Related
My phone keeps freezing on this green windows mobile screen, and no matter how many times i reset nothing happens. I have to do a hard reset in order to get the phone working again. It happens often whenever i turn the phone off and on or change out the battery. Any idea? I am running the stock ATT rom, without the added junk (after i do i reset and it starts installing the extra apps i soft reset the phone). I installed the stock kaiser htc home plug in and thats about it.
i thinks its time for a new rom.
to keep it simple and basic =
http://www.america.htc.com/support/tilt/software-downloads.html
this happened to me just two days ago. phone froze up and wouldnt start. i had to do a hard reset.
hold both softkeys and use the stylus to reset the phone. (hole at the bottom of phone).
this will do a hard reset.
it sucks that you dont have a sprit back up of all your data. i have several checkpoints of my data. i suggest you do the same if you do decide to hard reset.
grandpareza said:
this happened to me just two days ago. phone froze up and wouldnt start. i had to do a hard reset.
hold both softkeys and use the stylus to reset the phone. (hole at the bottom of phone).
this will do a hard reset.
it sucks that you dont have a sprit back up of all your data. i have several checkpoints of my data. i suggest you do the same if you do decide to hard reset.
Click to expand...
Click to collapse
I do have backups, and it continues to happen. I finally just reinstalled all my apps today without restoring a backup to see if it helps but I doubt it.
Do you have HardSPL or have you changed your radio? Anything like that? Have you previously flashed other roms?
nope stock and stock. I did first notice this when I tried to use the kaiser tweak utility. but i have since never installed it
Did you upgrade from the original 1.57 at&t Rom to the recently released 1.62 at&t Rom?
If so are your restoring a backup from the 1.57 Rom onto the 1.62 Rom. That is a no-no....
Remove your SD card and do a soft reboot. If it still hangs, then it is a ROM issue. If it boots OK then there is a program on your SD card that the device is having problems with, in either linking to or opening.
Copy all the SD card files and programs on your PC. Format the SD card. Start installing the programs one at a time and see which program is the culprit. Remove it and all those that add to the problem.
If you were happy with the original ROM, then do not change to another.
kyphur said:
Did you upgrade from the original 1.57 at&t Rom to the recently released 1.62 at&t Rom?
If so are your restoring a backup from the 1.57 Rom onto the 1.62 Rom. That is a no-no....
Click to expand...
Click to collapse
Hey Kyphur.. good to see you here.. What else can you do to avoid keeping remnants of the previous ROM? How can you avoid restoring a back-up?.
asfoor said:
Hey Kyphur.. good to see you here.. What else can you do to avoid keeping remnants of the previous ROM? How can you avoid restoring a back-up?.
Click to expand...
Click to collapse
That's a loaded question. Personally I have the cab files for all of my programs on my storage card. I've consolidated some useful programs into a single cab and modified most cabs to install into a cleaner start menu structure.
Then I use KaiserTweak to set the few remaining Reg settings that I don't have already set in my cooked Rom.
My today plugins (PocketBreeze, PocketWeather & iLauncher) all have import/export functions so I use that so I don't have to reconfigure them every time.
Finally I have an Exchange Server account for my contacts and e-mails.
Hi, my Tilt can't auto reset for some reason.
Is this normal?
I have to manually press the soft reset button with the stylus every time
Thanks
are you talking about not auto resetting after installation of a cab or auto resetting in general. The tilt is NOT supposed to automatically reset itself out of the blue. It either needs to be program or user triggered.
Hi thesire
I'm talking about when a program tells it to reset. I hafve sprite backup on it and it says that it will reset before backup. The system turns off but doesn't reset. the only way to turn it back on is if you manually hit the reset button.
This is also the case for installing cabs as I will have to poke the reset manually because it doesn't to it itself
What ROM are you using? This happened with the HTC official 3.03.405.0 (Radio 1.64.06.04)
Oh I think Im using that rom
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
What rom should I flash to?
thanks
Same Problem
I have the same problem. I am currently on L26 diamond (Hybrid) v5.
Any Ideas???
So i have been using Custom ROMs for about a year now with no problems. However, recently i flash to the Valkyrie Firestorm 4.4 (i think) leo and when i attempted to restart my fone it would either hang on the sony erricson logo or it would boot up like it does after a flash. As in it would run the customisation and wipe all my contacts and other information, but strangely enough the clock would remain on the correct time.
This has happened with every firestorm i have tried, which are: 4.4 leo, 4.4 manila and the 4.5 leo. I am going to try a different ROM to see if i still get the problem. has anyone had this problem?
I've re-flashed my hard-spl multiple times to no avail.
Yup I've had the same problem with itje's touch it 14 rom. I have no idea why this is happening, it already occured twice with me.
I had the same problem with the valkyrie 4.4 rom, Itje's Toucht-it Leo v10 and Toucht-It Xperience v2, UnOff 6.5. And also with other versions of itje's Touch-it because i remember seeing the HTCpedia.com customization screen a lot
Every time my phone hung and then when i push the reset button it take's a long time and then it is back to first run. or it does nothing and stays at the touch-it start-up screen.
Could it be a hardware failure like something with the backup batery in the phone? when power goes off it doesn't save data and then when you turn it on it thinks it is first run?
I can always tell when it is going to happen if the favourite programs on the programs tab dont work anymore. When I want to start a program from the tab it says "location not found" or something. After that I will likely have a system freeze and after that I have a hard reset, same sympoms as Aerox912.
So maybe it has something to do with the programs tab?
I am having the same issue with Christians 3.201 build.
Also during the installation it will often hang on the install of Opera or Opera Beta.
But I tried re-downloading and reflashing 6 times before I gave up and went back to an older ROM.
Looking forward to the next version so I can try again. I really like the Firestorm but I also really like the Panels.
Now I just need to find out how to install the SPB Mobile Shell 3 as a panel like on Christians and I would probably stay with my SEX1 build.
Using itje's touch it 15 RC2 and it sometimes, for no reason, phone just reboots. It used to happen with version 14 as well. Never used to have that problem before then.
I tried with rotastrains Blaze rom. the latest edition and i am still getting the same issues. I too, can tell when it is going to happen. When the programs can't be run anymore or if the phone freezes and then i need to turn it off, i can almost guarantee that will happen.
Im glad to see im not the only one with the problem, but isn't there anyone with a solution? I've tried everything and i really cant put up with having to wait 15 minutes until my phone is usable everytime it restarts.
Guys, i had this problem with my Diamond recently & i can say that it's more than frustrating.
try this option, I'm not sure if this is the EXACT same process for the Xperia but it did solve my issues. Perhaps scheduling a daily backup of PPCPIMBackup will help keep info up 2 date when the dreaded lockup happens?
hope this helps
flash a stockrom and then the custom rom and the problem should be gone
Why would that help?
I now tried cristians rom, and had the same problem again within one day. I'm now gonna try the MTTY (format) option, see if that helps...
mobilkungen78 said:
flash a stockrom and then the custom rom and the problem should be gone
Click to expand...
Click to collapse
This simple solution seems to work fine for me. Thanks man!
The MTTY solution for formatting the phones ROM area worked just fine for me
Can you point me the mtty formatting method? Please.
I also had this problem once at my x1 and once at my girlfriends diamond. Seems a reflash with a stockrom and after that flash the custom rom again solves this problem.
Atleast it worked for me.
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Drokare said:
I put on the R3AA014 ROM and am still seeing the problems.
Is there another Stock ROM that would work better?
And I have tried to look up the mtty method and all I find are people talking about it, but not the actual method.
Any help would be appreciated.
Click to expand...
Click to collapse
Maybe it isn't a software problem but a hardware problem. Incase no rom fix it.
toontoonizer said:
The MTTY solution for formatting the phones ROM area worked just fine for me
Click to expand...
Click to collapse
Could you please describe the process.
I tried the The DEFINITIVE MTTY Thread but the task 29 command did nothing... Though i'm not sure what should happen.
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
someguyyy said:
For the Xperia, I heard that the command is Task 28 instead of Task 29 for the MTTY process
Click to expand...
Click to collapse
Hm... i tried that but that did nothing.
happened to me many times..most frequent is my X1 will restart itself every half an hr...very frustrating
SOLUTION:
Format Your SD card (don't be lazy and just delete the old stuff and put new rom file in there).....put a fresh copy of the .nbh file in root.
Hard reset after flash.
Problem should be gone
Edit: We now have a whole Q&A Forum...
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Scabes24 said:
Ok theres something I've been wonderin, it might be a toddler question but what are the guidelines for full Backup/Restore from one ROM to another (with same rom/sense build)? (using SPBbackup, RescoBackup, or SKtools)
And when I know I can't do a FULL restore what can I restore? (ex: Dutty r15 23569 --> Nhathoa 23123) prob not registry, but what about sys files?
Or if its just a different version of the same rom.. for example --
-- Full backup Energy Cookie Dinik 23569 (july2) -> Full restore after flashing Energy Sense2.5 standard. (and lets say I skinned a few things and installed apps like cleanRAM, IconChanger, Opera 10.. before the backup) -- Would it work?
Thanks.
Click to expand...
Click to collapse
Basically,the only clean restore would be the same ROM to the same ROM, minus PIM data.
Let's say you're running Dutty HG15 23569 and he releases HG 16 23569 with fixes, whether registry, programs whatever, you would end up restoring over the changes.
With Manila, even if you back up your own ROM and restore, its not a good idea to restore your PIM data back to Manila as its been known to cause it to crash. However PIM backup works well for this.
I'm not saying it 'won't' work, but it 'can' cause issues.
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Use pim backup!!!
you better off using PIM backup and you wont screw it up...Use mortscript to create a script to install the files you need on first boot...(XDA-UC is written in Mortscript.). Just make .reg files, .cabs and what ever else you need , edit XDA-UC to your needs and you are ready to go!
Scabes24 said:
I see.. Thanks!
So when restoring a backup from HG r15 to r16 like u said, besides PIMbackup, would any of these options be safe to restore
-databases
-registry
-system files
-device
-force rom upgrade (im not even exactly sure what this action does, just an option in SPB)
-Also Settings exporter from the same CHT ver.
Thanks for the help!
Click to expand...
Click to collapse
Force upgrade is for different ROM builds. I wouldn't use it.
I use a combination depending on what I am restoring.
For same ROM restoring, I use SPB Backup with PIM disabled, and Google sync (gmail as exchange server) for contacts, e-mail and calendar.
For different ROMs, I only restore Gmail, my exported registries such as my sound settings, owner info, and various other tweaks I apply and databases.
Naturally any program specific settings would be fine.
As far as registries and system files, you could be restoring something that's incompatible or an older version.
Sashimi and User Config are 2 alternatives for auto installing your stuff.
Hope this helps.
Yeah I use XDA_UC with very few configs cuz I'm never sure if certain stuff will restore correctly. I seem to have trouble with settings exporter.
How do I restore specific program configs (bsbtweaks, advanced config, Tabs) without using the UC exporter or a full restore? Can I do it with SPB?
Because I like UC but just for CABs and PIMrestore (sometimes CHTedits)..
Sorry for all the Q's, I've been flashin a lot lately and always end up doin manual config labor and soft reseting a million times. But thanks a lot for the help!
I should note that the reason I don't use the Exporter is because I used it a bit before and when I would import the settings the bottom row of quicklinks would be all mangled and everything seemed glitchy. does this mean I was doing something wrong? I'm not sure but I think I remember NRGZ28 mentioning something in the changelog about an update/fix for UC so maybe I just need to try again.
How can I tell which Hard SPL / Factory SPL I have?
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
snailspeeder said:
Hi All,
I have been reading the forums for a couple of weeks and I really want to flash my AT&T Pure with a new TOPAZ ROM. However, I got a second hand PURE and I don't know if they have done any modifications yet.
How can I tell which version or if they did change the stock SPL? Also, if there was a fail during the upgrade of the SPL would it still show the version and the phone still be functional?
This is what the bootloader screen says:
TOPAZ210 32M
SPL-1.83.0000
MicroP-Topaz (LED) v11
Turbo HW/Turbo SW
Thanks in advance!
Click to expand...
Click to collapse
It should say
SPL-2.51.OliNex or 1.83.OliNex
And it depends on the error you encountered. Did you try the upgrade already?
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
snailspeeder said:
Thanks for looking into this. Well, I tried once to do upgrade (before checking what SPL version I had) and I got everything, but then the screen just showed 0%. I waited for a little bit, but then I just soft reset because it wasn't progressing. It shouldn't take that long, right? From the thread on the Olinex post, it seems like it should be over in a minute or so.
So does this mean I still have the stock spl?
Click to expand...
Click to collapse
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
SPL-1.83.0000 is the stock SPL I'm pretty sure by the way
Scabes24 said:
Possibly, I just upgraded the latest version right when I got the device. I did have a bit of trouble with my upgrade though. Did you follow the steps exactly?
I ended up having to install a cab file (enablerapinew). Then it worked fine.
You can always try removing the battery/SD/SIM for a min or 2, put em back in, establish connection, then follow the steps.
Otherwise you should read the troubleshooting and Q&A.
Click to expand...
Click to collapse
I tried again following their "automatic flash" but then I got the error of the server being down or something. I will try again. I have flashed ROMs on other phones, but this one is giving me a bit of a problem. I also tried the Manual version, but it didn't put the phone in the bootloader mode, it kinda just stood there.
So you followed the directions like they posted? Any other hints or tips? I installed the enablerapinew too.
EDIT:
I figured it out, I am such an idiot. Thanks for your help. After installing the enable I did a soft reset. That was what I did not do. Thanks. Any recommendation on a stable ROM? I am looking at Nhathoa's
Nice, yeah NhatHoa is good. I've been using the Energy ROMs.. close-to-stock and fully loaded versions available.
begin with htc pure rom install
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Check out this thread first, it is the pre-guide to learn the basic:
forum.xda-developers.com/showthread.php?t=585457[/url]
knightto said:
I'm not finding link for how to take an htc pure with AT&T rom and install Tom Topaz Rom. Looking for link for instructions. Right now it has the AT&T rom and I don't know how to take the file and apply it to the phone. The AT&T provided rom is an .exe file.
Click to expand...
Click to collapse
Do you have Hard-SPL already?
Can't get sms dialog to automatically rotate to landscape mode
Hmm, I'm still not sure if this is the right thread to ask a general, non-rom-development topaz question... It says so in the first post, but the thread is located in the rom development section - strange...
Anyway, I'll try: I'm using the latest cookie sense 2.5 energy rom for my diamond2, but the problem existed on all previous (energy) rom versions - whatever I try to add to the touch tools' rotation manager (or g-config), I can't get the sms writing dialog (htc "threaded" or "normal" version) to automatically rotate to landscape mode when I turn my phone. Nothing happens... I have a default hard button assigned for doing that and that works flawlessly. Other apps added to g-config rotate automatically...
I'm desperate, anyone willing to help? Is there some setting I have to enable or some registry tweak to apply or something? I searched the forum but users don't seem to have any problems with that, so I must be doing something wrong...
Thanks!
About the Touch diamond 2 Resitive touch screen problems ^^; , My Lovely diamond 2 if there cold , My diamond 2 automatically Touch in the center .. , Can you help me ?
Hey everybody,
When i want to connect to internet with my kaiser, It crashes.
It Restarts and then if i try it again the same happens.
Im running Basic windows but i used hardspl.
Tnx allready
Grtz Daan
Hard reset?
I Often changed rom..
hardreset doesnt work.
So you do a hard reset, you've changed to another rom, have you tried the factory rom?
What rom are you on right now, what radio are you using?
Just saying I have hardspled doesn't mean much.
well, i tried the factory rom also.
Also doesnt work,just every rom works.I install them and then they work perfect.Like 30 minutes later if i go on internet,it crashes. and if i dont enter my pin nothing is wrong.
Get a new battery, interenet = more drain strain on battery reboot.
Least i'd do that as next step.