searching both my Vista laptop and my Tilt registry, didn't even come up with that key, but it may be making a new key.
If it didn't work on the phone,try the pc, and if it that doesn't help, was worth a shot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
The last suggestion fixed it for me.
The funny part is that this is a problem only on my work laptop. At home I have no issues.
Thanks
worked for me too
...but it didn't work with dutty's...using RynCpprV6 at the moment.
I think it is something to do with my work PC..
Just want to chime in and say this fixed the activesync error 80072f7d for me too!
(added HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows CE Services\"AllowLSP"=dword:00000000, didn't reboot, and File/Connection Settings within ActiveSync changed from "Auto" to "The Internet")
Another thumbs up. Works a treat. Didn't even need to reboot.
This is a two part problem.....
The first thing you need to do is add the reg entry to your PC not your Tilt. You can download and run the reg entry from
http://www.pocketpcfaq.com/faqs/activesync/LSPvalue.reg
or you can add the line to your reg using regedit.....
The second part is changing the connection settings within ActiveSync....
- Go to File/Connection Settings within ActiveSync...
- Go to the drop down box that reads "This Computer Connects to:" and change that from "Auto" to "The Internet"
Those two items fixed my errors......
Good luck....
Click to expand...
Click to collapse
Worked like a charm - thank you, kind sir!
Thank You!
Another fine service provided by the xda-developers forum! Problem solved!
Ditto!
Another fine service provided by the xda-developers forum! Problem solved!
Just wanted to chime in and say that this worked on my Rhodium too! Thanks Kaiser users!
Activesync error 80072F7D on Toshiba TG01 comes up when try to sync Toshiba TG01 with company's Exchange server
Solution;
Start>>Settings>>Connections>>USB to PC>>Uncheck box: "Enable advanced network functionality".
Sync'd up fine right after.

webcamera plus 2.0

Hi xda'ers. I'm really hoping someone out there can help me. I've got an AT&T tilt. I purchased some software called webcamera plus by Ateksoft. It doesn't seem to work though. It won't connect the ppc to the pc through active-sync...although it should. my tilt just keeps trying to connect to a certain IP address. On my pc, it shows the software as waiting for a connection. I never get past that point. Would anyone have any ideas? Thanks in advance!!!!!!!!!!!!!!!!!!
2 things to check would b that the phone is set for advanced network functionality and also the same setting on pc's activesync. If not test ip address with ie? on pc to check for responce.
Also make sure you have the port settings right, and port forwarding may be needed (most likely will be). I'm using it and it works great.
um, try this:
if you're using it with wlm for example, start the webcam on the phone, and the annoying lil box will come up and it will look for an ip address, THEN send your webcam on wlm, nothing will happen...so cancel the webcam on the phone, (just press the action button to make the annoying lil box go away)....then try starting the webcam again, from your phone. it should then immediately find the ip address. it's really gay software!
hope this helps.
I'm having a similar issue, and the fix above didn't work. I've got "Auto-detect IP Address" unchecked, put in my laptop's network IP (192.168.2.6), forwarded port 2047 to 192.168.2.6 on my router...still nothing. It just endlessly tries to connect and the attempts counter just keeps ticking up, meanwhile my computer still says "Waiting for connection...". Am I doing something wrong here? Even if I check "Auto-detect IP Address", it does the same thing except it says "IP: 169.254.2.2" instead of "IP: 192.168.2.6" in the window. Do I need some kind of firewall setting or something? This has me stumped.
EDIT: I changed it so port 2047 forwards to 192.168.2.7 (my phone's LAN IP) and disabled my firewall. Still no dice.
I bought the app last tuesday and after a few tries I deleted it......it's buggy as hell.,,,waste of money.
tfdeere said:
Hi xda'ers. I'm really hoping someone out there can help me. I've got an AT&T tilt. I purchased some software called webcamera plus by Ateksoft. It doesn't seem to work though. It won't connect the ppc to the pc through active-sync...although it should. my tilt just keeps trying to connect to a certain IP address. On my pc, it shows the software as waiting for a connection. I never get past that point. Would anyone have any ideas? Thanks in advance!!!!!!!!!!!!!!!!!!
Click to expand...
Click to collapse
First, ensure you've installed the desktop software correctly. It loads the video device driver so Webcamera Plus will show up as an available video device in capture programs. Also I'm assuming here that you've properly installed the latest application on your phone. If you haven't go to the Ateksoft website and get the latest version.
Next verify that you have a working Activesync connection between your PC and phone. Some have indicated it's necessary to disable advanced network capabilites in the "USB to PC" control panel (under Start > Settings > Connections). You're mileage may vary, and seems dependant the ROM. I'm running the Faria WM 6.1 and I don't even see this option and the program still works fine on my system. Now connect your Kaiser to your PC.
Now launch your video capture program, or chat program that uses a webcam, or whatever you'd like to use Webcamera Plus with. You should be able to choose your video source, and if you've installed the Webcamera Plus desktop software correctly you should see it as an available video source. Choose it.
Finally, start the Webcamera Plus application on your Kaiser. Go to Menu > Settings > Network. Check the box to "Autodetect IP". If you're going to use Activesync instead of a TCP/IP connection then this must be checked. Click "Done", and then "Start". You should be connected!
If not then check the firewall settings on your PC. Maybe reinitialize the capture device in whatever program you're using on your PC to view the Webcamera Plus image / video stream. Good luck!
kmorris89 said:
I'm having a similar issue, and the fix above didn't work. I've got "Auto-detect IP Address" unchecked, put in my laptop's network IP (192.168.2.6), forwarded port 2047 to 192.168.2.6 on my router...still nothing. It just endlessly tries to connect and the attempts counter just keeps ticking up, meanwhile my computer still says "Waiting for connection...". Am I doing something wrong here? Even if I check "Auto-detect IP Address", it does the same thing except it says "IP: 169.254.2.2" instead of "IP: 192.168.2.6" in the window. Do I need some kind of firewall setting or something? This has me stumped.
EDIT: I changed it so port 2047 forwards to 192.168.2.7 (my phone's LAN IP) and disabled my firewall. Still no dice.
Click to expand...
Click to collapse
Your Kaiser is connected to your LAN via Wifi also, yes? In other words, both your laptop and your Kaiser are on the same network. If so, then you were on the right track setting up port forwarding to your laptop's IP address. If you have the right laptop IP address set in the Webcamera Plus software (on the phone), and the same port specified as you setup in your router, then it should work. If it doesn't then you may have a software firewall blocking your connection.
If you're phone is NOT connected to your LAN via Wifi then you're using the wrong IP address (192.168.2.6). You need to use your WAN IP, not your LAN IP, in the phone's Webcamera Plus network settings. If that doesn't work, and you're sure your router settings are correct, then you should probably take a close look at your firewall logs. Or try disabling it altogether for test purposes.
I ended up getting a different program which worked better, but the FPS was pretty crappy either way and the camera cut out every few seconds. Looking at actual webcam alternatives now instead of being cheap Thanks for your replies though, I appreciate it.
is this software freeware?
hi is the software webcamera v2.0 freeware or does it expire after a set amount of usage and then you have to pay? thanks
hi is the software webcamera v2.0 freeware or does it expire after a set amount of usage and then you have to pay? thanks
Click to expand...
Click to collapse
It expires after a few minutes you have to pay for the full version
I have Touch2 and Qtek 8310 (and Windows 7 32bit). I've install webcamera v2.1 and the problem is that it works with Qtek but not with htc touch2. Same settings on both phones but only with qtek i get image on skype and msn. Any ideas??? (qtek has WM 6.1 and touch WM 6.5)
web cam
where do u get this software from and can i use it on my handsets MSN? (tytn ii)

Categories

Resources