I got the nokia BH-104 with my HD2. But even if I turn all volumes up to max, it's too soft.
The other party can't hear me properly, I can hear them. It's fine if I use the HD2 builtin mic.
Anyone have the same issue or know a fix?
sry , my BH-200 works very fine...
never had problems =(
did you tryed to improove the Bluetooth quality, by useing HD2Tweak ? or SKtools tweaks?
(there you can improove the bluetooth quality / connection abit)
I have SKtools but not sure where the Bluetooth tweaks are?
My touch pro has the "auto volume control" setting on it... I had the same issue but turned it off and everything was good again.
Not sure if it really has anything to do with your problem but you might give it a try.
I can't see an "auto volume control"
where is it?
Related
done it - all working fine wonderful......
but right hand side buttons not functioning i.e. play, stop, skip....
any ideas?????
8)
Got working too but treble spikes
I got my Qtek 2020i to work with the HT820 headset both with calls and music but with the music the treble spikes.it can be a lil anoying especially with a song that uses drummer playing on the metal disc(not sure wat it called) I tried a mp3 192kbps and still u can hear it. any suggestions. I downloaded a cab file to get the music working is there any other cab or file i could try?
So, is there an update to this? i.e. Play / Skip Buttons?
I seem to have the same problem and wondered if anyone has sorted it yet?
Cheers
Just use TCPMP(www.corecodec.com, www.tcpmp.org) player and turn on Broadcom Button support in adv. options.
I am using my headphones with full button support.
Just use TCPMP(www.corecodec.com, www.tcpmp.org) player and turn on Broadcom Button support in adv. options.
I am using my headphones with full button support.
Cool Installed it works like a dream mose of the time,
But do get some drops where the Audio descdides to stop going throught he HT820 and through the normall speakers?
Simply incerase file cache from Automatic to 2048Kb and your system will be much faster. Also, it will solve problem with incorrect sound routing(bluetooth sound transfer occupies anout 40% of cpu time sometimes, including MP3 decodning).
Sorry dumb question but where do I find that setting?
I can see Options > Settings > Select Page > Buffering > Normal BUffer Size is set to 2400KB already?
Cheers
Ok an Update now, I had 0.72 RC 1 installed so thought I'd go back a version to 0.71.
THe same settings are there and changed, Now if I get a call, answer with left button, put down with left button the audio gateway goes. the right hand side still works but no audio to the headphones, only way is to disconnect bluetooth connection and reconnect.
Very Strange. I wonder if we will ever get this to work as it should lol,
Re: Got working too but treble spikes
Robert6 said:
I got my Qtek 2020i to work with the HT820 headset both with calls and music but with the music the treble spikes.it can be a lil anoying especially with a song that uses drummer playing on the metal disc(not sure wat it called) I tried a mp3 192kbps and still u can hear it. any suggestions. I downloaded a cab file to get the music working is there any other cab or file i could try?
Click to expand...
Click to collapse
If you mean spikes as in distortion in the sound, that's most probably because your sound level is too high. Turn down the volume of your headset, and it'll sound fine. I experience this problem if I turn my headset up too high, it's a design flaw (in my humble opinion) of many bluetooth headset devices, but unfortunately it's quite common.
This is in regaurds to the a2dp settings. Curiuos to know what combo people have found to have the best and loudest sound by setting bit pool, joint stero, etc. Also, please list what headset you have. (i have s9's) thanks
anybody?????????
Jabbra B620s, LevelOne BLH-1200, Philips SHB7100
all working just OK
i meant like the bitpool and settings like that.
I've been using sony dr-bt10cx's with the default bluetooth/bitpool settings, and have been getting great results. i've used kaiser tweak to bump the settings in the past, but i didn't notice much improvement.
I'm using the SonyEricsson MBR-100. I've been streaming audio to a home audio system and car radio for the last couple of months. It works fine right out of the box, my Kaiser is stock when it coms to ROM and A2DP settings. Don't even have the HTC bluetooth fix installed.
Just as the title states... ie: I get an sms or email alert and the vibe just keeps on going until I goto volume silence then I can reactivate the volume.
I use ring and vibrate together for all alerts.
Anyone else have feed back with this or a similar problem?
*edit*
So I have done some testing and would like if someone else who uses a bluetooth headset to listen to music could try using BT a few times turning it off and on (when on use the htc media player) and see if after receiving a text message or email if your audio fires properly and your vibe stops. I have not used the BT all day today and the vibe/ring has performed perfectly. Basically after using BT a soft reset is in order.
What apps are you using?
Are you using any of the phone profile software such as SPB Phone Suite, Phone Weaver, Phone Alarm or the like? I had this issue occur when using Phone Suite and it was resolved when i de-installed the software.
I had same problem. I got mail and the vibration didn't stop. I don't use any profile manager. But I had same problem with Cruise with Wm6.1.
No profile managers at all. I have had this happen once before with an asus p527.
I have since done a hard reset on my diamond, we'll see how it goes. I did the reset because initially I've done alot of playing around testing apps and hacks to see what works best, I have re installed the apps I know work and have done. very little tweaking... Fingers crossed.
@thebiker
Do you use Bluetooth Audio for music or voice calls?
I think I have narrowed the problem down to this for myself.
I use my jabra 320 to listen to music on my way to work, after disconnecting the problems begin, vibrate doesn't want to stop and the ring doesn't want to work. A quick soft reset and everything appears to be good until I use my BT Headset again. Are you able to see a similar trend as I am? As I mentioned already I had this issue with my Asus so maybe there is a problem in general with Microsoft's BT Stack when using it with a2dp and in general derails audio on the system. My thinking is the audio is actually what is stopping on me so the Vib doesn't have the audio to tell it when to stop.
Thoughts on this matter anyone?
Bump... added some info to the first post and modified topic slightly, to more acurately describe my newer findings.
If someone using BT can try what is in the first post... thank you.
I have the Jabra BT620s headset and have the same problem. I can listen music and when a call comes in I can answer it and people hear me.
When I disconnect the headset i don't get any sound. Need to do a soft reset to get sound back on my phone. So no rings or sounds untill a soft reset is performed.
Stupid bluetooth... Anyone with a fix?
I can't find anyway other then soft reset. If you look at the volume after disconnecting a headset it sets the volume to 0.
I also have this issue on a tilt running winmo 6.1 and Microsoft BT Stack. So I believe it is a MS Operating/BT Stack issue.
What rom are u guys using? i'll try to have a look and experiment with the 1.37 rom
Shipped ROM: 1.34.831.1 WWE
Date: 5/25/08
WM6.1 CE OS 5.2.19588 (Build 19588.1.1.4)
Radio: 0.93.25.NS16
Protocol version: 52.24.25.08H
any news on this ?
I encounter this problem when receiving voice calls. No sound and neverending vibrate. Also, on several occasions the sound disappeared during the conversation. Only a soft reset could bring it back. The volume showed just good values, so it wasn't a spontanious mute.
I don't use a BT headset, never did. In fact BT isn't enabled at all. I did change the ringtype to ring and vibrate, perhaps thats the trigger. I changed back to default ringtone setting, lets see what happens.
I hope this will be solved quickly, it makes my Diamond a bit unusable as a phone...
rondol1 said:
I encounter this problem when receiving voice calls. No sound and neverending vibrate. Also, on several occasions the sound disappeared during the conversation. Only a soft reset could bring it back. The volume showed just good values, so it wasn't a spontanious mute.
I don't use a BT headset, never did. In fact BT isn't enabled at all. I did change the ringtype to ring and vibrate, perhaps thats the trigger. I changed back to default ringtone setting, lets see what happens.
I hope this will be solved quickly, it makes my Diamond a bit unusable as a phone...
Click to expand...
Click to collapse
Interesting results... I can so far state that so long as I reset after using BT Headset I don't experience this problem. There maybe more pointing to a bad audio driver in general that BT causes to crash immediately and potentially regular use like you have may also cause it to go loopy, might be a specific app and the way it interfaces with the audio api.
citats said:
Interesting results... I can so far state that so long as I reset after using BT Headset I don't experience this problem. There maybe more pointing to a bad audio driver in general that BT causes to crash immediately and potentially regular use like you have may also cause it to go loopy, might be a specific app and the way it interfaces with the audio api.
Click to expand...
Click to collapse
The only app I installed afterward is TomTom Nav6. But I remember the problem happend before installing this app as well. I made several hard resets but no change. Perhaps I try once more, don't change any setting and keep it clean for some days.
The same problem here with ROM ITA.
rondol1 said:
The only app I installed afterward is TomTom Nav6. But I remember the problem happend before installing this app as well. I made several hard resets but no change. Perhaps I try once more, don't change any setting and keep it clean for some days.
Click to expand...
Click to collapse
let us now what the result is..... maybe it is tomtom ?
xivius said:
let us now what the result is..... maybe it is tomtom ?
Click to expand...
Click to collapse
Nop - got the problem before installing any additional software.
I confirm that I also have the problem after using my BT stereo headset.
SR solves the problem ... until I use my BT headset again
UPDATE: UNRESOLVED on 1.37 stock rom, but i can hear people's voices on the line, but doesnt wake up on sms and no alert, and no call ring tone after using A2DP for 5 mins and switching off Bluetooth, using HTC Player in Touch FLo 3D
Baronic said:
UPDATE: UNRESOLVED on 1.37 stock rom, but i can hear people's voices on the line, but doesnt wake up on sms and no alert, and no call ring tone after using A2DP for 5 mins and switching off Bluetooth, using HTC Player in Touch FLo 3D
Click to expand...
Click to collapse
So you have no ringtone anymore ? And after a soft reset ?
no ringtone no sms tone, soft reset, press volume key, resolves it.
This is my first, and only a minor, contribution to the forum; I've been a feeder up till now.
I bought a cheap bluetooth headset for my HD2 for use with my motorcycle satnav and also my HD2 - not that I want to take calls whilst I'm riding, but playing music would be a possibility. It was similar to this:
http://cgi.ebay.co.uk/Bluetooth-V2-...e_Phones_Bluetooth_Acc_ET?hash=item3efab16de4
I paired it with my satnav and could hear voice commands and music as expected. I then paired it with my HD2 and could only get calls, no music playing!!!
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
There were three devices paired (HD2, satnav and my car) so next I had to work out which one. I found that if you look at the nickname for each one, it's decoded into english by the Reg Editor (I use CERegistryEditor). Using trial and error I found that changing the setting "Hideconnections" from "0" to "1" did the trick. I can now hear music through the headset!!!
Well chuffed with myself!!!
PS Perform a soft reset after changing it to lock it in otherwise it resets to "0" after a disconnect.
OOPS! because I was looking for Bluetooth stuff I posted this in the wrong area, sorry!!! Maybe a moderator can correct please?
How bizarre it works by default for me......well done on the find though
Thanks...
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
All I can suggest is that - like I did - compare settings with something that does work. Maybe because you have a mono headset (mine is stereo) it's not capable of receiving music?
Hi
I could play music and receive system sound in my Jabra mono bluetooth earpiece if, in HD2, I go bluetooth->advance->Audio and check "play system sounds on remote hands-free device". However, after a phone call, the music and sound will be routed back to the phone speaker, though the earpiece is still connected (you can still make/receive phone calls through the earpiece).
The music and sound can only be routed to the earpiece again after a soft reset.
The other observation is that, if there is pause in between music or sound for a period of about 12 to 15 seconds, the HD2 will "suspend" the bluetooth transmission (beep in the earpiece) and resuming the music will cause the bluetooth transmission to be re-established (beep sound in earpiece). This is causing skipping of the first 1 to 2 second of the music / sound.
Have installed BTaudio V1.0. It is working on my HD2 and will keep the transmission constant and no skipping problem.
However, also needing soft reset after phone call.
Does any one has similar experience ? Is this earpiece/ head set related of is this HD2 related issue ?
No one has simialr experience ? Is there a thread on bluetooth related registry tweaks, I have been searching for it but don't seems to be able to find one. Any help will be appreciated.
anzudragon said:
It doesnt work for me, im using samsung mono bluetooth. I've tried many methods like btaudio bttoggle.... any help, thanks
Click to expand...
Click to collapse
+1 as well
I have a Samsung WEP420 mono bluetooth and no success either.
Armes said:
I tried looking for settings on the HD2 but nothing made any difference so I decided to look in the registry. After a while exploring I eventually found:
HKLM/software/widcomm/BTconfig/devices/
Click to expand...
Click to collapse
I don't have that reg key at all! I have a dutch hd2 running stock 1.66. When I try to connect to a parrot party bluetooth stereo box this (most of the time) doesn't work. Once or twice I established a working connection but after trying multiple times with no luck I decided to find a fix for my problem. Now I try to edit my reg with this and it's not there!?
i paired the hd2 with the car kit parrot ck3100... leaving apart that it doesn't connect always... although i have checked in settings to play all phone sounds through BT it doesn't...
i think it's a BT problem of the hd2, or maybe all WM phones... 'cause ițve had issues like this before...
P.S. once it played the music thorugh the car kit... just like this...
I have a Sennheiser cc520 headset connected to my HD2. ROM version is 1.66 SVE, but thats probably besides the point here.
Whenever I recieve a call I want the screen to go dark automatically, just like with the prox-sensor. This seems impossible with the headset connected while it works perfectly when its disconnected.
Right now I use XDAShutdown to run the "Lights out"-mode
Is there a profile for a wired headset stored anywhere in the registry or in some weird Manila-file? Does anyone know or have a better solution to my problem?