hello friends
i have a big probleme with my TYTN II , i installed ARABIC LANGUAGE SUPPORTS , but when i restared the machine , i found that :
1 - the phone blocked on black screen .
2 - the phone can not be detected by the computer .
* i used the reboot hard set , but the problem also the same ....
please how to resolve this probleme ?
Try doing a master reset on the phone it will clear any stuff that you done & will have to start over but it will get your phone back to it's original state when you flashed it with a different rom. You can do a master reset by holding down the 2 soft keyes & then use your styles to click on the reset. hope that helps.
hy friend ....i did that before ...but no result ....
Get into bootloader and flash new ROM. But have u do hard-spl before? If u don't do hard-spl before, u have to find exact ROM for ur device.
Moved as not software release.
Follow poster above directions and stock ROMs can be found in sticky. "to which as mentioned you need your carrier ROM"
Related
Hello,
i am having a frustrating problrems with my p3600
- the phone is not working ! it show that there is no singal and i can't get to the phone seetings
- i tried hard reset / soft reset / upgraded to wm6 , no difference
- tried to flash the radio , but it stops at 0% , and after one hour , it is still 0%?
please help!
osamanet said:
Hello,
i am having a frustrating problrems with my p3600
- the phone is not working ! it show that there is no singal and i can't get to the phone seetings
- i tried hard reset / soft reset / upgraded to wm6 , no difference
- tried to flash the radio , but it stops at 0% , and after one hour , it is still 0%?
please help!
Click to expand...
Click to collapse
Please don't start a new thread in every forum about the same thing...
Already answered the question in this post: http://forum.xda-developers.com/showthread.php?t=306869
Did the upgrade and still not working ......
?
SIM CARD?
osamanet said:
Did the upgrade and still not working ......
?
Click to expand...
Click to collapse
Two possible reasons
1. You didnt insert the SIM Card in the right way.
2. The device is broken.
Sounds plausible after a full ROM upgrade including Radio...
But first: will Osamanet make up his mind about where to continue this discussion (he opened another thread in Trinity main)....? It's getting a fragmented discussion like this...
Anyway; another plausible explanation could be a corrupted radio (since he also can't get to the phone's settings). I've read about fixing/reflashing a corrupted radio somewhere here on the forums, but i can't remember where (i believe Pof was the one to reply how to fix that) ....do a search for that and maybe that'll fix things...
If that doesn't help, only thing left is broken hardware and you have to send it in.
hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...
Hi , Im having one problem with my phone... Its turning off and on by itself ...
Im having this problem since I upgrade to Kid_DC Media OS (4.2) . (I dont know and Dont think its a rom problem )
So... what could be the problem , cuz then I upgrade to agent_47 Valkyrie_v1 rom , and I still had the problem .
ps : I ve been changing the rom since I have my xperia , but before I upgrade to kid_DC's rom I didnt have the soft reset problem . Now Im using touch it 9 ... and I STILL have the problem...
In xperia general forum told me to hard reset my device... But Now Ive done it like 10 times in a rode... And the soft reset problem is there!! ...
Hope U can help me !!! Thanks!
Sorry 4 my english..
mca1490 said:
Hi , Im having one problem with my phone... Its turning off and on by itself ...
Im having this problem since I upgrade to Kid_DC Media OS (4.2) . (I dont know and Dont think its a rom problem )
So... what could be the problem , cuz then I upgrade to agent_47 Valkyrie_v1 rom , and I still had the problem .
ps : I ve been changing the rom since I have my xperia , but before I upgrade to kid_DC's rom I didnt have the soft reset problem . Now Im using touch it 9 ... and I STILL have the problem...
In xperia general forum told me to hard reset my device... But Now Ive done it like 10 times in a rode... And the soft reset problem is there!! ...
Hope U can help me !!! Thanks!
Sorry 4 my english..
Click to expand...
Click to collapse
If it's still there then it seems to be a hardware problem and you should give it for repair.
First try to install the stockSPL and a stock ROM, maybe this is causing some problems (I never heard of something like this though).
skycamefalling said:
(I never heard of something like this though).
Click to expand...
Click to collapse
Me neither... OK... I will try that...
I'll keep u updated.
thanks..
skycamefalling said:
If it's still there then it seems to be a hardware problem and you should give it for repair.
First try to install the stockSPL and a stock ROM, maybe this is causing some problems (I never heard of something like this though).
Click to expand...
Click to collapse
DONT!!!!!!!!
1st instal stock rom and then stock SLP.....
if i were in ur plc i would hard spl again after installing stock spl to check if the problem was fixed...if not then go 2 repair
agent_47 said:
DONT!!!!!!!!
1st instal stock rom and then stock SLP.....
if i were in ur plc i would hard spl again after installing stock spl to check if the problem was fixed...if not then go 2 repair
Click to expand...
Click to collapse
Sorry
Well, I had no intention to line up the steps to do in a perfect order.
It just came to my mind that he should try to set the phone back to stock.
But you're absolutely right, I should watch my words because someone could think it's step by step like a cooking recipe
skycamefalling said:
I should watch my words because someone could think it's step by step like a cooking recipe
Click to expand...
Click to collapse
yap...i no what u ment....but someone might mistakenly take it otherwise!!!
lol! , Im not a totally noob , but im not an xpert.. xD .
Well , I installed the stock rom first (obviously ) , and then the stock hard spl ... .
edit... One minute ago , my phone just got reset... Im very sad and dissapointed...
other suggestion?...
install Hard-SPL again.
do a hard reset not soft reset
install the stock rom again (refer latest R3A rom)
do a hard reset
yptan62 said:
install Hard-SPL again.
do a hard reset not soft reset
install the stock rom again (refer latest R3A rom)
do a hard reset
Click to expand...
Click to collapse
ok ! , I ll try it as soon I get home!...
thanks!
my x1i developed a similar soft-reset cycle after removing panelmanager directory from program files, on every boot phone hanged after about 1-2 minutes and then restarted.
i was on itjes touch-it9 rom and a hard reset solved it. but i think this cant be ur problem as u have already tried reinstalling roms. hope somebody solves the mystery.
ok...........
hmmm... no... hard reset wont fix my problem
sounds like a hardware issue then..
try without sd card in for a while..
try without sim card in for a while.
are you installing anything extra?
if the problems still there then I guess you have to send it back for repair.
I Installed a fresh windows on my diamond , and after that , everything went fine , the only problem is that , when i restart my device(suhtdown the startup again) it acts like a fresh windows install , you know , customazation , tapping the screen , etc , it delets all of the installed progs , and contacts ,just like a new install , and it keeps repeating every time i restart my phone , i need help , pls guys ... im desperete !!!
what ROM did you flash to? Flash another ROM this time using MTTY and doing a hard reset after its flashed the ROM.
i used about 5 diffrent roms , same problem ... dont know what to do ... and i can't find my old rom either , i had windows 6.1 and a manila 2.1 can't find it anymore
I suggest you flash the stock rom then run the unlocker again and then flash the custom rom. Good Luck!
i tought about flashing a stock one , but now , my phone won't even start , it just freezes on the start screen ( it shows the touchDiamond text , and the radio version , windows , etc ) , i tryed using mtty but it won't recognize my phone , and the drivers won't install either , i am using windows 7 ...
Code:
alexu2007 said:
i tought about flashing a stock one , but now , my phone won't even start , it just freezes on the start screen ( it shows the touchDiamond text , and the radio version , windows , etc ) , i tryed using mtty but it won't recognize my phone , and the drivers won't install either , i am using windows 7 ...
Click to expand...
Click to collapse
If you can get it to go into bootloader then you can flash. It should say serial toward the bottom. Then when you connect with your cable it should change to usb. Your ready to flash.
and with what program should i flash it ? i can get into bootloader , it says usb .. but what program should i use to flash s stock rom ?
alexu2007 said:
and with what program should i flash it ? i can get into bootloader , it says usb .. but what program should i use to flash s stock rom ?
Click to expand...
Click to collapse
You need to have your carrier's shipped .exe version for your device downloaded to your pc.
could you explain what should i have , i got my phone from a friend . u know second-hand , i didn't get any cd only a headset and a charger... if so where can i find that .exe ?
edit:i googled it and i found a stock rom .exe like u said , thanx a lot , hope it will work fine now ...thanx a lot again for helping me
alexu2007 said:
could you explain what should i have , i got my phone from a friend . u know second-hand , i didn't get any cd only a headset and a charger... if so where can i find that .exe ?
edit:i googled it and i found a stock rom .exe like u said , thanx a lot , hope it will work fine now ...thanx a lot again for helping me
Click to expand...
Click to collapse
You're Welcome!
I figured you would find it.
Good Luck to you!
hi all .i am not a phone expert, but i flashed my phone several time's with topat , cheetah en more . but now my phone is realy slow , with everything. if i type a message it wil crash , if i want to see a picture it crashes. is there a program wherewithal i can format my whole phone ? and which kitchen can i use for the topat 2.1 rom . i am from holland . dutch plaese. thanks all
jeetje103 said:
hi all .i am not a phone expert, but i flashed my phone several time's with topat , cheetah en more . but now my phone is realy slow , with everything. if i type a message it wil crash , if i want to see a picture it crashes. is there a program wherewithal i can format my whole phone ? and which kitchen can i use for the topat 2.1 rom . i am from holland . dutch plaese. thanks all
Click to expand...
Click to collapse
Do you hard reset after you flash?
You may want to consider MTTY Task 29 before flashing. Info can be found here.
no i didn't . i have done a hard reset . thanks it workd fine .thanks again