Related
i guess im the first and last magician. i was trying to flash 1.3 version rom, and mine was 2.16.001, ruu said u cant downgrade ur phone ), but i couldnt stop, i got myself a custom ruu from risidoro thread. flashing went fine, my spl downgraded to 1.3, ipl stays the same (or otherwise) , and was trying to flash latest molski one, ruu start to show percentage bar, but phone didnt start bootloader or whatever u call this screen divided with 3 color where was ipl/spl versions shown. and nothing can make him even blink its display.... just dead black )) not soft reset, hard reset not even bootloader combination (cmaera button pressed + soft reset).
any suggestions?
__s said:
i guess im the first and last magician. i was trying to flash 1.3 version rom, and mine was 2.16.001, ruu said u cant downgrade ur phone ), but i couldnt stop, i got myself a custom ruu from risidoro thread. flashing went fine, my spl downgraded to 1.3, ipl stays the same (or otherwise) , and was trying to flash latest molski one, ruu start to show percentage bar, but phone didnt start bootloader or whatever u call this screen divided with 3 color where was ipl/spl versions shown. and nothing can make him even blink its display.... just dead black )) not soft reset, hard reset not even bootloader combination (cmaera button pressed + soft reset).
any suggestions?
Click to expand...
Click to collapse
CMD KEY VOICE KEY RESET
didnt hepled, actualy i tried every combination with reset button, dead piece of junk.
It said you can't downgrade "but i couldn't stop" and now your phone is trash and you want a suggestion? Ok, throw it out (duh) and get a nokia 6010. When you trash that one you'll only be out $30. I can't imagine what else you'd expect as a reply.
Send it to ME! Then get yourself a Nokia.
JB
i brought a dead body to PDA repair service, they said they can reflash it using hardware flasher, if this wont help they will replace whole flash. for me difference is the price. but sure they can reflash it but say we've replace ur flashROM, so give us a bunch of $.
Are they said what is the price?
To all,
I had the 1.14 spl olinex and installed the new 1.56.00.00 release of original italian rom.
I had the green screen as everyone knows, so I installed again the spl from original htc (not the unsigned).
Than my phone always starts with the bootloader and doesn't go on. Giving upgrade rom error.
Please help me!!!!!!!!!!
Pietrona said:
To all,
I had the 1.14 spl olinex and installed the new 1.56.00.00 release of original italian rom.
I had the green screen as everyone knows, so I installed again the spl from original htc (not the unsigned).
Than my phone always starts with the bootloader and doesn't go on. Giving upgrade rom error.
Please help me!!!!!!!!!!
Click to expand...
Click to collapse
Flash your stock ROM via the bootloader.
upgrade your rom using BLACIMG.nbh <-- stock ROM.
make sure you choose a MicroSD that you know it works for sure (like sandisk).
that's no brick yet.
copy your ROM file and rename to BLACIMG.nbh and save it in the root directory of your storage card. Plug it in to the phone again and hold VolDn + press Power button to start the flashing process.
If it's really bricked you wouldn't even able to see the SPL splash screen...
THANKS
Dear all,
great persons......you are.
Thanks for answers, but after 3 hours getting crazy I downloaded the original rom and everything goes right............
Thanks all
hehe you wana sell that brick?
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
You can restore original SPL and rom without having to get into phone with cabs.
As long as you can enter bootloader screen you can restore stock SPL.
I came across this "step for step" process via a search. I have not tried it yet (and hopefully never have to -
How to reflash Stock/Shipped SPL - STEP BY STEP - FOR WARRANTY REASONS ONLY!
0. be sure to first restore stock OS, and stock radio. stock SPL is always to be done last!!
1. download your choice of a stock spl package (ie the original SPL).
2. also download the original hardspl from the attachments in this post. (I presume you already have this?)
3. run the hardspl exe but do not click anything in RUU yet. just let the hardspl EXE extract the files for flashing. (You can probably skip this step)
4. the SPL you want to revert to is a .NBH file, put the stock SPL NBH in the extracted hardspl package, overwriting the original NBH file in it!
5. continue with the RUU (or if needed, run SSPL-Manual.exe manually, then run RUU when it goes to tricolour 1.07.OliNex screen), it goes to 100%, reboots, done.
+6. to verify, enter bootloader mode, see version number on tricolour screen, should now just say 1.14.0000.
that's it.
+7. no worries: if your device is stuck in bootloader mode with Hard-SPL and you need warranty service, you can still flash stock SPL.
As I said, I have not tried this. If this does not work, search on this site or Google for additional info. Hope it helps.
mcowly said:
Hi there,
My brother also has an HD and off course I put a nice custom ROM on it
However, the screen is dead since yesterday.
I already put the original dutch ROM on it, but it shows a nasty green windows screen. I can't get any further beyond allign screen...
My question: when he sends his HD to HTC, they will probably won't fix it, because they can see it's HSPL (?).
So anybody knows how to restore to complete original, without getting into the phone with cabs? I put HSPL on it, the phone is 6 months old.
Any help would really be appreciated!!!!
Thx a lot
Click to expand...
Click to collapse
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
longnguyen30 said:
follow to:http://forum.xda-developers.com/showthread.php?t=431217
then download ship rom to flash your HD.
Click to expand...
Click to collapse
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
ClydeB1 said:
Thanks for linking to the post, I just added the steps
The OP however says that they have already flashed back to the stock ROM, but that the colours are screwy. This needs the stock SPL restored as well in order to recover normal functioning (or at least so that they can send in for repairs without voiding the warranty).
Click to expand...
Click to collapse
note that; if you restore stock SPL 114 or 115 please download the same rom version for flashing.
ex: when you restore SPL 114 you must have ship Rom:http://rs68l32.rapidshare.com/files....479.3_Radio_52.49a.25.26_1.09.25.14_Ship.exe
because the different SPL & Rom version will make wrong screen.
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
mcowly said:
wow, thank you very much for the quick and usefull replies!
I installed this ROM:
http://rapidshare.com/files/2189268...6.404.1_Radio_52.62.25.34_1.13.25.24_Ship.exe
So after this I have to install original SPL? Can you guys see which one?
Thanks in advance!
Click to expand...
Click to collapse
firstly you must Hard SPL 1.56 Olinex
secondly flashing your rom
And restore with SPL 1.13 I assume?
mcowly said:
And restore with SPL 1.13 I assume?
Click to expand...
Click to collapse
The process of restoring stock rom/SPL is only to be used if you plan to return device. If you are wanting to keep you you mentioned earlier then you would need to put either USPL or HSPL on your device first. I would recommend USPL for you as it would be easier to return to stock SPL afterwards.
Once you have rom on your device, DO NOT restore stock SPL afterwards. You only restore this if you plan to return your device. If you did you would have to go through whole process of putting USPL or HSPL onto your device again to flash another rom.
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
mcowly said:
The phone has to be returned because of screen problems.
I will put SPL 1.13 on it and then flash the earlier mentioned ROM.
Then return to HTC
Click to expand...
Click to collapse
No probs. Out of curiosity what screen problems do you have? Are they Hardware problems or is it something else which could possibly be fixed through the assistance of xda users
It's the phone of my brother, he tells me that the screen doesn't respond anymore, so he can't get past the calibration!
I'll give an update when HTC fixed this (or replaced it )
Thanks for all the help!
I'm doing this right now. I had been using Dutty's V6 before. I never updated the radio, so Ishouldn't have to change it, right?
Anyway, I flashed the stock RUU_BlackStone_HTC_WWE_1.56.405.1_Radio_52.62.25.34_1.13.25.24_Ship.exe rom, and that went fine. I'm trying to flash the stock 1.13 spl, and I get error 202: connection. It thinks it can't see my phone, even though it does the initial connection, and even sees what version (1.56) of the spl is on there. Any ideas?
Ok, I did this: I put the phone into bootloader manually by pressing up when it boots up to get to the tricolor screen. That let me run the 1.13 spl pdate, and it said it completed successfully. However, when it boots ups, it still shows D:1.56 olinex or whatever. Did it not work?
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
scythe000 said:
Ok, acutally I think it did load up. The Bootloader shows SPL-1.13.0000. So why does it show:
R1.13.25.24
G52.62.25.34u
D1.56.00.00
Is this ready to send in for service?
Click to expand...
Click to collapse
If your SPL says 1.13.0000 then you are fine to send phone in for service.
R1.13.25.24 - Radio Version
G52.62.25.34u - Protocol Version
D1.56.00.00 - ROM Version
All queries answered
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
What ROM did you try to flash ?
i had 1.54.00 then i installed HSPLWrapper_Blackstone_156OliNex.zip and after that just gut this green screen and it wont do nothing anymore
can somebody help me I just wanna know how i set back to standard rom or what you call it
the same thing happened to me i think. my hd kept freezing and all colours were blue and green. i installed hspl 1.56.oilnex from a differant location (not from rapidshare or xda-developers) and it all sorted out and i had energy rom hell of a rom
hope this helps.
o. and by the way. when i put on the new hspl i booted the phone it its boot loader and then connected the usb.
this is done by holding the vol dwn button whilst phone is turned off and then also holding power button
cheers
yeah but i cant put anything on the phone it just keeps freezing cant get in activ sync to put on a new spl
I think that happen to me how can i fix it i cant get nothing out of his guide to figur it out
The "negative colors" you are seeing are because you are installing 1.56 based roms on a 1.14 SPL. They are incompatible. You need to update your base SPL to 1.54 before flashing these new 1.56 based roms. This is why your original rom works when you flash it over your 1.14 SPL. You can follow my guide to do this.
Read this:
http://forum.xda-developers.com/showthread.php?t=505377
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
k0pix said:
great did a couple hard resets tried to put the O.g rom on it frozed again cant do nothing now it just stays bei 0%
Click to expand...
Click to collapse
Read cRaCKwHoRe's guide, and follow it exactly.
k0pix said:
I think I messed up my HD
everything is green and blue it wont let me do anything i tried to flash i got now spl 1.14 from olinex but i can´t do nothing now it just freezes
can i still fix it or is it broken please help me
Click to expand...
Click to collapse
dude.. either upgrade to a 1.56+ rom or downgrade spl to 1.14
thtll work fine for u..
i had it accidentally already downgraded to 1.14 thats where i got the green and frozed up phone. i tried to upgrade now it wont do nothing every single time i turn on the phone it goes to boot mode and tries to install and just stays still by loading
Has this been resolved? Or do you still require help?
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
k0pix said:
still need big time help
It was my first time and im kinda lost I watched a video from youtube thewidjetkid thougt was pretty easy but messed up my whole phone
Click to expand...
Click to collapse
Ok, from the start
You had SPL 1.54.0000 and then you flashed HSPL 1.56
Was this flash successful? i.e. check your SPL in bootloader. Does it say SPL 1.56.OliNex?
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
k0pix said:
flash workd but i had 1.14 and then the green problem and freezing
this what happend so far
I had spl 1.54 did what crackawhore said to first update the phone with this "HSPLWrapper_Blackstone_156OliNex.zip ". After that I got a green screen and It keeps freezing did a couple hard resets. Then somebody told me to do a rom update from the SD. Went in the bootloader he startet and stayed still by "Loading" and since that everytime i turn on the phone. Tt just starts from there bootloader screen und tries to load but does nothing happens
PS: thanks for taking the time to help me out
Click to expand...
Click to collapse
Ok, I'm a little confused you said you had 1.14, and then said you had 1.54
What does your SPL say right now?
Green problem is usually caused by using wrong HSPL on wrong rom, i.e. HSPL 1.56 is to be used with 1.56+ based roms and HSPL 1.14 is to be used with pre 1.56 based roms
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
right now there isnt a rom on it it just stopped by loading i tried to put back on the standard spl wait let me go see real quick
this one Restore_Stock_SPL_115.zip
k0pix said:
i think i had 1.54 the newest rom what htc had on there site and then tried to put on Blackstone_156
Click to expand...
Click to collapse
ok, so you had SPL 1.54.0000 on device and then tried to put on HSPL 1.56, correct? Was this successful? What does your SPL say now in bootloader?
it said 1.14 what i dont get because i installed HSPLWrapper_Blackstone_156OliNex.zip
this is the way I went checked my spl it was 1.54 downloaded HSPLWrapper_Blackstone_156OliNex.zip installed it and checked to see what spl i had ,had 1.14
sorry for double post how can i delete it :S
..........
Hi,
I just flashed Pdavietv 65.
After 10 minutes of using it, I locked the phone using the WM lock.
When i wanted to unlock it, the screen doesn't respond anymore.
I did a hard reset, I can't type anything on the screen, screen doesn't feel my fingers....
Anyone has an Idea?
I try to flash stock rom right now...
Sorry for my bad english
darkblue68 said:
Hi,
I just flashed Pdavietv 65.
After 10 minutes of using it, I locked the phone using the WM lock.
When i wanted to unlock it, the screen doesn't respond anymore.
I did a hard reset, I can't type anything on the screen, screen doesn't feel my fingers....
Anyone has an Idea?
I try to flash stock rom right now...
Sorry for my bad english
Click to expand...
Click to collapse
Flash another rom from the tri-color screen.
I just flashed the frenck Stock Rom From HTC.
I can't access.
When i 've the screen 'tap the screen to align screen', Nothing happens when i Touch the screen.
Only vol UP and down and power off are working....
Any solution?
Thanks
I think your digitizer unit died..get one one ebay and replace it
try fresh a stock rom which includes SPL as well.
mcdull said:
try fresh a stock rom which includes SPL as well.
Click to expand...
Click to collapse
You have a link please?
darkblue68 said:
You have a link please?
Click to expand...
Click to collapse
Try Putting your Phone in BootLoader mode.
Flash it with HARD SPL1.56
Then Try Installin a Fresh firmware again, a Hard Reset n it will be fixed.
I did all of this...
Nothing, I think I must send it to HTC...
I think your HD died touchscreen . You need to bring the HTC Service Center for repairs. If you is bought on ebay then there will pay for about 200 USD
My Touch HD just died
R.I.P. !
Damn all was working nice.
I did nothing.... Only flashed all days another rom
And when i wanted to call a friend yesterday,the screen didn(t respond anymore....
Grrr, I will send it to HTC this week, and i will by a Topaz One...
Leo is too big for my pocket....
ancola66 said:
I think your HD died touchscreen . You need to bring the HTC Service Center for repairs. If you is bought on ebay then there will pay for about 200 USD
Click to expand...
Click to collapse
DIY for 30 USD..ebay the spare part.
Had one same condition and fixed flashing with an original rom. Radio+Rom and Align screen on startup/\
I was in same condition as yours ,When in typped align scren nothing but after flash and a hard reset everything getback
Me, nothing after flshing original Stock ROM and originalHSPL.
But solething is very strange.
When the backlight power off (the dimmer), it comes back when i hit the screen... But i can't align the screen, the screen doesn't recognise my touch.
Why the dim is working when i hit the screen ans my gesture are not recognised?
Thanks a lot
Greats from France
It looks like only the alignment of the screen is wrong. Why it does not get fixed when flashing original ROM is strange. But the fact that the screen response to touch (returning from dim) should mean that the digitizer is OK.
Yes I think the digitizer is OK.
But I don't know what the problem is.
I will try to reflash tomorrow a custom Rom without align to screen at first boot....
Thanks
try mtty to completely erase ur internal memory..
then flash stock rom..
Ok, a few simple queries to help solve your issue. I'm assuming you used USPL or HSPL before flashing rom? and correct version of HSPL? Can you still access bootloader? What is your SPL?
If you can access bootloader, all is not lost and your device is not bricked.
I'd recommend flashing original stock rom onto your device and starting from fresh. Stock roms can be found in the wiki here. Once you have restored stock rom and if you still want a cooked rom, follow thisguide.
Let me know the answer to the above queries and how you get on.
Hi,
I used the SPL by Olinex.
Now i revert back to the original SPL.
When i enter in booloader mode, I can see: SPL-1.54.0000
Is this ok?
Before flashing the origal SPL i flashed the original French Stock ROM.
What is MMTY ?
Thanks
darkblue68 said:
Hi,
I used the SPL by Olinex.
Now i revert back to the original SPL.
When i enter in booloader mode, I can see: SPL-1.54.0000
Is this ok?
Before flashing the origal SPL i flashed the original French Stock ROM.
What is MMTY ?
Thanks
Click to expand...
Click to collapse
Solution should be found here including MTTY info & instructions. Same method for HD