Database Develop

UPGRADING PDA2K..CAN BACKUP DATA BE RESTORED?

HI,
I HAVE A PRESENT ROM VERSION: 1.22.00WWE FOR MY PDA2K..
AND AM GOING TO UPGRADE THE WHOLE PHONE WITH 1.40WWE...
I HAVE TAKEN A COMPLETE BACK UP ON MY SD CARD(XBACKUP). MY ONLY DOUBT IS ONCE I DO THE UPGRADE..CAN I RESTORE MY BACKED DATA FROM XBACKUP OR NOT? PLS HELP..IF NOT I HAVE A LONG PROCESS TO GO BY BACKING UP EVERYSINGLE BIT SEPERATELY.
REGARDS

FYI, based on what I have experience with the 1.40.00WWE ROM, if using xBackup, the data can be restored completely, HOWEVER, for some strange reason, the camera will not work. I did this upgrade sometime back and and had to re-install every application I had once the flash was complete just to get the camera to work.

FYI, based on what I have experience with the 1.40.00WWE ROM, if using xBackup, the data can be restored completely, HOWEVER, for some strange reason, the camera will not work. I did this upgrade sometime back and and had to re-install every application I had once the flash was complete just to get the camera to work.

Same experience
I had the exact same experience with my PDA2K. Everything restores and works great, except the camera. It gives an error when you start it. Since I never use the camera, I just left it as-is so I have no camera.

Restoring from a backup after a ROM upgrade is possible, however it is highly NOT recommended.

I have recently been successful in using Sprite Backup to perform a complete backup of all applications without any camera issues. This seems like the safest method to go following a hard reset.
Hope this helps.

hi
KyuZo said:
I have recently been successful in using Sprite Backup to perform a complete backup of all applications without any camera issues. This seems like the safest method to go following a hard reset.
Hope this helps.
Click to expand...
Click to collapse
after i use sprite back up. i cant receive text message.

HELP . I was updating the ROM of my QTEK 9090 and during the procedure the SYSTEM of CLIENT froze and I had to interrupt the updating.
Now I have on the screen of the QTEK a "USB - V2. 07" line and the QTEK doesn't react to any imput.
I tried also the soft reset and the hard reset (soft reset + ON/OFF button ?)
What can I do?

i actually just recently tried to restore my device after doing an EXT ROM upgrade and in brought my EXT ROM back to the original one that i had before.....which if you think about it makes sense since your extended rom is within the windows file system if you restore from a back up it puts back whatever was in that file before....so, thats probably why some things won't work properly....i decided not to do the upgrade agian cuz i don't have the time to reinstall everything at the moment....cheers....

The SMS bug is caused by Sprite Backup. If you use an old version after a hard reset of the PPC, you will loose the SMS function.
Solution:
Get the latest Sprite Backup and backup using that and than hard reset the PCC, upgrade the ROM en restore all data.
But I guess it is too late now...
Eternity

Sprite backup and hard reset

I'm not using the original HTC rom.. if I backup with sprite and do a hard reset.. will I be able to restore using the backup I made?
I heard it will cause problems, if I restore. Is this true?

Yes, you can restore as long as it's back to the same ROM. However, if you made a BU just prior to HR, you could introduce the same problems back to your machine that you're trying to correct. If you have a BU when your device was clean, I'd use that instead.

Delta_flyer said:
Yes, you can restore as long as it's back to the same ROM. However, if you made a BU just prior to HR, you could introduce the same problems back to your machine that you're trying to correct. If you have a BU when your device was clean, I'd use that instead.
Click to expand...
Click to collapse
hmm... so are you saying after I hard reset, I should install the ROM I am using now then restore?
I don't have any previous backups

When you hard reset, all you're doing is setting everything back to factory defaults. The ROM you currently have in your device will be the same one after HR. The problem with Sprite BU or any other BU program is,,,it backs up junk too. It's good to make a BU of your device when it's really working well, that way you'll have a known good place to start from. I recently went thru this. After HR, I restored using a BU I created just before HR, the problems I tried to cure with the HR returned after restoring. I ended up rebuilding from scratch.

Delta_flyer said:
When you hard reset, all you're doing is setting everything back to factory defaults. The ROM you currently have in your device will be the same one after HR. The problem with Sprite BU or any other BU program is,,,it backs up junk too. It's good to make a BU of your device when it's really working well, that way you'll have a known good place to start from. I recently went thru this. After HR, I restored using a BU I created just before HR, the problems I tried to cure with the HR returned after restoring. I ended up rebuilding from scratch.
Click to expand...
Click to collapse
I just wanted to know if the hard reset will fix the usb problem I have now.. so if it doesn't I'd rather be in the state I have now.. so.. basically I'm just using this as a test.

Yes it will backup everything.
DVS_WiNdz said:
I just wanted to know if the hard reset will fix the usb problem I have now.. so if it doesn't I'd rather be in the state I have now.. so.. basically I'm just using this as a test.
Click to expand...
Click to collapse
I use Sprite BU when I test out a new ROM. Since I do this frequently and I need my phone for work, I also needed a way to restore my phone to the last good working condition quickly and reliably.
Sprite was my choice because it was already on my first AT&T ROM. Since then I spent the cash and bought the full version. I find it to be snappier when restoring, but that probably has to more to do with the filesystem than anything else.

Delta_flyer said:
When you hard reset, all you're doing is setting everything back to factory defaults. The ROM you currently have in your device will be the same one after HR. The problem with Sprite BU or any other BU program is,,,it backs up junk too. It's good to make a BU of your device when it's really working well, that way you'll have a known good place to start from. I recently went thru this. After HR, I restored using a BU I created just before HR, the problems I tried to cure with the HR returned after restoring. I ended up rebuilding from scratch.
Click to expand...
Click to collapse
hmm..
say I have Dutty's ROM now.. and I do a hard reset.. I will still have Dutty's ROM after the hard reset?

DVS_WiNdz said:
hmm..
say I have Dutty's ROM now.. and I do a hard reset.. I will still have Dutty's ROM after the hard reset?
Click to expand...
Click to collapse
Yes, it doesn't change anything rom wise.
What I'm wondering is how to backup and restore wifi password and settings / email acct's after updating the rom..this is the biggest thing for me.

gman8966 said:
Yes, it doesn't change anything rom wise.
What I'm wondering is how to backup and restore wifi password and settings / email acct's after updating the rom..this is the biggest thing for me.
Click to expand...
Click to collapse
Whenever I restore from a BU, it re-establishes my passwords, at least in BBC. I didn't test my wifi connections before I rebuilt my device last.

Hi,
I'm also on the way to flash the ROM, but I've been putting it off for some time now because of data backup. I do not worry about contacts (Outlook sync), but I would REALLY like to be sure I will not have to reinstall TomTom and NavmanST navigation software together with all the settings (user POI I added myself), sms, MMS etc.
If I understand correctly, doing a backup (Spb, Sprite etc.) before flashing will do me no good, so is there really no way to keep (some of) the installed software in some way?
Any help appreciated...

If I were you I would run two backups; one before and one after the update. And use more than just one backup software, if possible.
BusterTyTN

Won't Reset Automatically

Hi, my Tilt can't auto reset for some reason.
Is this normal?
I have to manually press the soft reset button with the stylus every time
Thanks

are you talking about not auto resetting after installation of a cab or auto resetting in general. The tilt is NOT supposed to automatically reset itself out of the blue. It either needs to be program or user triggered.

Hi thesire
I'm talking about when a program tells it to reset. I hafve sprite backup on it and it says that it will reset before backup. The system turns off but doesn't reset. the only way to turn it back on is if you manually hit the reset button.
This is also the case for installing cabs as I will have to poke the reset manually because it doesn't to it itself

What ROM are you using? This happened with the HTC official 3.03.405.0 (Radio 1.64.06.04)

Oh I think Im using that rom
RUU_Kaiser_HTC_WWE_3.03.405.0_radio_sign_25.70.40.02_1.64.06.04
What rom should I flash to?
thanks

Same Problem
I have the same problem. I am currently on L26 diamond (Hybrid) v5.
Any Ideas???

Weird Problems & Diamond almost dead (software/ROM)

Some days ago, i've flashed my phone to get an "up-to-date" ROM. I chose "PDACornerIllusion 21139" of 2009.03.06. All went fine excepting the keyboard of my GPS wont work anymore (dunno why of course), so i re-flashed with another ROM.
I was surprised that my phone kept the CornerIllusion BootScreen, but i didnt care.
All of a sudden, after having soft reset the ROM i chose (the 2nd one), for an installation of some proggie. The ROM restart as brand new asking me to reset the screen, the clock, date etc... losing all my content and customizations. Then i couldnt sync with Outlook after the first sync i've done minutes ago (error code 800004005). I've decided to soft-reset the phone, and now, TF3D wont even start, (it selft tries to start several times, then gives up), AND the programs lists is all broken, no shortcuts left and the games folder is named *h1/4Eg+ç^, nothing works anymore.
I flashed with about 4 roms (including Aztor one), resulting in the same mess.
Does it have something to do with the first one "PDACornerIllusion 21139" and its still remaining BootScreen?
Can i flash my phone from its roots, to get rid of this ?
As it's maybe not the "fault" of PDACornerIllusion, i write this in this section of the Diamond general thread and made a double post at PDACornerIllusion development thread

I suggest you perform a hard reset before flashing any new rom and that you use the traditional "flash-from-PC-using-ActiveSync-connection" method to flash.
And above all I wish you luck!

What was the other ROM you flashed? I am curious.
rondol1 suggests you hard reset prior to flashing a new rom. I suggest you hard reset after flashing a new rom. Net result is probaby much the same. You could even just do a hard reset now with whatever is loaded and things will probably improve. Main thing is...whenever you flash a rom do a hard reset straight after loading it. I always do this religiously and with the exception of one recent rom I tried I have never had a problem.

First of all, thank you both for trying to suggest hints, i really appreciate it.
I've never hard reset the ROM before or after having installed a new one. I never have a problem before.
For the last 2 months, i was on NEON 1.28, then i've decided it was time to update seeing the new features of the more up-to-date ROMs
I've just reflashed it (an hour ago) with PDACornerIllusion 21139, i've hard reseted before and after. let's see how it turns out ....
I've tried NATALY, CLOUDY, MORNA & AZTOR, no luck with any of them, all died after a soft reset or after the 1st sync (reconnecting for a 2nd sync).
Maybe the problem comes from the very root of the phone (like BIOS in a PC, dunno), maybe something in there got corrupted. How to repair it if my guess exists and is it repairable?

dunnno said:
I've never hard reset the ROM before or after having installed a new one.
Click to expand...
Click to collapse
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.

logger said:
There in lies the problem.
I bet you will be fine from now on. Don't ask why you need to do the hard reset - as no one has been able to give a definitive answer - But it is a well known step that many chefs recommend post flash - just do it from now on and you wont regret it.
Click to expand...
Click to collapse
completely agree with logger - hard reset after you flash any ROM. I haven't used PDACorner - so can't say for sure... but do the flash via CustomRUU once... when the new ROM is flashed... do a hard reset as soon as it's complete..
good luck!

let's see then, >>>>crossing fingers<<<<

I've had this happen a lot lately as well. Might have something to do with the newer SYS? Anyway, hard reseting hasn't always fixed it for me. However, flashing back to the Sprint stock ROM (or HTC stock for you GSM guys) then flashing a new custom ROM has always done the trick. Maybe because the stock ROMs are bigger and "clean" out the memory somehow? At any rate, flash stock and then you're good to go. No permanent damage.

no luck, after a 2nd soft-reset, the phone is asking "touch the screen to configure for the 1sy use blablabla", all data's lost again & again...
what do you mean by stock Rom ? the rom that came with my phone when i've bought it ?

I've got the same problem with the Diamond rebooting like a hard-reset. But I always did a hard-reset after a fresh install. I blamed it on the rom and tried several others, including donsalari's "Clean Basic Rom", the Gen.Y Sense 2.1 and 2.5 versions and an older Aztor rom. Same problem every time, the first reboot after changing the device locale works fine, then I set the whole phone up properly and on the next reboot it will come up as if had performed a hard reset.
Additionally, the file system on my internal storage got corrupted somehow, had to reformat. At some point, I also had the impression that data on the phone memory got lost gradually. First the Contact's numbers got replaced by some nonsense characters, then there were numbers and contacts missing, and finally I had no contacts at all. ActiveSync stopped working so I was in the middle of a trip without my phonebook...
I've got two hypotheses:
1) The Gen.Y bootloader messed with the phone (Had tried the Sense 2.5 Gen.Y rom before donsalari's)
2) Flash controller or Flash itself is broken
@dunnno: I suggest you rename the thread to something like "diamond hard-resets on 2nd reboot after rom install"
edit: oops, just realised I resurrected a very old thread... Maybe there's a fix already?

My diamond still suffers from this problem. I tried it again and again with different roms but everytime, at some point all my configuration is lost and the diamond reboots like after a fresh install. Can anyone please help?

I'm having this problem as well :|
Grr, I have to rely on my phone for so much, but it just doesn't want to work correctly.
Help is immensely appreciated.

Well, I got mine to work, I just flashed the stock HTC ROM and everything has gone back to normal. H3PO, I suggest you give that a shot if you are still having problems.

I had these problems when I first started flashing my Diamond with custom roms.
Now I always flash my carrier stock rom first, then hard reset, then flash custom rom, then hard reset and I never have any problems. I have no idea why flashing the stock rom first stops the problems but I haven't had any problems with the dozens of roms I've flashed using this method.
Also I always flash from internal storage, but others prefer using MTTY

I still have some problems with the Contact Database, but flashing some stock O2 Rom solved the "reboot as new" problem.

soft or hard boot causes factory default reset

help help... i've tried multiple roms, currently using TPC 23053, but this is not a rom related problem perhaps... noodling around setting up my email push and contact sync etc.. invariably my att tilt kaiser becomes rediculously slow, won't show anything interesting on the task menu (if I can even load the task app) forcing me to soft boot or hard boot (tried both.) upon rebooting, it restarts windows with factory defaults -- i have to go through the stylus set up and connections - then it hangs on reboot. same problem with every rom i've tried today and yesterday - tried changing battery, same problem. help.
seems to be slightly more complex. only causes the 'reset' when the system becomes so sluggish that i have to reboot it. a normal reset just after a normal restart reboots normally. this is however predictible behavior with the phone. any ideas? hardware/software issues?
checking to see if my rather large (16gig) storage card has any bearing on the issue by (grudgingly) removing it for a bit to see if it starts to slow down again. - will notify upon any results later today.
definitely not the storage card. had a required soft reboot after making an adjustment and it did it again, losing all of my settings, and hanging, essentially forcing me to do a hard reboot and resetting to factory defaults to clean out whatever garbage it created. (no storage card at all installed.)
I'm at my wits end, thinking extreme thoughts like replacing with a fuze or something. should I try reverting to the old wm3? i upgraded because it too had problems - occasionally erasing my storage card ugh...
hate to be flamed on my first post, glad to see i'm not the only one with the issue, however, it is in very small print and says it is strongly recommended that you flash the ATT/HTC stock rom first, then flash the wm6.5 and that this is a common and known issue with all 6.5 roms... not sure why that isn't made more clear, but I will try it now and see if it solves the problem.
using radio 1.65.21.18
rom [9-20-09]NEW Titanium Ultimate 23053||TPCElite series V11 MEGA Edition wm6.5 23017
wm6.5.1
g: 25.88.40.05H
d: 3.TPCElite
note: upon installation - after touch screen setup - and automatic reset there is an error memstatus.exe missing...quick flash hard to read, but then continues to the sim card import and connections setup wizard.
Please be aware, this rom says you do NOT have to install the factory rom first, i'm trying it anyway...this is a final attempt to keep it from resetting itself and hanging upon reboot - soft or hard.
FYI Installing factory ROM first seems to solve the problem. yay.

Having same problem, multiple ROMs
I have tried TPC Elite, Shifu and a couple of stripped ROMs.
No change, seems fine after first reboot after flash but upon next reboot tilt does a factory reset and starts the install process over.
Multiple messages of files not found at start up. Random files and some of the file names are bizarre special characters.
Will try s STOCK AT&T ROM, but have tried already/
Can memory in phone get corrupt??