Please Help Me Change SEMC-X1 into HTC-Raphael >.< - XPERIA X1 ROM Development

What i know
1. this cant be changed using Registry
2. this cant be changed using any of the Start > System > Device Info
3. i have tried this http: //www.silentservices.de/HexEdit-ROM-for-BBC.html
the thing is , in example they try to change HTC-Rhodium into HTC-Raphael ... well they have the same amount of character, so no problem for them, but in my case, (using the R3A ROM), SEMC-X1 cant be changed to HTC-Raphael without adding more bytes in it (you can try it if you want)
is there any other way?
The Reason for this hassle
1. BB Connect works perfectly for me
2. now i found out Blackberry Application Suite in http: //forum.xda-developers.com/showthread.php?t=626456
well that BAS wont install on my device because it detected "SEMC-X1" as my model id, and it simply wont install
Please help
Thanks a lot

I don't have suggestions, but I am curious, what advantages do you get by using BB Connect of BB Application Suite? Is there any gained functionality over what WM offers by default?

BlackBerryMessenger is one thing
to be connected to all of my friend that used BBM
other then that, i can easily access the push email and internet using BBConnect instead of BAS
but then, when i used BBConnect, i cant use MSN and any other messenger
well , i am hopeful that by using BAS, i can rid of that limitation

Hi M4G1C14N, I'm trying to find out as well, I'll post if my search is fruitful, please share if you find some way to do it as well..
Thanks

M4G1C14N said:
What i know
1. this cant be changed using Registry
2. this cant be changed using any of the Start > System > Device Info
3. i have tried this http: //www.silentservices.de/HexEdit-ROM-for-BBC.html
the thing is , in example they try to change HTC-Rhodium into HTC-Raphael ... well they have the same amount of character, so no problem for them, but in my case, (using the R3A ROM), SEMC-X1 cant be changed to HTC-Raphael without adding more bytes in it (you can try it if you want)
is there any other way?
The Reason for this hassle
1. BB Connect works perfectly for me
2. now i found out Blackberry Application Suite in http: //forum.xda-developers.com/showthread.php?t=626456
well that BAS wont install on my device because it detected "SEMC-X1" as my model id, and it simply wont install
Please help
Thanks a lot
Click to expand...
Click to collapse
Hello,
can you be more concrete? What do you want to do exactly?
Maybe i can help.
Let me know

Shazad.K said:
Hello,
can you be more concrete? What do you want to do exactly?
Maybe i can help.
Let me know
Click to expand...
Click to collapse
Hi Shazad, if you take a look at this thread:
http://forum.xda-developers.com/showthread.php?t=632147
They have managed to extract BlackBerry application suite(Full BB on WinMo), however it only works on HTC-Raphael, the Installation program and the application itself will check before starting for modelId, which in the X1's case is HTC-Kovsky (or in his case SEMC-X1). Regardless of the name, how can this modelId be changed.
In some of the threads they use a utility called SetModelId.exe, however that doesn't work on the X1.
You can check this post as well:
http://forum.xda-developers.com/show...&postcount=117

M4G1C14N said:
BlackBerryMessenger is one thing
to be connected to all of my friend that used BBM
other then that, i can easily access the push email and internet using BBConnect instead of BAS
but then, when i used BBConnect, i cant use MSN and any other messenger
well , i am hopeful that by using BAS, i can rid of that limitation
Click to expand...
Click to collapse
Why could you not use MSN while using BBC? Try to search for Multi APN connection that solve it for me I would love to have full bb on my x1 as well or at least i would love to use BBC on a cooked ROM, thats why i'd like to know the answer for your question as well.
I found something, search for 'hex editor blackberry connect' and hit the 1st link it'll give you. The method described there is way too dificult and time consuming for me :/

Anyone can run the BB app suit in x1 yet?
BBC works great in X1.. I think BAS would working greatly to in it.. we need SetModelId.exe, for Xperia X1

zelduy said:
Anyone can run the BB app suit in x1 yet?
BBC works great in X1.. I think BAS would working greatly to in it.. we need SetModelId.exe, for Xperia X1
Click to expand...
Click to collapse
BTW did you get BBC working on a coocked ROM on x1? (6.5.x etc

BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15

M4G1C14N said:
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
Click to expand...
Click to collapse
you can install BAS in X1??

M4G1C14N said:
BBC is working fine on all coocked ROM
you just need to rename the HTC-Kovsky into SEMC-X1
it is simple, just check the first post for more info
for BB application suite, i can confirm it that it will not work, i have tried it using my BES Email to activate the enterprise service, but it just wont work (i can easily activate my BES Email using BlackBerry Connect though)
Check this out forum.xda-developers.com/showthread.php?t=626456&page=15
Click to expand...
Click to collapse
Of course i've tried that but with no success i gave up when i had on like 10th try of different combinations always HEMC-X1 instead of SEMC-X1 in BBC. Also i found HTC-Kovsky there twice, which one do you usualy changing to get BBC working? 1st one or the 2nd one? From your link i can see that you've change it for HTC-Raphael - that works with BBC? - This might be the solution for my hassle.

HTC-Raphael is needed to install BlackBerry Application Suite which is not working :|
you can install R3A ROM from X1, it already has SEMC-X1
Oh and dont forget to subscribe for BlackBerry Internet Service Data Plan (it wont work without this)

I've been using BIS for long time. what i wanted was to use a rom with htc sence in it but all of them which are available has got HTC-Kovsky as ModelID. It would be great if you can tell me how exactly you change HTC-Kovsky to SEMC-X1 when you say it is easy. On which ofset have you made the changes? Did you change both entries or just a one? Whic one then? I've tried that usong the hex editor but the best i could get was HEMC-X1. Please man if its easy for you then tell me thanx. S.

you can change HTC-Kovsky to HTC-Raphael, then change AKU to .1.6.3
I use this method for 4 months, and it works very well for me over BBC.106

please, me to want to use bbconnect on my customized agent47 rom. Can someone explain step by step how to?

cq0dq said:
you can change HTC-Kovsky to HTC-Raphael, then change AKU to .1.6.3
I use this method for 4 months, and it works very well for me over BBC.106
Click to expand...
Click to collapse
This worked mate. Thanks a lot

M4G1C14N said:
HTC-Raphael is needed to install BlackBerry Application Suite which is not working :|
you can install R3A ROM from X1, it already has SEMC-X1
Oh and dont forget to subscribe for BlackBerry Internet Service Data Plan (it wont work without this)
Click to expand...
Click to collapse
I've done it as above... (changed my model ID from HTC-Kovsky to HTC-Raphael.) ...and Blackberry Connect works, have 'Security died unexpecty' sometimes after reboot, but battery pull sorts this out. I'll try to install BAS when i have a time and let you know how was it...

l0rdsheva said:
please, me to want to use bbconnect on my customized agent47 rom. Can someone explain step by step how to?
Click to expand...
Click to collapse
Check the 1st post of this thread, for BB Connect the ModelID has to be SEMC-X1 (original ROMs) or HTC-Raphael (your custom ROM will have probably HTC-Kovsky as its ModelID so you have to use the HexEditor from the 1st post to change it to HTC-Raphael, i've done it and it works) also don't forget to change the AKU to 1.6.3 when using custom ROMs (i did not have to change it when using original latest ROM and i did not check its version as BBC was working straight away) you can find it in registry (use a registry editor, i use the plugin in Total Commander) HKLM/System/Versions/Aku - just change the value from whatever is there to .1.6.3
When using BBConnect than you'll probably need to use multiple APN connection to be able to use BBC in the same time as other aplications which requires a internet connection (internet, IM, Weather or GPS updating etc..) For this check this one:forum.xda-developers.com/showpost.php?p=2382465&postcount=37

ok, changed device name and now flashing, hope it'll run! thanks in advance!

Related

Trying to Arabize WM2005 on BA

After succesful upgrading to WM2005, I tried to install the 2 arabic files extracted from EXT ROM (which I think are responsible for Arabizing) "Default_AACERT_arabizer.CAB" and "Default_ACERT2_arabizer.CAB". After installation and softresetting, the device acts wierdly, and.... There is NO Possible Way to get it running again without getting into "Bootloader Mode". Did any one manage to do that? and I couldn't get into the xetended ROM of WM2005....did any one succeed?
you cannot use any existing localization packs on WM5
well it workedfor me on himalaya
http://forum.xda-developers.com/viewtopic.php?p=160111#160111
Dear friends,
I tried my self also...but all in vein....that was 1st reason to downgrade to Win2003 SE...
I wrote an email to imaginet one month ago, they replied " we are trying hard to upgrade and soon you will have an upgrade"...I don’t know what it means by soon...months or years???????????....since they never upgrade after 2003... :twisted: :evil:
i will attach 2 options for arabizing... people managed to get them working... i didnt know however (still new at these things) so if are able to enable any of them please tell me how
file 2 (updated arabizer ripped from jasjar) i even tried installing the first then updating with this...
i tried everything
i cant seem to get it to work, while others have and are not willing to show me the way
i cant upload it cause its too big even after partitioning
so i will try from a different place cause i cant use ftp here
mebonkers said:
file 2 (updated arabizer ripped from jasjar) i even tried installing the first then updating with this...
i tried everything
i cant seem to get it to work, while others have and are not willing to show me the way
i cant upload it cause its too big even after partitioning
so i will try from a different place cause i cant use ftp here
Click to expand...
Click to collapse
mebonkers
Check this link. There's a detailed explanation on how to do it. However, some claim that it didn't work for them. Good luck.
http://www.ce4arab.com/vb7/showthread.php?t=41334
did that
still nothing :?
mebonkers said:
did that
still nothing :?
Click to expand...
Click to collapse
Can you explain what is "nothing"? I did it my self last night and it worked. The only drawback is there is no Arabic keyboard. However, they clain that if install that dictionary..it works. I'll have to try it.
Arabizing is possible with wm5 and blue angel
I can arabize my xda iis with the following programs in wm5 (maimach patched rom) if you use the standard rom it locks the blue angel...you must extract this paste the nb file to ph20b if you have xda iis, if u have a siemens it is the other folder..reflash the rom:
imaginet Dictionary working
Imaginet reader working
Arabizer 1.3 working and stable
sidenote:
imaginet handwriting reader working well in 2003se. Works in 2005 however when the mobile goes into standby mode if unused say for 5 minutes pressing the power button will not open the blacklight, only a reset resolves this. In the end this is the only one i have not got working yet.
Finally, make backups every step of way with a program like sunnysoft 3.3 or above, unlike sprite this is compatable with wm5.
Dear friends, I am still trying to install properly arabizer on wm05.
I couldn’t install Arabic –English dictionary and prayer timings.
If you install above mentioned files without AR-Eng dictionary, Arabic key board will not install, but if you get file from following link, named “United Arabic Cab.rar, its worked fine for me and I was able to get Arabic key board without installing ar-eng dictionary. hoping it will be helpfull for you.
http://forum.xda-developers.com/viewtopic.php?t=29156&postdays=0&postorder=asc&start=25

Debranded MDA Compact II ROM, 'Qtek' Style

now obsolete
new aku2 here
http://forum.xda-developers.com/showthread.php?t=279908
so am i right in presuming that the gprs settings and phone settings are present in the rom? if not, how do we find them?
ALSO:
T-Mobile are releasing a rom update this month (ie this coming week!) so it might be worth looking at what they have done, not just for wifi fix but any other maintenence changes. Apparently they do alot of testing on their roms so there might be useful stuff there.
t-mobile gprs and wap settings are part of the extended rom. the 3 cabs files that begin CAB-Customization-...
i didnt include them as i'm on O2. This is more like a 'Qtek' version for the charmer, a universal version. doesnt include any operator specfic content.
looking forward to that update, hopefully its aku2, everyone else is releasing theres at the moment.
SDIO
What about SDIO drivers in this debranded OS?
so if i back up my current rom cabs and then install this, if it all goes pearshaped, i can relaod the origional and not end up with an expensive paperweight?
i wanna do the deed, but am scared as hell with it being my first PPC and only a few weeks old at that.
but anything to speed it up, its like im running windows or something.......
oh!
:wink:
only way you could mess up is if you pull the plug or have a power cut! while uploading the new os. remember to backup all your contacts and stuff as you'll need to hard reset.
you can start all over again if it doesnt boot or something by using the install package on the t-mobile site
http://t-mobile.iris-global.com/download_manager_mda_com2.html
just go into the phones bootloader, with the phone off, hold down camera and plug in the sync cable until the 3 color boot screen comes up and run the install package to go back to factory.
It worked!!
Dear dave106 and all;
i tried your fantastic upgrade yesterday. This was my experience:
1- I works like charm!
2- you might find it easier to use Total commander to uncheck 'system' and 'read-only' in the properties of the windows folder on your charmer, before Unlocking CID (to avoid any error).
3- alternatively you might use Lockiwiz 2b from this forum to unlock and unlock CID first.
4- the ROM upgrade went fine, showed some error messages on the charmer screen (nothing to worry about) but did not indicate an end. I unplugged it after 20 minutes. It rebooted on itself et voila, it was up and running.
5- Changing the boot scrren went very smoothly.
6- I noted that the T-mobile customization (after the new config.txt) did not install at all. I had to manually install the CAB listed in the config.txt file to reload the MMS and GPRS settings.
But now my charmer has no T-mobile crap on it...
However, i did not notice any dramatic change in speed....
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
supreme2k said:
is this howto working on that device ?
http://www.vodafoneshop.de/shop/det...schaeftskunde&I_ID=4000&Artikel_Daten_ID=3208
or can i damage something with your howto over there ?
Click to expand...
Click to collapse
thats a wizard, so you can just cid unlock it and install the imate or qtek wizard roms. the mda compact 2 is unique to t-mobile no other operator has it.
aeh....your sentence sounds strange to me, is it possible for my device or not ?
supreme2k said:
aeh....your sentence sounds strange to me, is it possible for my device or not ?
Click to expand...
Click to collapse
lol, in a word, no.
i am from czech and i dont understand all of this.
This is OK? or only any idea..
is really decustomization my mda compact II? I have tmobile
(i dont can it)
i flashing new rom....
after 10minutes say my mdac "aplication repllog.exe dont start"
...update is OK, and i have second problem
when customization is start it said " \Extended_ROM\CAB-Customization-Connection-TMUK-Charmer-Nov15.sa.CAB"
DOESNT IT, I DONT HAVE THIS FILES IN EXTENDED ROM ++
and third problem, my storage card doesnt work ( i have2gb pretec...
only after the update
dead link
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
funkus said:
Ill check your unbraded rom for wifi sdio capabilities over the next few days (on a 'just in case' basis). I'm just recovering from a totally borked pagefile on my main pc so ive been too busy to try as of yet.
Click to expand...
Click to collapse
Funkus,
did you try wifi sdio with this debranded rom?
tnx
Re: dead link
Dzim said:
Can someone please post a working to the debranded rom? The current link does not work :-(
Thanks,
Dzim
Click to expand...
Click to collapse
try it now, some tit nuked the uploads again
Got the Rom Working, the difference is quite noticable. Re wrote the extended ROM to auto customise just enough to get the MMS and GPRS to work correctly. Did any one work out if a WiFi card SD card will now work?
Would like to know before i buy one!
Re: dead link
dave106 said:
try it now, some tit nuked the uploads again
Click to expand...
Click to collapse
Thanks a lot, I have spent few hours searching the Web for this file, but couldn't find it. Thumb up!!
Dzim
aWizard not reconizing os.nba
Hi,
have followed instructions as above but when I go to write new rom it can't find os.nba.
Anyone have any ideas on what i'm doing wrong or what to do next?
I'm a noob, obviously :roll:

logmein and gotomypc not working

Anyone know why logmein and gotomypc will not work on any cooked rom?
Everything seems to work fine on the stock att and htc rom. However, if I use any other rom (including dutty's) I can't login. It just asks me for my unsername and password and I cannot remote access my computer.
On the stock rom's I get a popup to download a file to make it work. On the cooked roms, the popup never comes and it just cycles back to the login screen.
I have tried it with both opera and PIE but both only work with the stock rom.
I love using other people's rom but this is a must have for me.
Any idea how to fix it?
logmein help
you need the attached file installed before you can use logmein from your pda.
file directly from LogMeIn
apposite said:
you need the attached file installed before you can use logmein from your pda.
file directly from LogMeIn
Click to expand...
Click to collapse
Thank you but does anyone know why PIE does not download the file automatically like it does with the stock rom?
With all these tech savy people, no one knows why?
argoldst said:
Anyone know why logmein and gotomypc will not work on any cooked rom?
Everything seems to work fine on the stock att and htc rom. However, if I use any other rom (including dutty's) I can't login. It just asks me for my unsername and password and I cannot remote access my computer.
On the stock rom's I get a popup to download a file to make it work. On the cooked roms, the popup never comes and it just cycles back to the login screen.
I have tried it with both opera and PIE but both only work with the stock rom.
I love using other people's rom but this is a must have for me.
Any idea how to fix it?
Click to expand...
Click to collapse
even with the cab installed this same thing happens to me. I have to click back and submit 5-50 times and then it will work. I think that it's the logmein website is broke. This only happens when logging in from a PDA.
i gots it 2 work!
i am using
Kaiser/TILT
w/ Duttys DualTouch V3 Final(WM6)
AT&T Service
@ 1st logmein wouldnt work
but i was trying to use it w/ Opera
it only works w/ internet explorer.
people said it does not work w/ WM6
that is false.
TO GET IT TO WORK:
uninstall RACtrlCE.cab if already installed.
clear IE cookies.
soft reset
download the RACtrlCE
on your PC via
the post above.
transfer the cab via
exchange connection.
install cab on your phone.
then soft reset.
go to www.logmein.com
which should automatically redirect
you to https://secure.logmein.com/pda.
log in and u should b in business!
kireol said:
even with the cab installed this same thing happens to me. I have to click back and submit 5-50 times and then it will work. I think that it's the logmein website is broke. This only happens when logging in from a PDA.
Click to expand...
Click to collapse
The Only sure fix is to use Iexplorer and before you start it run disable proxy cab each time and it will work every time.

Any solution for Blackberry connect on wm 6.5?

Before you start jelling use search and google, i did it and find few solutions ( but no for X1) that i have to change registry and result was always the same. I had to flash rom again because screen goes to blackout. So, if any one had will and knowledge to share...
Thanks
use a registry editor and change Aku value the prior to installing the BBC app..
in:
HKEY_LOCAL_MACHINE\System\Versions
make the "Aku"=".1.6.0"
spikegotti said:
use a registry editor and change Aku value the prior to installing the BBC app..
in:
HKEY_LOCAL_MACHINE\System\Versions
make the "Aku"=".1.6.0"
Click to expand...
Click to collapse
yes, i try that, and when i install BBC and restart, phone boots with black screen and no responce at all,i had to flash your ROM again. Later even change ROM version to 1.05.931.10 like it was on R3a because for BBC 4.0 stand
"Where to install: on your phone
Version: 4.0
Notes:
BlackBerry® Connect™ for X1 only works with MR2 software versions.These vesions are named 1.05.xxx.xx.
To check the SW version:
Start -> Settings -> Device Information -> Version
In the items menu, the first item is ROM version. MR2 ROMs follow this convention: 1.05.XXX.XX
To learn more about BlackBerry® Connect™ technology" from http://www.sonyericsson.com/cws/support/softwaredownloads/detailed/blackberryconnect/x1?lc=en&cc=gb
and change aku to .1.6.0. Than i managed to connect for a 5 sec and then disconected. Something is missing there...but thanks
i try this method but couldn't even flash, maybe anyone else maked?
http://www.silentservices.de/HexEdit-ROM-for-BBC.html,
Sapa13 said:
i try this method but couldn't even flash, maybe anyone else maked?
Click to expand...
Click to collapse
Hi, I've tried that, could flash the ROM, it was working but unfortunately the Model id is still incorrect (thats why bbconnect doesnt work) On X1 the right device ID should be SEMC-X1 an on a custom 6.5.5 ROM's etc it is HTC-Kovsky i've tried to flash my X1 like 10 times but the best i could do was HEMC-X1 (even i've put SEMC-X1) in the hex editor. Also I found two entries of HTC-Kovsky in the Hex editor, always edited both of them being not sure of which one I'm suppose to change...
Guys help, i want to have a sexy ROM on my X1 but need to have BBConnect working :/
snooffy said:
Hi, I've tried that, could flash the ROM, it was working but unfortunately the Model id is still incorrect (thats why bbconnect doesnt work) On X1 the right device ID should be SEMC-X1 an on a custom 6.5.5 ROM's etc it is HTC-Kovsky i've tried to flash my X1 like 10 times but the best i could do was HEMC-X1 (even i've put SEMC-X1) in the hex editor. Also I found two entries of HTC-Kovsky in the Hex editor, always edited both of them being not sure of which one I'm suppose to change...
Guys help, i want to have a sexy ROM on my X1 but need to have BBConnect working :/
Click to expand...
Click to collapse
OK guys i've got it.
1. If you are using the original ROM, there should not be a problem (the ModelID is SEMX-X1 already)
2. If you want to use a custom ROM, you will have to change ModelID from HTC-Kovsky to HTC-Raphael on offset 0033A6C0(using the hexeditor from previous post of Sapa13 www.silentservices.de/HexEdit-ROM-for-BBC.html)
3. After you flashed altered ROM to your X1 booted up change AKU (hklm\system\version) to .1.6.0 install BBconnect reboot.
4. enjoy

Help! Chinese Fonts/Reading Chinese characters

Hi there,
I don't know anything about installing fonts or whatever, I have a HTC Touch Diamond 2 with Windows Mobile 6.5 I guess..
But I can't see any chinese characters its all blocks.. can anyones help me or explain me in simple way/steps how to do it or with printscreen or anythings else so I will understand easier..
Thank you!
same problem, using the Energy roms, I USE to use CE STAR, and it worked fine for other 6.5 roms such as Dutty, Tess, but iuno why donest work for energy roms,,, any help??
try this...
There is a chinese font that you can install i have a topaz with windows 6.5 and it works fine, but i don't need it because i have a singapore phone i'll upload it. let me know if it works for you. if all else fails go check out zta4 v 2.8 it is chinese input but it eliminates xt9.
for tianzhi: if you are unsure how to install...sync your phone with your computer. open up "my computer" and select my windows mobile device and find a place that you can easily remember to transfer the cab file. then on your phone go to file explorer and find the place you put the cab and then open the cab file. it will ask you where you want to install, select it then wait a few moments for it to install. after its done soft reset your phone and your chinese characters will not have a problem at least on stock devices or officially upgraded devices through htc. i am not sure about cooked roms.
Woaaah!!! thank youu!!
it works great!! =)
iTianZhi said:
Woaaah!!! thank youu!!
it works great!! =)
Click to expand...
Click to collapse
Glad it worked for you.
itianzhi said:
hi there,
i don't know anything about installing fonts or whatever, i have a htc touch diamond 2 with windows mobile 6.5 i guess..
But i can't see any chinese characters its all blocks.. Can anyones help me or explain me in simple way/steps how to do it or with printscreen or anythings else so i will understand easier..
Thank you!
Click to expand...
Click to collapse
刷中文的系统啊·哈哈哈·看不懂的我话请google翻译·中文是我的母语不想用英文回答
zeta1988 said:
刷中文的系统啊·哈哈哈·看不懂的我话请google翻译·中文是我的母语不想用英文回答
Click to expand...
Click to collapse
那就不要用英文吧, 好像我们都会中文。就不是我的母语!哈哈 其实安装手机输入法更好,但是有时候那个输入法不会自动的安装字。
whtguitarguy said:
There is a chinese font that you can install i have a topaz with windows 6.5 and it works fine, but i don't need it because i have a singapore phone i'll upload it. let me know if it works for you. if all else fails go check out zta4 v 2.8 it is chinese input but it eliminates xt9.
for tianzhi: if you are unsure how to install...sync your phone with your computer. open up "my computer" and select my windows mobile device and find a place that you can easily remember to transfer the cab file. then on your phone go to file explorer and find the place you put the cab and then open the cab file. it will ask you where you want to install, select it then wait a few moments for it to install. after its done soft reset your phone and your chinese characters will not have a problem at least on stock devices or officially upgraded devices through htc. i am not sure about cooked roms.
Click to expand...
Click to collapse
TY soo muchh =]]]
楼主,这个对Energy的Rom适用么?一直想用Energy但是乱码.
能不能回答我一下。还是乱码。
我用的rickymsyh6.0full还加了个chinese_support(No_Font)的程序,现在能凑合着用,乱码出现的情况不多

Categories

Resources